Fujitsu FTP-624MCL304, FTP-624DSL113, FTP-624MCL303 User Manual
BATTERY DRIVE, MICRO LINE THERMAL PRINTER
2” TYPE MECHANISM AND INTERFACE BOARD
WITH MINIATURE CUTTER
FTP-624MCL303/304/FTP-624DSL113
■ OVERVIEW
FTP-624MCL303/304 is a high speed, battery driven thermal
printer with a miniature cutter, printing on 2-inch wide paper
(58mm/60mm). A newly developed, long life, compact, light
weight cutter has been partnered with a FTP-624MCL
mechanism to produce this new product.
The design allows easy maintenance, head cleaning, head
replacement, and cutter replacement.
This printer is suitable for a variety of applications, such as
hand held POS terminals, measurement and medical
instruments.
A dedicated LSI (microcontroller) for driving the printer or an
interface board mounting this LSI is also available.
■ HIGHLIGHTS
• Long life
Due to our proprietary cutter driving mechanism, the life of
the cutter is 300,000 cuts.
• High speed printing
It can print at 60 mm/s (480 dotlines) maximum by using
Fujitsu's unique head drive control.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Two types of cut functions
Full and partial cut are possible.
• UL Recognized
File No. E171434
FTP-624MCL303/304
FTP-624CU
FTP-624DSL113
1
■ DESIGNATION
FTP-624MCL303/304/FTP-624DSL113
Part numberItem
Printer mechanism FTP-624MCL303/304*
Interface board (Centronics /RS-232C) FTP624DSL113*
LSI Micro Controller Unit FTP-624CU112
Thermal head cable FTP-624Y001
Parallel interface cable FTP-441Y201
Cables
Serial interface cable FTP-624Y301
Power cables FTP-621Y401
FTP-621Y601
*1: 303 is for front paper insertion (curl path) and 304 is for rear paper insertion (straight path).
*2: Includes ANK+Kanji and Flash Memory.
2
■ GENERAL SPECIFICATIONS
SpecificationsItem
Part number FTP-624MCL303/304
Printing method Thermal-sensitive line dot method
Dot structure 384 dots/line
1
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Paper width (MCL303) 58 mm
Paper width (MCL304) 60 mm
Paper thickness 60 to 100 µ m
Number of columns 32 columns/line (24 × 12 dot font)
Maximum printing speed
Character types ASCII : 31
Character, dimensions (H×W), number of
characters
Interface Centronics / RS-232C (selectable by dip swtich)
480 dotlines/s (60 mm/s)
Conditions: 1 ply, printing on high sensitive thermal paper,
8 columns of “H” /line, double density 16 × 8 dot font,
room temperature, 8.5 VDC drive
JIS ANK : 128 International : 195
JIS KANJI : approximately 6800
24 × 12 dots, (3.0 × 1.5 mm), 32 columns
16 × 8 dots, (2.0 × 1.0 mm), 48 columns
16 × 16 dots, (2.0 × 2.0 mm), 24 columns
24 × 24 dots, (3.0 × 3.0 mm), 16 columns
(Continued)
2
(Continued)
FTP-624MCL303/304/FTP-624DSL113
SpecificationsItem
For head
For motor
Power
supply
Dimensions
Weight (Mechanism) Approximately 280 g
Expected life Wear resistance: 50 km (at 25% print ratio)
Cutter 300,000 cuts minimum
Environmental
conditions
For logic
For cutter Voltage: 5.0 VDC ± 5%
Mechanism 97 (W) × 57 (D) × 38 (H) mm
Interface board 131 (W) × 89 (D) × 24 (H) mm
Mechanism Pulse durability: 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard
Operating temperature 0 to +50°C*
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Voltage: 4.2-8.5 VDC
Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on)
Voltage: 4.2-8.5 VDC
Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC)
Voltage: 5.0 VDC ± 5%
Current: 0.2 A maximum
Current: Approximately 5.0A (in-rush)
Approximately 1.0A (average)
driving method)
1
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter
Recommended thermal sensitive paper
Head-up By microswitch
For front insertion use (58 mm width) : FTP-020PU001, FTP-020P0104/
For rear insertion use (60 mm width) : FTP-020P0020, FTP-020P0105/
In Europe (58 mm width) : FTP-021P0060-45
· Oji Paper : PD150R, PD160R-N, PD170R
· NIPPON Paper : TF50KS-E4,TF60KS-E,TF50KS-E
· MITSUBISHI Paper Mills : P220VBB-1, AFP-235
*1: Guarantee +5°C to +40°C.
P0701
P0702
3
Loading...