Fujitsu FTP-622UCL510, USL547 User Manual
24V DRIVEN RECEIPT PRINTER UNIT
2” PRINTER UNIT
FTP-622UCL510 / USL547
■ OVERVIEW
The FTP-622 UCL/USL Series is 24V driven receipt printer unit
with cutter for 2 inch wide paper. The unit has our high-speed
FTP-622 MCL mechanism, cutter and control board, with an
integrated paper feed and built-in paper guide section.
The receipt printer unit is most suitable for applications such as
POS, ATM, and receipt and ticket issuing printers for various
other equipment.
■ FEATURES
• Unit supported (mounting is easy)
• High speed printer (80mm / sec.)
• Auto cutter included
• Paper near end-detection function
• Low power consumption
■ DESIGNATION
Item
Printer module
Interface
Cables
*1: Interface board is FTP-622DCL111
*2: Interface board is FTP-622DSL112
Parallel (Centronics)
Serial (RS-232C)
Parallel interface
Serial interface
Power for head, motor and logic
Part number
FTP-622UCL510
FTP-622USL547
FTP-622Y201
FTP-622Y301
FTP-622Y401
*1
*2
1
FTP-622UCL510 / USL547
■ SPECIFICATIONS
SpecificationsItem
Part number FTP-622UCL510 FTP-622USL547
Printing method Thermal-sensitive line dot method
Dot structure 448 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 56 mm
Paper width 58 mm
Paper thickness 60 to 100 µm
Cutting type Full or partial
+0
-1
Number of columns 37 columns/line (24×12 dot font)
Maximum printing speed 640 dotlines/s (80 mm/s, 50mm/s, 30mm/s)
Character types
Character composition, dimensions (H×W),
Number of characters
Interface Parallel Serial RS232C
For head 0.87 (1.16) A (at 80 mm/s printing speed, 25% printing ratio)
Power supply
Dimensions 130(W) × 144(D) × 170 (H) mm
Weight (Mechanism + Cutter) Approximately 1 kg
For motor
For cutter
For logic 5VDC ± 5%, 0.5 A maximum
Alphanumeric KANA: 159 International characters: 195
JIS KANJI (FTP-622DCL111, DSL112): approximately 6800
24 × 12 dots, (3.0 × 1.5 mm), 37 columns
24 × 24 dots, (3.0 × 3.0 mm), 18 columns
16 × 8 dots, (2.0 × 1.0 mm), 56 columns
16 × 16 dots, (2.0 × 2.0 mm), 28 columns
24VDC ± 5%, Voltage
Current : average
0.63 (1.16) A (at 50 mm/s printing speed, 25% printing ratio)
0.58 (0.58) A (at 30 mm/s printing speed, 25% printing ratio)
24VDC ± 5%, 1.0 A maximum
1
*
( ): Peak
Mechanism driving method)
Expected life
Cutter 300,000 cuts
Pulse durability : 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard
Wear resistance: 50 km (at 25% printing ratio)
(Continued)
2
Loading...