Fujitsu FTP-622MCL301, FTP-622MCL302 User Manual

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
2” MECHANISM, WITH CUTTER

FTP-622MCL301/302

■ OVERVIEW

FTP-622MCL/FTP-622DCL/DSL Series is an ultra high speed line
thermal printer driven by 24 VDC, printing on 2-inch wide paper
(58 mm/60 mm).

This printer is compact and light weight, and the design allows
easy head maintenance, easy head cleaning and easy head
replacement.

This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, coupon machines, label printers,
medical instruments, etc. A printer with a specially designed cutter
is also available.

NOT FOR NEW

FTP-622MCL301

■ HIGHLIGHTS

• Ultra high speed printing

It can print at 80 mm/s (640 dotlines/s) maximum by using
Fujitsu Components' unique head drive control.

• Compact and lightweight

This printer has a low profile of only 20 mm, and a light weight
of approximately 81 g.

• Low power consumption

The peak current for head driving is approximately 2.3 A (at 80
mm/s printing speed, 50% printing ratio).

• Easy head access

It is designed for easy head cleaning and head replacement.

• Paper auto loading function

Thermal paper can be loaded without head-up lever operation.

• ESC/POS

The commands conform to ESC/POSTM.

• Auto Cutter

Printer with auto cutter (full cut/partial cut) is also available.

• UL Recognized

File No.E171434

DESIGN

TM*1

Commands

FTP-622CU101

FTP-622DCL011

*1 ESC/POSTM is a registered trademark of SEIKO EPSON Corp.

1

■ DESIGNATION

FTP-622MCL301/302

Item

Printer mechanism

Interface board

LSI(MCU)

*1: Constructed with mechanism+cutter+attachment. 301 is for front paper insertion (curl path)
and 302 is for rear paper insertion (straight path).
*2: 011 supports ANK and 101 supports ANK+Kanji.
*3: 012 supports ANK and 111 supports ANK+Kanji, + FLASH memory.
*4: CU101 supports Kanji and cutter control.

With Auto cutter

Centronics Standard with Auto cutter
Serial (RS-232C) standard with auto cutter

Part number
FTP-622MCL301/302
FTP-622DCL011/111
FTP-622DSL011/012

FTP-622CU101

NOT FOR NEW

■ GENERAL SPECIFICATIONS

SpecificationsItem

*1

*2

*3

*4

Part number FTP-622MCL301/302
Printing method Thermal-sensitive line dot method
Dot structure 448 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 56 mm

Paper width

Paper thickness 60~100 µm*
Cutting type full or partial
Number of columns 37 columns/line (24×12 dot font)
Maximum printing speed 640 dotlines/s (80 mm/s)

Character types

Character composition, dimensions (H×W),
Number of characters

DESIGN

MCL301 58 mm
MCL302 60 mm

1

Alphanumeric KANA: 159 International characters: 195
JIS KANJI (FTP-622DCL101/111): approximately 6800

24 × 12 dots, (3.0 × 1.5 mm), 37 columns
24 × 24 dots, (3.0 × 3.0 mm), 18 columns
16 × 8 dots, (2.0 × 1.0 mm), 56 columns
16 × 16 dots, (2.0 × 2.0 mm), 28 columns

(Continued)

2