Fujitsu FTP-621MCL201, FTP-633GA101, FTP-621CU102, FTP-621CDL003, FTP-621MCL202 User Manual
24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
2” MECHANISM
FTP-621MCL201/202
■ OVERVIEW
This thermal printer (driven by 24 VDC) provides high speed printing
for 2-inch wide paper (60 mm). This printer is small in size, light
weight, and has low power consumption. The print head is designed
with open construction for easy maintenance.
This printer is suitable for the variety of applications, such as POS
terminals, ticket machines, label printers, measuring devices and
medical equipment.
In addition to the interface board, a driving LSI (MCU + Gate Array) is
also available.
FTP-621MCL201, 202
■ HIGHLIGHTS
• Ultra high speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control system.
• Compact and lightweight
This printer has a profile of only 28 mm, and a light weight of
approximately 210 g.
• Low power consumption
The peak current for head driving is approximately 2.2 A (at
50 mm/s printing speed, 50% printing ratio).
• Easy head access
Open head construction makes head maintenance easy,
especially for head cleaning.
• Paper auto loading function
The thermal paper can be loaded without head-up lever
operation.
• High resolution
8 dots/mm head provide clear print output.
• Selectable paper paths
Front or rear insertion types are available.
FTP-621CU102, FTP-633GA101
FTP-621DCL003
1
■ DESIGNATION
FTP-621MCL201/202
Item
Front paper insertion type
Printer mechanism
Rear paper insertion type
Interface board
Micro Controller Unit
LSI
Gate Array
■ GENERAL SPECIFICATIONS
SpecificationsItem
Printing method Thermal-sensitive line dot method
Dot structure 432 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 54 mm
Part number
FTP-621MCL201
FTP-621MCL202
FTP-621DCL003
FTP-621CU102
FTP-633GA101
Number of columns 36 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed 800 dotlines/s (100 mm/s) maximum
Character types Semi-graphic : 63 ASCII small characters : 31
Character composition, dimensions (H×W),
Number of columns (standard)
Interface 1) Centronics standard 2) Bus interface*
For head 0.63 (1.11) A (at 50 mm/s printing speed, 25% printing ratio)
Power supply
For motor 24 VDC ± 5%, 1.0 A maximum
For logic 5 VDC ± 5%, 0.5 A maximum
Weight Mechanism: approximately 210 g. Interface board: approximately 100 g
Dimensions
Mechanism 105 (W) × 48 (D) × 28.0 (H) mm (excluding connector)
Interface board 140 (W) × 89 (D) × 24.0 (H) mm
JIS ANK : 128 International characters : 130
Download : 384
24 × 12 dots, (3.0 × 1.5 mm), 36 columns
32 × 16 dots, (4.0 × 2.0 mm), 27 columns
24 × 24 dots, (3.0 × 3.0 mm), 18 columns
32 × 32 dots, (4.0 × 4.0 mm), 13 columns
1
24VDC ± 5%, average:*
0.41 (0.56) A (at 25 mm/s printing speed, 25% printing ratio)
1.23 (1.65) A (at 100 mm/s printing speed, 25% printing ratio)
( ): Peak
2
(Continued)
2
Loading...