Fujitsu FTP-621MCL101, FTP-621DCL002, FTP-621MCL102 User Manual

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
2” MECHANISM

FTP-621MCL101/102

■ OVERVIEW

This thermal printer (driven by a 24 VDC) provides ultra-high speed
printing on 2-inch wide paper (60 mm). This printer is small in size,
light weight, and has low power consumption. The print head is
designed with open construction for easy maintenance.

This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, label printers, measuring devices and
medical equipment.

In addition to the interface board, a driving LSI (MCU + Gate Array) is
also available.

■ HIGHLIGHTS

• Ultra high speed printing

It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control system.

• Compact and lightweight

This printer has a low profile of only 28 mm, and a light weight of
approximately 210 g.

• Low power consumption

The peak current for head driving is approximately 3.5 A (at 50
mm/s printing speed, 50% printing ratio).

• Easy head access

Open head construction makes head maintenance easy,
especially for head cleaning.

• Paper auto loading function

The thermal paper can be loaded without head-up lever
operation.

• High resolution

8 dots/mm head provides clear print output.

• Selectable paper paths

Front or rear insertion types are available.
FTP-621MCL102 can print on paper thicknesses of up to 150 µm.

FTP-621MCL101, 102

FTP-621CU102, FTP-633GA101

FTP-621DCL002

1

■ DESIGNATION

FTP-621MCL101/102

Item

Front paper insertion type

Printer mechanism

Rear paper insertion type (supports thick paper)

Interface board

Micro Controller Unit

LSI

Gate Array

■ GENERAL SPECIFICATIONS

SpecificationsItem

Printing method Thermal-sensitive line dot method
Dot structure 448 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 56 mm

Part number
FTP-621MCL101
FTP-621MCL102
FTP-621DCL002

FTP-621CU102
FTP-633GA101

Number of columns 37 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed 800 dotlines/s (100 mm/s) maximum

JIS ANK : 128 International characters : 130

Character types Semi-graphic : 63 ASCII small characters : 31

Character composition, dimensions (H×W),
Number of columns (standard)

Interface 1) Centronics standard 2) Bus interface*

For head 0.43 (1.72) A (at 50 mm/s printing speed, 25% printing ratio)

Power supply

For motor 24VDC ± 5%, 1.0 A maximum
For logic 5VDC ± 5%, 0.5 A maximum

Weight Mechanism: approximately 210 g. Interface board: approximately 100 g

Dimensions

Mechanism 105 (W) × 48 (D) × 28.0 (H) mm (excluding connector)
Interface board 140 (W) × 89 (D) × 24.0 (H) mm

Download : 384
24 × 12 dots, (3.0 × 1.5 mm), 37 columns

32 × 16 dots, (4.0 × 2.0 mm), 28 columns
24 × 24 dots, (3.0 × 3.0 mm), 18 columns
32 × 32 dots, (4.0 × 4.0 mm), 14 columns

1

24VDC ± 5%, average:*

0.25 (1.29) A (at 25 mm/s printing speed, 25% printing ratio)

1.66 (3.01) A (at 100 mm/s printing speed, 25% printing ratio)
( ): Peak

2

(Continued)

2

(Continued)

FTP-621MCL101/102

SpecificationsItem

Thermal head life

driving method)

Pulse durability : 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard
Wear resistance: 50 km (at 25% printing ratio)

3

Environmental
conditions

Operating temperature +5 to +40°C*
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)

Detection Paper out/Mark detect By photointerrupter (command set)

Head-up By microswitch

Paper width 60 mm

Recommended thermal sensitive

5

paper*

+0
–1

1 ply paper in roll : FTP-020P0020
Thicker paper in roll : FTP-020PJ102*

4

*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame

memory). The communication is parameter transfer.
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0° to +40°C.
*4: Printer mechanism FTP-621MCL102 is to be used.
*5: Please contact us for other thermal papers.

3

■ DIMENSIONS

Printer mechanism

28

FTP-621MCL101/102

107

21.9

14.2

40.5

48

35.5

39.6

81.2

(Paper center)

2.5

48 (Head-up)

R26

Location hole
for fixing

2-M3 burring

(300)7.5

Paper insertion

Y

Y

69.8

Y-Y SECTION

(FTP-621MCL101) (FTP-621MCL102)

3-M3 fixing screw (reference)

11.8

Paper insertion

Head open

Unit: mm

4

Interface board

FTP-621MCL101/102

139.7

129.6

113.1

73.7

88.9

(5.1)

(5.1)

78.8

(5.1)

22.9

CN5 CN1

14.0

14.0

CN3 CN4

47.1

4—ø36

CN9

CN2

CN7

28.0

CN11

25.4

CN10

(5.1)

(5.1)

88.9

17

1.6
5

Height of devices side

Height of solder side

■ INTERFACE, COMMAND, OPTIONS

Please refer to the FTP-621DCL002/012 DATA SHEET for Interface, Command, and Options.

23.6

Unit: mm

5

FTP-621MCL101/102

Europe

Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fceu.fujitsu.com

Asia Pacific

Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: [phone]
Fax: [phone]
Email: [e-mail]
www.fcal.fujitsu.com

Fujitsu Components
International
Headquarter
Offices

Japan

Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
T okyo 141, Japan
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fcl.fujitsu.com

North and South America

Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fcai.fujitsu.com

© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 09/2001

6