24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
2” MECHANISM, WITH AVAILABLE CUTTER
FTP-621MCL351/352
■ OVERVIEW
This thermal printer (driven by 24 VDC) and cutter provide high
speed printing for 2-inch wide paper (60 mm). This printer is
small in size, light weight, and has low power consumption.
The print head is designed with open construction for easy
maintenance.
This printer is suitable for a variety of applications, such as
POS terminals, ticket machines, label printers, measuring
devices and medical equipment.
In addition to the interface board, a driving LSI (MCU + Gate
Array) is also available.
■ HIGHLIGHTS
• Ultra high speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control system.
• Auto cutter
Full or partial cutting are available by normal or reverse
rotation of the motor (command set).
• Low power consumption
The peak current for head driving is approximately 2.2 A (at
50 mm/s printing speed, 50% printing ratio).
• Easy head access
Open head construction makes head maintenance easy,
especially for head cleaning.
• Paper auto loading function
The thermal paper can be loaded without head-up lever
operation.
• High resolution
8 dots/mm head provide clear print output.
• Selectable paper paths
Front or rear insertion types are available.
FTP-621MCL351/352 shown after
assembly with FTP-621CT001cutter
FTP-621CU102, FTP-633GA101
FTP-621DCL013
1
■ DESIGNATION
FTP-621MCL351/352
Item
Front paper insertion type
Printer mechanism
Rear paper insertion type
Cutter
Interface board
Micro Controller Unit
LSI
Gate Array
■ GENERAL SPECIFICATIONS
SpecificationsItem
Printing method Thermal-sensitive line dot method
Dot structure 432 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Part number
FTP-621MCL351
FTP-621MCL352
FTP-621CT001
FTP-621DCL013
FTP-621CU102
FTP-633GA101
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 54 mm
Number of columns 36 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed 800 dotlines/s (100 mm/s) maximum
Character types Semi-graphic : 63 ASCII small characters : 31
Character composition, dimensions (H×W),
Number of columns (standard)
Interface 1) Centronics standard 2) Bus interface*
Cutting method Guillotine method
Cutting type Full-cut or partial cut (command set)
Cutter
Minimum cut length 20 mm
Paper thickness 65 to 150 µm
JIS ANK : 128 International characters : 130
Download : 384
24 × 12 dots, (3.0 × 1.5 mm), 36 columns
32 × 16 dots, (4.0 × 2.0 mm), 27 columns
24 × 24 dots, (3.0 × 3.0 mm), 18 columns
32 × 32 dots, (4.0 × 4.0 mm), 13 columns
1
(Continued)
2
(Continued)
FTP-621MCL351/352
Item
24 V DC ± 5%, average:*
Specifications
2
0.41 (0.56) A (at 25 mm/s printing speed, 25% printing ratio)
For head 0.63 (1.11) A (at 50 mm/s printing speed, 25% printing ratio)
Power supply
1.23 (1.65) A (at 100 mm/s printing speed, 25% printing ratio)
( ): Peak
For motor 24 VDC ± 5%, 1.0 A maximum
For logic 5 VDC ± 5%, 0.5 A maximum
Weight Mechanism with cutter: approx. 450 g. Interface board: approx. 100 g
Dimensions
driving method)
Life
Mechanism + cutter 107 (W) × 60 (D) × 71.0 (H) mm (excluding connector)
Interface board 140 (W) × 89 (D) × 24.0 (H) mm
Thermal head
Pulse durability : 5 × 107 pulse/dot (using Fujitsu Takamisawa's standard
Wear resistance: 50 km (at 12.5% printing ratio)
Cutter Cutting life: 3 × 105 times
3
Environmental
conditions
Operating temperature +5 to +40°C*
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor (applied energy control, abnormal temperature detection)
Detection Paper out/Mark detect By photointerrupter (command set)
Head-up By microswitch
Paper width 60 mm
Recommended thermal sensitive
4
paper*
+0
–1
1 ply paper in roll: FTP-020P0020
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.
*4: Please contact us for other thermal papers.
3
■ DIMENSIONS
Printer mechanism with cutter
FTP-621MCL351/352
Unit: mm
107
81.2 (Mounting hole)
39.6 (Center of paper & connector)
14.2
21.9
68 (At cutter open)
2.5 (Mounting hole)
JAPAN
35.5 (Mounting hole)
40.5127.5 (300)
(Mounting screw)
71
(76)
Y-Y SECTION
330
Y
2-M3 burring
<FTP-621MCL351>
11.8
25.4
<FTP-621MCL352>
Notes:
All dimensions are nominal value.
Y
69.8
Paper insertion
60
Paper insertion
4
Interface board
FTP-621MCL351/352
139.7
129.6
113.1
88.9
(5.1)
(5.1)
78.8
(5.1)
22.9 14.0
CN3 CN4 CN2
CN5 CN1
14.0
CN6
31.8
22.3 27.4
15.3
4—ø3.6
CN12 CN13
CN7
28.0
CN11
25.4
CN10
(5.1)
(5.1)
88.9
17
1.6
5
Height of devices side
Height of solder side
■ INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-621DCL003/013 DATA SHEET for Interface, Command, and Options.
23.6
Unit: mm
5
FTP-621MCL351/352
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info.marketing@fceu.fujitsu.com
Web: www.fceu.fujitsu.com
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 375-8560
Fax: (65) 273-3021
Email: fcal@fcal.fujitsu.com
www.fcal.fujitsu.com
Fujitsu Components
International
Headquarter
Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: marcom@fcai.fujitsu.com
Web: www.fcai.fujitsu.com
© 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 09/2001
6
Loading...