Fujitsu FTP-607 User Manual

24v driveN, FTP-607 Series

2” HiGH SPeed THerMaL PriNTer

FTP-627MCL401/601

n Overview

The FTP-627 MCL Series are 24V driven high-speed printers

with a ultra low prole auto cutter and long life.

The FTP-627 MCL Series can be used for a variety of
applications, such as POS terminals, ticket vending machines,
label printers, banking terminals, and measurement and
medical equipment.

n HiGHLiGHTS

• Ultralowprole

Height 21.8 mm, width 81.2 mm, depth 42.2 mm

• Highspeedprinting

It can print at 100/150 mm/s (800/1,200 dotlines/s)

maximum by using Fujitsu's unique head drive control.

• AutoCutter

Long life and high reliable guilotine with dedicated motor.

• Easypapersetting

Our lever platen release mechanism allows a
wide paper route, so paper can be easily inserted.
Conventional auto loading is also available.

• Multifunctionaldie-castframe

Wide operating temperature range, long continuous
printing, high ESD absorbtion and discharge of static
electricity vibration and shock resistant.

• RoHScompliant

FTP-627MCL401/601

FTP-627DSL291R

FTP-627DSL601R

1

n ParT NuMberS

Part Number

Easy Load Model with low prole cutter FTP-627MCL401

FTP-627MCL601

LSI for driving MCL401 FTP-627CU301R

MCL601 FTP-627CU601R

Interface
board for
Mech/Cutter

Interface
cables

Power

cables

Cutter
supported

Parallel (Centronics) FTP-628Y202
Serial (RS232C) FTP-628Y302
USB FTP-629Y301
Logic FTP-629Y401
Head, motor FTP-629Y601

MCL401 FTP-627DSL291R Parallel (Centronics) /Serial (RS-232C)
MCL401 FTP-627DSL603R USB (V1.1)

FTP-627DSL605R Serial (RS-232C)

MCL601 FTP-627DSL613 R USB (V1.1)

FTP-627DSL615 R Serial (RS-232C)

FTP-627MCL401/601

n SPeCiFiCaTiONS

SpecicationsItem

Part number FTP-627MCL401/601

Printing method Thermal-line dot method

Dot structure 432 dots/line

Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density

Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch

Effective printing area 54 mm

Number of columns ANK 36 columns/line
(maximum 12/24 dot font)

Paper width 58 mm

Paper thickness 60 to 85 µm (some paper in this range may not be
used because of paper characteristics)

Printing Speed Maximum 100mm/sec. (800 dot line/sec.)
Maximum 150mm/sec. (1,200 dot line/sec.)

Alphanumeric, kana: 159 types

Character types

International characters: 195 types
JIS Kanji (Kanji CG loaded board): about 6800 types

MCL401
MCL601

12 × 24 dots, (1.5 × 3.0 mm), 36 columns: ANK

Character, dimensions (W×H), number
24 × 24 dots, (3.0 × 3.0 mm), 18 columns: ANK

of columns
8 × 16 dots, (1.0 × 2.0 mm), 54 columns: ANK

16 × 16 dots, (2.0 × 2.0 mm), 27 columns: ANK

2

FTP-627MCL401/601

n SPeCiFiCaTiONS

Item Specication
Iterface Conforms to RS232C/Centronics / USB
Power supply For print head MCL401 24 VDC average current, 0.4A (0.9 A peak)

(print ratio: 12.5%, print speed 100mm/sec.)

MCL601 24 VDC average current 0.5 A (0.9 A peak)

For motor MCL401 24 VDC ±5%, 1 A maximum

MCL601 24 VDC ±5%, 1.1 A maximum

For cutter MCL401 24 VDC ±5%, 1 A maximum

MCL601 24 VDC ±5%, 1.3 A maximum

For logic 3.3 to 5.25 VDC, 0.1 A maximum

Dimensions Mechanism with cutter 81.2 x 42.2 x 21.8 mm (WxDxH)

Interface
board

Weight Mechanism with cutter Approximately 100g

Interface board Approximately 50g

Life Head MCL401 Pulse durability: 50 million pulses/dot (print ratio: 25%).

Cutter MCL401 500,000 cuts

Platen 5,000 times (open/close)

Operating
environment

Detection
function

Operating temperature* 0ºC to +50ºC
Operating humidity 20 to 85% RH (no condensation)
Storage temperature -20ºC to +60ºC (paper not included)
Storage humidity 5 to 95% RH (no condensation)
Head temperature

detection
Paper out/mark

detection
Platen release Detected by sliding switch

Recommended thermal sensitive paper High sensitive paper TF50KS-E4 (Nippon paper)

*+5˚C to +40˚C printing density assurance rance.

DSL291 70 x 60 x 12 mm (WxDxH)
DSL6xx 95 x 70 x 21.6 mm (WxDxH)

MCL601 Pulse durability: 100 million pulses/dot (print ratio: 25%).
MCL401 Abrasion resistance: paper traveling distance 50km
MCL601 Abrasion resistance: paper traveling distance 100km

MCL601 1,000,000 cuts

Detected by thermistor

Detected by photo-interruptor

Standard paper TF60KS-E (Nippon paper),

FTP-020PU001 (58mm)

PD150R (Oji paper)
FTP-020PU701 (58mm)

Medium life storage

paper

TF60KS-F1 (Nippon paper)

FTP-020P0102 (58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)

Long life storage

paper

PD160R (Oji paper)
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)

3