To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts
its warranties and its liability for the EMA-MB91F465P-NLS-176M07 Board and all its deliverables
(e.g. software include or header files, application examples, target boards, evaluation boards,
engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the
Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase
Agreement under which agreements the Product has been delivered, (ii) the technical descriptions
and (iii) all accompanying written materials. In addition, to the maximum extent permitted by
pplicable law, Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the
a
performance of the Product and any consequential damages in cases of unauthorised decompiling
and/or reverse engineering and/or disassembling. Note, the EMA-MB91F465P-NLS-176M07 Board
and all its deliverables are intended and must only be used in an evaluation laboratory
environment.
1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in
accordance with the accompanying written materials for a period of 90 days form the date of
receipt by the customer. Concerning the hardware components of the Product, Fujitsu
Microelectronics Europe GmbH warrants that the Product will be free from defects in material
and workmanship under use and service as specified in the accompanying written materials
for a duration of 1 year from the date of receipt by the customer.
2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability
and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s
sole discretion, either return of the purchase price and the license fee, or replacement of the
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in
original packing and without further defects resulting from the customer’s use or the transport.
However, this warranty is excluded if the defect has resulted from an accident not attributable
to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the
customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.
3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH
disclaims all other warranties, whether expressed or implied, in particular, but not limited to,
warranties of merchantability and fitness for a particular purpose for which the Product is not
designated.
4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s
and its supplier’s liability are restricted to intention and gross negligence.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES
To the maximum extent permitted by applicable law, in no event shall Fujitsu
Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever
(including but without limitation, consequential and/or indirect damages for personal
injury, assets of substantial value, loss of profits, interruption of business operation,
loss of information, or any other monetary or pecuniary loss) arising from the use of
the Product.
Should one of the above stipulations be or become invalid and/or unenforceable, the remaining
stipulations shall stay in full effect
The EMA-MB91F465P-NLS-176M07 in combination with the EMA-MB91V460A-002B/80/003 or EMA-MB91FV460B-001 is a development system for the Fujitsu FR60 MB91V460
Flash microcontroller.
The development system allows the designer immediately to start with the software
development before MB91V460 based silicon samples are available.
This board must only be used for test applications
in an evaluation laboratory environment.
Before using the EMA-MB91F465P-NLS-176M07 adapter board, make sure that the
following packed components have been delivered:
The EMA-MB91F465P-NLS-176M07 in combination with the EMA-MB91V460A-002B/80/003 or EMA-MB91FV460B-001 replaces a MB91F465P microcontroller. For further
details of the EMA-MB91V460A-002B/-80/003 or EMA-MB91FV460B-001 board please refer
to the User Guide of the EMA-MB91V460A-002B/-80/003 or EMA-MB91FV460B-001.
1.3 Functional Restrictions
1.3.1 Valid for EMA-MB91V460A-002B/-80/003
This probe cable can only be used for the following Microcontroller configuration:
1. VDD5 = 5V, VDD35 = 5V
2. VDD5 = 3.3V, VDD35 = 3.3V
While using this probe cable, there is no restriction on GPIO functionality for the above
mentioned MCU configuration!
The following ports are not routed to the target board with this socket adapter:
This chapter describes all jumpers that can be modified or accessed on the EMAMB91F465P-NLS-176M07 board. The default setting is shown with a grey shaded area.
The following product pollution control information is provided according to SJ/T11364-2006
Marking for Control of Pollution caused by Electronic Information Products.
1
.电子信息产品污染控制标志说明
该标志表明本产品含有超过中国标准
2006
《电子信息产品中有毒有害物质的限量要求》中限量的有毒有害物质。标志中的数字为
本产品的环保使用期,表明本产品在正常
用户使用本产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限,单位为年。
评估板
仿真板
Explanation of Pollution Control Label
SJ/T11363-
使用的条件下,有毒有害物质不会发生外泄或突变,
为保证所申明的环保使用期限,应按产品手册中所规定的环境条件和方法进行正常使用,并严
格遵守产品维修手册中规定的定期维修和保养要求。
产品中的消耗件和某些零部件可能有其单独的环保使用期限标志,并且其环保使用期限有可能
比整个产品本身的环保使用期限短。应到期按产品维修程序更换那些消耗件和零部件,以保证
所申明的整个产品的环保使用期限。
本产品在使用寿命结束时不可作为普通生活垃圾处理,应被单独收集妥善处理。
请注意:环保使用期限50年的指定不是与产品的耐久力,使用期限或任何担保要求等同的。
This symbol to be added to all EIO sold to China, indicates the product contains hazardous
materials in excess of the limits established by the Chinese standard SJ/T11363-2006
Requirements for Concentration Limits for Certain Hazardous Substances in Electronic
Information Products. The number in the symbol is the Environment-friendly Use Period
(EFUP), which indicates the period, starting from the manufacturing date, during which the
toxic or hazardous substances or elements contained in electronic information products will
not leak or mutate under normal operating conditions so that the use of such electronic
information products will not result in any severe environmental pollution, any bodily injury or
damage to any assets, the unit of the period is “Year”.
In order to maintain the declared EFUP, the product shall be operated normally according to
the instructions and environmental conditions as defined in the product manual, and periodic
maintenance schedules specified in Product Maintenance Procedures shall be followed
strictly.
Consumables or certain parts may have their own label with an EFUP value less than the
product. Periodic replacement of those consumables or parts to maintain the declared EFUP
shall be done in accordance with the Product Maintenance Procedures.
This product must not be disposed of as unsorted municipal waste, and must be collected
separately and handled properly after decommissioning.
Please note: The designation of 10 years EFUP is not
to be equated with the durability, use-
duration or any warranty-claims of the product.
产品中有毒有害物质或元素的名称及含量
Table of hazardous substances name and concentration
有毒有害物质或元素
部件名称
EMA-MB91F465P-NLS-
176M07
O:
表示该有毒有害物质在该部件所有均质材料中的含量均在
X:
表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
•
此表所列数据为发布时所能获得的最佳信息
•
由于缺少经济上或技术上合理可行的替代物质或方案,此医疗设备运用以上一些有毒有害物质来实现设备的预期
铅
(Pb)
oooooo
(Hg)
Hazardous substances name
汞
镉
(Cd)
SJ/T11363-2006
(Cr(VI))
SJ/T11363-2006
六价铬
标准规定的限量要求以下
多溴联苯
(PBB)
标准规定的限量要求
多溴二苯醚
(PBDE)
临床功能,或给人员或环境提供更好的保护效果
。
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.
•Data listed in the table represents best information available at the time of publication