Fujitsu FPCM21621, FPCM21622, U820 - LifeBook Mini-Notebook - Atom 1.6 GHz, LifeBook U820 User Manual

User’s Guide
Learn how to use
your Fujitsu LifeBook U820 notebook
Copyright and Trademark Information
Fujitsu, the Fujitsu logo, and LifeBook are registered trademarks of Fujitsu Limited.
Intel and Atom are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
Microsoft, Windows, Windows Vista, and OneNote are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
ArcSoft WebCam Companion is a trademark of ArcSoft, Inc.
Bluetooth is a trademark of Bluetooth SIG, Inc., USA.
ENERGY STAR and the ENERGY STAR certification mark are registered trademarks of the U. S. Government.
OmniPass is a trademark of Softex, Inc.
Realtek is a trademark of Realtek Semiconductor Corporation.
AT&T, the AT&T logo, AT&T slogans, and other AT&T product/service names and logos are trademarks and service marks of AT&T Intellectual Property or AT&T affiliated companies.
Atheros and Super AG are registered trademarks of Atheros Communications.
Adobe, Acrobat, and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
All other trademarks mentioned herein are the property of their respective owners.
© Copyright 2008 Fujitsu Computer Systems Corporation. All rights reserved.
No part of this publication may be copied, reproduced, or translated, without prior written consent of Fujitsu. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu. B5FJ-8471-02ENZ0-00
WARNING
HANDLING THE CORD ON THIS PRODUCT WILL EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE S
TATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.
W
ASH HANDS AFTER HANDLING.
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name: Fujitsu Computer Systems Corporation Address: 1250 E. Arques Avenue, M/S 122
Sunnyvale, CA 94085 Telephone: (408) 746-6000 Declares that product: Base Model Configuration:
LifeBook U820 notebook
Complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT SAFETY INSTRUCTIONS
This unit requires an AC adapter to operate. Use only UL Listed I.T.E. Class II Adapters with an output rating of 16 VDC, with a minimum current of 2.5 A (40 W).
When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a
swimming pool.
Avoid using a modem during an electrical storm. There may be a remote risk of electric shock from lightning.
Do not use a modem to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with
local codes for possible special disposal instructions.
To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified Telecommunication Line Cord.
For TV tuner use: To protect from overvoltages and transients on the Cable Distribution System, make sure that the outer shield of
the coaxial cable is connected to earth (grounded) at the building premise as close to the point of cable entrance as practicable, as required per NEC Article 820.93, ANSI/NFPA 70: 2005. If you have questions about your CATV installation, contact your service provider.
SAVE THESE INSTRUCTIONS
For Authorized Repair Technicians Only
DANGER OF EXPLOSION IF LITHIUM (CLOCK) BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY
WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE MANUFACTURERS INSTRUCTION.
F
OR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH THE SAME TYPE AND
RATING FUSE.
+
AC adapter output polarity:
Recycling your battery
Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries. When this occurs, you may want to replace the battery with a fresh one*. If you replace it, it is important that you dispose of the old battery properly because batteries contain materials that could cause environmental damage if disposed of improperly.
Fujitsu is very concerned with environmental protection, and has enlisted the services of the Rechargeable Battery Recycling Corporation (RBRC)**, a non-profit public service organization dedicated to protecting our environment by recycling old batteries at no cost to you.
RBRC has drop-off points at tens of thousands of locations throughout the United States and Canada. To find the location nearest you, go to www.RBRC.org
or call 1-800-822-8837.
If there are no convenient RBRC locations near you, you can also go to the EIA Consumer Education Initiative website (http://EIAE.org/
) and search for a convenient disposal location.
Remember – protecting the environment is a cooperative effort, and you should make every effort to protect it for current and future generations.
* To order a new battery for your Fujitsu mobile computer, go to the Fujitsu shopping site at www.shopfujitsu.com
in the US or
www.fujitsu.ca/products/notebooks
in Canada.
** RBRC is an independent third party to which Fujitsu provides funding for battery recycling. RBRC is in no way affiliated with
Fujitsu.
Contents
Preface
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Conventions Used in the Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Fujitsu Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Chapter 1 Getting to Know Your LifeBook
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Locating the Controls and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Top Components (notebook mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Top Components (tablet mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Left-Side Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Right-Side Panel Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Bottom Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Status Indicator Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Display Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Opening the Display Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Using the System as a Tablet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Adjusting Display Panel Brightness. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Changing Touch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Using the Fujitsu Zoom Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
7
Handling the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using in Notebook Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using in Tablet Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using the Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Using the Cursor Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Button Control Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Using the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Clicking on Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Right-Clicking on Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Double-Clicking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Calibrating the Touch Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Dragging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Controlling the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
LifeBook Application/Tablet PC Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Button functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Changing Tablet PC Button Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Chapter 2 Getting Started with Your LifeBook
Power Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Connecting the Power Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Starting Your LifeBook Notebook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Power On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Hard Disk Drive Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
8
Booting the System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Starting Windows Vista the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Starting Windows XP the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Registering Your LifeBook notebook with Fujitsu . . . . . . . . . . . . . . . . . . 60
Installing ClickMe!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Fujitsu Driver Update Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Power/Suspend/Resume Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Hibernation (Save-to-Disk) Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Windows Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Restarting the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Powering Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
ENERGY STAR® Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Chapter 3 User-Installable Features
Lithium ion Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Recharging the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Replacing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Secure Digital (SD) Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Inserting/Removing an SD Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Compact Flash (CF) Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Inserting/Removing Compact Flash Cards. . . . . . . . . . . . . . . . . . . . . . . . . 75
Device Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Universal Serial Bus Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Microphone Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
External Video Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
LAN (RJ-45) Jack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Port Replicator Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
9
Chapter 4 Troubleshooting Your LifeBook
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Identifying the Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Specific Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Power On Self Test Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Restoring Your Pre-installed Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Re-installing Individual Drivers and Applications. . . . . . . . . . . . . . . . . . . 98
Restoring the Operating System for Windows Vista Systems . . . . . . . . . . 99
Restoring the Operating System for Windows XP Systems. . . . . . . . . . . . 102
Automatically Downloading Driver Updates . . . . . . . . . . . . . . . . . . . . . . . 102
Chapter 5 Care and Maintenance
Caring for your LifeBook Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Cleaning your LifeBook notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Storing your LifeBook notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Traveling with your LifeBook notebook . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Media Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Chapter 6 System Specifications
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Configuration Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Microprocessor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Chipset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Memory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Mass Storage Device Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Device Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
10
Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Dimensions and Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Popular Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Pre-Installed Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Learning About Your Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
Glossary/Regulatory
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Appendix A: Wireless Device User’s Guide
Before Using the Wireless LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Wireless LAN Device Covered by this Document. . . . . . . . . . . . . . . . . . . 140
Characteristics of the WLAN Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Wireless LAN Modes Using this Device . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Deactivating/Disconnecting the WLAN Device . . . . . . . . . . . . . . . . . . . . 143
Deactivation Using the Wireless On/Off Switch . . . . . . . . . . . . . . . . . . . . 144
Disconnection Using the Icon in the Taskbar. . . . . . . . . . . . . . . . . . . . . . . 144
Activating the WLAN Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Configuring the Wireless LAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Configuring the WLAN Using Windows Vista . . . . . . . . . . . . . . . . . . . . . 145
Configuring the WLAN Using Windows XP . . . . . . . . . . . . . . . . . . . . . . 146
Connection to the network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
Troubleshooting the WLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
11
WLAN Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Using the Bluetooth Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
What is Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Where to Find Information About Bluetooth . . . . . . . . . . . . . . . . . . . . . . . 151
Appendix B: Fingerprint Sensor Device
Introducing the Fingerprint Sensor Device . . . . . . . . . . . . . . . . . . . . . . . . 153
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Installing OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Uninstalling OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
User Enrollment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Using OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Configuring OmniPass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
OmniPass Control Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171
12
Preface
About This Guide
The LifeBook U820 notebook from Fujitsu Computer Systems Corporation is an ultra-mobile convertible computer. It can be used either as a standard notebook using keyboard input, or in tablet configuration using pen input. It is powered by an Intel® Atom™ Z530 processor, has a built-in color display with a passive digitizer, and brings the computing power of desktop personal computers (PCs) to a handheld, versatile environment.
This manual explains how to operate your LifeBook U820 notebook’s hardware and pre-installed system software. Your LifeBook U820 notebook comes with Windows Vista® Business or Windows Vista Home Premium pre-installed.
Conventions Used in the Guide
Keyboard and on-screen keys appear in brackets. Example: [Fn], [F1], [ESC], [ENTER] and [CTRL]. Pages with additional information about a specific topic are cross-referenced within the text.
For example: (“See Installation Procedure on page 43”.) Note that all cross-references are linked to the referenced items, so by clicking the link, you will automatically go to the referenced item or page.
NOTE THAT THERE ARE REFERENCES TO MICROSOFT WINDOWS XP THROUGHOUT THIS DOCUMENT
FOR USERS WHO HAVE INSTALLED IT ON THEIR SYSTEM.
13
- About This Guide
On-screen menu items appear in bold. Example: “Click Fujitsu Menu, and select your choice”.
Fujitsu Contact Information
Service and Support
You can contact Fujitsu Service and Support in the following ways:
Toll free: 1-800-8Fujitsu (1-800-838-5487)
E-mail: 8fujitsu@us.fujitsu.com
Website: http://www.computers.us.fujitsu.com/support
Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name
Product configuration number
Product serial number
THE INFORMATION ICON HIGHLIGHTS INFORMATION THAT WILL ENHANCE YOUR UNDERSTANDING OF
THE SUBJECT MATERIAL.
T
HE CAUTION ICON HIGHLIGHTS INFORMATION THAT IS IMPORTANT TO THE SAFE OPERATION OF YOUR COMPUTER, OR TO THE INTEGRITY OF YOUR FILES. PLEASE READ ALL CAUTION INFORMATION CAREFULLY.
T
HE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU, YOUR
L
IFEBOOK NOTEBOOK, OR YOUR FILES. PLEASE READ ALL WARNING INFORMATION CAREFULLY.
14
- About This Guide
Purchase date
Conditions under which the problem occurred
Any error messages that have occurred
Type of device connected, if any
Fujitsu Shopping Online
You can go directly to the online by going to the website at: www.shopfujitsu.com.
Limited Warranty
Your LifeBook U820 ultra-mobile notebook is backed by a Fujitsu International Limited Warranty. Check the service kit that came with your notebook for the Limited Warranty period and terms and conditions.
YOU MUST HAVE AN ACTIVE INTERNET CONNECTION TO USE THE ONLINE URL LINKS.
15
Chapter 1
Getting to Know Your LifeBook
Overview
This section describes the components of your Fujitsu LifeBook U820 notebook. We strongly recommend that you read it before using your notebook – even if you are already familiar with notebook computers.
Figure 1. Fujitsu LifeBook U820 notebook
16
- Locating the Controls and Connectors
Locating the Controls and Connectors
Connectors and peripheral interfaces on the LifeBook U820 notebook and the optional port replicator allow you to connect and control a variety of devices. Specific locations are illustrated in Figures 2 through 6. The table below provides a short description of each icon on the LifeBook U820 notebook and/or optional port replicator. Each of the icons is either molded into or printed on the notebook or port replicator chassis.
Connection Notebook
Icon
Purpose
DC in connector Connect an external power source such as the AC adapter or auto/airline
adapter.
Secure Digital (SD) Slot
Insert an SD flash memory card for data storage. Flash memory cards allow you to transfer data to and from a variety of different digital devices.
USB Port Connect Universal Serial Bus 2.0 or 1.1 compliant devices to the
notebook.
Microphone Jack Connect an external microphone. The internal microphone is disabled
when you plug in an external microphone.
Headphone Jack Connect stereo headphones or powered external speakers. The internal
speaker is disabled when you plug in external headphones or powered speakers.
Suspend/ Resume button
The Power/Suspend/Resume button allows you to suspend notebook activity without powering off, resume your notebook from suspend mode, and power on the system when it has been shut down from Windows.
+
17
- Locating the Controls and Connectors
Local Area Network (LAN)
(Available using optional port replicator or with external monitor/LAN adapter cable only.) The LAN (RJ-45) jack is used to connect the internal 10/100 Base-T/Tx Ethernet to a Local Area Network (LAN) in your office or home, or broadband devices such as a cable modem, DSL, or satellite Internet.
Wireless LAN/ Bluetooth On-Off Switch
The wireless LAN/Bluetooth switch allows you to turn power to the wireless LAN device and Bluetooth devices on and off.
External Video port
(Available using optional port replicator or with external monitor/LAN adapter cable only.) The external video port allows you to connect an external monitor or LCD projector to your computer.
Volume Control The volume control allows you to increase, decrease, or mute the system
volume.
Connection Notebook
Icon
Purpose
18
- Locating the Controls and Connectors
Figure 2. LifeBook U820 notebook in notebook mode
Display Panel
Status Indicator Panel
Keyboard
Built-in Microphone
Fingerprint Sensor
Web camera
Port Replicator or
External Monitor/
Keyboard Light
Keyboard Light
Pen/Pen Holder
LifeBook Application/ Tablet Buttons
LAN Adapter Cable Connector
Speaker
Cursor Control
Left/right buttons
19
- Locating the Controls and Connectors
Top Components (notebook mode)
The following is a brief description of your LifeBook notebook’s top components when it is in notebook mode. (See Figure 2 on page 18 for location)
Web Camera
The 1.3 megapixel web camera allows you to take pictures of yourself to send over the internet.
Built-in Microphone
The built-in microphone allows you to input audio.
Pen/Pen Holder
The pen is used as the interface with the display.
Display Panel
The display panel is a color LCD panel with backlighting for the display of text and graphics and passive digitizer functionality.
LifeBook Application/Tablet Buttons
The LifeBook Application/Tablet buttons provide one-touch application launch capability as well as tablet­specific functions. See “LifeBook Application/Tablet PC Buttons” on page 47.
Fingerprint Sensor
The fingerprint sensor device allows you to log onto your system as well as password-protected websites and applications by swiping your finger over the sensor. See “Introducing the Fingerprint Sensor Device” on page 153.
Keyboard Lights
The two keyboard lights allow you to illuminate the keyboard under low-light conditions.
Keyboard
A keyboard with dedicated Windows keys. See “Keyboard” on page 38.
20
- Locating the Controls and Connectors
Status Indicator Panels
The Status Indicator Panels display symbols that correspond with a specific component of your LifeBook notebook. The indicators above the keyboard relate to the keyboard states, while the indicator panel below the keyboard relates to power and hard drive access. See “Status Indicator Panel” on page 29
Port Replicator or External Monitor/LAN Adapter Cable Connector
This connector allows you to connect the optional Port Replicator or the adapter cable to your notebook.
Top Components (tablet mode)
The following is a brief description of your LifeBook notebook’s top components when it is in tablet mode. (See Figure 3 on page 21 for location)
Fingerprint Sensor
The fingerprint sensor device allows you to log onto your system as well as password-protected websites and applications by swiping your finger over the sensor. See “Introducing the Fingerprint Sensor Device” on page 153
Ctrl-Alt-Del Button
Holding the button down for approximately two seconds causes it to act as if Ctl-Alt-Del had actually been entered from a keyboard.
Left Button
This button acts the same as the left button on a mouse.
Right Button
This button acts the same as the right button on a mouse.
21
- Locating the Controls and Connectors
Figure 3. LifeBook U820 notebook in tablet mode
Fingerprint
Sensor
Ctrl-Alt-Del
Button
Left Button
Right Button
Button 1
Button 2
Function (Fn) Button
Cursor Control
Down/Page Down
Up/Page Up
Rotation Button
Pen/Pen Holder
22
- Locating the Controls and Connectors
Rotation Button
When you press the Rotation button, the system screen orientation changes from portrait (vertical) to landscape (horizontal) or from landscape to portrait. When you would like to use the Tablet PC as an eBook, for example, you would use the portrait orientation, when accessing spreadsheets, you would more typically use a landscape orientation.
Application Buttons 1 and 2
The Application Buttons can be used to automatically open pre-selected applications. (One of the buttons is pre-programmed to turn on the keyboard lights.) These buttons can also be used with the [Fn] button to perform additional tasks. See “LifeBook Application/Tablet PC Buttons” on page 47 for more information about using the Application Buttons.
Down and Up Buttons
The Down and Up Buttons can be used to navigate through multiple pages. They can also be used to automatically open pre-selected applications. When used with the [Fn] button, they can be used to Page Down and Page Up. See “LifeBook Application/Tablet PC Buttons” on page 47 for more information about using these buttons.
Function Button
The Function Button is used in conjunction with the other Application and Tablet Buttons to perform specified tasks such as opening applications or utilities. When pressed twice in succession, the [Fn] button will open the Fujitsu menu.
Cursor Control
The cursor control is used to move the cursor around the screen.
23
- Locating the Controls and Connectors
Figure 4. LifeBook notebook left-side panel
Left-Side Panel Components
The following is a brief description of your LifeBook notebook’s left-side components.
Microphone Jack
The microphone jack lets you connect an external mono microphone. See “Microphone Jack” on page 78.
Headphone Jack
The headphone jack allows you to connect headphones. See “External Video Port” on page 78.
USB 2.0 Port
The USB 2.0 port allows you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to 480 Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 12 Mbps. See “Universal Serial Bus Ports” on page 76
SD Card Slot
Volume C o n t r o l
Microphone Jack
Headphone Jack
USB 2.0 Port
Anti-Theft Lock Slot
24
- Locating the Controls and Connectors
Secure Digital (SD) Card Slot
The Secure Digital (SD) card slot allows you to install an SD card for data storage. This architecture allows you to transfer data from a variety of different digital devices. See “Inserting an SD Card” on page 73.
Anti-theft Lock Slot
The anti-theft lock slot allows you to attach an optional physical lock down device.
Volum e Cont ro l
The volume control allows you to increase, decrease, or mute the system volume. See “Controlling the Volume” on page 46.
25
- Locating the Controls and Connectors
Figure 5. LifeBook notebook right-side panel
Right-Side Panel Components
The following is a brief description of your LifeBook notebook’s right-side components.
Wireless LAN/Bluetooth Switch
The wireless LAN/Bluetooth switch is used to turn the WLAN and Bluetooth devices on and off. Switching the device off when not in use will help to extend battery life. See “Activating the WLAN Device” on page 144
Compact Flash (CF) Card Slot
Allows you to insert a Compact Flash card. See “Compact Flash (CF) Cards” on page 74
Power/Suspend/Resume Button
The Power/Suspend/Resume button allows you to suspend notebook activity without powering off, resume your LifeBook notebook from sleep mode, and power on your notebook when it has been shut down from Windows.
See “Power/Suspend/Resume Button” on page 62
Power/Suspend/
Compact Flash Card Slot
DC Power Jack
Wireless LAN/
Bluetooth Switch
Resume Button
26
- Locating the Controls and Connectors
DC Power Jack
The DC power jack allows you to plug in the AC adapter to power your LifeBook notebook and charge the internal Lithium ion battery.
27
- Locating the Controls and Connectors
Figure 6. LifeBook notebook bottom panel
Bottom Components
The following is a brief description of your LifeBook notebook’s bottom panel components.
Lithium ion Battery
The battery bay contains the internal Lithium ion battery. It can be unlatched to remove for the battery when stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery.
See “Lithium ion Battery” on page 67
Lithium ion Battery
Battery Latches
Air Vents
Air Vents
28
- Locating the Controls and Connectors
Battery Latches
The battery latches are used to secure the Lithium ion battery in the battery bay.
Air Vents
The air vents allow air to circulate through the system to cool down the components.
TO PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE, BE SURE TO
KEEP ALL AIR ALL VENTS UNOBSTRUCTED, CLEAN, AND CLEAR OF DEBRIS. THIS MAY REQUIRE PERIODIC CLEANING, DEPENDING UPON THE ENVIRONMENT IN WHICH THE SYSTEM IS USED.
D
O NOT OPERATE THE NOTEBOOK IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED, SUCH AS IN
TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION.
29
- Status Indicator Panel
Figure 7. Status Indicator Panel
Status Indicator Panel
The Status Indicators display symbols that correspond to specific components of your Fujitsu LifeBook notebook. The LEDs below each symbol tell you how each of those components is operating. The Status Indicators are located in two different areas (Figure 7). Keyboard-related indicators are above the keyboard on the right, and the remaining indicators are below the keyboard on the right. Note that when the system is in tablet mode, it is not possible to see the keyboard-related indicators; this is fine, since the keyboard is not accessible when the system is in tablet mode.
Hard Drive
NumLk
CapsLk
ScrLk
Battery Level
Power
Charge/ DC In
Access
30
- Status Indicator Panel
Battery Charge/DC-In Indicator
Orange, solid: AC adapter and battery are available and system is being charged.
Blue, solid: AC adapter and battery are available and system is fully charged, or AC adapter is
plugged in but battery is not installed.
Orange, blinking: AC adapter and battery are available and waiting to charge battery (battery is
out of thermal range).
Off: AC adapter is not plugged in.
Battery Level Indicator
The Battery Level indicators display the charge level of the indicated battery pack, as follows:
Blue, solid: Battery is between 51% and 100% charged.
Orange, solid: Battery is between 13% and 50% charged.
Red, solid: Battery is 12% or less charged.
Orange, blinking: Blinks during battery status measurement (Four seconds after the battery is
installed).
Red, blinking: There is a problem with the battery.
Off: There is no battery installed or the battery has no charge.
If the battery pack is installed and the AC adapter is connected while the power is turned off, the
battery level indicator will display the charge level for five seconds after it blinks orange.
If the AC adapter is not connected or the battery pack is not fully charged when the computer is
switched to sleep mode, the indicator will blink. The LED blinks at the rate of one second on/six seconds off.
31
- Status Indicator Panel
Hard Drive Access Indicator
The Hard Drive Access indicator glows green when your internal hard drive is being accessed. Note that flickering is normal.
Power Indicator
The Power indicator glows blue when your system is turned on.
NumLk Indicator
The NumLk indicator states that an optional external keypad is set in numeric keypad mode.
CapsLock Indicator
The CapsLock indicator states that your keyboard is set to type in all capital letters.
ScrLk Indicator
The ScrLk indicator states that your scroll lock is active.
Batteries subjected to shocks, vibration or extreme temperatures can be permanently
damaged.
A shorted battery is damaged and must be replaced.
32
- Display Panel
Figure 8. Opening the Display Panel
Display Panel
Your LifeBook U820 notebook contains an LCD display panel that is backlit for easier viewing in bright environments. The convertible design of your notebook allows you to open the display fully, rotate it in a clockwise direction 180 degrees, and lay it face up on the keyboard. This allows you to use the system as a tablet, much as you would a pad of paper.
Opening the Display Panel
Lift the display backwards, being careful not to touch the screen with your fingers, until it is at a comfortable viewing angle. (See Figure 8)
Display Cover
33
- Display Panel
Using the System as a Tablet
If you would like to use the system as a tablet, perform the following steps.
1 Lift the display until it is perpendicular to the keyboard. (Figure 9). 2 When the display is perpendicular, rotate it 180
o
in clockwise direction (Figure 10) so that it is facing backwards.
3 Holding the top edge of the display panel, pull it forward until it is lying flush against the system. You can now
use your system as a tablet. (
Figure 11)
To return the system to notebook mode, raise the display until it is perpendicular, then rotate it counter-clockwise.
When putting the system into tablet mode, the display must be rotated in a clockwise direction
only. Be sure to turn it counter-clockwise when returning the system to notebook mode (i.e., the reverse of how you turned it when you opened it.) Turning the display in the incorrect direction could cause hinge damage.
When lifting the display, be sure to hold the panel at the top center edge.
In the following step, be sure to position the display perpendicular to the keyboard, otherwise
the keyboard or display cover could get scratched.
Figure 9. Fully Open Display
Figure 10. Rotating Display
Figure 11. Tablet Mode
34
- Display Panel
Adjusting Display Panel Brightness
Once you have turned on your notebook, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are three ways to adjust the brightness: keyboard, power management utility, and Fujitsu Menu.
Using Keyboard to Adjust Brightness
Adjusting the brightness using the keyboard changes the system setting (i.e., the settings you make via the function keys automatically changes the brightness settings in the system’s Tablet and Pen Settings).
[Fn]+[+ / =]: Pressing repeatedly will lower the brightness of your display.
[Fn]+[" / ']: Pressing repeatedly will increase the brightness of the display.
Using Control Panel to Adjust Brightness
To adjust brightness with the Control Panel: Windows XP: Click Start -> Control Panel. If you are not in Classic View, select it in the left panel.
Double-click the Tablet and Pen Settings icon, then select the Display tab. Set the screen brightness slider for When plugged in and Powered by batteries scenarios.
Windows Vista: Click Start -> Control Panel. If you are not in Classic View, select it in the left panel. Double-click the Windows Mobility Center icon, then double-click the icon adjacent to Display brightness. Set the screen brightness sliders for On battery and Plugged in scenarios.
Using the Fujitsu Menu to Adjust Brightness
Windows XP: To adjust brightness using the Fujitsu menu, click on the Fujitsu Menu icon in the system tray in the lower right corner of the screen or press the [Fn] button twice. From the menu that appears, select Brightness Control. The Tablet and Pen Settings window will open. Select the Display tab and set the screen brightness slider for battery and AC power scenarios.
Windows Vista: To adjust brightness using the Fujitsu menu, click on the Fujitsu Menu icon in the system tray in the lower right corner of the screen or press the [Fn] button twice. Click Windows Mobility Center, then click the icon adjacent to Display brightness. Set the screen brightness sliders for On battery and Plugged in scenarios.
35
- Display Panel
Changing Touch Settings
(Windows Vista only) Touch settings can be optimized to increase the size of certain items in the Windows user interface such as Start menu items, scroll bars, title bars and taskbars, icons and buttons. These settings apply only to Windows Vista. In order to optimize the settings, follow the steps below;
1 Launch Touch Settings: Click [Start] --> All Programs --> Microsoft Origami Experience Pack --> Touch
Settings.
2 Select Optimize touch settings and click the [OK] button. 3 Touch settings will be optimized after logging off and logging in again.
Using the Fujitsu Zoom Utility
Your computer has a handy Fujitsu Zoom utility that lets you magnify portions of the screen or all of the screen.
The Fujitsu Zoom utility has a magnifying glass icon in the Windows notification area of the Windows taskbar. You can zoom in (magnify) or zoom out (1280 x 800 resolution) by double-clicking on the icon and selecting the desired action, then using the Window key + “a” (default). You may select another key combination from the dropdown list in ‘Keyboard shortcut’. Button II is also assigned to zoom in/out with each press.
IF USING AC POWER, YOUR BRIGHTNESS SETTING IS SET TO ITS HIGHEST LEVEL BY DEFAULT. IF USING
BATTERY POWER, YOUR BRIGHTNESS SETTINGS IS SET TO APPROXIMATELY MID-LEVEL BY DEFAULT.
T
HE HIGHER THE BRIGHTNESS LEVEL, THE MORE POWER THE TABLET PC WILL CONSUME AND THE FASTER YOUR BATTERIES WILL DISCHARGE. FOR MAXIMUM BATTERY LIFE, MAKE SURE THAT THE BRIGHTNESS IS SET AS LOW AS POSSIBLE.
36
- Handling the System
Handling the System
Your LifeBook U820 notebook is designed to be handheld, used on a secure surface, or docked in the optional tablet dock. When holding the notebook, use the following methods for optimal results.
DO NOT USE THE NOTEBOOK ON YOUR LAP. USING IT ON YOUR LAP WILL BLOCK THE AIR VENTS, WHICH
COULD RESULT IN DAMAGE TO THE SYSTEM AND ALSO CAN REDUCE THE RF EXPOSURE SAFETY DISTANCE DURING RADIO OPERATION.
Using in Notebook Configuration
To use your LifeBook in notebook configuration, place it on a flat, secure surface or hold it as shown in Figure 12. Note that when holding the system, most of the keying will be done with the thumbs, since the fingers are used to hold the device.
If you hold the system with one hand, grasp it securely to prevent it from slipping.
Figure 12. Notebook Orientation
Figure 13. Tablet Configuration (landscape mode)
Using in Tablet Configuration
Landscape Mode: To use your LifeBook in tablet configuration in landscape (horizontal) mode, first convert it as directed in “Using the System as a Tablet” on page 33. Hold the system as shown in Figure13, or place it on a flat, secure surface.
37
- Handling the System
Portrait Mode: To use your LifeBook in tablet configuration in portrait (vertical) mode, first convert it as directed in “Using the System as a Tablet” on page 33. Hold the system as shown in Figure 13, or place it on a flat, secure surface.
Depending upon the configuration and orientation of your system, you may need to rotate the image display. To do so, press the Rotation button repeatedly until the orientation is correct. See “Screen Rotation / Display Switching Button” on page 49.
Figure 14. Tablet Orientation (portrait mode)
38
- Keyboard
Keyboard
Figure 15. Keyboard
Using the Keyboard
Your Fujitsu LifeBook notebook has an integral 68-key keyboard. The keys perform all the standard functions of a 101-key keyboard, including the special function keys. This section describes the special keys: Your keyboard also has “headlights” that help you to see it under darker conditions.
Start Key
Your LifeBook notebook Start key displays the Start menu. This button functions the same as your onscreen Start menu button. (Please refer to your Windows documentation for additional information regarding the Windows keys.)
Fn Key
Start Key
Function Keys
Cursor Keys
CpsLck
Bright (down) Bright (up)External Display.
Alt Key
Numeric Keys
39
- Keyboard
Cursor Keys
The cursor keys are the four arrow keys on the keyboard which are used in conjunction with the [Fn} key to allow you to move the cursor up, down, left and right in applications. In programs such as Windows Explorer, it moves the “focus” (selects the next item up, down, left, or right).
Function Keys
Your LifeBook notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software documentation to find out how these keys are used. Due to the ultra-mobile design of the system and keyboard, some of the functions that are normally assigned to function keys have been reassigned to other keys, as noted below:
The [Fn] key provides extended functions for the notebook and is always used in conjunction with
another key.
Pressing repeatedly will lower the brightness of your display.
Pressing repeatedly will increase the brightness of the display.
Pressing the key while holding allows you to change your selection of
where to send your display video. Each time you press the combination of keys you will step to the next choice. The choices, in order, are: built-in display panel only, external monitor only, and both built-in display panel and external monitor.
Keyboard Lights
Your keyboard has a pair of lights which help you to se the keyboard under darker conditions. The lights are located just behind the keyboard. To turn the lights on and off, please refer to “Button 1: Keyboard Lights / Application A” on page 48.
+
+
+
40
- Using the Cursor Buttons
Using the Cursor Buttons
Figure 16. Cursor Buttons (shown in Tablet mode)
The button array across the top of your LifeBook notebook is used to control the movement of the cursor and to select items on your display panel. The buttons consist of a cursor control at the top right, left and right buttons on the top left, and scroll buttons adjacent to the cursor control.
The cursor control works the same way a mouse does by moving the cursor around the display. It only requires light pressure with the tip of your finger, and the more pressure you use, the faster the cursor will move. Note that the cursor control can be used in the same manner as the left button; first use it to position the cursor, then tap on it to activate your selection.
The left button functions the same as a left mouse button while the right button has the same function as a right mouse button. The scroll buttons allow you to scroll up and down a screen. The actual functionality of the buttons may vary depending on the application that is being used and how they are assigned in the Tablet PC Settings utility in the Control Panel.
Left Button
Right Button
Scroll Button (down)
Cursor Control
Scroll Button (up)
41
- Using the Cursor Buttons
Clicking
Clicking means pushing and releasing a button. To left-click, move the cursor to the item you wish to select, press the Left button once, and then immediately release it. You can also left-click by moving the cursor to the item you wish to select, then tapping the cursor control once. To right­click, move the cursor to the item you wish to select, press the Right button once, and then immediately release it.
Figure 17. Clicking
Double-Clicking
Double-clicking means quickly pushing and releasing the left button twice. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, then press and release the left button twice. You can also double-click by moving the cursor to the item you wish to select, then double­tapping the cursor control.
Figure 18. Double-clicking
IF THE INTERVAL BETWEEN CLICKS IS TOO LONG, THE DOUBLE-CLICK WILL NOT BE EXECUTED.
PARAMETERS FOR THE BUTTONS CAN BE ADJUSTED FROM THE MOUSE DIALOG BOX LOCATED IN THE
W
INDOWS CONTROL PANEL.
42
- Using the Cursor Buttons
Button Control Adjustment
Going to Control Panel > Mouse allows you to customize your cursor buttons with selections made via the Mouse Properties dialog box. There are four aspects of button operation that you can adjust:
Buttons: This tab lets you set up the buttons for right or left handed operation, in addition to setting
up the time interval allowed between clicks in double-clicking.
Pointers: This tab lets you set up the scheme for the cursor depending on its functionality.
Pointer Options: This tab lets you set up a relation between the speed of your finger motion and
the speed of the cursor. It also allows you to enable a Pointer Trail for the cursor arrow.
Stick: This tab allows you to change the cursor control speed and functionality.
Dragging
Dragging means pressing and holding the left button, while moving the cursor control. To drag, move the cursor to the item you wish to move. Press and hold the left button while moving the item to its new location and then release it.
Figure 19. Dragging
Scrolling
Use the Scrolling buttons to navigate through a document quickly without using the window scroll bars. This is particularly useful when you are navigating through on-line pages. To scroll, press and hold the scroll up or scroll down button, depending upon which direction you want to scroll.
Figure 20. Scrolling
Scroll down
Scroll up
43
- Using the Touch Screen
Using the Touch Screen
The integrated Touch Screen allows you to use the included stylus as a pointing device. You can use the stylus to click, double-click, drag items and icons, or to draw like a pen or pencil in applications that support this behavior, such as drawing or painting programs. See the documentation that came with your application for details.
Figure 21. Using the touch screen
DO NOT USE EXCESSIVE FORCE WHEN TAPPING OR WRITING ON THE SCREEN WITH THE STYLUS.
E
XCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LCD AND/OR TOUCH SCREEN.
USE ONLY THE STYLUS FOR TOUCHING THE SCREEN. USING A BALLPOINT PEN OR FINGER COULD
SCRATCH THE SCREEN.
TO PURCHASE ADDITIONAL OR REPLACEMENT STYLUSES, VISIT FUJITSUS ACCESSORIES WEBSITE
AT: WWW.SHOPFUJITSU.COM.
44
- Using the Touch Screen
Clicking on Touch Screen
To left-click, touch the object you wish to select and then lift the stylus tip immediately.
Right-Clicking on Touch Screen
Windows Vista
Right-click can be accomplished by holding the pen down until a circular icon appears. To change the settings for the right-click feature, go to Start >
Control Panel > Pen and Input Devices. In the Pen Options tab, select Press and Hold then click the
[Settings] button.
Figure 22. Clicking on the touch screen
Windows XP Tablet PC Edition:
Right-click can be accomplished by holding the pen down until a circular icon appears. To change the settings for the right-click feature, go to Start > Control Panel > Tablet and Pen Settings. In the Pen Options tab, select Press and Hold then click the [Settings] button.
Double-Clicking
To double-click, touch the item twice, and then immediately remove the stylus tip.
Figure 23. Double-clicking on the touch screen
45
- Using the Touch Screen
Calibrating the Touch Screen
In order to ensure accurate tracking between the stylus and cursor, you must run the Tablet Calibration utility before you use the Touch Screen for the first time, or after you change the display resolution.
To run the calibration utility:
1 Go to Start -> Control Panel. If you are not in Classic View, select Switch to Classic View in the left panel. 2 Double-click the Tablet Calibration icon. 3 Adjust the display of your notebook to a comfortable angle.
4 Touch the stylus to various points on the screen to verify that the screen is correctly calibrated.
Dragging
Dragging means moving an item with the stylus by touching the screen, moving and then lifting the stylus. To drag, touch the Touch Screen with your stylus on the item you wish to move. While continuing to touch the screen with the stylus, drag the item to its new location by moving the stylus across the screen, and then lifting the stylus to release it. Dragging can also be done using your fingertip.
Figure 24. Dragging on the touch screen
DO NOT USE EXCESSIVE FORCE WHEN TAPPING ON THE SCREEN DURING CALIBRATION. USE OF
EXCESSIVE FORCE COULD RESULT IN DAMAGE TO THE LCD AND/OR TOUCH PANEL.
W
HEN USING THE STYLUS TO CALIBRATE THE SCREEN, BE SURE TO AVOID TOUCHING THE SCREEN
WITH YOUR FINGERS; DOING SO COULD RESULT IN FAULTY CALIBRATION.
46
- Volume Control
Volume Control
Your Fujitsu LifeBook notebook has multiple volume controls which interact with each other.
Controlling the Volume
The volume can be controlled in several different ways:
Certain external audio devices you connect to your system may have hardware volume controls.
Each source discussed above puts an upper limit on the volume level that must then be followed by the other sources. We recommend that you experiment with the various volume controls to discover the optimal sound level.
ANY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN. IF
YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL, THE HARDWARE VOLUME CONTROL AND THE SOFTWARE VOLUME CONTROL WILL INTERACT WITH EACH OTHER. IT SHOULD BE NOTED THAT IF YOU SET YOUR SOFTWARE VOLUME TO OFF, YOU WILL OVERRIDE THE EXTERNAL VOLUME CONTROL SETTING.
Volume can be controlled using the
volume control on the left side of the system (Figure 25). To change the volume, simply push the control to the left or right. You can also mute the sound by pressing the control towards the system.
Volume can be changed or muted from
within the Volume Control in the system tray.
Volume can be controlled by many
volume controls that are set within individual applications.
Figure 25. Volume Control
Volume c ontr o l
47
- LifeBook Application/Tablet PC Buttons
Figure 26. LifeBook U820 Notebook Application/Tablet PC Buttons
LifeBook Application/Tablet PC Buttons
A unique feature of your LifeBook U820 notebook is the array of Application and Tablet PC buttons. These buttons allow you to launch specific applications and functions with the touch of a button.
Button functions
All seven buttons can be used after logging on to Windows. Four of the buttons have secondary functions. See Table 1 for information about each of the post-logon functions.
Rotation
Button 2
Button 1
Down Up
Function
Ctl-Alt-Del Button
NOTE THAT IT IS NOT NECESSARY TO PRESS THE [FN] BUTTON SIMULTANEOUSLY WITH THE
APPLICATION/TABLET BUTTON; ONCE YOU PRESS AND RELEASE THE [FN] BUTTON, IT WILL REMAIN ACTIVE UNTIL YOU HAVE PRESSED THE DESIRED APPLICATION/TABLET BUTTON.
48
- LifeBook Application/Tablet PC Buttons
Button 1: Keyboard Lights / Application A
When you press Button 1, each press of the button will toggle the keyboard lights on and off. When you press the [Fn] button then press and release Button 1, you will automatically start whichever
program is assigned to the button. The default application for this button is the Power Saving Utility. See “Changing Tablet PC Button Functions” on page 50 to select a different application for this button.
Table 1. Post-logon Tablet PC Button Functions
Button
Name/Icon
Primary Notebook Function Secondary Functions (Fn + Button)
Button 1
Keyboard Lights On/Off Default = Power Saving Utility, or,
User-defined Application A (
Button 2
On-Screen Keyboard Default = Windows Journal, or,
User-Defined Application B
Page Down
Down Page Down
Page Up
Up Page Up
Rotation
Screen Rotation
Display Switching: 1. LED only, 2. CRT only, 3. Dual Display
Function
Secondary Function Selection Fujitsu Menu Utility
Ctl-Alt-Del
Ctl+Alt+Del Button None
49
- LifeBook Application/Tablet PC Buttons
Button 2: On Screen Keyboard / Application B
When you press Button 2, each press of the button will toggle the on-screen keyboard on and off. When you press the [Fn] button then press and release Button 2, you will automatically start whichever program is assigned to the button. The default application for this button is Microsoft Journal. See “Changing Tablet PC Button Functions” on page 50 to select a different application for this button.
Down / Page Down Button
When you press the Down button, you will scroll down a page for quicker navigation. When you press the [Fn] button then press and release the Down button, you will jump to the next page. This allows you to navigate quickly through large documents. See “Changing Tablet PC Button Functions” on page 50 to select a different function for this button.
Up / Page Up Button
When you press the Up button, you will scroll up a page for quicker navigation. When you press the [Fn] button then press and release the Up button, you will jump to the previous page. This allows you to navigate quickly through large documents. See “Changing Tablet PC Button Functions” on page 50 to select a different function for this button.
Screen Rotation / Display Switching Button
The screen rotation feature would normally be used only when the system is configured as a tablet. When you would like to use the tablet as an eBook, for example, you would use the portrait orientation; when accessing spreadsheets or using the system as a notebook, you would more typically use landscape orientation.
When the system is changed to tablet configuration, the orientation automatically changes to portrait mode by default.
THE SCREEN ORIENTATION DEFAULT CAN BE CHANGED BY GOING TO THE CONTROL PANEL (IN CLASSIC V
IEW) AND DOUBLE-CLICKING ON TABLET AND PEN SETTINGS (IN WINDOWS XP) OR TABLET PC
S
ETTINGS (WINDOWS VISTA) AND SELECTING THE DESIRED SETTINGS IN THE DISPLAY PROPER TIES.
A
FTER CHANGING THE SETTINGS, SAVE THEM IN FUJITSU TABLET CONTROLS.
50
- LifeBook Application/Tablet PC Buttons
When you press the [Screen Rotation / Display Switching] button, the system screen orientation changes from portrait (vertical) to landscape (horizontal) or from landscape to portrait.
Pressing the [Fn] button while pressing the [Screen Rotation] button will switch the display output in the following order: built-in display only, external display only, dual display.
Function / Fujitsu Menu Utility Button
The [Function] button works in conjunction with the other application buttons to provide additional functionality for the buttons. Refer to specific details above.
Pressing the [Fn] button twice in succession causes the Fujitsu Menu Utility to appear on your screen, allowing you to modify certain system settings.
Ctl+Alt+Del Button
Pressing and holding the [Ctl-Alt-Del] button for up to 750 milliseconds launches the Logon screen or the Windows Task Manager.
Changing Tablet PC Button Functions
Button 1 and Button 2 can be changed to launch a program or perform an action you select. By default, Button 1 launches the Power Saving Utility, and Button 2 launches MS Journal.
To launch different applications or cause the buttons to perform a specific action:
Windows XP:
1 Double-click on the Tablet and Pen Settings icon in the Control Panel. 2 Select the Tablet Buttons tab and select the button you would like to change from the list. 3 Click [Change] and open the drop down list in the Action: field. 4 Select the action you would like the button to perform. If you want to launch a program, click on Launch an
Application then browse to the location of the program.
5 Click [OK], then click [OK] again. The buttons will now perform the actions you have assigned to them.
51
- LifeBook Application/Tablet PC Buttons
Windows Vista:
1 Double-click on the Tablet PC Settings icon in the Control Panel. 2 Select the Buttons tab and select the button you would like to change from the list. 3 Click [Change] and open the drop down list in the Press: field. 4 Select the action you would like the button to perform. If you want to launch a program, click on Launch an
Application then browse to the location of the program.
5 Click [OK], then click [OK] again. The buttons will now perform the actions you have assigned to them.
Precautions
Opening and Closing the Cover
By default, closing the cover automatically places your system into Sleep mode.
Windows XP systems:
To change the action the system takes when the cover is closed:
1 Open the Power Options Properties icon in the Control Panel, and select the Advanced tab. 2 Make a choice from the drop down menu for When I close the lid of my portable computer and click [OK]. 3 Normally, opening the cover does not automatically place the notebook into normal operation. Instead, you must
enter the proper security password after pushing the Power/Suspend/Resume button. If you prefer, you can have the system resume automatically (without the password) when you press the power button by unchecking the Prompt for password when computer resumes from standby in the Advanced tab.
Windows Vista systems:
To change the default for Windows Vista systems when the cover is closed:
1 Open the system Control Panel. 2 If the display is in Category view, click Change battery settings under the Mobile PC category. If it is in Classic
view, click Power Options.
3 Click Choose what closing the lid does in the left pane. 4 Select the desired action for When I close the lid, then click the [Save changes] button.
52
Chapter 2
Getting Started with Your LifeBook
Power Sources
Your Fujitsu LifeBook notebook has three possible power sources: a primary Lithium ion battery, an AC adapter or an optional Auto/Airline adapter.
Connecting the Power Adapters
The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the batteries.
Connecting the AC Adapter
1 Plug the DC output cable into the DC power jack of your LifeBook notebook (Figure 27). 2 Plug the AC adapter into an AC electrical outlet.
Connecting the Optional Auto/Airline Adapter
1 Plug the DC output cable into the DC power jack on your notebook. 2 Plug the Auto/Airline adapter into the cigarette lighter of an automobile with the ignition key in the On or
Accessory position, or,
3 Plug the Auto/Airline adapter into the DC power jack on an airplane seat.
53
- Power Sources
Switching from AC Adapter Power or the Auto/Airline Adapter to Battery Power
1 Be sure that you have at least one charged battery installed. 2 Remove the AC adapter or the Auto/Airline adapter.
Figure 27. Connecting the AC Adapter
T
HE LITHIUM ION BATTERY IS NOT CHARGED UPON PURCHASE. INITIALLY, YOU WILL NEED TO CONNECT EITHER THE AC ADAPTER OR THE AUTO/AIRLINE ADAPTER TO USE YOUR NOTEBOOK.
AC Adapter
54
- Starting Your LifeBook Notebook
Starting Your LifeBook Notebook
Power On
Power/Suspend/Resume Button
The Power/Suspend/Resume button allows you to suspend notebook activity without powering off, resume your LifeBook notebook from sleep mode, and power on your notebook when it has been shut down from Windows.
To turn on your LifeBook notebook from its off state, push the Power/Suspend/Resume button (located on the right side of the system) towards the back of the system (See figure 5 on page 25 for location). When you are done working you can either leave your notebook in Suspend mode, See “Sleep Mode” on page 63 or you can turn it off. See “Powering Off” on page 65.
When you power on your LifeBook, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality. If a fault is found, your LifeBook notebook will emit an audio warning and/or an error message will be displayed. See “Power On Self Test Messages” on page 93. Depending on the nature of the problem, you may be able to continue by starting the operating system or by entering the BIOS setup utility and revising the settings.
After satisfactory completion of the POST, your notebook will load your operating system.
WHEN YOU TURN ON YOUR LIFEBOOK NOTEBOOK, BE SURE YOU HAVE A POWER SOURCE. THIS MEANS
THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED, OR THAT THE AC OR AUTO/AIRLINE ADAPTER IS CONNECTED AND HAS POWER.
D
O NOT CARRY YOUR LIFEBOOK NOTEBOOK AROUND WITH THE POWER ON OR SUBJECT IT TO SHOCKS
OR VIBRATION, AS YOU RISK DAMAGING YOUR NOTEBOOK.
55
- Starting Your LifeBook Notebook
Boot Sequence
The procedure for starting-up your notebook is termed the Bootup sequence and involves your notebook’s BIOS. When your LifeBook notebook is first turned on, the main system memory is empty, and it needs to find instructions to start up your notebook. This information is in the BIOS program. Each time you power up or restart your notebook, it goes through a boot sequence which displays a Fujitsu logo until your operating system is loaded. During booting, your notebook is performing a standard boot sequence including a Power On Self Test (POST). When the boot sequence is completed without a failure and without a request for the BIOS Setup Utility, the system displays the operating system’s opening screen.
The boot sequence is executed when:
You turn on the power to your LifeBook notebook.
You restart your notebook from the Windows Shut Down dialog box.
You resume operation from Hibernation mode.
The software initiates a system restart. Example: When you install a new application.
Hard Disk Drive Passwords
To provide additional security for your data, you can assign passwords to your hard disk drive(s). This feature is managed in the system BIOS Setup Utility. See BIOS Setup Utility below for information about accessing the utility.
NEVER TURN OFF YOUR LIFEBOOK NOTEBOOK DURING THE POWER ON SELF TEST (POST) OR IT WILL
CAUSE AN ERROR MESSAGE TO BE DISPLAYED WHEN YOU TURN YOUR LIFEBOOK NOTEBOOK ON THE NEXT TIME. See “Power On Self Test Messages” on page 93.
R
EMEMBER YOUR PASSWORDS. IF YOU SET AND FORGET YOUR USER AND SUPERVISOR HARD DISK
PASSWORDS, FUJITSU COMPUTER SYSTEMS WILL NOT BE ABLE TO RESET IT. YOU MAY LOSE DATA AND HAVE TO REPLACE YOUR SYSTEM BOARD OR HARD DISK DRIVE.
56
- Starting Your LifeBook Notebook
BIOS Setup Utility
The BIOS Setup Utility is a program that sets up the operating environment for your LifeBook notebook. Your BIOS is set at the factory for normal operating conditions, therefore there is no need to set or change the BIOS’ environment to operate your notebook.
The BIOS Setup Utility configures:
Device control feature parameters, such as changing I/O addresses and boot devices.
System Data Security feature parameters, such as passwords.
Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following (or use the TrustedCore Menu, as detailed below):
1 Turn on or restart your LifeBook notebook. 2 To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open
the main menu of the BIOS Setup Utility with the current settings displayed.
3 Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter
the current settings.
Using the TrustedCore Menu
When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the TrustedCore Menu will appear.
The TrustedCore Menu provides shortcuts to the following menus and information screens:
BIOS Setup
Diagnostic Screen
Boot Menu
Patent Information
System Information
Continue Booting
57
- Starting Your LifeBook Notebook
Clicking on any of the fields will invoke the screen, information, or action described. The Boot Menu can also be invoked by pressing the [F12] key when the Fujitsu logo appears on the screen.
BIOS Guide
A guide to your notebook’s BIOS is available online. Please visit our service and support website at http://www.computers.us.fujitsu.com/support, then select User’s Guides under Online Support. Select your Product, Series, and Model, then click [Go]. Under the Manuals tab, select the BIOS Guide.
Booting the System
We strongly recommend that you not attach any external devices until you have gone through the initial power on sequence.
When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin.
Depending upon your operating system (Windows Vista or XP edition), there is a different procedure for starting your system for the first time, as outlined below.
Starting Windows Vista the first time
In order to ensure that you receive the most benefits from the Windows Vista operating system, it should be registered the first time you use it.
THE FIRST TIME YOU INITIALIZE YOUR WINDOWS VISTA SYSTEM, THE SCREEN WILL BE BLANK FOR
APPROXIMATELY TWO MINUTES. THIS IS NORMAL. AFTER INITIALIZATION, A “SET UP WINDOWSDIALOG
BOX WILL APPEAR.
IMPORTANT: DURING THE SETUP PROCEDURE, DO NOT DISCONNECT THE POWER SUPPLY, PRESS ANY
BUTTONS, OR USE ANY PERIPHERAL DEVICES SUCH AS A MOUSE, KEYBOARD, OR REMOTE CONTROL.
THE FIRST TIME YOU INITIALIZE YOUR WINDOWS VISTA SYSTEM, YOU MAY BE ASKED TO SELECT YOUR
LANGUAGE. BE SURE TO SELECT THE CORRECT LANGUAGE THE FIRST TIME, OTHERWISE IT WILL BE
NECESSARY TO RESTORE YOUR SYSTEM USING THE RESTORE MEDIA.
58
- Starting Your LifeBook Notebook
1 First of all, you will need to read and accept the End User License Agreements (EULAs).
2 You will be prompted to enter your User Name and Password and you will be given a chance to select an
icon for your account.
3 The next screen asks for a Computer Name and allows you to choose a desktop background. 4 You will next see a "Help protect Windows automatically" screen in which the default choice is "Use
recommended settings”. The other two choices are "Install important updates only" and "Ask me later". Select from the three choices.
5 On the next screen set your time and date settings. 6 You will next see the "Select your computer's current location" screen. Make your selection from Home, Work
(Default), and Public location.
7 The "Thank you" screen appears, followed by several screens while Windows checks the system performance. 8 Windows will then boot up for the first time. As noted above, the first time you initialize your Windows Vista
system, the screen will be blank for approximately two minutes. This is normal. During this period, do not disconnect the power supply, press any buttons, or use any peripheral devices such as mouse, keyboard, or remote control.
Registering Windows Vista with Microsoft
1 After Windows has booted up for the first time, the Control Panel Welcome Center will appear. If the Register
Windows Online icon is not seen in the window, click on Show all xx items (where “xx” is the number of topics in the Welcome Center).
2 Click on Register Windows Online and follow the instructions that appear to register your copy of Windows.
IF YOU REJECT THE TERMS OF THE LICENSE AGREEMENTS YOU WILL BE ASKED TO REVIEW THE
LICENSE AGREEMENTS FOR INFORMATION ON RETURNING TO WINDOWS OR TO SHUT DOWN YOUR
L
IFEBOOK NOTEBOOK.
YOU CANNOT USE YOUR NOTEBOOK UNTIL YOU HAVE ACCEPTED THE LICENSE AGREEMENTS. IF YOU
STOP THE PROCESS YOUR NOTEBOOK WILL RETURN TO THE BEGINNING OF THE WINDOWS WELCOME
P
ROCESS, EVEN IF YOU SHUT YOUR NOTEBOOK DOWN AND START IT UP AGAIN.
59
- Starting Your LifeBook Notebook
Starting Windows XP the First Time
Registering Windows XP with Microsoft
In order to ensure that you receive the most benefits from the Windows operating system, it should be registered the first time you use it.
After you receive the Windows Welcome screen, you will be prompted to enter registration information in the following order.
First of all, you will need to read and accept the End User License Agreements (EULAs). After accepting the EULAs, you will be asked if you want to enable the Automatic Updates feature. Acceptance of this feature is recommended because it allows your system to be updated automatically whenever an important change becomes available for your notebook.
Several additional windows will appear, prompting you to enter a name and description for your computer, an Administrator password, and a domain name. Read the instructions on the screens carefully and fill in the information as directed.
You will then be automatically connected to the Internet, if you have an appropriate connection available. If an automatic connection is not possible, you will be asked about how you dial out from where you will be using your LifeBook notebook. If you are not connected to a phone line and plan to register at a later time, you may click the [Skip] button.
Once you are connected to the Internet, you will be asked if you wish to continue with the registration. If you select [Yes] you will then enter your name and address, and email address if desired. Click [Next] to complete registration.
IF YOU REJECT THE TERMS OF THE LICENSE AGREEMENT YOU WILL BE ASKED TO REVIEW THE LICENSE
AGREEMENT FOR INFORMATION ON RETURNING WINDOWS OR TO SHUT DOWN YOUR NOTEBOOK.
YOU CANNOT USE YOUR LIFEBOOK NOTEBOOK UNTIL YOU HAVE ACCEPTED THE LICENSE
A
GREEMENT. IF YOU STOP THE PROCESS YOUR NOTEBOOK WILL RETURN TO THE BEGINNING OF THE
W
INDOWS WELCOME PROCESS, EVEN IF YOU SHUT YOUR NOTEBOOK DOWN AND START IT UP AGAIN.
60
- Starting Your LifeBook Notebook
Registering Your LifeBook notebook with Fujitsu
You will need to be set up with an Internet Service Provider (ISP) to register online. You can register your LifeBook by going to our website at: us.fujitsu.com/computers
Installing ClickMe!
Windows Vista Systems
The first time you boot up your system, you will see a “Primary Settings for the PC” window. This window explains the installations which will be performed by the Click Me! utility. If you click [Execute], ClickMe! will begin installing. If after clicking the button you receive a “User Account Control” window, you will be asked for your permission to continue. Click [Continue] to continue. If you cancel the operation, the ClickMe! icon will appear on your desktop for later installation.
Windows XP Systems
The first time you boot up your system, you will see an icon called Click Me! in the Start menu. We highly recommend that you install the ClickMe! utility the first time you boot up. When you click the Click
Me! icon, your system will automatically create the related icons in the system tray in the bottom right of the screen. These icons provide links to utilities that you will frequently access, such as wireless LAN software provided by the wireless LAN manufacturer.
BEFORE INSTALLING THE CLICKME! UTILITY, BE SURE THE WIRELESS LAN SWITCH IS TURNED ON.
I
N ADDITION TO THE UTILITIES AND APPLICATIONS INSTALLED BY CLICKME!, OTHER THIRD-PARTY
APPLICATIONS MAY NEED TO BE INSTALLED FROM THE INCLUDED CDS/DVDS.
ClickMe!
61
- Starting Your LifeBook Notebook
Fujitsu Driver Update Utility
Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. For more information about the FDU utility, refer to “Automatically Downloading Driver Updates” on page 102.
62
- Power Management
Power Management
Your LifeBook notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness. Internal power management for your notebook may be controlled from settings made in your operating system, pre-bundled power management application, or from settings made in BIOS setup utility.
Besides the options available for conserving battery power, there are also some things that you can do to prevent your battery from running down as quickly. For example, you can create an appropriate power saving profile, put your notebook into Sleep mode when it is not performing an operation, and you can limit the use of high power devices. As with all mobile, battery powered computers, there is a trade-off between performance and power savings.
Power/Suspend/Resume Button
When your notebook is active, the Power/Suspend/Resume button can be used to manually put the notebook into Sleep mode. Push the Power/Suspend/Resume button when the notebook is active, but not actively accessing anything, and immediately release the button. Note that if you press the button continuously for four seconds or longer, your notebook will shut down.
If your notebook is suspended, pushing the Power/Suspend/Resume button returns your notebook to active operation. You can tell whether the system is Suspended by looking at the Power indicator. If the indicator is visible and not flashing, your notebook is fully operational. If the indicator is visible and flashing, your notebook is in Sleep mode. If the indicator is not visible, the power is off or your notebook is in Hibernation mode. (See Hibernation Feature)
PLEASE NOTE THAT “STANDBY MODEIN WINDOWS XP IS KNOWN AS “SLEEP MODEIN WINDOWS V
ISTA. THE TWO TERMS ARE INTERCHANGEABLE. FOR PURPOSES OF THIS DOCUMENT, “SLEEP MODE
WILL BE USED.
63
- Power Management
Sleep Mode
Sleep mode in Windows saves the contents of your system memory during periods of inactivity by maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and all other internal components except those necessary to maintain system memory and for restarting.
Your notebook can be put in Sleep mode by:
Pressing the Power/Suspend/Resume button when your system is turned on.
Selecting Sleep (“Standby” in Windows XP) from the Windows Shut Down menu.
Timing out from lack of activity.
Allowing the battery to reach the Dead Battery Warning condition.
System memory typically stores the files on which you are working, open application information, and any other data required to support operations in progress. When you resume operation from Sleep, your system will return to where it left off. You must use the Power/Suspend/Resume button to resume operation, and there must be an adequate power source available, or your notebook will not resume.
IF RUNNING YOUR NOTEBOOK ON BATTERY POWER, BE AWARE THAT THE BATTERY CONTINUES TO DISCHARGE
WHILE YOUR NOTEBOOK IS IN SLEEP MODE, THOUGH NOT AS FAST AS WHEN FULLY OPERATIONAL.
DISABLING THE POWER/SUSPEND/RESUME BUTTON PREVENTS IT FROM BEING USED TO PUT THE NOTEBOOK INTO S
LEEP OR HIBERNATION (SAVE-TO-DISK) MODE. THE BUTTON RESUME FUNCTION CANT BE DISABLED.
THE SLEEP OR HIBERNATION (SAVE-TO-DISK) MODE SHOULD NOT BE USED WITH CERTAIN PC CARDS. CHECK
YOUR PC CARD DOCUMENTATION FOR MORE INFORMATION. WHEN PC CARDS OR EXTER NAL DEVICES ARE IN USE, HIBERNATION (SAVE-TO-DISK) MODE CANNOT RETURN TO THE EXACT STATE PRIOR TO SUSPENSION, BECAUSE ALL OF THE PERIPHERAL DEVICES WILL BE RE-INITIALIZED WHEN THE SYSTEM RESTARTS.
IF YOUR NOTEBOOK IS ACTIVELY ACCESSING INFORMATION WHEN YOU ENTER THE SLEEP OR HIBERNATION MODE,
CHANGES TO OPEN FILES ARE NOT LOST. THE FILES ARE LEFT OPEN AND MEMORY IS KEPT ACTIVE DURING SLEEP MODE OR THE MEMORY IS TRANSFERRED TO THE INTERNAL HARD DRIVE DURING HIBERNATION MODE.
THE MAIN ADVANTAGE OF USING HIBERNATION (SAVE-TO-DISK) IS THAT POWER IS NOT REQUIRED TO MAINTAIN
YOUR DATA. THIS IS PARTICULARLY IMPORTANT IF YOU WILL BE LEAVING YOUR NOTEBOOK IN A SUSPENDED STATE FOR A PROLONGED PERIOD OF TIME. THE DRAWBACK OF USING HIBERNATION MODE IS THAT IT LENGTHENS THE POWER DOWN AND POWER UP SEQUENCES AND RESETS PERIPHERAL DEVICES.
64
- Power Management
Hibernation (Save-to-Disk) Feature
The Hibernation feature saves the contents of your notebook’s system memory to the hard drive as a part of the Power/Suspend/Resume mode. You can enable or disable this feature.
Enable or Disable the Hibernation Feature
Windows XP: The default settings are not enabled. To enable or disable the Hibernation feature follow these steps:
1 From the Start menu, select Settings, and then select Control Panel. 2 From the Control Panel select Power Options. 3 Select the Hibernate tab. Select the box to enable or disable this feature.
Windows Vista: The default settings are not enabled. To enable or disable the Hibernation feature, follow these steps:
1 From the Start menu, select Control Panel > Power Options. 2 Select Choose what the power button does or Choose what closing the lid does, then make your selection
(Do Nothing, Sleep, Hibernate, or Shut Down).
Windows Power Management
The Power Options icon in the Windows Control Panel allows you to configure some of the power management settings. For example, you can use Power Options to set the timeout values for turning off the display and hard disks whether you are running the notebook on battery or one of the adapters.
Restarting the System
If your system is on and you need to restart it, be sure that you use the following procedure.
Windows Vista:
1 Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right-hand
pane.
2 Select Restart from the list.
65
- Power Management
Windows XP:
1 Click the [Start] button, and then click Shut Down... 2 Select the Restart option. Your notebook will shut down and then reboot.
Powering Off
Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn off the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down without error, use the Windows shut down procedure.
Using the correct procedure to shut down from Windows allows your notebook to complete its operations and turn off power in the proper sequence to avoid errors. The proper sequence is:
Windows Vista:
Click the [Start] button, and then move the mouse over the small arrow at the bottom right of the right­hand pane. Select Shut Down from the list.
Windows XP:
Click the [Start] button, click Shut Down..., and then select the Shut Down option. If you are going to store your notebook for a month or more, see Care and Maintenance Section.
TURNING OFF YOUR LIFEBOOK NOTEBOOK WITHOUT EXITING WINDOWS OR TURNING ON YOUR
NOTEBOOK WITHIN 10 SECONDS OF THE NOTEBOOK BEING SHUT OFF MAY CAUSE AN ERROR WHEN YOU START THE NEXT TIME.
B
E SURE TO CLOSE ALL FILES AND EXIT ALL APPLICATIONS PRIOR TO TURNING OFF THE POWER. IF FILES ARE OPEN WHEN YOU TURN THE POWER OFF, YOU WILL LOSE ANY CHANGES THAT HAVE NOT BEEN SAVED, AND MAY CAUSE DISK ERRORS.
66
- Power Management
ENERGY STAR® Compliance
Your Fujitsu system is an ENERGY STAR® qualified mobile PC. By choosing a computer with the latest energy-saving technology, you’re helping to preserve our environment for future generations.
ENERGY STAR is a joint program of the U.S. Environmental Protection Agency, U.S. Department of Energy, Natural Resources Canada, and other governments around the world
helping us save money while protecting the environment through energy efficient products and practices. With energy costs and global warming top-of-mind for consumers, Fujitsu is committed to offering solutions that help consumers conserve energy and improve the quality of our environment.
Sleep Mode:
You will notice that your computer is initially set so that the display turns off after 15 minutes of user inactivity, and the computer goes into Sleep mode after 20 minutes of user inactivity. When going into Sleep mode, the computer also reduces the speed of any active Ethernet network links. To “wake” the computer from Sleep mode, press the Suspend/Resume Button.
Energy saving benefits:
Fujitsu ENERGY STAR qualified mobile PCs use about half as much electricity as standard equipment – saving half in utility costs. But more than that, ENERGY STAR also makes a difference for the environment. Did you know that the average house can be responsible for twice the greenhouse gas emissions as the average car? That’s because every time you flip on a light switch, run your dishwasher, or turn on your PC, you use energy, which means more greenhouse gas emissions from power plants. So the more energy we can save through energy efficiency, the more we help to reduce greenhouse gases and the risks of global warming.
To learn more about the important ENERGY STAR program, visit: www.energystar.gov. To read about how Fujitsu is supporting Sustainable Management along with several other environmental
activities, visit the Fujitsu Corporate Citizenship page at:
http://www.computers.us.fujitsu.com/www/content/aboutus/environmental/environment.php
67
Chapter 3
User-Installable Features
Lithium ion Battery
Your LifeBook notebook has a Lithium ion battery that provides power for operating your notebook when no external power source is available. The battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals or other hazards.
The Lithium ion battery operating time may become shorter if it is used under the following conditions:
When used at temperatures that exceed a low of 5°C or a high of 35°C. Extreme temperatures not
only reduce charging efficiency, but can also cause battery deterioration. The Charging icon on the Status Indicator panel will flash when you try to charge a battery that is outside its operating temperature range.
When using a high current device such as an external optical drive or the hard drive, using the AC
adapter will conserve your battery life.
DO NOT LEAVE A FAULTY BATTERY IN YOUR NOTEBOOK. IT MAY DAMAGE YOUR AC ADAPTER, OPTIONAL A
UTO/AIRLINE ADAPTER, ANOTHER BATTERY OR YOUR NOTEBOOK ITSELF. IT MAY ALSO PREVENT
OPERATION OF YOUR NOTEBOOK BY DRAINING ALL AVAILABLE CURRENT INTO THE BAD BATTERY.
68
- Lithium ion Battery
Recharging the Batteries
If you want to know the condition of the Lithium ion battery, check the Battery Level indicator located on the Status Indicator panel. The indicator changes as the battery level changes.
The Lithium ion battery is recharged internally using the AC adapter or Auto/Airline adapter. To recharge the battery make sure the battery that needs to be charged is installed in your LifeBook notebook and connect the AC or Auto/Airline adapter.
There is no memory effect on the Lithium ion battery, therefore you do not need to discharge the battery completely before recharging. The charge times will be significantly longer if your notebook is in use while the battery is charging. If you want to charge the battery more quickly, put your notebook into Sleep mode, or turn it off while the adapter is charging the battery. (See Power Management on page 62 for more
information on Sleep mode and shutdown procedure)
BATTERY LIFE WILL VAR Y BASED ON SCREEN BRIGHTNESS, APPLICATIONS, FEATURES, POWER
MANAGEMENT SETTINGS, BATTERY CONDITION AND OTHER CUSTOMER PREFERENCES. OPTICAL DRIVE OR HARD DRIVE USAGE MAY ALSO HAVE A SIGNIFICANT IMPACT ON BATTERY LIFE. THE BATTERY CHARGING CAPACITY IS REDUCED AS THE BATTERY AGES. IF YOUR BATTERY IS RUNNING LOW QUICKLY, YOU SHOULD REPLACE IT WITH A NEW ONE.
UNDER FEDERAL, STATE, OR LOCAL LAW IT MAY BE ILLEGAL TO DISPOSE OF BATTERIES BY PUTTING
THEM IN THE TRASH. PLEASE TAKE CARE OF OUR ENVIRONMENT AND DISPOSE OF BATTERIES PROPERLY. CHECK WITH YOUR LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING OR DISPOSING OF OLD BATTERIES. IF YOU CANNOT FIND THIS INFORMATION ELSEWHERE, CONTACT YOUR SUPPORT REPRESENTATIVE AT 1-800-8FUJITSU (1-800-838-5487)
M
AKE SURE THAT THE PERCENTAGE CHARGE IS INDICATED BY THE BATTERY CHARGING INDICATOR ON
THE STATUS INDICATOR PANEL.
69
- Lithium ion Battery
Low Battery State
When the battery is running low, a low battery notification message will appear. If you do not respond to the low battery message, the batteries will continue to discharge until they are too low to operate. When this happens, your notebook will go into Sleep mode. There is no guarantee that your data will be saved once the notebook reaches this point.
Dead Battery Suspend mode shows on the Status indicator just like the normal Sleep mode. Once your notebook goes into Dead Battery Suspend mode you will be unable to resume operation until you provide a source of power either from an adapter, or a charged battery. Once you have provided power, you will need to press the Power/Suspend/Resume button to resume operation.
In Dead Battery Suspend mode, your data can be maintained for some time, but if a power source is not provided promptly, the Power indicator will stop flashing and go out, meaning you have lost the data that was not stored. Once you provide power, you can continue to use your notebook while an adapter is charging the battery.
USING HEAVY CURRENT DEVICES OR FREQUENT EXTERNAL OPTICAL DRIVE ACCESSES MAY PREVENT
CHARGING COMPLETELY.
ONCE THE LOW BATTERY NOTIFICATION MESSAGE APPEARS, YOU NEED TO SAVE ALL YOUR ACTIVE DATA AND PUT
YOUR LIFEBOOK NOTEBOOK INTO SLEEP MODE UNTIL YOU CAN PROVIDE A NEW POWER SOURCE. YOU SHOULD PROVIDE A CHARGED BATTERY, AN AC POWER ADAPTER, OR AUTO/AIRLINE ADAPTER AS SOON AS POSSIBLE.
WHEN YOU ARE IN SLEEP MODE THERE MUST ALWAYS BE AT LEAST ONE POWER SOURCE ACTIVE. IF YOU
REMOVE ALL POWER SOURCES WHILE YOUR LIFEBOOK NOTEBOOK IS IN SLEEP MODE, ANY DATA THAT HAS NOT BEEN SAVED TO THE HARD DRIVE WILL BE LOST.
70
- Lithium ion Battery
Shorted Batteries
The Status Indicator panel indicator associated with the Battery Level indicator displays the operating level available in that battery. If this display shows a flashing red LED, it means the battery is damaged and must be replaced so it does not damage other parts of your LifeBook notebook.
Replacing the Battery
With the purchase of an additional battery, you can have a fully charged spare to swap with one that is not charged. There are two ways to swap batteries, cold-swapping and hot-swapping:
Cold-swapping Batteries
To cold-swap batteries in your battery bay follow these easy steps (Figure 28):
1 Have a charged battery ready to install. 2 Shut down your notebook and disconnect the AC adapter. 3 While pushing the battery bay release latches as shown, slide the battery out of the bay. 4 Insert a new battery into the bay, and press it in firmly so that the latch clicks into place. 5 Plug in the AC adapter and turn the power on.
Hot-swapping Batteries
To hot-swap batteries in your battery bay follow these easy steps:
1 Plug an AC Adapter into the system and connect it to a power outlet.
B
E SURE TO PLUG IN AN AC ADAPTER PRIOR TO REMOVING THE BATTERY. THERE IS NO BRIDGE
BATTERY PRESENT TO SUPPORT THE SYSTEM WHILE THE BATTERY IS BEING REPLACED. IF YOU DO NOT USE AN AC ADAPTER YOU WILL LOSE ANY UNSAVED FILES.
71
- Lithium ion Battery
Figure 28. Removing a Battery
2 Follow steps 3 through 6 in “Cold Swapping Batteries”.
Battery Bay Release Latches
Battery Pack
IF THE LITHIUM ION BATTERY CONNECTOR IS NOT FULLY SEATED, YOU MAY NOT BE ABLE TO USE YOUR
NOTEBOOK OR CHARGE YOUR BATTERY.
72
- Secure Digital (SD) Cards
Figure 29. Installing a Secure Digital Card
Secure Digital (SD) Cards
Your LifeBook notebook supports Secure Digital (SD) cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they don’t need a power source to retain data.
Secure Digital is a flash memory technology that allows portable storage among a variety of devices, such as cell phones, GPS systems, digital cameras, and PDAs. SD Cards transfer data quickly, with low battery consumption.
SD Card
73
- Secure Digital (SD) Cards
Inserting an SD Card
SD Cards are inserted in the SD Card slot. To install an SD Card, follow these steps:
1 See your specific card manual for instructions on the installation of your card. Some cards may require that your
notebook is off while installing them.
2 Make sure there is no card currently in the slot. If there is, see Removing an SD Card. 3 Insert your card into the slot with the product label facing up. 4 Push the card firmly into the slot until it is seated in the connector.
Removing an SD Card
To remove an SD Card, follow these easy steps:
1 Left-click Safely Remove Hardware from the system tray, then select the device to remove. 2 Push the SD Card in until it unlatches. It will then eject from the slot for removal.
INSTALLING OR REMOVING AN SD CARD DURING YOUR LIFEBOOK NOTEBOOKS SHUTDOWN OR
BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR LIFEBOOK NOTEBOOK.
D
O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS
YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR LIFEBOOK NOTEBOOK, OR BOTH.
S
EE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD. SOME CARDS MAY REQUIRE YOUR LIFEBOOK NOTEBOOK TO BE IN SLEEP MODE OR OFF WHILE REMOVING THEM.
74
- Compact Flash (CF) Cards
Compact Flash (CF) Cards
Your Fujitsu LifeBook notebook supports Compact Flash (CF) cards, which can perform a variety of functions.
Some available Compact Flash Cards include:
Memory cards
Laser barcode scanners
Magnetic stripe readers
For further information, refer to the instructions supplied with your CF Card.
Figure 30. Removing CF Card Slot Plug
Figure 31. Inserting CF Card
CF Slot Plug
CF Card
75
- Compact Flash (CF) Cards
Inserting Compact Flash Cards
Compact Flash Cards are inserted in the Compact Flash Card slot. To insert a Compact Flash Card:
1 See your Compact Flash Card manual for specific instructions on the insertion of your card. Some Compact
Flash Cards may require your notebook to be Off while inserting them.
2 When you receive your LifeBook, there will be a protective plug inserted in the slot (Figure 30). Whenever you
don’t have a Compact Flash Card inserted, be sure to replace the plug to prevent system contamination. To remove the plug, simply pull it out from the slot.
3 Insert your Compact Flash Card into the slot, with the product label facing up (Figure 31). 4 Push the card into the slot firmly until it is seated in the opening.
Removing Compact Flash Cards
To remove a Compact Flash Card, follow these easy steps:
1 See your Compact Flash Card manual for specific instructions on removing your card. Some Compact Flash
Cards may require your notebook to be in Sleep Mode or Off while removing them.
2 With a fingernail, pull the Compact Flash Card out of the slot using the lip on the bottom of the card.
INSERTING OR REMOVING A COMPACT FLASH CARD DURING YOUR L IFEBOOK NOTEBOOKS SHUTDOWN
OR BOOTUP PROCESS MAY DAMAGE THE CARD AND/OR YOUR NOTEBOOK.
DO NOT INSERT A COMPACT FLASH CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE
ON THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD, YOUR LIFEBOOK NOTEBOOK, OR BOTH.
WINDOWS HAS A SHUTDOWN PROCEDURE FOR COMPACT FLASH CARDS THAT MUST BE FOLLOWED
BEFORE REMOVING A CARD; REVIEW YOUR OPERATING SYSTEM MANUAL FOR THE CORRECT PROCEDURE. IT IS GOOD PRACTICE TO REMOVE DEVICES USING THE SAFELY REMOVE HARDWARE ICON IN THE SYSTEM TRAY.
IF THE DIALOG BOX STATES THAT THE DEVICE CANNOT BE REMOVED, YOU MUST SAVE ALL OF YOUR
OPEN FILES, CLOSE ANY OPEN APPLICATIONS AND SHUT DOWN YOUR NOTEBOOK.
DO NOT USE A MINI SD CARD ADAPTER IN THE SLOT IF IT IS DESIGNED WITH CONTACTS STICKING OUT
FROM THE CENTER OF THE BACK SIDE; THIS TYPE OF ADAPTER COULD CAUSE A SHORT CIRCUIT.
76
- Device Ports
Device Ports
Your Fujitsu LifeBook notebook and the optional Port Replicator come equipped with multiple ports to which you can connect external devices including: disk drives, keyboards, printers, etc.
The following table indicates the ports on the system and/or the port replicator.
* When used in conjunction with the included external monitor/LAN adapter cable.
Universal Serial Bus Ports
The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game pads, pointing devices, keyboards and/or speakers. There is one USB 2.0 port on your notebook and four on the optional port replicator.
In order to connect a USB device follow these steps:
1 Open the USB cover on the left side of the system. 2 Align the connector with the port opening.
Port Type Notebook
Quantity
Port Replicator
Quantity
USB 2.0 1 4
DC In 1 1
Headphone Jack 1 0
Microphone Jack 1 0
External Video Connector 1* 1
LAN connector (RJ-45) 1* 1
Port Replicator Connector 1 1
77
- Device Ports
3 Push the connector into the port until it is seated..
NOTE THAT IN ORDER FOR THE USB PORTS ON THE PORT REPLICATOR TO WORK, THE PORT R
EPLICATOR MUST BE POWERED USING AN AC ADAPTER.
Figure 32. Connecting USB to System
Figure 33. Connecting USB to Port Replicator
USB connector
USB connectors on optional port replicator (three on rear and one on side)
DUE TO ONGOING CHANGES IN USB TECHNOLOGY AND STANDARDS, NOT ALL USB DEVICES AND/OR
DRIVERS ARE GUARANTEED TO WORK.
78
- Device Ports
Headphone Jack
The headphone jack allows you to connect headphones or powered external speakers to your notebook. Your headphones or speakers must be equipped with a 1/8” (3.5 mm) stereo mini-plug. In order to connect headphones or speakers follow these easy steps:
1 Align the connector with the port opening. 2 Push the connector into the port until it is seated.
Microphone Jack
The microphone jack allows you to connect an external mono microphone. Your microphone must be equipped with a 1/8”(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook. In order to connect a microphone follow these easy steps:
1 Align the connector with the port opening. 2 Push the connector into the port until it is seated.
External Video Port
The external video port allows you to connect an external monitor or LCD projector. Note that in order to use an external video device directly with the system, you must first attach the included external video/LAN adapter cable. When connecting an external video device with the optional port replicator, it can be connected directly to the dedicated port on the port replicator.
In order to connect an external video device, follow these easy steps:
Connecting external video to the system
1 If connecting directly to the system, first connect the external video/LAN adapter cable to the port replicator
connector at the front of the system (Figure 34). Align the cable connector with the port replicator connector and push the connector into the port until it is seated.
2 Align the external video cable to the adapter cable. Tighten the two hold-down screws, located on each side of
the connector.
79
- Device Ports
Connecting external video to the optional port replicator
1 If connecting directly to the optional port replicator, align the external video cable to the connector on the port
replicator (Figure 35).
2 Tighten the two hold-down screws, located on each side of the connector.
PRESSING THE [FN] + [A] KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND YOUR
DISPLAY VIDEO. EACH TIME YOU PRESS THE KEY COMBINATION, YOU WILL STEP TO THE NEXT CHOICE, STARTING WITH THE BUILT-IN DISPLAY PANEL ONLY, MOVING TO THE EXTERNAL MONITOR ONLY, FINALLY MOVING TO BOTH THE BUILT-IN DISPLAY PANEL AND AN EXTERNAL MONITOR.
Figure 34. Connecting External Video to System Figure 35. Connecting to Port Replicator
External Monitor/ LAN Adapter
External Video Cable
External Video Cable
External Video Connector
80
- Device Ports
LAN (RJ-45) Jack
Note that in order to use the internal LAN device directly with the system, you must first attach the included external video/LAN adapter cable. When connected with the optional port replicator, you can connect directly to the dedicated LAN port on the port replicator
The LAN (RJ-45) jack is used for a 10Base-T/100Base-Tx Ethernet LAN connection. You may need to configure your notebook to work with your particular network. (Please refer to your network administrator for information on your network configuration.) To connect the LAN cable follow these easy steps:
Connecting directly to the internal LAN
1 If connecting directly to the system, first connect the external video/LAN adapter cable to the port replicator
connector at the front of the system (Figure 36). Align the cable connector with the port replicator connector and push the connector into the port until it is seated.
Figure 36. Connecting the LAN and Adapter
Figure 37. Connecting the LAN/Port Replicator
External Monitor/
LAN Adapter
LAN Cable
81
- Device Ports
2 Align the LAN connector with the port opening. 3 Push the connector into the port until it is seated. 4 Plug the other end of the cable into a LAN outlet.
Connecting to the internal LAN via optional Port Replicator
1 Align the LAN connector with the port opening on the rear of the port replicator (Figure 37). 2 Push the connector into the port until it is seated. 3 Plug the other end of the cable into a LAN outlet.
Port Replicator Connector
The port replicator connector is used for the connection of your notebook to an optional port replicator or for connection of the external video/LAN adapter cable. In order to connect your notebook to this device, follow the instructions that came with your port replicator.
82
Chapter 4
Troubleshooting Your LifeBook
Troubleshooting
There may be occasions when you encounter simple setup or operating problems that you can solve on the spot, or problems with peripheral devices that can be solved by replacing the device. The information in this section helps you isolate and resolve some of these straightforward issues and identify failures that require service.
Identifying the Problem
If you encounter a problem, go through the following procedure before pursuing complex troubleshooting:
1 Turn off your LifeBook notebook. 2 Make sure the AC adapter is plugged into your notebook and to an active AC power source. 3 Make sure that any card installed in the PC Card slot is seated properly. You can also remove the card from the
slot, thus eliminating it as a possible cause of failure.
4 Make sure that any devices connected to the external connectors are plugged in properly. You can also
disconnect such devices, thus eliminating them as possible causes of failure.
5 Turn on your notebook. Make sure it has been off at least 10 seconds before you turn it back on. 6 Go through the boot sequence. 7 If the problem has not been resolved, refer to the Troubleshooting Table that follows for more detailed
troubleshooting information.
83
- Troubleshooting
8 If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support
representative:
Toll free: 1-800-8Fujitsu (1-800-838-5487) E-mail: 8fujitsu@us.fujitsu.com Web site: http://www.computers.us.fujitsu.com/support.
Before you place the call, you should have the following information ready so that the customer support representative can provide you with the fastest possible solution:
Product name
Product configuration number
Product serial number
Purchase date
Conditions under which the problem occurred
Any error messages that have occurred
Type of device connected, if any
See the Configuration Label on the bottom of your notebook for configuration and serial numbers.
IF YOU KEEP NOTES ABOUT WHAT YOU HAVE TRIED, YOUR SUPPORT REPRESENTATIVE MAY BE
ABLE TO HELP YOU MORE QUICKLY BY GIVING ADDITIONAL SUGGESTIONS OVER THE PHONE.
84
- Troubleshooting
Specific Problems
Using the Troubleshooting Table
When you have problems with your LifeBook notebook, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions. All possible causes or solutions may not apply to your notebook.
Troubleshooting Table
Problem Page
Audio Problems . . . . . . . . . . . . . . page 84
Optical Drive Problems . . . . . . . . page 85
Port Replicator Problems. . . . . . . page 86
Hard Drive Problems . . . . . . . . . . page 86
Keyboard or Mouse Problems . . . page 86
Memory Problems . . . . . . . . . . . . page 87
Problem Page
Modem Problems page 87
USB Device Problems . . . . . . . . . page 87
Power Failures . . . . . . . . . . . . . . . page 87
Shutdown and Startup Problems . page 90
Video Problems . . . . . . . . . . . . . . page 90
Miscellaneous Problems . . . . . . . . page 92
Problem Possible Cause Possible Solutions Audio Problems
There is no sound coming from the built-in speaker.
The volume is turned too low. Adjust the volume control on the left side of your notebook
Headphones are plugged into your notebook.
Plugging in headphones disables the built-in speakers. Remove the headphones.
85
- Troubleshooting
There is no sound coming from the built-in speaker (continued)
Software driver is not configured correctly.
The audio driver may be installed or reinstalled using the Drivers and Applications CD that came with your Fujitsu LifeBook. Refer to your application and operating system documentation for help.
The speakers have been muted using the Volume icon in the system tray.
Click on the Volume icon in the system tray on the bottom right of the screen. (It looks like a speaker). If the Mute box is checked (Windows XP) or the Mute icon has a red circle on it (Windows Vista), click on it to deselect it.
Optical Drive Problems (optional external device)
LifeBook notebook fails to recognize optical discs.
The disc is not pushed down onto raised center circle of the drive.
Open optical drive tray and re-install the disc properly.
Optical drive tray is not latched shut.
Push on the front of the optical drive tray until it latches. If that doesn’t work, pull out the modular drive latch to remove the device from the bay, then re-insert the drive until it latched; this ensures that the drive is properly seated.
Incorrect DVD Player or no DVD Player software is installed.
Install DVD Player software.
Wrong drive designator was used for the disc in the appli­cation.
Verify the drive designator used by the application is the same as the one used by the operating system. When the operating system is booted from a DVD/CD, drive designa­tions are automatically adjusted. Note that the drive designa­tion can be changed with the Disk Management tool located at Administrative Tools > Computer Management.
DVD/CD-RW/CD-ROM is dirty or defective.
Wipe the disc with a non-abrasive CD cleaning cloth and reinsert. It if still will not work try another DVD/CD-RW/CD­ROM in the drive.
Problem Possible Cause Possible Solutions
86
- Troubleshooting
Port Replicator Problems
Notebook does not turn on when installed in the optional Port Replicator
Port Replicator AC adapter is not plugged in.
Provide power to the Port Replicator.
Notebook is not properly seated in the Port Replicator.
Remove and re-dock your LifeBook notebook.
Hard Drive Problems
You cannot access your hard drive.
The wrong drive designator was used by an application when a bootable disc was used to start the notebook.
Verify drive designator used by application is in use by the operating system. When the operating system is booted from a CD, drive designations are automatically adjusted.
Security is set so your operat­ing system cannot be started without a password.
Verify your password and security settings.
Keyboard or Mouse Problems
The built-in keyboard does not seem to work.
The notebook has gone into Sleep mode.
Push the Power/Suspend/Resume button.
Your application has locked out your keyboard.
Try to use your integrated pointing device to restart your system.
You have installed an external keyboard or mouse, and it does not seem to work.
Your external device is not properly installed.
Re-install your device. See “Device Ports” on page 76.
Your operating system is not set up with correct software driver for that device.
Check your device and operating system documentation and activate the proper driver.
An external keyboard or a mouse and it seems to be locking up the system.
Your operating system is not set up with correct software driver for that device.
Check your device and operating system documentation and activate the proper driver.
Your system has crashed. Try to restart your notebook. I
Problem Possible Cause Possible Solutions
87
- Troubleshooting
Memory Problems
Your System screen in the Control Panel does not show the correct amount of installed memory.
You have a memory failure. Check for Power On Self Test (POST) messages. See
“Power On Self Test Messages” on page 93.
Modem Problems (optional device)
Messages about modem operation.
Messages about modem operation are generated by whichever modem applica­tion is in use.
See your application software documentation for additional information.
USB Device Problems
You have installed a USB device. Your LifeBook notebook does not recog­nize the device, or the device does not seem to work properly.
The device is not properly installed.
Remove and re-install the device. See “Device Ports” on
page 76.
The device may have been installed while an application was running, so the notebook is not aware of its installation.
Close the application and restart your notebook.
Your device may not have the correct software driver active.
See your software documentation and activate the correct driver.
Power Failures
You turn on your LifeBook notebook and nothing seems to happen.
The installed battery is com­pletely discharged or there is no Power adapter (AC or Auto/Airline) installed.
Check the Status Indicator Panel to determine the presence and condition of the battery. See “Status Indicator Panel” on page 29. Install a charged battery or a Power adapter.
The battery is installed but is faulty.
Use the Status Indicator panel to verify the presence and condition of the battery. See “Status Indicator Panel” on page 29. If the battery indicates a short, remove it and operate from another power source or replace that battery.
Problem Possible Cause Possible Solutions
88
- Troubleshooting
You turn on your LifeBook notebook and nothing seems to happen.
(continued)
The battery is low. Check the Status Indicator Panel to determine the presence
and condition of the battery. See “Status Indicator Panel” on page 29. Use a Power adapter to operate until a battery is charged or install a charged battery.
The power adapter (AC or auto/airline) is not plugged in properly.
Verify that your adapter is connected correctly. See “Power
Sources” on page 52.
The power adapter (AC or auto/airline) has no power from the AC outlet, airplane jack, or car cigarette lighter.
Move the AC cord to a different outlet, check for a line switch or tripped circuit breaker for the AC outlet. If you are using an auto/airline adapter in a car make sure the ignition switch is in the On or Accessories position.
The power adapter (AC or auto/airline) is faulty.
Try a different power adapter.
Your LifeBook notebook turns off all by itself.
The power management parameters are set for auto timeouts which are too short for your operating needs.
Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Power/ Suspend/ Resume button. Check your power management settings, or close your applications and go to the Power Options located in the Control Panel to adjust the timeout values to better suit your needs.
You are operating on battery power and ignored a low bat­tery alarm until the battery was at the dead battery state and the system has entered Dead Battery Suspend mode.
Install a power adapter, then push the Power/Sus­pend/Resume button. See “Power Sources” on page 52.
You have a battery failure. Verify the condition of the battery using the Status Indicator
panel. If the battery is shorted, replace or remove it. See
“Status Indicator Panel” on page 29.
Your power adapter has failed or lost its power source.
Make sure the adapter is plugged in and the outlet has power.
Problem Possible Cause Possible Solutions
89
- Troubleshooting
Your LifeBook notebook will not work on battery alone.
The installed battery is dead. Replace the battery with a charged one or install a power
adapter.
No battery is installed. Install a charged battery.
The battery is improperly installed.
Verify that the battery is properly connected by re-installing it.
Your installed battery is faulty. Verify the condition of the battery using the Status Indicator
panel and replace or remove any batteries that are shorted.
See “Status Indicator Panel” on page 29.
The battery seems to discharge too quickly.
Battery has been exposed to high temperatures.
Replace the battery.
You are running an applica­tion that uses a lot of power due to frequent hard drive access or optical drive access, or use of a modem, LAN PC card, Wireless LAN, or Bluetooth device.
Use a power adapter for this application when at all possible.
The power savings features may be disabled.
Check the Power Options menu settings and adjust accord­ing to your operating needs.
The brightness is turned all the way up.
Turn down the brightness adjustment. The higher the brightness the more power your display uses.
The battery is very old. Replace the battery.
The battery has been exposed to high tempera­tures.
Replace the battery.
The battery is too hot or too cold.
Restore the notebook to normal operating temperature. Charging icon on the Status Indicator panel will flash when battery is outside of operating range.
Problem Possible Cause Possible Solutions
90
- Troubleshooting
Shutdown and Startup Problems
The Power/Suspend/ Resume button does not work.
Power/Suspend/Resume button is disabled.
In Windows XP, enable the button by going to the Control Panel -> Power Options Properties and clicking on the Advanced tab. In the Power buttons area, select the option that best suits your needs. In Windows Vista, select the Choose what the power button does option.
There may be application software. conflict
Close all applications and try the button again.
The system powers up, and displays power on information, but fails to load the operating system.
The boot sequence settings of the setup utility are not compatible with your configu­ration.
Set the operating source by pressing the [ESC] key while the Fujitsu logo is on screen or use the [F2] key and enter the setup utility and adjust the source settings from the Boot menu. See “BIOS Setup Utility” on page 56.
You have a secured system requiring a password to load your operating system.
Make sure you have the right password. Enter the setup util­ity and verify the Security settings and modify them as accordingly. See “BIOS Setup Utility” on page 56.
An error message is dis­played on the screen dur­ing the notebook (boot) sequence.
Power On Self Test (POST) has detected a problem.
See the Power On Self Test (POST) messages to determine the meaning and severity of the problem. Not all messages are errors; some are simply status indicators. See “Power On
Self Test Messages” on page 93.
Your notebook appears to change setup parameters when you start it.
BIOS setup changes were not saved when made and you exited the setup utility.
Make sure you select Save Changes And Exit when exiting the BIOS setup utility.
The BIOS CMOS hold-up bat­tery has failed.
Contact your support representative for repairs. This is not a user serviceable part but has a normal life of 3 to 5 years.
Video Problems
The built-in display is blank when you turn on your LifeBook notebook.
Display angle and brightness settings are not adequate for your lighting conditions.
Move the display and the brightness control until you have adequate visibility.
Problem Possible Cause Possible Solutions
91
- Troubleshooting
The built-in display is blank when you turn on your LifeBook notebook. (continued)
The notebook is set for an external monitor only.
Pressing [A] while holding down the [Fn] key allows you to change your selection of where to send your display video. Each time you press the keys you will step to the next choice. The choices, in order are: built-in display only, external moni­tor only, both built-in display and external monitor.
Power management timeouts are set for short intervals and you didn’t see the display go on and off again.
Press a keyboard button or move the mouse to restore oper­ation. If that fails, push the Power/Suspend/Resume button. (The display may be shut off by Sleep mode, Auto Suspend or Video Timeout)
The notebook turned on with a series of beeps and the built-in display is blank.
Power On Self Test (POST) has detected a failure which does not allow the display to operate.
Contact your support representative.
The display goes blank by itself after you have been using it.
The notebook has gone into Video timeout, Sleep mode, or Save-to-Disk mode because you have not used it for a period of time.
Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Power/Suspend/ Resume button. Check your power management settings, or close your applications and go to the Power Savings menu of the setup utility to adjust the timeout values to better suit your operation needs. See “BIOS Setup Utility” on page 56.
The power management time­outs may be set for very short intervals and you failed to notice the display come on and go off again.
Press any button on the keyboard, or move the mouse to restore operation. If that fails, push the Power/Suspend/ Resume button. (The display may be shut off by Sleep Mode, Auto Suspend or Video Timeout)
The display has bright or dark spots.
If the spots are very tiny and few in number, this is normal for a large LCD display.
This is normal; do nothing.
If the spots are numerous or large enough to interfere with your operation needs.
Display is faulty; contact your support representative.
Problem Possible Cause Possible Solutions
92
- Troubleshooting
The Display is dark when on battery power.
The Power Management util­ity default is set on low bright­ness to conserve power.
Press [Fn] +
[" / '] to increase brightness or double-click on
the battery gauge and adjust Power Control under battery settings.
You have connected an external monitor and it does not display any information.
Your BIOS setup is not set to enable your external monitor.
Toggle the video destination by pressing [Fn] + [_ / -] together, or check your BIOS setup and enable your external monitor. (See the Video Features submenu, located within the Advanced Menu of the BIOS. See “BIOS Setup Utility” on
page 56.
Your external monitor is not properly installed.
Reinstall your device. See “External Video Port” on page 78.
Your operating system is not setup with the correct soft­ware driver for that device.
Check your device and operating system documentation and activate the proper driver.
You have connected an external monitor and it does not come on.
Your external monitor is not compatible with your LifeBook notebook.
See your monitor documentation and the External Monitor Support portions of the Specifications section. See “Specifi­cations” on page 112.
Miscellaneous Problems
Error message is dis­played on the screen dur­ing the operation of an application.
Application software often has its own set of error message displays.
See your application manual and help displays screens for more information. Not all messages are errors some may simply be status.
Problem Possible Cause Possible Solutions
93
- Troubleshooting
Power On Self Test Messages
The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual. If you can find no reference to the message and its meaning is not clear, contact your support representative for assistance.
nnnn Memory Cache Passed
Where nnnn is the amount of system cache in kilobytes successfully tested by the Power On Self Test. (This can only appear if you have an SRAM PC Card installed.)
Floppy Disk drive A error or Floppy Disk drive B error
Drive A: or B: is present but fails the BIOS Power On Self Test diskette tests. Check to see that the drive is defined with the proper diskette type in the Setup Utility, See “BIOS Setup Utility” on page 56. and that the diskette drive is installed correctly. If the disk drive is properly defined and installed, avoid using it and contact your support representative.
*Extended Memory Failed at address line: xx
Extended memory not working or not configured properly. If you have an installed memory upgrade module, verify that the module is properly installed. If it is properly installed, you may want to check your Windows Setup to be sure it is not using unavailable memory until you can contact your support representative.
nnnn Extended RAM Passed
Where nnnn is the amount of memory in kilobytes successfully tested.
94
- Troubleshooting
*Failure Fixed Disk n (where x=1-4)
The fixed disk is not working or not configured properly. This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to check for the hard drive type settings and correct them if necessary. If the settings are OK and the message appears when you restart the system, there may be a serious fault which might cause you to lose data if you continue. Contact your support representative.
*Incorrect Drive A type – run SETUP
Type of floppy drive A: not correctly identified in Setup. This means that the floppy disk drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to correct the inconsistency.
*Incorrect Drive B type – run SETUP
Type of floppy drive B: not correctly identified in Setup. This means that the floppy disk drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to correct the inconsistency.
*Invalid NVRAM Data
Problem with NVRAM access. In the unlikely case that you see this message you may have some display problems. You can continue operating but should contact your support representative for more information.
*Keyboard controller error
The keyboard controller test failed. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.
*Keyboard error
Keyboard not working. You may have to replace your keyboard or keyboard controller but may be able to use an external keyboard until then. Contact your support representative.
95
- Troubleshooting
*Stuck Key
BIOS discovered a stuck key and displays the scan code for the stuck key. You may have to replace your keyboard but may be able to use an external keyboard until then. Contact your support representative.
*Monitor type does not match CMOS – Run SETUP
Monitor type not correctly identified in Setup. This error probably means your BIOS is corrupted, run the setup utility and set all settings to the default conditions. If you still get this error, contact your support representative.
*Operating system not found
Operating system cannot be located on either drive A: or drive C: Enter the setup utility and see if both the fixed disk, and drive A: are properly identified and that the boot sequence is set correctly. Unless you have changed your installation greatly, the operating system should be on drive C:. If the setup utility is correctly set, your hard drive may be corrupted.
*Parity Check 1 nnnn
Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. This is a potentially data destroying failure. Contact your support representative.
*Parity Check 2 nnnn
Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. This is a potentially data-destroying failure. Contact your support representative.
*Press <F1> to resume, <F2> to SETUP
Displayed after any recoverable error message. Press the [F1] key to continue the boot process or the [F2] key to enter Setup and change any settings.
96
- Troubleshooting
*Previous boot incomplete – Default configuration used
Previous Power On Self Test did not complete successfully. The Power On Self Test will load default values and offer to run Setup. If the previous failure was caused by incorrect values and they are not corrected, the next boot will likely fail also. If using the default settings does not allow you to complete a successful boot sequence, you should turn off the power and contact your support representative.
*Real time clock error
Real-time clock fails BIOS test. May require board repair. Contact your support representative.
*Shadow RAM Failed at offset: nnnn
Shadow RAM failed at offset nnnn of the 64k block at which the error was detected. You are risking data corruption if you continue. Contact your support representative.
nnnn Shadow RAM Passed
Where nnnn is the amount of shadow RAM in kilobytes successfully tested.
*System battery is dead – Replace and run SETUP
The BIOS CMOS RAM memory hold up battery is dead. This is part of your BIOS and is a board mounted battery which requires a support representative to change. You can continue operating but you will have to use setup utility default values or reconfigure your setup utility every time you turn off your notebook.
System BIOS shadowed
System BIOS copied to shadow RAM.
*System CMOS checksum bad – Default Configuration Used
BIOS CMOS RAM has been corrupted or modified incorrectly, perhaps by an application program that changes data stored in BIOS memory. Run Setup and reconfigure the system.
97
- Troubleshooting
*System RAM Failed at offset: nnnn
System memory failed at offset nnnn of in the 64k block at which the error was detected. This means that there is a fault in your built-in memory. If you continue to operate, you risk corrupting your data. Contact your support representative for repairs.
nnnn System Memory Passed
Where nnnn is the amount of system memory in kilobytes successfully tested.
*System timer error
The timer test failed. The main clock that operates the computer is faulty. Requires repair of system board. Contact your support representative for repairs.
Video BIOS shadowed
Video BIOS successfully copied to shadow RAM. .
98
- Restoring Your Pre-installed Software
Restoring Your Pre-installed Software
The Drivers and Applications Restore (DAR) DVD contains sets of device drivers and Fujitsu utilities (in specific directories) that are unique to your computer configuration for use as documented below.
Re-installing Individual Drivers and Applications
The Drivers and Applications CD can be used to selectively re-install drivers and/or applications that may have been uninstalled or corrupted.
To re-install drivers and/or applications:
1 Connect an external DVD drive to your LifeBook 1 Boot up the system and insert the DAR CD after Windows has started. A Fujitsu Installer screen is displayed
after the CD is inserted.
2 After reading the License Agreement, click [I agree].
IN ORDER TO INSTALL APPLICATIONS AND/OR DRIVERS FROM THE DAR CD, YOU WILL NEED TO USE A DVD
DRIVE ATTACHED EXTERNALLY.
IF YOU HAVE ACCESS TO THE INTERNET, VISIT THE FUJITSU SUPPORT WEBSITE AT
HTTP://WWW.COMPUTERS.US.FUJITSU.COM/SUPPORT TO CHECK FOR THE MOST CURRENT INFORMATION, DRIVERS AND HINTS ON HOW TO PERFORM RECOVERY AND SYSTEM UPDATES.
THERE MAY BE CERTAIN FREE THIRD-PARTY APPLICATIONS PRE-INSTALLED ON YOUR SYSTEM THAT
ARE NOT ON THE DAR CD. THE LATEST VERSIONS OF THE APPLICATIONS CAN BE DOWNLOADED FROM THE THIRD-PARTYS WEBSITE.
99
- Restoring Your Pre-installed Software
3 A window will appear containing a list of applications, drivers, and utilities that you can install from the Drivers
and Applications CD
.
4 In the list, check off all the components you want to install. If you want to install all components, click [Select
All]. Clicking [Select All] will select all of the blue-coded components; you must select grey and green components separately.
5 Once you have selected the components you wish to install, click [Install Selected Subsystems]; the
components will be installed.
6 After the components are installed, click [OK], then click [Yes] when asked if you want to reboot the system.
Restoring the Operating System for Windows Vista Systems
The Recovery and Utility disc contains four utilities:
The Recovery utility allows you to restore the system operating system (OS). The restored OS is
the same one that was originally installed on the hard disk drive. After the OS is restored, you will need to reinstall the drivers and applications from the Drivers and Applications Restore disc and from any application discs that were bundled with the system when you purchased it.
The Hard Disk Data Delete utility on this disc is used to delete all data on your hard disk
and prevent it from being reused. Do not use the Hard Disk Data Delete utility unless you are absolutely certain that you want to erase your entire hard disk, including all partitions.
The Partition Creation utility allows you to create a new D: partition or resize existing
partitions on your hard disk. NOTE: Creating or resizing partitions with this utility will cause
all data on the hard disk to be completely erased.
The Diagnostics utility allows the IT professional to determine device status/condition by
executing diagnostics tests on selected system components.
THE COMPONENTS LISTED ARE COLOR-CODED IN TERMS OF THEIR INSTALL STATUS. BLUE INDICATES
THAT THE COMPONENT CAN BE INSTALLED. GREEN INDICATES THAT THE COMPONENT NEEDS TO BE INSTALLED SEPARATELY. GREY INDICATES A COMPONENT THAT IS ALREADY INSTALLED; GREY ITEMS CAN BE REINSTALLED, BUT PRIOR TO INSTALLATION YOU WILL RECEIVE A REMINDER THAT THE COMPONENT IS ALREADY INSTALLED.
100
- Restoring Your Pre-installed Software
Methods for accessing the utilities
In order to determine the method for accessing the Recovery and Utility applet, perform the following procedures in order.
Determining whether Recovery and Utility is pre-loaded
1 Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key. 2 From the Boot Menu that appears, check whether the <Recovery and Utility> option is present. If it is not
present, it means that the utility must be used from the disc. Proceed to
“Running Recovery and Utility from the
disc” if <Recovery and Utility> is unavailable.
3 You can also use the TrustedCore menu to determine whether the utility is pre-loaded by powering on your
system then pressing the {Enter] key when the Fujitsu logo appears on the screen. The TrustedCore Menu will appear and the Recovery and Utility option will appear in the menu.
Running Recovery and Utility from hard disk
1 Cursor down to <Recovery and Utility> and press the [Enter] key. 2 While the files are being loaded from the disc, a progress bar will appear at the bottom of the screen. 3 When the System Recovery Options dialog opens, select a new keyboard layout, if necessary, then click [Next]. 4 When the Operating System dialog appears, click [Next]. 5 If necessary, enter your password, then click [OK]. 6 When System Recovery Options window appears, click on Recovery and Utility. 7 The Recovery and Utility screen appears on the screen with three tabs: Diagnostics, Recovery and Utility.
Please note that Diagnostics tab is not supported on certain LifeBook/Stylistic models when running Recovery and Utility from the hard disk. In order to restore the operating system, please insert the “Recovery and Utility” disc in the CD/DVD drive and use the Start Recovery function under the Recovery tab. For more information about the tabs, go to
“Recovery and Utility tabs” on page 101.
Running Recovery and Utility from the disc
To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps:
Loading...