F906i.book Page 83 Monday, April 21, 2008 10:59 PM
Phonebook new entry
Adding to phonebook
You can add to FOMA terminal phonebook or UIM phonebook.
・
Note that, when changing the models at a sales outlet such as DoCoMo shop,
data saved in FOMA terminal may not be copied to a new model terminal due
to its specifications.
・
Priority of incoming/outgoing operation→P104
・
Savable number→P82
d
(1 sec. or more)
1
・
When operating from the phonebook list, press
Adding to UIM phonebook : m [Phonebook & Logs]
Enter a name
2
Set the required items
3
Phonebook number (No.000-999) :
is assigned.
・
When a phonebook number that is already saved is specified, a
confirmation screen for overwriting appears when adding. When not
overwriting, select "New entry" and specify another phonebook number.
・
Zeroes before single- or double-digit phonebook numbers can be
omitted.
Reading :
Reading of the entered name is entered.
・
Even if you correct the name, the reading does not reflect the change.
Select/Shoot image :
receiving/making a call or checking the phonebook data. This item is
displayed when the saved person calls with the caller ID.
Setting image :
Reading folders and lists of images→P294
・
If a still image that vertical to horizontal size (or vice versa) is larger than
×
480 dots is selected, the image shrinking confirmation screen
864
appears.
・
Created animation does not operate.
Setting still image by shooting with camera :
eg
image
・
The size of a still image to be shot is fixed to Ph.Book (96×72).
eC
The lowest available phonebook number
Set an image or movie/i-motion that is displayed when
1e
Select a foldereSelect an image
m2
2e
.
4
Shoot still
Setting movie/i-motion :
Reading folders and lists of movies/i-motion→P299
・
Movie/i-motion of only image can be set.→P302
・
This function is not available when dialing.
Setting movie by recording with camera :
・
Sounds are not recorded.→P145
Returning to the initial screen :
Group : "グループなし
・
For FOMA terminal phonebook, press a to add a group.→P84
Phone number :
・
For FOMA terminal phonebook, icon can be selected, and saving the first
item displays items to be added.
・
Pause ("P"), Timed pause ("T"), "+", "#" and sub-address delimiter ("*")
can be saved. Timed pause ("T") cannot be saved in UIM phonebook.
・
If a phone number prefixed with "186" or "184" is added in phonebook,
SMS cannot be sent even when the number is selected as the address.
Mail address :
・
For FOMA terminal phonebook, icon can be selected, and saving the first
item displays items to be added.
Secret code
Birthday :
Note :
PostalCode/Address :
byte (200 one-byte) characters for an address can be entered.
Location info :
and/or location history.
Company name :
entered.
Job title :
URL :
Up to 50 one-byte characters can be entered.
→
P89
Set Set birthday to "ON" and enter the birthday.
Up to 100 two-byte (200 one-byte) characters can be entered.
Add location information according to the current location
Up to 50 two-byte (100 one-byte) characters can be entered.
Up to 256 one-byte characters can be entered.
3e
Select a foldereSelect a movie/i-motion
4e
Record video
5
(No group)" is set by default.
Up to 26 digits can be entered.→P43
Up to 7 digits for a postal code and up to 100 two-
→
P253
Up to 50 two-byte (100 one-byte) characters can be
eg
Phonebook
83
F906i_E1kou
F906i.book Page 84 Monday, April 21, 2008 10:59 PM
Alert by contact
Setting receiving actions for each phonebook
entry
Operations such as ring alert and light alert of voice calls, videophone calls or mail
can be set for each phonebook entry saved in FOMA terminal phonebook.
・
Priority of incoming operation→P96, 97, 113
de
1
✔
・
Search the phonebookePlace the cursor on a phonebook
entry to set and
h
: Switching Call and Mail screens.
・
Setting to "
is set, Substitute image is set to "Terminal setting" and other items to
"Group setting".
Ring alert :
/
Call ring alert, V.phone ring alert or Mail ring alert.
・
Only when setting Ring alert of the detail information to "Available",
movies/i-motion and Music can be set as ring alert.
Setting Music
Vibrate alert :
/
on Vibrate alert/effect.
Light alert :
/
Light alert.
・
If setting Light pattern to "Light pattern 1", "Light pattern 2" or "Sync
melody", the light blinks in multiple colors. Light color cannot be set.
Light color :
/
Light alert.
Substitute image (Call alert only) :
operation depends on Image setting/Videophone image.
m32e
グループなし
(No group)" set all to "Terminal setting". If Group
When set to "Terminal setting", the operation depends on
→
P95
When set to "Terminal setting", the operation depends
When set to "Terminal setting", the operation depends on
When set to "Terminal setting", the operation depends on
Set the required items
When set to "Terminal setting", the
INFORMATION
Operation from FOMA terminal phonebook details screen : m→
"Alert by contact"
"Edit/Settings"
eC
→
Group setting
Making group settings
・
For "
グループなし
incoming/outgoing operation is unavailable.
・
For UIM phonebook, only renaming group name is available.
<Example> Adding groups
m
[Phonebook & Logs]
1
m2
2
Deleting a group : Place the cursor on the group and
m3e
The group and the phonebook entries in it are deleted. The phonebook entries
in PushTalk phonebook are also deleted.
・
Even in Privacy mode (when Call & Logs is "Hide set contact"), the
phonebook entries with secrecy are deleted.
・
For "
deleted.
Changing a group name : Place the cursor on the group and
・
For UIM phonebook, press C, place the cursor on the group and press
m2
Setting the incoming/outgoing operation of the group : Place the cursor on
the group and
Setting Call image→P83 Step 3 in "Adding to phonebook"
Setting other items
entry"
Changing the order of the groups : Place the cursor on the group and
me6
Enter a group name (up to 10 two-byte (20 one-byte)
3
characters)
・
For UIM phonebook, 10 two-byte (21 one-byte) characters can be entered.
Up to 10 characters can be entered when one- and two-byte characters are
both used or one-byte katakana is included.
(No group)", renaming group name or setting/deleting
12
Authenticatee"Yes"
グループなし
(No group)", only the phonebook entry in the group is
.
m5e
or
7
Set the required items
→
P84 "Setting receiving actions for each phonebook
eC
eC
m4
Phonebook
84
F906i_E1kou
F906i.book Page 85 Monday, April 21, 2008 10:59 PM
Phonebook search
Making calls using phonebook
Call up the phonebook entry from FOMA terminal phonebook or UIM phonebook
for the party to call.
・
In Privacy mode (when Call & Logs is "Hide set contact"), the phonebook entries
or groups with secrecy cannot be searched. The same applies to Quick dial,
Quick mail, Headset quick-dial and Search message.
de
1
2
Search the phonebook
The previously used phonebook (FOMA terminal phonebook or UIM
phonebook) is displayed.
・
The phonebook list of Show all names is displayed by default. The setting
can be changed to display the search method frequently used.
a
b
a
Icon set for first entry
b
Number of phone numbers and mail addresses saved in entry at the
cursor position
c
Icons set in Ph.book 2in1 setting (with 2in1 ON in Dual mode)
: Phonebook entries in A mode
: Phonebook entries in B mode
: Phonebook entries in both A and B modes
d
The first phone number of the party at the cursor position
Phonebook list (Show all names)
Place the cursor on the party and n or
・
When operating from the details screen, display a phone number and press
n
or I. Pressing g also makes a call.
・
To make a call specifying conditions by pressing
c
d
I
m11.→
→
P86
P59
・
With 2in1 ON in Dual mode, Number A is used to make a call to a party set
to "A" or "Common" in Ph.book 2in1 setting and Number B is used for a
party set to "B".
❖
Using phonebook entries
Creating an i-mode mail : Place the cursor on the party to send a mail to and
・
When operating from the details screen, display a mail address and press a
or
g
.
Creating and sending methods of i-mode mail
Creating SMS : Place the cursor on the party and a(1 sec. or more)
・
For the party that only the phone number is saved, pressing a can also create
SMS.
・
When operating from the details screen, display a phone number and press a.
Creating and sending SMS
Displaying sites : Place the cursor on the party and
・
When operating from the details screen, display URL and press g and select
"Yes".
・
Press I on the site connection confirmation screen to display using Full
Browser.
Using Location info : Place the cursor on the party and
・
When operating from the details screen, display the location information and
press
g
The next procedure
Attaching phonebook data to mail : Place the cursor on the party and
Creating and sending methods of i-mode mail→P180
Searching a sent/received mail : Place the cursor on the party and
・
.
m13
m16e1
For UIM phonebook, place the cursor on the party and press
1
press
or 2.
→
P218
→
P253 "■Use location info menu"
or
2
→
P180
m15e
"Yes"
m0
m15
Phonebook
a
, and
85
F906i_E1kou
F906i.book Page 86 Monday, April 21, 2008 10:59 PM
◆
Searching by specifying the search method
・
In search method available for UIM phonebook, pressing C on a phonebook
list switches FOMA terminal phonebook list and UIM phonebook list.
・
is displayed on the left of each entry name in the UIM phonebook list.
・
When a phonebook list extends to multiple pages, you can switch pages using
▲▼
side keys [
used to switch pages.
m
1
・
Specify the search method
2
Showing all names (Japanese syllabary) :
・
・
Searching by group :
・
・
Searching by frequency* :
Displayed in the order of number of calls or number of mails.
・
・
・
]. In a search method except Show all names, h may also be
[Phonebook & Logs]
When operating from the phonebook list, press
h
Displayed in the order of the Japanese syllabary (あ (a) line→か (ka) line
…
→わ
(wa) line)→他 (alphabets, numbers, reading starting with a blank
space, symbols, no reading).
Each time you enter 1 character in reading, the phone number with the
closest reading is searched (Name search).
The entries in the specified group are displayed in the order of the reading
below.
Japanese syllabary order
starting with blanks
If one of the keypads of 0-9, #, * is pressed, the line to which
the keypad is assigned is displayed.
1
: あ (a) line 2 : か (ka) line 3 : さ (sa) line 4 : た (ta) line
5
: な (na) line 6 : は (ha) line 7 : ま (ma) line 8 : や (ya) line
9
: ら (ra) line 0 : わ (wa) line */# : alphabets, numbers,
symbols
Counted up to 9,999 items.
PushTalk communications are not counted.
When resetting total number of calls and mails, place the cursor on the
party, press
m93
1
m5
1e
Select the line to display by
2e
Select a group
→
Alphabetical order→Numbers→Reading
→
Symbols→No reading
3e1
or
2
and select "Yes".
.
Searching by phonebook number* :
・
Zeroes before single- or double-digit phonebook numbers can be omitted.
・
You can display the phonebook list in phonebook number order by
C
pressing
Searching by phone number :
Search the phone numbers containing the entered numbers, and phonebook
data list of FOMA terminal phonebook is displayed in the order of the
phonebook number, and the phonebook data list of UIM phonebook is
displayed in the order of reading.
・
You can display the phonebook data list in the order of phonebook number
or reading by pressing
Searching by secret attribute* :
The phonebook entries with secret attribute are displayed in the order of
phonebook number.
*
→
Unavailable for UIM phonebook.
❖
Searching by Rocket search
Search phonebook entry by the characters assigned to keypads 0-9.
<Example> Searching for "
2 (か
1
The phonebook list of the Show all names is displayed.
◆
Setting preferred search method <Default search
with no entry.
(ka) line)
携帯花子
ed
5e
C
with no entry.
6
"(Keitai Hanako)
4e
Enter phonebook number
Enter part of a phone number
setting>
Set the search method displayed when pressing d on the stand-by display.
m
[Phonebook & Logs]
1
method and
・
Check mark appears after the specified search method.
✔
INFORMATION
・
Even with Search by freq or Ph book No. search set by priority, pressing d on the
stand-by display causes the UIM phonebook list for Show all names to be displayed
if UIM phonebook was searched previously.
m
1e
Place the cursor on the search
eC
eC
Phonebook
86
F906i_E1kou
F906i.book Page 87 Monday, April 21, 2008 10:59 PM
View preference of phonebook, Redial, Received calls, Mail logs and User
information are reflected to each of them.
de
1
entry
・
When operating from UIM phonebook, press
3
Show with image :
Show only name :
Show saved image :
saved image, and settings in "Show only name" are used when not.
.
m91
Search the phonebookeSelect a phonebook
em94e1-3
.
An image appears.
No image appears.
Settings in "Show with image" are used when there is a
h
.
m93
and 1-
Phonebook
87
F906i_E1kou
F906i.book Page 88 Monday, April 21, 2008 10:59 PM
Edit phonebook
Editing phonebook entries
・
The identical phonebook entries in PushTalk phonebook are also edited.
◆
Editing saved data
de
1
2
✔
・
・
・
・
◆
Copied item can be pasted into screen entry fields such as in the mail creation
screen or the phonebook data entry screen.
・
1
Search the phonebookePlace the cursor on a phonebook
entry and
Set the required items→P83 Step 2-3 in "Adding to phonebook"
C
The selection confirmation screen of saving method appears. If overwritten,
the phonebook entry already saved is discarded.
・
INFORMATION
Operation from FOMA terminal phonebook details screen : m→
"Edit"
Operation from UIM phonebook : m→
For UIM phonebook, the phone number may not be overwritten when it contains "*".
When multiple phone numbers or mail addresses are saved and the phone number
or mail address in the first entry is deleted, the second or subsequent entry moves
forward.
m31e
When a phone number saved in PushTalk phonebook is deleted, if
overwritten, it is also deleted from the PushTalk phonebook.
Edit a phonebook entry
"Edit/Settings"
"Edit"
Copying saved data
The last copied item is recorded until the power is turned OFF, and it can be
pasted to anywhere any number of times.
de
Search the phonebookePlace the cursor on a phonebook
entry to copy and
The data of appropriate items are recorded temporarily. The first saved phone
number and mail address are copied.
・
When operating from UIM phonebook, press
m6e1-8
m6
and 1-3.
・
When copying the second or subsequent phone number or mail address,
display the phone number or mail address to be copied on the details
screen, press
Display the character entry screen to pasteePaste the characters
2
Pasting method of characters→P383
◆
Switching order of phone numbers and mail addresses
When multiple phone numbers or mail addresses are saved in FOMA terminal
phonebook entry, the order of the phone numbers or mail addresses are switched.
<Example> Switching the order of the phone numbers saved
de
1
entry and
・
Press
Select a phone number to set as the first phone number
2
The positions of the selected phone number and first phone number are
→
switched.
✔
INFORMATION
・
Operation from FOMA terminal phonebook details screen : m→
"Switch order"→"Phone numbers" or "Mail addresses"
Search the phonebookePlace the cursor on a phonebook
m341
m342
Search the phonebookePlace the cursor on a phonebook
m343e
to switch the mail addresses.
Select the destination phonebook
"Edit/Settings"
"Edit/Settings"
→
→
Phonebook
88
F906i_E1kou
F906i.book Page 89 Monday, April 21, 2008 10:59 PM
Copying phonebook entries
Entries in FOMA terminal phonebook are copied to UIM phonebook and from UIM
phonebook to FOMA terminal phonebook.
・
FOMA terminal phonebook also can be copied into microSD card.→P310
・
If there is a group of the same name in the copy destination, copied to the group.
・
When copying from FOMA terminal phonebook to UIM phonebook, the saved
timer ("T") as phone number is deleted.
・
The icons of phone number are all replaced with , and those of mail
addresses are replaced with .
・
If the number of characters exceeds the limit that can be saved in UIM
phonebook, the exceeding part is deleted.
<Example> Copying from FOMA terminal phonebook to UIM phonebook
de
1
Search the phonebook
phonebook entry
・
When copying from UIM phonebook to FOMA terminal phonebook, press
m7
Delete phonebook
eC
to select a phonebook entry, and press C.
→
P82
em71e
Select a
Deleting phonebook entries
・
When deleting all, all of the created groups are deleted.
・
The identical phonebook entries in PushTalk phonebook are also deleted.
・
For entries in UIM phonebook, "All contacts" cannot be performed.
<Example> Deleting a phonebook entry in FOMA terminal phonebook
de
1
2
✔
・
Search the phonebook
Place the cursor on a phonebook entry and
2e
"Yes"
・
When "All contacts" is selected, perform authentication.
Deleting from UIM phonebook : Place the cursor on a phonebook entry and
m4e
INFORMATION
Operation from the phonebook details screen : m→
"Yes"
m4e1
"Delete"
or
Setting functions for phonebook entries
・
These functions cannot be set for the phonebook entry in UIM phonebook.
◆
Setting Show/Hide caller ID to each phone number
<Caller ID settings>
・
This item is set to "No setting" by default.
・
Priority of the method to notify a caller ID→P50
de
1
✔
・
◆
When the other party registers a secret code for its mail address (mobile phone
number@docomo.ne.jp) and you set that secret code for the mail address in your
phonebook, the secret code is automatically added to i-mode mail created by
searching the phonebook for that phone number.
1
2
✔
・
・
Search the phonebookePlace the cursor on a phonebook
entry and
number
・
INFORMATION
Operation from FOMA terminal phonebook details screen : Display a phone number
and
m352e
e1-3
When "No setting" is set, the settings in Caller ID notification are used.
m→"Edit/Settings"→"Advanced settings"→"Caller ID settings"
AuthenticateeSelect a phone
Setting secret code to mail address <Secret code>
de
Search the phonebookePlace the cursor on a phonebook
entry
m354e
Enter the secret code of 4 digits
Canceling : Delete the secret code
INFORMATION
Operation from FOMA termina l phonebook details screen : Display a mail address and
The set secret code does not appear on the phonebook entry details screen or in the
address for creating i-mode mail. It can be checked by the same operations as secret
code settings.
AuthenticateeSelect the mail address
eg
Phonebook
89
F906i_E1kou
Blinking when secret attribute is set for the
phonebook entry at the cursor position
F906i.book Page 90 Monday, April 21, 2008 10:59 PM
・
If a mail address is saved as "mobile phone number + secret code@docomo.ne.jp",
sending mail to the party is unavailable.
Secret attribute
Making phonebook entries secret
You can set secrecy to phonebook entries or groups. In Privacy mode (when Call
& Logs is "Hide set contact"), the phonebook entries or groups with secrecy are
not displayed.
・
It is also reflected to PushTalk phonebook.
・
Setting for UIM phonebook is unavailable.
・
If you change secrecy, a confirmation screen appears for performing Apply
secret attribute when ending the phonebook and returning to the stand-by
display.
・
Operation setting of Privacy mode→P124
◆
Setting secret attribute for phonebook entries
de
1
✔
・
Search the phonebookePlace the cursor on a phonebook
entry and
Canceling : deSearch the phonebookePlace the cursor on a phonebook
Secret attribute is not set for phonebook entries in a group.
・
Secret attribute cannot be set for "
m
[Phonebook & Logs]
1
group and
・
Canceling : m [Phonebook & Logs]
No. of items
m8
When secret attribute is set for the group at the cursor position, blinks.
group and
m8
グループなし
12e
12e
(No group)".
Place the cursor on the
Place the cursor on the
Checking number of phonebook entries
・
In Privacy mode (when Call & Logs is "Hide set contact"), the number of
phonebook entries in FOMA terminal phonebook with secrecy is not displayed.
de
1
Quick dial
Search the phonebook
em92
Using simple dial to make calls
You can make calls or PushTalk calls by a simple operation to parties with
phonebook numbers 0-99 in FOMA terminal's phonebook.
・
When there are multiple phone numbers saved, a call is made to the first phone
number.
<Example> Making a voice call to the phone number saved as phonebook
1
→
number 2
Enter phonebook number (2)
・
When making a PushTalk call, press P.
en
or
C
Phonebook
90
F906i_E1kou
F906i.book Page 91 Monday, April 21, 2008 10:59 PM
Data Security Service
Storing (restoring or updating) phonebook in
Data Center
This service saves entries of FOMA terminal phonebook to Data Center. Stored
phonebook entries can be restored/updated to FOMA terminal by connecting to
Data Center.
・
A charged service requiring subscription. When having not subscribed to this
service, attempting to connect to Data Center displays the screen indicating that.
・
You can restore the phonebook, set auto-update, etc. on Data Security Service
site of i-mode.
→
English→My Menu
iMenu
・
For details of auto-update, restoration, etc., refer to "Mobile Phone User's Guide
[i-mode] FOMA version".
・
Entries saved in UIM phonebook cannot be saved in Data Center.
◆
Saving/Updating phonebook
m
[LifeKit]
1
・ g
Operating from FOMA terminal phonebook : deSearch the
phonebook
Check the communication result
2
・
The communication result display disappears after about 5 seconds.
✔
INFORMATION
・
If automatic update is performed after deleting entries of FOMA terminal phonebook,
the entries of phonebook saved in Data Center are also deleted.
・
If you deleted entries of FOMA terminal phonebook, you can download the
phonebook from Data Security Service site of i-mode.
iMenu
→
ター
(Data Center)→Enter i-mode password
(Download to phonebook/mobile phone)
・
When any other functions are running at the specified time of phonebook automatic
update, automatic update is executed after returning to stand-by display. Automatic
update is not executed when FOMA terminal is turned OFF or out of i-mode service
area or when UIM is not installed.
61e
: Cancel saving
em74e
English→My Menu
→電話帳お預かり
"Yes"eAuthenticate
"Yes"eAuthenticate
→電話帳お預かり
→電話帳・ケータイへダウンロード
→OK→
(Data Security Service)
(Data Security Service)
Return to stand-by display
→お預かりセン
・
When the automatic update of the phonebook failed, no icon etc. appears on the
stand-by display. You can check by Synchronization log.
・
The saved order of phonebook groups may not be reverted by restoration.
◆
Viewing logs that used Data Center <Synchronization
log>
・
Up to 30 synchronization logs are to be recorded. When exceeding the limit,
record is overwritten chronologically.
m
[LifeKit]
1
◆
Setting if you send the image saved in phonebook
62e
Select logs
<Sync setting>
m
[LifeKit]
e1
63e
or
2eC
1
field
Select the Contact image sending
Phonebook
91
F906i.book Page 92 Monday, April 21, 2008 10:59 PM
F906i_E1kou
F906i.book Page 93 Monday, April 21, 2008 10:59 PM
Sound/Screen/Light Settings
Setting operations for incoming calls and mail/messages .......................94
Sounds settings
Changing ring alert for calls, mail/messages, etc.
Changing font style ..................................................................... Font style 113
Changing font size ........................................................................ Font size 113
Setting clock display ................................................ Clock display format 114
Sent/Received/Retrieving mail image 106
Timed theme 101
Outgoing call image 104
Incoming call image 104
Identification mark 105
Contact image 106
93
F906i_E1kou
F906i.book Page 94 Monday, April 21, 2008 10:59 PM
Setting operations for incoming calls and mail/
messages
・
This setting is reflected to Call ring alert, Mail/Msg ring alert, Incoming call/
Videophone receiving of Call image, Vibrate alert/effect or Light alert.
◆
Changing operations for incoming call <Call alert/
Videophone alert>
<Example> Setting operations for incoming calls
m
[Settings & NW services]
1
items
eC
Changing operations for incoming videophone calls : m [Settings & NW
Ring alert :
Show image :
Vibrate alert :
Light alert :
◆
Changing operations for incoming PushTalk call
612e
services]
Set the ring alert.
・
When selecting any of "Melody", "Movie ringtone" or "Music", select the
ring alert. When setting a movie/i-motion with sound and image for
"Movie ringtone", Show image is "Sync ring alert".
Setting Music
・
When "Select image" is selected, select the List images field and select
an image.
・
When "i-motion" is selected, select a movie/i-motion from the movie list.
・
If setting Light alert to "Light pattern 1", "Light pattern 2" or "Sync
melody", the light blinks in multiple colors. Light color cannot be set.
→
P95
Set an image to display.
Set the operation pattern of vibrator.
Set a lighting pattern and color of the light.
<PushTalk alert>
m
[Settings & NW services]
1
items
eC
512e
Set the required items
621e
Set the required
eC
Set the required
Ring alert :
Vibrate alert/Light alert :
◆
Changing operations for incoming MessageR/F
Set the ring alert.
・
When selecting any of "Melody", "Movie ringtone" or "Music", select the
ring alert. For "Movie ringtone", movie/i-motion containing only sound
(i-motion without image such as the one containing only voice of a
singer) can be set.
Setting Music
incoming call"
→
P95
Setting items→P94 "Changing operations for
<MessageR/F alert>
a#1e2
1
Ring alert :
Light alert/Vibrate alert :
Ring time (sec) :
◆
Changing operations for incoming mail <Mail alert>
a#11e
1
Setting items→P94 "Changing operations for incoming MessageR/F"
◆
Changing operations for incoming chat mail <Chat
Set the ring alert.
・
When selecting any of "Melody", "Movie ringtone" or "Music", select the
ring alert.
Setting Music
incoming call"
vibrator within the range of 1-30 seconds.
or
3e
Set the required items
→
P95
Setting items→P94 "Changing operations for
Set the duration of sounding of ring alert or operation of
Set the required items
eC
eC
mail alert>
a#14e
1
Alert setting :
incoming operation.
・
Setting "Customize" allows setting the items below.
Ring alert/Light alert/Vibrate alert/Ring time (sec) :
Setting items→P94 "Changing operations for incoming MessageR/F"
Set the required items
Set if you set operations for incoming mail or follow the
eC
Sound/Screen/Light Settings
94
F906i_E1kou
F906i.book Page 95 Monday, April 21, 2008 10:59 PM
✔
INFORMATION
・
Setting created animation for Select image of Show image in Call alert (Incoming call)
or Videophone alert (Videophone receiving) displays the first image.
・
When music or movie/i-motion containing only sound (i-motion without image such
as the one containing only voice of a singer) is set as the ring alert in Call alert or
Videophone alert, if you set Show image to movie/i-motion containing only images
or Flash graphics, the ring alert is reset to the default. The melody can be changed.
・
Some movies/i-motion may not be set for Show image of Call alert (Incoming call) or
Videophone alert (Videophone receiving). Also, movies/i-motion with sound cannot
be set.
・
Even when setting Vibrate alert or Light alert to "Sync melody", the vibrator/light may
not be synchronized depending on the melody.
Sounds settings
Call ring alert/Mail/Msg ring alert
Changing ring alert for calls, mail/messages, etc.
・
When a movie/i-motion is set as a ring tone, a movie and/or sound is played for
incoming phone call or mail (Movie ringtone).
・
This setting is reflected to ring alert in Call alert, Videophone alert, PushTalk
alert, Mail alert, MessageR alert, MessageF alert and Chat mail alert.
・
Melodies for ring alert stored by default→P429
<Example> Setting ring alert for incoming mail
m
[Settings & NW services]
1
21
2
Setting ring alert for incoming voice/videophone/PushTalk call :
1e1-3
Setting ring alert and Ring time (sec) for incoming chat mail or MessageR/F :
2e2-4
Set the required items
3
Mail*1 :
Select a ring alert.
・
When selecting any of "Melody", "Movie ringtone" or "Music", select the
ring alert.
Setting Music
・
For Chat M ring alert, "Sync msg alert" can be selected. If you select "Sync
msg alert", the ring alert operates according to Mail alert. Ring time cannot
be set.
→
P95
11
eC
Ring time (sec)*2 :
*1
Function names selected in Step 2 are displayed.
*2
Voice call, videophone call or PushTalk call are not displaye d.
❖
Setting Music
Music (Chaku-uta full®) can be set as a ring alert in two ways : Full song ring tone
for setting whole music and Point ring tone for setting a section previously
selected.
<Example> Setting Full song ring tone
Select "Music" at each settingeSelect a folder
1
Select a music to set
2
・
When music in microSD card is selected, a confirmation screen appears.
Select "Yes" to move the music to the terminal and set to a ring alert.
Setting Point ring tone : Place the cursor on the data to set and aeSelect
the item
・
When Chaku-uta full® in microSD card available to nonmember is selected,
a confirmation screen for cutting out the part to set as the ring alert and
saving it in the i-motion folder appears. Select "Yes", enter a display name
and press
i-motion compatible with contents transfer.
When exceeding the savable number/area
✔
INFORMATION
・
The data below cannot be set as the ring alert.
- Movie/i-motion containing only image
- Movie/i-motion for which Ring alert in detail information (
- Music for which Full song ring tone or Point ring tone of detail information (
"Unavailable"
・
In the cases below, the image for incoming call is used as the standard image in the
settings of Call ring alert and V.phone ring alert. The image can be changed in Call
alert (Incoming call) or Videophone alert (Videophone receiving).
- When the ring alert is changed from a movie/i-motion containing images to music or movie/imotion containing only sound (i -m ot ion without image such as the one cont aini ng o nl y vo ic e of a
singer) or melody
- When a movie/i-motion containing only imag es or Flash grap hics is set as the incom ing image and
a movie/i-motion containing only sound (i-motion without image such as the one containing only
voice of a singer) is set as the ring alert
Set time in range of 1-30 seconds.
C
. The cut out music is saved to "i-mode" folder of i-motion as
→
P322
→
P319) is "Unavailable"
Sound/Screen/Light Settings
→
P348) is
95
F906i_E1kou
F906i.book Page 96 Monday, April 21, 2008 10:59 PM
❖
Ring alert priority
When setting ring alerts for multiple functions, they sound in order of the priority
below.
a
Alert by contact of FOMA terminal phonebook
b
Alert/image by group of FOMA terminal phonebook
c
Call ring alert/V.phone ring alert/Mail ring alert/Call alert (Incoming call)/
Videophone alert (Videophone receiving)/Mail alert/Incoming calls melody
setting for Multi number/Ring alert for No. B
・
When the other party does not notify the caller ID, the ring alert for voice call
depends on Anonymous caller. A ring alert for videophone call depends on the
settings of V.phone ring alert/Videophone alert/Ring alert for No. B.
Stereo sound effect
Setting Stereo/3D sound or Surround
・
This setting is also reflected to Surround of Settings for movie/i-motion and
Music player, and Stereo/3D sound of Settings for Melody.
m
[Settings & NW services]
1
2
✔
INFORMATION
・
The 3D sound function creates sound that is 3-dimensional or moves around in space
using stereo speakers (or stereo earphone set). Using the 3D sound function, realistic
i-
α
ppli games, ring ton e and i-motion can be enjoyed. The most realistic 3D sound can
be enjoyed when FOMA terminal is held approximately 20-30 cm away from the
listener's face. The effect fades when FOMA terminal is positioned off the center
rightward or leftward or too close or too far.
・
There are differences in how the 3D sound effect is felt among individuals.
Alarm sound
16e1-3e1
or
Setting alarm sound for Alarm clock and
Schedule reminder
<Example> Setting Alarm clock sound
m
[Settings & NW services]
1
114
1e
2
3
Adjust volume
Select the Alarm clock field
・
When selecting any of "Melody", "i-motion" or "Music", set the alert sound.
When movie/i-motion containing sound and image is set for "i-motion", the
image of the movie/i-motion is displayed.
Setting Music
Setting sound for Schedule reminder :
or Alarm in advance field
→
P95
e1-3
C
e1-4
2e
Select the Alarm on time field
Setting volume of various sounds such as ring
alert and alarm sound
m
[Settings & NW services]
1
・
When Alarm volume is selected, select 1 or 2.
Call alert volume :
calls. It is also reflected to alarm volume of Call cost limit.
Mail/Msg alert vol. :
MessageR/F.
GPS alert volume :
request, Notify location).
Listen volume :
PushTalk call. Reflected to the volume of play sound of Answer machine or
Voice memos and sound effect of pasting stamp or text to an image.
Alarm clock sound :
"Phone setting" from the Set sound screen of Alarm clock. Also reflected to
the volume of Countdown timer.
Schedule reminder :
1Seg, alarm on time or alarm in advance for the schedule.
i-αppli effect sound :
ToruCa receive alert :
ToruCa has completed. Also reflected to Receive alert volume of ToruCa
alert.
Set call alert volume for voice, videophone and PushTalk
Set volume of a ring alert for mail, chat mail and
Set volume of GPS alert sound (Position location, Location
Set earpiece volume of voice call, videophone call and
Set volume of sound to be emitted when Volume is set to
Set sound volume of alarm for watching reservation of
Set volume of the sound emitted from i-αppli.
Set the volume of the alert activated when receiving
12e1-9
Sound/Screen/Light Settings
96
F906i_E1kou
F906i.book Page 97 Monday, April 21, 2008 10:59 PM
Operation sound :
Display turn sound.
・
If setting to "Silent", the confirmation sound is not emitted when the code
is read.
Melody effect sound :
attached to mail or MessageR/F). Also reflected to the volume of Settings
of Melody.
・
"Silent" and "Steptone" cannot be set for Listen volume. "Steptone" cannot
be set for iMelody effect sound.
Side keys [▲▼] or
2
・
If setting Call alert volume to "Silent", appears on the stand-by display.
appears when a vibrate for Call vibrate alert is set simultaneously.
Vibrate alert/effect
Set the volume of Keypad sound, Open/Close sound and
Set the volume for playing melody (including melody
α
ppli effect sound, ToruCa receive alert, Operation sound or
keg
Using vibrator to signal incoming calls and
alarms
・
The operation of vibrator for receiving 64K data communication depends on the
setting of incoming voice call.
・
This setting is also reflected to settings for Vibrate alert or Vibrate effect in Call
alert, Videophone alert, PushTalk alert, Mail alert, MessageR alert, MessageF
alert, Chat mail alert, Positioning alert and i-
・
If FOMA terminal is on the desk etc. when the vibrator operates, it may fall off
because of the vibration.
<Example> Setting the vibrator for incoming voice, videophone and PushTalk
1
calls
m
[Settings & NW services]
α
ppli settings.
13
1e1-3
2
Setting the vibrator for incoming mail, chat mail and MessageR/F :
2e1-4
・
When Alert setting of Chat mail alert is set to "Same:Mail setting", a screen
appears indicating that setting is unavailable.
Setting the vibrator for GPS positioning :
Setting the vibrator used with Alarm clock or Schedule reminder sounding :
4e1
Setting the vibrator used for i-αppli effect : Press
1-5
3
Vibrator is set and FOMA terminal vibrates on the incoming call/message and
alarm notification.
・
If you place the cursor on "Pattern A", "Pattern B" or "Pattern C", it vibrates
in the pattern at the cursor position.
・
When setting to "Sync melody", the vibrator operates along with the
melody set for ring alert etc. Note that it may not synchronize depending
on the melody.
・
When setting the vibrator for i-αppli effect, select "ON" or "OFF".
・
If the vibrator for incoming calls is set, appears on the stand-by display
if the Call alert volume is more then "Level 1". appears when Call alert
volume is set to "Silent".
❖
Vibrate alert priority
When setting vibrator in multiple functions, it operates in order of the priority
below.
Vibrator does not operate when another call is received during a call.
・
Even with "OFF", the vibrator may operate when Flash graphics operate.
or
2
3e1-4
5
Sound/Screen/Light Settings
97
F906i_E1kou
F906i.book Page 98 Monday, April 21, 2008 10:59 PM
Melody Call
Changing the ring tone of the phone
This is a service to change the sound like "prr" that you hear when making a call
to a mobile phone to a melody.
・
A communication fee is not required for connecting to the setting site. Note that
you are charged packet communication fees for connecting to IP site, i-mode
menu site or Free Melody Corner.
m
[Settings & NW services]
1
The melody call site is connected.
・
For details, refer to "Mobile Phone User's Guide [Network Services]".
✔
INFORMATION
・
Melody Call is valid only when a voice call is received.
GPS alert
118e
"YES"
Setting sound for GPS positioning
・
This setting is also reflected to Position settings, Notification setting and
Positioning alert for Request setting.
m
[Settings & NW services]
1
4e
Select the Ring alert field
・
When "Melody" is selected, select ring alert.
C
2
Keypad sound
113e1
e1
or
2
-
Setting Keypad sound
You can change the sound to be emitted when pressing keys (except side keys [
▲▼
], M or P) or when operating pointing device. Emission of the sound can also
be inhibited.
・
When the sound of Battery level and End alert of Data exchange settings are set
to "ON", sounds are emitted according to these settings.
・
If setting to "OFF", the sound is not emitted when reading a code.
m
[Settings & NW services]
1
✔
INFORMATION
・
Keypad sound is not emitted in the cases below even if it is set to ON.
- When i-αppli is activated (except s)
- When Full Browser is activated, or when the pointer is moved by sliding the pointing device
・
If setting keypad sound to "Sol-fa", "Key sound 2" is emitted by sliding the pointing
device and the dedicated sound is emitted by double-tapping.
Open/Close sound
1151e1-5
Setting Open/Close sound
You can change the sound to be emitted when opening/closing FOMA terminal.
m
[Settings & NW services]
1
Display turn sound
1152e1-4
Setting sound to be emitted when turning
display
m
[Settings & NW services]
1
Turn sound field
・
When "Melody" is selected, select turn sound.
C
2
Shutter sound/Movie camera sound
e1
1153e
or
2
Select the
Setting shutter sound
You can set a shutter sound to be emitted when shooting an image with Still
camera or recording a movie with Movie camera (including recording sound with
Sound recorder).
・
This setting is also reflected to Shutter sound of Image settings and Recording
settings.
m
[Settings & NW services]
1
5e1-5
115e4
or
Sound/Screen/Light Settings
98
F906i_E1kou
F906i.book Page 99 Monday, April 21, 2008 10:59 PM
Charge alert
Setting alert sound for charging
You can set if you activate the battery charged sound at the start and end of
charging.
m
[Settings & NW services]
1
✔
INFORMATION
・
The alert sound for charging is not emitted in the situations below even when this
function is set to "ON".
- In Silent mode, Public mode (Drive mode), during a vo ice/videoph one call, PushTalk session, 64K
data communication, i-mode communication, packet communication
On-hold tone
116e1
or
2
Setting on-hold tone
m
[Settings & NW services]
1
Quality alarm
1172e1-3
Alarm announcing that call is about to be
interrupted
You can set if you sound an alarm before the voice call is disconnected when
signal quality deteriorates.
・
If the signal quality deteriorates rapidly, the call may be disconnected without
sounding the alarm.
m
[Settings & NW services]
1
✔
INFORMATION
・
To make settings during a voice call, press m and select "Quality alarm".
Reconnect alarm
1173e1-3
Setting alarm for reconnecting interrupted call
・
While the call is interrupted, the distant party hears no sound.
・
The time required to make a reconnection depends on the call conditions, radio
wave conditions, etc. It normally takes about 10 seconds to reconnect.
・
You are charged for the time used to make a reconnection (up to 10 seconds).
・
The call may be terminated without sounding the alarm depending on the call
conditions, signal quality, etc.
m
[Settings & NW services]
1
✔
INFORMATION
・
To make settings during a voice or PushTalk session, press m and select "Reconnect
alarm".
Low Battery alert
1174e1-3
Setting Low Battery alert
You can set if you activate the alert when the battery is low.
m
[Settings & NW services]
1
✔
INFORMATION
・
When the battery becomes low during a call, the alert is emitted from the earpiece
even with "OFF" set.
Silent mode
1175e1
or
2
Making FOMA terminal silent
Sounds from FOMA terminal can be disabled in order to prevent disturbance to
the people around you by enabling the vibrator for incoming calls or muting the
keypad sound.
◆
Starting Silent mode
#
(1 sec. or more)
1
After Silent mode specified in Silent mode is activated, (in General silent
mode) or (in Personalized silent mode) is displayed on the stand-by
display.
・
By default, you can also start/cancel Silent mode by pressing side key [▲]
for 1 second or more with FOMA terminal folded.
Sound/Screen/Light Settings
99
F906i_E1kou
F906i.book Page 100 Monday, April 21, 2008 10:59 PM
・
When FOMA terminal is folded, Silent mode can be started/canceled by
using a menu on the sub-display.
Canceling : # (1 sec. or more)
❖
When General silent mode is activated
An incoming call is notified with vibration, muting all sounds emitted from FOMA
terminal such as ring tone, Keypad sound, Open/Close sound, Display turn sound,
alarm, buzzer or the sound for reading a code. And, microphone is sensitized, and
a call can be made in a small voice.
・
In the cases below, the operation of vibrate alert is "Pattern A".
- When receiving voice call, videophone call, PushTalk cal l, mail or during 64K data
communication
- Positioning when melody is set in GPS alert
- When the time specified in Countdown timer elapses
- When the date and time specified in schedule come
・
The vibrator operation for receiving Area Mail of emergency earthquake flash
report is "Sync melody".
・
When the time specified in Alarm clock comes, vibrate operates according to the
setting of Alarm clock.
・
Melody is not played automatically even when sent/received mail or MessageR/
F is displayed with "Auto play" set for Attachment auto-play.
・
When playing a movie/i-motion with sound, program recorded from 1Seg, a
confirmation screen for sound playing appears. Select "No" to play movie only.
・
When activating 1Seg, a sound emission confirmation screen appears. If you
select "Yes", you can adjust the volume. Select "No" to inhibit sound output.
When 1Seg is activated with Use as alarm in watching reservation set to "Yes",
you can adjust the volume.
・
When playing Music or Melody or Music&Video Channel program in Silent
mode, the playing confirmation screen appears. Select "Yes" to play.
✔
INFORMATION
・
Shutter sound is emitted even in Silent mode.
・
The alarm sound of Call cost limit is not usually emitted in Silent mode. In
Personalized silent mode, alarm volume of Call cost limit depends on the setting of
"Call alert volume" of the Personalized silent mode.
Set the vibrate alert while incoming or receiving.
When setting to "ON", it operates according to Vibrate alert/effect. Note
that, when Vibrate alert/effect is set to "OFF", it vibrates in "Pattern A".
When setting to "Contact setting", it operates according to Vibrate alert/
effect.
Regardless of this setting, when receiving Area Mail of emergency
earthquake flash report, the vibrator operates in "Sync melody".
Set keypad sound.
Set Open/Close sound.
Set if you emit a sound when rotating the display.
Set call alert volume for voice, videophone and PushTalk
Set mail alert volume.
Even if "Silent" is set, if any other setting item is set to emit sound, the
buzzer sounds when receiving Area Mail of emergency earthquake flash
report.
Set the volume for playing melody (including melody
Set the volume of a confirmation sound for obtaining
Set volume of GPS alert sound (Position location, Notify
Set if you activate the alarm when the battery becomes
When setting Alarm sound to "ON", the Countdown timer sound is also
emitted.
Set if you emit fake call sound.
Set if you increase the microphone sensitivity.
14
1
eC
When setting to "ON", the
F906i_E1kou
F906i.book Page 101 Monday, April 21, 2008 10:59 PM
Answer machine :
of Answer machine.
Displays/Lights settings
Timed theme
Operates according to this setting regardless of the setting
Switching stand-by display, Silent mode, etc. by
lifestyles
This function allows you to change the stand-by display or activate Silent or
Privacy mode at the specified time. You can select the alarm to sound once only,
repeat everyday or sound on the same day every week.
・
Up to 18 items can be added.
m
[Settings & NW services]
1
is displayed at the left of the title for Timed theme set to ON.
Setting/Canceling the timed theme : Place the cursor on the title and
Set the required items
2
Time :
Enter the time to switch the theme in the 24-hour format.
Repeat :
Set action of repeat switching.
・
When "Day of week" is selected, select "Day/Week", select a day of week
C
and press
Title :
Up to 10 two-byte (20 one-byte) characters can be entered.
Style theme :
・
When "Change" is selected, select a style theme.
Silent mode :
・
When "ON" is set, Silent mode set from Silent mode starts.
Privacy mode :
・
When "ON" is set, Privacy mode set from Privacy mode setting starts.
✔
INFORMATION
・
With Style theme set to "Change", the image, movie/i-motion, Chara-den and Set
random image settings on the stand-by display are canceled at the time specified in
this function. However, Show ticker of i-Channel is not canceled.
・
When i-αppli stand-by display is set, this function is unavailable.
・
If multiple items are set and the operating time for them are the same, the item on the
top of the list of Timed theme operates.
・
When Timed theme and alarm are set to start at the same time, Timed theme starts
after the alarm operates.
.
Set if you change style theme.
Set if you start Silent mode.
Set if you start Privacy mode.
eC
33e
Select the title
m
・
This function does not operate if FOMA terminal is turned OFF, All lock or Omakase
Lock is ON or other function is operating when the specified time comes. If you turn
FOMA terminal ON, cancel the lock or display the stand-by display, Timed theme that
passed the set time operates in order.
Stand-by display
Changing stand-by display
・
Stand-by display for some of images, movies/i-motion, Chara-den or i-αppli are
unavailable if you do not install the same UIM as used in downloading the data
(UIM operation restriction).
・
If a data in "Preinstalled" folder is set, the set stand-by display is displayed even
in Personal data lock.
◆
Setting image/movie/i-motion/Chara-den as stand-by
display
Image, movie/i-motion or Chara-den downloaded from an i-mode site or still
image or movie shot with FOMA terminal can be set as the stand-by display. GIF
Animation, created animation or Flash graphics can also be set.
・
Still image, GIF animation, created animation or Flash graphics can be set on
Horizontal display.
・
Images and movies/i-motion saved in microSD card cannot be selected.
・
Movie/i-motion that can be set for stand-by display→P302
m
[Settings & NW services]
1
1
2
Setting horizontal display stand-by display :
Select any of 1, 3, 4,
3
Selecting horizontal display : 1 or
211
2
6
2
Sound/Screen/Light Settings
101
F906i_E1kou
F906i.book Page 102 Monday, April 21, 2008 10:59 PM
Select a foldereSelect an image, movie/i-motion or Chara-den
4
Setting action of Chara-den : Place the cursor on the Chara-den to set and
me
On the Stand-by settings screen, set the required items
Setting items→P305 Step a in "Setting to the stand-by display"
"Yes"
5
・
When setting movie/i-motion as the stand-by display, the first image is
displayed.
・
If the selected image, movie/i-motion or Chara-den can be zoomed, a
confirmation screen appears asking if you display at the same
magnification or zoom. Select "Yes (Same size)" to maintain the image size
or select "Yes (Large size)" to enlarge the image to the screen size to display
on the stand-by display.
・
If i-αppli stand-by display has been set, a confirmation screen appears
asking if you terminate the i-
α
ppli stand-by display is terminated.
the i-
・
When Show ticker of i-Channel ticker is set to "Yes" and movie/i-motion or
Chara-den is selected, the ticker display is canceled.
・
When the movie/i-motion or Chara-den is canceled with no i-αppli stand-by
display set, Show ticker of i-Channel ticker is set to "Yes".
❖
To play movie/i-motion, animation or Chara-den set as the
α
ppli stand-by display. When selecting "Yes",
eC
stand-by display
・
The operations below are available for movie/i-motion.
f
/Opening FOMA terminal : Play
c/f
: Stop
Side keys [
・
The operations below are available for GIF animation, created animation or
Flash graphics.
Opening FOMA terminal/Turning the display/Returning to the stand-by display/
f
・
The operations below are available for Chara-den.
c
c/f
▲▼
] : Adjust volume
Turning power on : Play
: Pause/Play
/Opening FOMA terminal : Play
: Stop
✔
INFORMATION
・
When the stand-by display is displayed, Flash graphics and/or GIF animation plays for
a predetermined period of time and stops.
・
If zoom display is set for GIF animation, the display may be distorted.
・
If setting Flash graphics in "Preinstalled" folder of My Picture, the images change as
shown below.
- When setting
displayed, and the images change according to the number of steps. When tilting FOMA terminal,
human-shaped icon moves. For the case of "Not use", the images change according to the battery
level.
- When setting
season or time. And, when Pedometer settings is "Use", the number of steps is displayed, and the
images change according to the number of steps. For the case of "Not use", the time is displayed.
- When setting
steps is displayed.
- When setting
butterflies changes. And, when Pedometer settings is "Use", the number of steps is displayed.
- When setting
the season or time.
- When setting
season and time. And, when Pedometer settings is "Use", the number of steps is displayed, and the
images change according to the number of steps.
◆
Displaying images at random <Set random image>
You can display multiple still images saved in folders in My Picture on the standby display (Vertical display) switching at random at the specified timings.
・
Only JPEG/GIF format images (except for GIF animation) can be displayed.
1
ホワイト1/
ミラーブラック1/
ミラーレッド1/
ゴールド1/
アドバンストモード1/
ウォーキング×フラワー
m
[Settings & NW services]
2 (White 1/2), if Pedometer setting is "Use", the number of steps is
2 (Mirror Black 1/2), the images change according to the
2 (Mirror red 1/2), if Pedometer settings is "Use", the number of
2 (Gold 1/2), if tilting or shaking FOMA terminal, the movement of the
2 (Advanced mode 1/2), the images change according to
(walking×flower), images change according to the
21112e
required items
Folder :
Select the folder containing the images.
Change image :
・
When "Every 30 mins" is selected, the image is changed at minutes 00
and 30 every hour, and when "Every 60 mins" is selected, the image is
changed at minutes 00 every hour.
Set the timing for changing images.
Set the
Sound/Screen/Light Settings
102
F906i_E1kou
F906i.book Page 103 Monday, April 21, 2008 10:59 PM
Ce
2
✔
・
◆
・
・
・
1
2
◆
You can divide the stand-by display to several and make settings to display newly
arrived information such as unread mail or missed call, schedule, calendar, list of
notes or contents of a note in individual areas.
・
1
"Yes"
・
If i-αppli stand-by display has been set, a confirmation screen appears
asking if you terminate the i-
α
ppli stand-by display is terminated.
the i-
INFORMATION
When no still image can be displayed because some specified folders are deleted or
still images saved in the folder have been moved/deleted or Create animation is
made, the image set by default appears on the stand-by display and random image
setting returns to the default. However, when the still image displayed on the standby display is moved or used for Create animation, the image is temporarily displayed
until next time the image is changed.
α
ppli stand-by display. When selecting "Yes",
Setting i-αppli stand-by display
Only i-αppli compatible with the i-αppli stand-by display can be set.
The i-αppli stand-by display takes precedence over other stand-by display
settings.
Canceling operation, setting and stand-by display of i-αppli→P238
m
[Settings & NW services]
A list of i-αppli compatible with the i-αppli stand-by display is displayed.
Select i-αpplie"Yes"
or is displayed when the i-αppli stand-by display is set.
・
When Show ticker of i-Channel ticker is "Yes", Show ticker is canceled.
・
With no movie/i-motion or Chara-den set on the stand-by display, if i-αppli
stand-by display is canceled, Show ticker of i-Channel ticker is set to "Yes".
When the stand-by display has an image set, the set information is displayed
overlaid on the image. It is not displayed if movie/i-motion, Chara-den or istand-by display is set on the stand-by display.
m
[Settings & NW services]
215
α
ppli
1
2
Canceling :
h
3
・
Setting newly arrived information :
・
・
・
・
Setting Calendar :
・
Setting Note content :
Ce
4
❖
Checking information on the stand-by display
g
1
The area is surrounded with a red cursor frame.
・
Move the cursor with
2
✔
INFORMATION
・
Pressing f switches hide and display of the information.
・
If you set a GIF animation, created animation or Flash graphics in Set image of Image/
i-
α
ppli, the information is displayed by pressing f after the playing is stopped or
paused.
2
to switch patternseSelect an area
Press m and select "Yes" to cancel all area settings.
"When selecting " Unread messages", reception date/time and titles of
unread mails appear.
When selecting " MessageR"/" MessageF", reception date/time and
titles of MessageR/F appear.
When selecting " Missed call", reception date/time and the phone
number of the caller (or name if saved in phonebook) appear.
When selecting " Recorded messages", recording date/time and the
phone number of the caller (or name if saved in phonebook) appear.
The number of months that calendar can be displayed varies by the area
size.
"Yes"
When no information is shown, press f repeatedly and display it before
pressing
4e1-4
g
.
6e
keg
Select a note
e1-6
2e
Select information
eC
Sound/Screen/Light Settings
103
F906i_E1kou
F906i.book Page 104 Monday, April 21, 2008 10:59 PM
❖
Displayed contents of various information
Each information set in Info/calendar layout appears as follows.
・
Since the numbers of information entries and lines displayed differ by the area
size, some part of the information may not be displayed.
・
For each information entry, the time is displayed for the current day and the date
is displayed for others.
■
New arrival
The information is displayed from the latest one. Select an area to check the top
information.
: Unread mail / : MessageR/MessageF
: Missed call : Recorded message
■
Schedule
Icon, Start time, contents/program name appear in the order of the date and time
of schedule or watching reservation/recording reservation of 1Seg that start date/
time have not come yet. If an area is selected, the schedule or watching
reservation/recording reservation of the first item can be checked.
・
When the date of Start time and End time are not the same, the icon to be
displayed is .
・
If the schedule with All day set to ON is the current day, "AllDay" is displayed.
■
Calendar
The calendar for 1 month/2 months/4 months/6 months are displayed. Select an
area to display the Calendar of Scheduler.
・
The current day is displayed in yellow, days off and holidays in red and
Saturdays in blue. The color changes by Days off, Day off of week and Holiday
settings of Scheduler.
・
When a schedule or 1Seg watching reservation/recording reservation is set, a
red mark appears on the upper-right side of the date.
■
List of notes
The list of notes saved in Notepad is displayed. Select an area to display the list of
notes.
■
Note
The beginning of a note set in Notepad is displayed. Select an area to display the
details of a note.
✔
INFORMATION
・
In Personal data lock, only the setting of Missed calls for New arrival can be changed.
Also, Schedule, List of notes or Note cannot be selected.
Outgoing call image
Changing images for outgoing voice/videophone calls
<Example> For voice call
m
[Settings & NW services]
1
Display image field
Changing image displayed when making a videophone call : m [Settings &
NW services]
3
・
When "Select image" is selected, select Image list field and select an image.
C
2
✔
INFORMATION
・
Setting created animation for "Select image" displays the first image.
❖
Outgoing call image priority
When setting outgoing images in multiple functions, they are displayed in order of
the priority below.
Changing images for incoming voice/
videophone calls
・
This setting is also reflected to Call alert of Call & Answer or Videophone alert
of Videophone.
-
Sound/Screen/Light Settings
104
F906i_E1kou
F906i.book Page 105 Monday, April 21, 2008 10:59 PM
<Example> For voice call
m
[Settings & NW services]
1
image field
Changing image displayed when receiving a videophone call : m [Settings
・
・
・
C
2
✔
INFORMATION
・
Setting created animation for "Select image" displays the first image.
・
When movie/i-motion containing only sound (i-motion without image such as voice
of a singer) is set as the ring alert, if you reset Show image to movie/i-motion
containing only images or Flash graphics, "
(Harp)" (videophone call) is set as the ring alert. The melody can be changed.
・
Some movies/i-motion may not be set to Show image. Also, movies/i-motion with
sound cannot be set.
❖
Incoming call image priority
When setting incoming images in multiple functions, they are displayed in order
of the priority below.
a
Image saved in FOMA terminal phonebook
b
Alert/image by group of FOMA terminal phonebook
c
Call ring alert*2/V.phone ring alert*2/Call alert (Incoming call)/Videophone alert
(Videophone receiving)/Incoming calls melody setting for Multi number/Ring
alert for No. B
*1
Effective when Contact image is set to "ON".
*2
If setting to "Movie ringtone", effective when movie/i-motion containing sound and image
is set.
・
When the other party does not notify the caller ID, the incoming image for voice
call depends on Anonymous caller. An incoming image for videophone call
depends on the settings of Videophone alert.
e1-5
& NW services]
5
When "Select image" is selected, select the Image list field and select an
image.
When "i-motion" is selected, select a movie/i-motion from the movie list.
When movie/i-motion containing sound and images is set for Call ring alert
or V.phone ring alert, "Sync ring alert" is set.
2324e
*2
2322e
Select Show image field
着信音
1 (Tone1)" (voice call) or "
*1
Select Show
e1
ハープ
・
When setting movie/i-motion (including the case of setting to "Terminal setting"
and setting movie/i-motion for Incoming call) for the ring alert of Alert by
contact of FOMA terminal phonebook, the image or movie/i-motion set in
phonebook does not appear, and the movie/i-motion set for the ring alert
-
appears. Note that, when setting movie/i-motion containing only sound (imotion without image such as voice of a singer) in Call alert etc., it operates as
below.
- When setting a still image to phonebook, the still image is displayed.
- When Flash graphics or movie/i-motion is set to phone book, the image of the phonebook
does not appear, but the image set for Alert/Image by group or Call alert appears.
・
When setting ring alert to "Terminal setting" in Alert/image by group of
phonebook and setting movie/i-motion in Call alert etc., the image or movie/imotion set in phonebook by group does not appear, and the movie/i-motion set
for Ring alert appears. Note that, when setting movie/i-motion containing only
sound (i-motion without image such as voice of a singer) in Call alert etc., it
operates as below.
- When a still image is set for Alert/Image by group, the still image appears.
- When Flash graphics or movie/i-motion is set for Alert/Image by group, the image set for
Call alert etc. appears.
Identification mark
Decorating titles to display for incoming/
outgoing calls or while talking
・
This setting is reflected to Number A of Identification mark of 2in1.
m
[Settings & NW services]
1
items
eC
・
When setting Identify No. to "ON", Mark can be set.
✔
INFORMATION
・
The mark does not appear in the cases below.
- When receiving while using Multi number
- When calling by specifying Multi number from submenu
513e
Set the required
Sound/Screen/Light Settings
105
F906i_E1kou
F906i.book Page 106 Monday, April 21, 2008 10:59 PM
Contact image
Setting Contact image display from phonebook
at incoming/outgoing call
You can set if you display the image saved in FOMA terminal phonebook for
incoming/outgoing voice calls/videophone calls.
・
The image saved in phonebook is displayed when the recorded person calls
with the caller ID.
m
[Settings & NW services]
1
Sent/Received/Retrieving mail image
2325e1
or
2
Changing displays for incoming/outgoing
messages and retrieving
You can set images to appear when sending mails, receiving mails (including
MessageR/F) or received mails, or checking new messages.
m
[Settings & NW services]
1
Select the Display image field
2
・
When "Select image" is selected, select Image list field and select an image.
Setting Image message alert : Select the Display image field
・
When "i-motion" is selected, select a movie/i-motion from the movie list.
・
When movie/i-motion containing sound and images is set for Mail ring
alert, "Sync ring alert" is set.
C
3
Sub-display
233e1-4
e1-3
e1-5
Setting sub-display
◆
Setting an image to display on sub-display <Clock &
alert image>
An image is set on the sub-display for incoming calls or incoming mail. Display of
the clock can be set.
m
[Settings & NW services]
1
items
eC
Clock style :
Alert image :
Incoming mail img :
◆
Setting the light of sub-display <Sub-display light>
You can set the sub-display light to turn on when there is an incoming call or mail,
switching display of sub-display, o perating camera/movie camera/sound recorder,
folding FOMA terminal, etc.
m
1
Display & Key light
Set display of the clock.
Set the image to display on the sub-display for incoming voice
and videophone calls.
Set the image to display in the sub-display at the time of
mail arrival.
[Settings & NW services]
281e
282e1-7
Set the required
Setting display and key lighting
◆
Setting lighting time <Display light time>
You can set the lighting time of display. When the light is ON, the display becomes
brighter and Keypad light turns on.
・
In addition to Normal use, lighting time can be set also for AC adapter connected
(including DC adapter), i-mode session, Camera session, Movie camera session,
i-motion and i-
・
This setting is also reflected to Display light of i-mode settings, Still image
settings, Recording settings, Settings for i-motion and Display light of isettings, respectively. And, i-motion settings are also reflected to the light
settings of Music&Video Channel.
<Example> Setting lighting time for Normal use
m
1
α
ppli.
[Settings & NW services]
241
α
ppli
Sound/Screen/Light Settings
106
F906i_E1kou
F906i.book Page 107 Monday, April 21, 2008 10:59 PM
1e1-7
2
・
When set to "Always", the light always turns on with brightness set in
Brightness and power saving does not operate.
Setting lighting time for AC adapter connected, i-mode session, Camera
session, Movie camera session, i-motion or i-
2
・
When setting to "Terminal setting", the light is lit according to the lighting
time set in Normal use.
・
When setting to "Always on", the light always turns on with brightness set
in Brightness and Power saved mode does not operate. However, while an
AC adapter is connected, the light is lit in "Brightness 5" regardless of the
settings in Brightness.
・
When setting to "Software" for i-αppli, the light is lit according to the i-αppli
settings. Power saved mode does not operate for ialways ON.
◆
Setting brightness of light <Brightness>
m
[Settings & NW services]
1
・
When setting to "Auto adjust", the brightness of the display lights is
automatically adjusted according to the ambient light. In a well-lighted
area, Keypad light does not turn on.
◆
Setting key lighting <Keypad light>
m
[Settings & NW services]
1
items
eC
Keypad light :
FOMA terminal or rotating the display.
・
Light color :
each time you press a key. When setting to "Rainbow (Open/Close)", the
light color changes each time FOMA terminal is opened.
When setting to "ON", Keypad light turns on when opening
When setting to "OFF", Keypad light does not turn on regardless of the
settings of Display light time or Brightness.
When setting to "Rainbow (Key press)", the light color changes
242e1-6
243e
α
ppli : 2-
7e1
α
ppli that holds lighting
Set the required
or
Call/Mail light alert :
operates according to Light alert. When setting to "OFF", Keypad light for
an incoming call operates according to the setting of Keypad light color.
・
When Light pattern of Light alert is "Light pattern 1", it operates in "Kiwi",
and when "Light pattern 2", it operates in Rainbow (Key press). When
setting to "OFF", Keypad light does not operate.
・
When Light color of Light alert is "Rainbow", Light color of Keypad light
operates in "Rainbow (Key press)".
Color scheme
When setting to "ON", Keypad light for an incoming call
Changing display colors
m
[Settings & NW services]
1
scheme
Select startup menu
231e
Select the color
Changing startup menu
Set the menu displayed when pressing m on the stand-by display.
m
[Settings & NW services]
1
221e1-3
Using Kisekae Tool
Use of Kisekae Tool allows to collectively set stand-by display image, menu icons,
incoming/outgoing call images, ring alerts, etc.
・
Kisekae Tool set by default is saved in "Preinstalled" folder.
・
Kisekae Tool in "Preinstalled" folder cannot be moved or deleted. And, the file
name cannot be changed.
Sound/Screen/Light Settings
107
F906i_E1kou
Thumbnails screenList screen
d
a
e
c
c
b
a
b
I
F906i.book Page 108 Monday, April 21, 2008 10:59 PM
・
Using Kisekae Tool, the items below can be set (combinations of items that can
be set vary by Kisekae Tool).
- Stand-by display, Stand-by(Horizontal), Kisekae menu*1, Basic menu, Basic menu
(Background), Battery icon, Antenna icon, Outgoing call image, Call alert image,
Videophone call image, Videophone alert image, Outgoing message image, Mail alert
image, Image message alert, Message retrieving
PushTalk ring alert, Mail ring alert, Chat mail ring alert, MessageR ring alert, MessageF ring
alert, Alarm clock sound, Screen theme
*1
Some Kisekae Tools are not compatible with horizontal or English disp lay when setting
Select language to "English". Also, there are some cases that operation by pressing
or
a
on the stand-by display may cause different actions from ordinary ones or short-
cut operations may be unavailable .
*2
Set the image to display when setting Check new message/SMS.
*3
Set color theme (Color scheme), font, brightness and keypad light color.
*4
Set Style, Time format, Day and La you t.
*5
Set Clock style, Calling image, incoming mail img and Sub-display ligh t.
・
Some types of Kisekae menu change the menu structure according to usage
frequency. Also, the number assigned to menu item (item number) may not be
applicable to some menu items. In such a case, as operations cannot be
performed as described in this manual, switch to Basic menu.
the menu screen temporarily"
・
When setting 2in1 to ON, no Kisekae Tool items are set on the stand-by display
in Dual and B modes, and for Call/V.phone/Mail ring alert of Number B.
◆
Changing Kisekae Tool
m
[Data Box]
1
i-mode :
Preinstalled :
My folder :
・
Appear if a folder is created.→P317
・
Folders can be deleted or folder names can be changed.→P317
Search by i-mode :
→
site.
7
Kisekae Tool downloaded from sites
Preinstalled Kisekae Tool
Kisekae Tool moved from other folders
Kisekae Tool can be downloaded by connecting to the
P298
*2
, Call ring alert, Videophone ring alert,
*3
, Clock format*4, Sub-display
*5
→
P36 "To switch
d
Select a folderePlace the cursor on Kisekae Tool
2
The display name of the file at the cursor position and an icon indicating
details are shown.
a
Originated
: i-mode
: i-mode (compatible with Standard font)
: i-mode (compatible with Large font)
: Preinstalled (compatible with Standard font)
: Preinstalled (compatible with Large font)
: Search by i-mode (only "i-mode" folder is displayed)
b
File types
: The last setting
: The current setting
(the back card is gray) : Not set
(Upper half is gray) : Partially saved
α
ppli unavailable due to UIM operation restriction.
: i-
c
File restriction
: File restricted
→
P298
108
Sound/Screen/Light Settings
F906i_E1kou
QR code for
site access
F906i.book Page 109 Monday, April 21, 2008 10:59 PM
d
Thumbnail image
When there is no preview image, displayed as below.
(the back card is pink) : No preview image
α
ppli unavailable due to UIM operation restriction.
: i(Upper half is gray) : Partially downloaded
: Search by i-mode (appears only in "i-mode" folder)
e
File size (Size)
Resetting :
・
・
Setting list screen operations : Select a folder
・
・
Checking memory :
Checking memory→P321
Ce
3
Data of Kisekae Tool is collectively set.
・
・
Viewing/Changing detail information :
Detail information→P319
Canceling the setting :
・
・
Moving/Restoring data :
Moving/Restoring→P318
Deleting data :
Deleting→P321
m6e
Selecting "Reset all" resets Kisekae Tool settings to the default state.
Selecting "Reset menu" resets settings of "Kisekae menu", "Basic menu"
and "Basic menu (Background)" to the default state.
Set to "Yes" for thumbnail display or "No" for list display.
When operating from the folder list screen, press m and select "Setting".
Authenticatee"Reset all" or "Reset menu"
em7e1
m4e
Place the cursor on a data type
"Yes"
When a large font setting is included in Kisekae Tool, a confirmation screen
for changing the font of mail, phonebook, call logs, etc. appears. And, when
changing to a Kisekae Tool not containing large font while setting in a large
font, a confirmation screen for changing the font of mail, phonebook, call
logs, etc. appears. Follow the instruction of this screen and set.
When placing the cursor on Kisekae Tool partially downloaded and
pressing one of
remaining data appears. Select "Yes" to start downloading.
When "Selected items" is selected, select the Kisekae Tools to cancel and
press
When "One item" or "All items" is selected, select "Yes".
g, C
C
, and select "Yes".
m5e1-3
or a, a downloading confirmation screen of the
m2e1
m3e1-3
m4e1
or
2e1-3
or
→
2
P298
or
2
Sorting data :
Sorting→P321
❖
Setting to Special mode
If you set to Special mode, "
and automatically set to Kisekae Tool.
If you perform the same operations as the setting procedure, "
(Calorie)" is deleted from "Preinstalled" folder, and the set items are
restored to the default state.
The access method may be changed witho ut pr evious notice.
(@ F mobile phone supporters)" (as of April, 2008)
(Menu list) →
→ @Fケータイ応援団
ケータイ電話メーカー
(Tricks)" of "@F
(@ F mobile phone supporters)
カロリー
(Mobile
ケータ
Sound/Screen/Light Settings
109
F906i_E1kou
ab
F906i.book Page 110 Monday, April 21, 2008 10:59 PM
◆
Viewing Kisekae Tool settings
m
[Data Box]
1
Place the cursor on Kisekae Tool and
2
The list of the contents saved in Kisekae Tool is displayed.
a
Item : Icons and item names
Check mark (red) is added to the set icon.
b
File format
: Image in JPEG format : Image in GIF format
: SWF (Flash graphics) : Kisekae menu
: Movie in MP4 format : Melody in MFi format
: Melody in SMF format No icon : No file
・
Confirm the contents also by pressing m and selecting "Check info".
・
Press C to set Kisekae Tool.
Displaying the preview image of Kisekae Tool : Place the cursor on Kisekae
Tool and
・
You may also press C on the preview screen to set Kisekae Tool.
Select an item
3
The data or information of item is displayed or played.
・
When Screen theme is selected, a preview screen specified by "Color
theme" and "Font" is displayed.
g
.
7e
Select a folder
a
✔
INFORMATION
・
When using "Simple Menu", there is no bilingual setting. Item number of "Simple
Menu"
→
P428
・
Functions changed with Kisekae Tool are automatically set to "Kisekae Tool". When
two or more Kisekae Tools are set with some overlapping items, data of the Kisekae
Tool item set last is used. When Kisekae Tool is set, if other than "Kisekae Tool" is
selected on any setting screen, a Kisekae Tool cancellation confirmation screen
appears. If you select "Yes", only corresponding items are canceled. To return to the
settings of Kisekae Tool, reset Kisekae Tool.
・
When Kisekae Tool contains data that cannot be displayed or played, only that data is
not set.
Customizing the menu
The menu items of Kisekae menu can be changed by yourself, or icons of Basic
menu can be changed.
・
The items that can be operated vary by the set contents.
◆
Customizing the menu items of Kisekae menu
・
Only when using a Kisekae Tool compatible with changing or replacing the
menu items or setting "
items of Kisekae menu can be customized. For "
the menu screen to display "
❖
Changing menu items
me
1
❖
1
Place the cursor on the menu item and
function to add
・
You can select till second level.
Switching menu items
me
Place the cursor on the menu item and
menu item to be switched to
カロリー
(Calorie)" of Special mode (→P109), the menu
お気に入り
カロリー
(your favorite)" menu.
(Calorie)", press h on
m2e
m3e
Select a
Select the
Sound/Screen/Light Settings
110
F906i_E1kou
F906i.book Page 111 Monday, April 21, 2008 10:59 PM
◆
Resetting the operation logs of the menu
m
[Settings & NW services]
1
◆
Changing the icons and background of Basic menu
meI
1
・
When the display menu is Basic menu, you do not need to press I.
m2
2
Select a functioneSelect a foldereSelect an image
3
Menu icons of other functions can be set successively in the same way.
Canceling 1 item : Place the cursor on an icon and
Canceling all items :
ae
4
5
✔
・
・
・
Select a foldereSelect an image
Background is set.
Canceling background :
Ce
"Yes"
・
When the display menu is Basic menu, the confirmation screen of changing
to the Basic menu does not appear.
INFORMATION
Created animations, Flash graphics or images in "Item" folder cannot be selected. If a
GIF animation is selected, first image is displayed.
Depending on the image size to set, the icon is displayed by 192×192, and the
background image is enlarged/shrunk to 480
In the cases below, the icon and the background of Basic menu cannot be changed.
- Using Kisekae Tool including "Basic menu", "Basic menu(Background)"
- Personal data lock ON
m2e
2231e
"Yes"
m4e
"Yes"
"Yes"
m1e
×
704.
"Yes"
◆
Reset to default menu items and icons
・
Custom menu is also reset to default state.
m
[Settings & NW services]
1
2232e
Displays/Lights settings
Style theme
Authenticatee"Yes"
Customizing FOMA terminal screen
You can make 3 types of original coordinates by changing the screen designs such
as stand-by display, menu, Clock, battery icon, antenna icon or Sub-display
pattern.
・
If setting Style theme, Brightness of Display light, i-mode of Font size, Mail view,
Text input, Font style and Subtitle size of User setting of 1Seg are restored to
default settings. And, when Normal use of Display light time in Display & Key
light is set to "0 sec", the setting is restored to the value set prior to "0 sec".
m
[Settings & NW services]
1
1-3e
2
Title :
Menu design :
Color scheme :
Stand-by image :
display). Still images, GIF animation, Created animation or Flash graphics
can be selected.
clock on the stand-by display, clock design to be displayed, time format,
clock layout, and display type of the day of the week.
Items of Clock display format
Up to 10 two-byte (20 one-byte) characters can be entered.
Select a preinstalled Kisekae Tool.
Select the display color scheme.
Select the image to display for stand-by display (vertical
Select the battery icon type.
Select the antenna icon type.
Select light color of sub-display.
Select the color of Keypad light.
32
eC
Select if you display a
→
P114 Step 1 in "Setting clock display"
Set clock style for sub-display.
Select incoming call image for sub-display.
Select an image pattern to appear for sub-
Sound/Screen/Light Settings
111
F906i_E1kou
F906i.book Page 112 Monday, April 21, 2008 10:59 PM
Battery icon/Signal level icon
Changing battery/signal level icon
m
[Settings & NW services]
1
6
・
When setting Special mode, select from among 1-7.
Indicator light
21e3
or
4e1
-
Indicating newly arrived information such as
missed calls and unread mails with lighting
You can set if you blink the light (including call light, mail light) for missed call or
unread information when FOMA terminal is folded.
m
[Settings & NW services]
1
・
When setting to "ON", if there is newly arrived information indicating an
incoming call or mail from a phone number or mail address saved in
phonebook, the light blinks at intervals of approximately 7 seconds
according to the setting of Light color of Alert by contact of FOMA terminal
phonebook.
✔
INFORMATION
・
If there are multiple newly arrived information, the light turns on in the priority below.
a
Missed call (voice call, videophone call, PushTalk, recorded message)
b
Unread information (Mail, MessageR/F, Chat mail, SMS)
・
When setting Indicator light to "ON", if about 6 hours elapsed since the last
information was received or you delete (the number indicates the
number of items) from the stand-by display, the light stops blinking even if you do not
check the information.
262e1
or
2
Light alert
Setting the lighting patterns and colors used for
an incoming call/mail or while talking
・
This setting is also reflected to Light alert in Call alert, Videophone alert,
PushTalk alert, Mail alert, MessageR alert, MessageF alert, Chat mail alert and
ToruCa alert.
◆
Setting the lighting patterns and colors for incoming
call/mail or ToruCa reception <Light alert>
m
[Settings & NW services]
1
items
eC
・
When setting Light pattern to "Light pattern 1", "Light pattern 2" or "Sync
melody", the light blinks in multiple colors. Light color cannot be set.
・
When setting Light pattern to "Sync melody" and Indicator light to "ON",
Light color when there is newly arrived information depends on Light color
set for Call or Mail.
・
When setting light for receiving ToruCa, set Light to "ON" and select the
Light color.
✔
INFORMATION
・
When setting Alert setting of Chat mail alert to "Same:Mail setting", Chat mail cannot
be set.
・
Even if setting Light pattern to "Sync melody", some melodies are not synchronized.
251e
Set the required
Sound/Screen/Light Settings
112
F906i_E1kou
F906i.book Page 113 Monday, April 21, 2008 10:59 PM
❖
Light alert priority
When setting Light pattern and Light color for Light alert of the light in multiple
functions, light turns on in order of the priority below.
Setting lighting and lighting color during a call/IC card
transaction <Call session light/IC card light>
m
[Settings & NW services]
1
required items
・
When setting Light to "ON", Lighting color can be set.
◆
Setting lighting pattern and color during GPS <GPS
eC
25e2
or
4e
Set the
light alert>
m
[Settings & NW services]
1
items
eC
・
When setting Light pattern to "OFF", "Light pattern 1" or "Light pattern 2",
Light color cannot be set.
・
Lighting pattern cannot be set to "Sync melody". And, "Loc. request-accept
or Loc. request-verify cannot be set to "OFF".
◆
Setting lighting for opening, closing and turning
253e
Set the required
<Open/close/turn>
m
[Settings & NW services]
1
items
eC
・
When setting Light to "ON", Light color can be set.
255e
Set the required
✔
INFORMATION
・
When lights are ON, the phenomena below may occur. They are caused by
characteristics of LEDs used for lighting or FOMA terminal, not defects of FOMA
terminal.
- The lighting color or brightness differs by FOMA terminal.
- The actual lighting color may seem to disc ord from the ligh ting colo r name de pending on paintin g
color of FOMA terminal.
Font style
Changing font style
The font of characters to display on the menu screen, i-mode site, Full Browser,
character entry screen, etc. can be changed.
・
In addition to "
downloaded.
m
1
Alphameric field
Select Hiragana/Katakana fieldeSelect a font
2
Deleting downloaded fonts : Select Hiragana/Katakana fieldePlace the
・
C
3
✔
INFORMATION
・
This setting is not reflected to some functions such as camera, i-αppli or i-motion.
Font size
プリティー桃
[Settings & NW services]
cursor on the font and
Preinstalled fonts or fonts currently used cannot be deleted.
" stored by default, you can use other kana fonts
e1-3
me
272e
"Yes"
Select the Kanji/
Changing font size
The size of font used for full-screen entry of notepad, message text, etc. or for
displaying screen memo, i-mode site, Full Browser or mail can be changed.
Sound/Screen/Light Settings
113
F906i_E1kou
F906i.book Page 114 Monday, April 21, 2008 10:59 PM
<Example> When setting with All listed
m
[Settings & NW services]
1
1e1-6
2
Setting i-mode view :
Setting Full Browser :
Setting Mail view :
Setting Text input :
Setting Phonebook/Logs :
✔
INFORMATION
・
When a font size that cannot be displayed for i-mode view, Full Browser, Mail view or
Phonebook/Logs is selected with All listed, the closest size is set.
・
By the font size selected with All listed, a confirmation screen of menu font size
appears when changing Kisekae Tool. When selecting "Yes", Kisekae Tool applicable
to the selected font size can be selected.
・
The font size can be changed also from the mail details screen. The settings are
reflected to Mail view of this setting.
Clock display format
2e1-5
3e1-4
4e1-5
5e1-6
271
6e1
→
P209
or
2
Setting clock display
Whether to display clock, the design, size or layout of clock display on the standby display can be set. The language to use to display the day of the week or the
display format can also be set.
m
[Settings & NW services]
1
items
eC
Style :
Set if you display clock. Select the clock style from "Analogue", "Digital
1-4" and "World time clock" when setting it to "ON".
・
When setting to "World time clock", Japan time appears on the left side
and the time/name of the specified time zone appears on the right side,
respectively.
Time format :
Clock layout :
Set the clock display format to either "24 hour" or "12 hour".
Set the position to display the clock.
724e
Set the required
Day :
Set if you use Japanese or English to display the day of the week. When
Style is "World time clock", setting is unavailable.
・
When setting to "Terminal settings", the display depends on the bilingual
setting.
World time clock :
summer time when "World time clock" is selected in Style. And, set the
name of the time zone.
・
When Summer time is "ON", the displayed time is set forward one hour
from the time of the specified time zone.
✔
INFORMATION
・
On a screen other than the stand-by display, the clock appears in the upper-right
corner of the display. This display depends on Time format ("24 hour" or "12 hour").
・
In the cases below, clock is displayed in the upper right corner of the display
regardless of the settings of Style or Clock layout.
- When a movie/i-motion or Chara-den is set on the stand-by display
- When the i-
・
In All lock or Omakase Lock, the clock is displayed at the "Top" regardless of this
setting.
・
Two time zone clocks are used when using FOMA terminal overseas.→P413
・
"Digital 1" and "World time clock" are 24 hour regardless of format setting.
Set the time zone to be displayed or set if you enable
α
ppli stand-by display is displayed
Sound/Screen/Light Settings
114
F906i_E1kou
F906i.book Page 115 Monday, April 21, 2008 10:59 PM
Security code
Security code available with FOMA terminal ...................................................................................................................116
Using fingerprint authentication .......................................................................................................................................118
Restricting mobile phone operations or functions
Preventing unauthorized use ............................................................................................................................... All lock120
Using Omakase Lock ................................................................................................................................. Omakase Lock121
Disabling to use personal information ............................................................................................. Personal data lock122
Setting operations for using or displaying personal information .......................................................... Privacy mode124
Setting contents displayed when receiving call or mail .......................................................... Receive display option129
Preventing inadvertent operation of side keys ........................................................................................ Side key hold129
Locking key each time FOMA terminal is folded ...................................................................................... Lock on close129
Restricting calls/mail/data transfer
Accepting/Rejecting calls from specified phone numbers ..............................................................................................131
Setting operations for incoming calls not to notify caller ID .......................................................... Anonymous caller132
Setting not to answer calls from the party not saved in phonebook ................................................ Ring alert delay132
Rejecting calls from phone numbers not saved in phonebook ..................................................... Unregistered caller133
Other "Security Settings"
Data Security Service ..........................................................................................................................................................133
Other "Security Settings" ...................................................................................................................................................134
Security Settings
115
F906i_E1kou
F906i.book Page 116 Monday, April 21, 2008 10:59 PM
Security code
Security code available with FOMA terminal
Some of the convenient FOMA terminal functions require entry of security code.
In addition to the terminal security code for using some terminal functions, there
are several types of security codes such as network security code for network
services and i-mode password. Use these codes appropriately for FOMA terminal.
・
The terminal security code, network security code or i-mode password entered
is masked with " ".
Precautions related to security codes
・
When setting a security code, do not use a number that can be easily known
to others, such as "birthday", "a part of a phone number", "street address or
room number", "1111" or "1234". Keep a separate note of the set security
code.
・
Be careful never to reveal your security code to others. If a security code is
known to and misused by others, DoCoMo assumes no responsibility for
damages resulted from it.
・
DoCoMo never asks you about your security code.
・
If you forgot your security codes, or fingerprint authentication for all of the
fingers registered is unavailable when Fingerprint access is "ON", you need
to bring a document (such as a driver's license) for identifying that you are
a subscriber, FOMA terminal and UIM to a DoCoMo Shop.
For details, contact the phone number for "General Inquiries" on the back
of this manual.
❖
Terminal security code
The default security code is "0000", which you can change by yourself.→P117
・
If a wrong terminal security code is entered 5 times consecutively, the power is
turned OFF.
・
For the setting using Verify fingerprint, the fingerprint authentication screen
appears instead of the terminal security code entry screen. Press
the terminal security code entry screen. The terminal security code cannot be
entered when Fingerprint access is "ON".
m
to switch
❖
Network security code
Network security code is a 4-digit number used when making various applications
for DoCoMo e-site and using various network services; you can set any number at
subscription and optionally change it later.
If you have "DoCoMo ID/Password" for "My DoCoMo" that is a total support site for
a PC, you can change your network security code from a PC.
From i-mode, you can change the code by yourself accessing "
(Procedures)" in DoCoMo e-site.
・
For "My DoCoMo" and "
manual.
❖
i-mode password
4-digit "i-mode password" is required to register/delete sites in My Menu or
subscribe/unsubscribe to Message Service or i-mode pay sites. The default
security code is "0000", which you can change by yourself.
There may be passwords required by individual IPs (Information Providers).
❖
PIN code/PIN2 code
2 security codes which are the PIN code and PIN2 code can be set for UIM. Their
security codes are set to "0000" by default, which you can change by yourself.
P117
PIN code is a number (code) to be entered each time UIM is installed or FOMA
terminal is powered ON to confirm the user and to prevent unauthorized use of
FOMA terminal. Making/Receiving calls and terminal operations are enabled by
entering PIN code.
The PIN2 code is the security code to be used when requesting the issuance of a
user certificate, resetting Total calls cost or changing settings of Reset call cost.
・
When installing UIM that has been used with another FOMA terminal, the PIN
code and PIN2 code should be the same ones set previously. If no changes have
been made to PIN code and PIN2 code, your codes are "0000".
ドコモeサイト
(DoCoMo e-site)", see the back of this
→
P162
各種手続き
→
Security Settings
116
F906i_E1kou
Enter PIN
code/PIN2
code
Enter
PUK
Input error
3 times in a row
Contact a
DoCoMo shop
Input error
10 times in a row
Setting a new
PIN code/PIN2
code is available
OK
F906i.book Page 117 Monday, April 21, 2008 10:59 PM
❖
PUK (PIN Unblocking Key)
PUK is a number of 8-digit code used to unblock PIN or PIN2 lock. You cannot
change PUK by yourself.
・
If a wrong PUK is entered 10 times consecutively, UIM is locked.
✔
INFORMATION
・
When using Password manager with the fingerprint authentication and a terminal
security code access available, change the terminal security code. For the new
terminal security code, avoid use of an easily-guessed number such as the low-order
4 digits of the phone number and take care not to let others know the terminal security
code. Keep a separate note of the set security codes.
*
Note that DoCoMo is not liable for any damages caused through incorrect use of the data by a
third party.
Terminal security code change
Changing terminal security code
m
[Settings & NW services]
1
461e
code
Enter the new terminal security code in New security code-check
2
field
eC
AuthenticateeEnter the new terminal security
Setting PIN code
◆
Setting whether to require entry of PIN code when
turning power ON <PIN1 code ON/OFF>
If a wrong PIN code is entered 3 times consecutively, the PIN code is locked. Press
g
and enter PUK.
・
The PIN code entry screen is displayed only when the current setting is changed.
m
[Settings & NW services]
1
2e
Enter PIN code
❖
When PIN1 code ON/OFF is set to "ON"
When FOMA terminal is powered on, the PIN code entry screen is displayed. The
stand-by display appears when correct PIN code is entered, but all operations are
unavailable when not.
・
You can make emergency calls (110, 119 and 118) even while PIN code entry
screen is being displayed.
✔
INFORMATION
・
When the date/time specified in Alarm clock or schedule has come with Alarm auto
power ON is "ON", the power is turned ON and the alarm starts sounding before the
PIN code entry screen is displayed. When
code entry screen is displayed. Even if a downloaded melody, i-motion or music is set
as an alarm, operations are carried out as specified in the default settings.
◆
Changing PIN/PIN2 code
・
To change the PIN code, you need to set PIN1 code ON/OFF to "ON".
m
[Settings & NW services]
1
2e
Authenticate
453e1
f
is pressed to stop the alarm, the PIN
45e1
or
or
Security Settings
117
F906i_E1kou
F906i.book Page 118 Monday, April 21, 2008 10:59 PM
Enter the current PIN/PIN2 codeeEnter a new PIN/PIN2 code in
2
the New PIN/PIN2 code entry fieldeEnter the new PIN/PIN2 code
in the New PIN/PIN2 code - check field
・
If the PIN/PIN2 code was not correctly entered, a screen indicating the
failure of authentication appears. Press
code. If a wrong code is entered 3 times consecutively, the PIN code is
locked. Press
✔
INFORMATION
・
Even if PIN2 code is locked by entering incorrect PIN2 code 3 times consecutively,
making/receiving calls, PushTalk calls or sending/receiving mail is available; if PIN
code is locked by entering incorrect PIN code 3 times consecutively, these operations
are unavailable.
g
and enter the PUK.
eC
g
and enter the correct PIN/PIN2
Unblocking PIN/PIN2 code
If a wrong PIN/PIN2 code is entered 3 times consecutively on the PIN code entry
screen, lock is set. If this happens, unblock and enter a new PIN code.
・
You can make emergency calls (110, 119 and 118) in the entry field of PUK of
PIN1.
On the confirmation screen of the PUK, "OK"eEnter the PUK
1
Enter a new PIN/PIN2 code in the New PIN/PIN2 code entry
2
fieldeEnter the new PIN/PIN2 code in the New PIN/PIN2 code check field
eC
・
Simultaneous use of the fingerprint authentication and terminal security code
access
→
P117 INFORMATION in "Security code available with FOMA terminal"
◆
Precautions for using fingerprint authentication
・
This function is used to authenticate the information on the characteristics of
fingerprint image. For this reason, user with fingerprint that does not provide
enough characteristics information may not be able to use the fingerprint
authentication.
・
The 3 readings with the same finger are needed to register your fingerprint. Do
not register the different finger.
・
Authentication performance (the probability of successful fingerprint
authentication for correct sliding of the finger) depends on the condition of use.
The finger conditions below may make fingerprint registration difficult or
reduce the authentication performance. Taking measures according to the
condition of your finger including washing hands, wiping hands, using a
different finger for fingertip authentication and applying cream if the hand is
rough or dry may improve the authentication performance.
- Fingers are wrinkled, wet or sweaty after taking a bath, etc.
- Fingers are sweaty or oily enough to obscure ridges of fingertip, or fingers are soiled with
dirt or oil
- Rough or damaged (cut, inflamed, etc.)
- Extremely dry or having tendency to get dry
- Became fat or thin to cause the fingerprint to change
- Fingerprint unclear by wearing away
- Surface in a condition extremely different from that at the time of fingerprint registration
Figure AFigure B
Using fingerprint authentication
Use of the fingerprint authentication allows you to skip the operation of entering
the terminal security code with keypads by sliding your fingertip on the
fingerprint sensor.
・
Even with fingerprint authentication set, pressing m on the fingerprint
authentication screen displays the terminal security code entry screen, allowing
you to enter terminal security code for authentication. The terminal security
code cannot be entered when Fingerprint access is "ON".
Security Settings
118
Fingerprint
sensor area
・
For registration/authentication of fingerprint, align the first joint of one of your
fingers to the center of the sensor, press your finger parallel to the sensor and
slide it downward until it passes the fingerprint sensor area. To prevent
authentication failure due to difference in finger positions at registration and
authentication, put your finger in the same direction as the terminal and slide it.
F906i_E1kou
F906i.book Page 119 Monday, April 21, 2008 10:59 PM
・
If the sliding movement is too fast or too slow, the fingerprint may not be
correctly recognized.
・
Registration/Authentication of fingerprint may be difficult with your thumb as
the center of the whorl of the fingerprint may be displaced or distorted. Try as
much possible to slide your finger so that the center of the whorl of the
fingerprint passes the center of the fingerprint sensor.
・
If the fingerprint was not correctly read, a warning message appears. If the
fingerprint was not authenticated within a certain period of time, a confirmation
message appears and the screen returns to the previous screen.
・
If fingerprint registration or authentication is started with the finger put on the
fingerprint sensor, activation may be unavailable. Put the finger off from the
fingerprint sensor and retry the operation.
・
When connecting FOMA terminal using a USB cable to a device which requires
grounding such as a desktop PC, make sure that the device is grounded in
advance. If the connected device is not grounded, fingerprint authentication
may be unavailable. In such a case, perform fingerprint authentication while
touching a metallic part (frame, external connector, etc.) of the connected device
or after disconnecting FOMA terminal from the device.
・
Fingerprint authentication technology does not guarantee complete identity
authentication or verification. Note that DoCoMo assumes no responsibility for
any damage caused by use of this product or failure to use this product.
◆
Fingerprint sensor
・
The conditions below may cause failure or damage.
- Strike or give a hard shock
- Scratch or pick with a pointed object
- Rub hard with a fingernail or hard object (such as metal piece of strap) and scratch the
surface of the fingerprint sensor
- Scratch or stain the surface of the fingerprint sensor with soil etc.
- Cover with a sticker or paint with ink etc.
・
The conditions below may make fingerprint scanning difficult or reduce the
authentication performance. Clean the surface of the fingerprint sensor from
time to time.
- Dirt of dust, sebum, etc., attachment or condensation of moisture of sweat etc.
・
If any of the phenomena below occurs, clean the surface of the fingerprint
sensor. The phenomena may be improved.
- "Clean surface of sensor." appears
- Fingerprint registration or authentication fails often
・
To clean the fingerprint sensor, wipe its surface with a dry, soft and static-free
cloth. Long-term use may cause the fingerprint sensor to get dusty, but do not
try to remove the dust with a pointed object even in such a case.
・
Static electricity may cause malfunction. Before placing the finger on the
fingerprint sensor, eliminate static electricity by touching a metal object with the
hand etc. Take particular care in dry seasons such as winter.
◆
Registering fingerprint to be used for authentication
<Register fingerprint>
・
Up to 10 items can be registered.
m
[Settings & NW services]
1
"OK"ePress the sensor with your finger and slide slowly
2
downwards by following the instruction message
・
Fingerprint registration is canceled when there is an incoming voice/
PushTalk call or a previously specified date/time for Alarm clock or
schedule has come during the fingerprint scan.
Enter the name to register (up to 10 two-byte (20 one-byte)
3
characters)
・
◆
Setting whether to use only fingerprint authentication
eC
appears with the finger print set for use.
462e
Authenticate
for authentication <Fingerprint access>
・
When setting Fingerprint access to "ON", 2 or more registrations of different
fingers and use for authorize are required.
・
When setting Fingerprint access to "ON", authentication using terminal security
code is unavailable. If authentication is disabled for any registered fingers due
to FOMA terminal operating conditions, finger conditions, failure of the
fingerprint sensor or other reasons, you need to bring a document (such as a
driver's license) for identifying that you are a subscriber, FOMA terminal and
UIM to a DoCoMo Shop.
Security Settings
119
F906i_E1kou
F906i.book Page 120 Monday, April 21, 2008 10:59 PM
<Example> Setting to "ON"
m
[Settings & NW services]
1
1
2
Canceling :
"OK"
3
・
The next procedure
authentication"
Setting authentication
"Managing fingerprint" Step 2
◆
Authenticating fingerprint
When the fingerprint authentication screen appears, slide your
1
fingertip on the fingerprint sensor
・
・
・
✔
INFORMATION
・
If fingerprint authentication failed 5 times consecutively, the terminal security code
entry screen appears. If authentication failed 5 times consecutively when Fingerprint
access is "ON", the power is turned OFF. The cumulative number of authentication
failure is cleared by correct authentication or redisplaying of fingerprint
authentication screen.
◆
Managing fingerprint
You can display or delete fingerprint set for authentication, change the registered
name, etc.
・
If all fingerprints set for authentication are canceled or deleted, the fingerprint
authentication becomes unavailable.
Security Settings
120
2
ea
If 2 or more fingerprint items registration and Use for authorize are not
made, setting cannot be completed.
For fingerprint authentication, press the finger set for use against the
fingerprint sensor.
If the authentication is failed, remove the finger from the fingerprint sensor
and retry authentication. When authentication performance is low, retry the
fingerprint registration.
Pressing m or a keypad displays the terminal security code entry screen,
except when Fingerprint access is "ON".
→
P119 Step 2 in "Registering fingerprint to be used for
→
464e
P120 "Setting/Canceling use for authorize" in
Authenticate
・
When setting Fingerprint access to "ON", and there are 3 or more registered
fingerprints set for authentication, the fingerprints can be deleted after
canceling authorize. Note that if there are 2 or less fingerprints, they cannot be
canceled authorize or deleted.
<Example> Deleting fingerprint (1 item)
m
[Settings & NW services]
1
Place the cursor on the fingerprint to delete and
2
m31e
・
To check the registered fingerprint, press I.
Setting/Canceling use for authorize: Select a fingerprint to set/cancel use for
authorize
appears with the finger print set for use.
Deleting selected items :
Deleting all items :
Renaming data :
Changing the order : Place the cursor on the fingerprint and
6
Restricting mobile phone operation s or functions
All lock
"Yes"
m33e
m4e
463e
m32e
"Yes"
Edit the name
Authenticate
Select fingerprint
eC
eCe
me5
"Yes"
or
Preventing unauthorized use
When All lock is activated, menu operations are disabled to prevent unauthorized
use by third parties.
To make an emergency call (110, 119 or 118) in All lock, enter the emergency
call number on the stand-by display and press
*
The emergency call number entered on the terminal security code entry screen is marked
with " ".
■
For Verify fingerprint
Press m on the stand-by display, enter the emergency call number on the
fingerprint authentication screen and press
■
When Fingerprint access is "ON"
Press
mn
on the stand-by display, enter the emergency call number and
n
press
.
n
n
.
.
F906i_E1kou
F906i.book Page 121 Monday, April 21, 2008 10:59 PM
・
To start both IC card lock and All lock, start IC card lock→All lock in sequence.
→
P249
・
The microSD card and UIM remain unlocked.
m
[Settings & NW services]
1
"All locked." appears on the stand-by display.
Canceling : Enter the terminal security code
・
If fingerprint authentication is set, press m and perform authentication.
✔
INFORMATION
・
PushTalk calls received in All lock are rejected and the callers hear the busy tone. It
appears in Received calls when All lock is canceled.
・
A call is received regardless of the settings of Specified caller.
・
Even if a stand-by display is set, the image set by default is displayed.
・
All lock takes precedence over it even if Lock on close is "ON".
・
The alarm clock and schedule reminder do not operate even when the specified date
and time arrive. Activation by watching reservation or recording reservation of 1Seg
does not occur.
・
Even when the specified date/time comes, Timed theme is not switched. When
canceling All lock, Timed theme not in operation start in order.
・
The functions below are available.
- Receiving voice/videophone calls*1, making emergency call (110, 119, 118)
- Automatic update of Data Center
- Receiving i-mode mail, MessageR/F, SMS
- Receiving Area Mail
- Starting Omakase Lock
- Obtaining ToruCa from IC card reader
- Operations for location request of GPS
- Software update
- Auto-update of pattern definitions
*1
Only a phone number is displayed, bu t the other party's na me or image saved in phonebook does
not. The incoming image, ring alert and other settings are reset to default settings, and the
default image is displayed as videophone substitute image. Chaku-moji can be received, but it
is not displayed on the incoming call screen. It is displayed in Received calls when All lock is
canceled.
*2
No receiving actions such as displaying the receiving or reception result screen, emitting ring
alert are taken.
*3
Even when the requestor ID of Location reque st matches a pho nebook entry, th e requestor na me
is not displayed.
412e
*2
*3
Authenticate
Omakase Lock
Using Omakase Lock
This is a service to lock FOMA terminal that the subscribed UIM is installed by
making a call to DoCoMo or by remote control from My DoCoMo in case FOMA
terminal is misplaced.
FOMA terminal can be unlocked upon your request, etc.
*
Omakase Lock is a charged service. However, if you subscribe at the same time as service
interruption or during interruption, no charges occur. Even in Omakase Lock, if Request
permit/deny is "Always permit", FOMA terminal responds to location request of GPS
function.
Setting/Canceling Omakase Lock
0120-524-360 Office hours : 24hours
*
Omakase Lock can be set/canceled from My DoCoMo site using a PC etc.
・
For details of Omakase Lock, refer to "Mobile Phone User's Guide [i-mode]
FOMA version".
❖
When Omakase Lock is activated
"Omakase Lock active." appears on the stand-by display.
・
Operations except turning power ON/OFF, receiving voice/videophone calls, or
reactions to Location request are unavailable and the IC card functions are also
unavailable. Note, however that the microSD card and UIM remain unlocked.
✔
INFORMATION
・
Voice calls or videophone calls are received, displaying the callers phone number
instead of the name or image saved in the phonebook. The incoming image, ring alert
and other settings are reset to default settings, and the default image is displayed as
videophone substitute image. The setting you made is restored when Omakase lock
is canceled.
・
PushTalk calls received are rejected and the callers hear the busy tone, but the calls
are recorded as missed calls.
・
Chaku-moji can be received, but it does not appear on the incoming call screen. The
Chaku-moji appears in Received calls after Omakase Lock is canceled.
・
Even when the requestor ID of Location request of GPS matches a phonebook entry,
the requestor name is not displayed.
Security Settings
121
F906i_E1kou
F906i.book Page 122 Monday, April 21, 2008 10:59 PM
・
The received mails are stored in i-mode Center.
・
When Omakase Lock is activated while other functions are active, those functions are
terminated (data being edited, if any, may not be saved before the termination).
・
Even with various lock functions set, Omakase Lock takes precedence over them.
・
Omakase Lock is unavailable when FOMA terminal is misplaced with its power OFF,
put out of service area or in Self mode.
・
You can turn ON/OFF the power, however, lock is not canceled even if you turn OFF
the power.
・
If you are a subscriber to Dual Network Service and using mova service, Omakase
Lock is unavailable.
・
Omakase Lock is a service that locks FOMA terminal on request from the subscriber
of UIM installed in it. FOMA terminal is locked on request from the subscriber even
when the holder of FOMA terminal is different from the subscriber.
・
Omakase Lock can be canceled only when UIM with the same phone number as the
one used when activating Omakase Lock is installed. If the lock cannot be canceled,
contact the phone number for "General Inquiries" on the back of this manual.
Self mode
Preventing making/receiving calls
This function disables all functions that require communications such as calls,
PushTalk, i-mode, mail, infrared communication.
c
(1 sec. or more)e"Yes"
1
appears at the top of the display.
Canceling : c (1 sec. or more)e"Yes"
✔
INFORMATION
・
The functions below are not available.
- Making/Receiving call or PushTalk call, making emergency call (110, 119, 118)
- i-mode, sending or receiving mail
- ToruCa obtained from IC card reader
- GPS (including registering, editing and deleting service clients in LCS clients list)
- FM radio waves sending
- Infrared communication/iC transmission or infrared remote control
- Packet communication or 64K data communication with a PC
*
After making call, self mode is canceled.
・
If you receive a call, a message is played for the caller that you are out of service area
or your terminal is turned OFF. The caller can use Voice Mail service and Call
forwarding service.
Security Settings
122
・
When a PushTalk call comes in, reception is rejected and the callers hear the busy
tone.
・
i-mode mail and MessageR/F are stored in i-mode Center and SMS in SMS Center
when they are received. To receive messages, perform i-mode/SMS inquiry after
canceling Self mode.
Personal data lock
Disabling to use personal information
You can temporarily restrict use of i-mode, mail, personal information, etc.
・
This function cannot be activated when Unregistered caller is "ON".
・
Calls made or received in Personal data lock are recorded. Making calls from
Redial or Received calls is available
m
[Settings & NW services]
1
413e
When "ON" is set, appears on the stand-by display.
❖
When Personal data lock is ON
All or a part of the settings in the functions below are restricted. The microSD card
and UIM remain unlocked.
-Mail*1, Check new message, Chat mail*1, SMS*1, receiving Area Mail
- i-mode, MessageR/F
α
ppli
-i-
- Phonebook, PushTalk phonebook, Ans.Machine & Vo ice memo (Movie memo), Mail logs
- Data Box (All functions)
- Bar code reader, Ir/iC/PC connection
*4
GPS
*
, Pedometer
- Quick search
- Call ring alert, Mail/Msg ring alert, GPS alert, Alarm sound, Display turn sound, Melody effect
sound, Image/i(excluding Contact image), Mail image, Kisekae/Themes, Sound & Image, Anonymous caller,
Headset key control (Headset quick-dial ) , Reject/Accept call, V.phone dialing img.,
Videophone alert, Image setting
Vibration message notification, Chaku-moji
Incoming calls melody setting of Multi number
F906i.book Page 123 Monday, April 21, 2008 10:59 PM
- User information
- IC card content, DCMX, ToruCa, Search by i-mode
- 1Seg (except a part of User setting)
*1
Automatic reception is available, but none of receiving actions such as displaying the
receiving or reception result screen, emitting ring alert are not taken. Mail creation from
mail logs is also unavailable.
*2
Only a mail address is displayed, but the other party's name or image saved in phonebook
does not.
*3
Data transfer in infrared communication/iC transmission or using USB connection is
unavailable.
*4
Reactions to a Location request are available.
*5
Search by function with restriction is unavailable with Personal data lock ON.
*6
The information of the Scheduler is not displayed on the calendar set for stand-b y display.
*7
The default image is displayed as videopho ne substitute image.
*8
Chaku-moji can be received, but it does not appear on an incoming call screen. It appears in
Received calls when Personal data lock is canceled.
*9
When program downloading starts, the program downloading screen appears, but the
downloading result screen does not appear.
✔
INFORMATION
・
When making/receiving a call to/from the party saved in the phonebook or PushTalk
phonebook, neither name nor image saved is displayed and only the phone number
is displayed.
・
does not appear on the stand-by display even when Answer machine is activated,
and an icon for a recorded message which has not been played is also not displayed.
・
When data to which Personal data lock applies is set as the stand-by display or ring
alert, the default setting becomes active in Personal data lock (when menu is a
Kisekae menu except the one set by default, Basic menu is displayed). The setting you
made is restored when canceled. When data saved in "Preinstalled" folder is set,
however, the setting does not change even in Personal data lock.
・
Even when the requestor ID of Location request of GPS matches a phonebook entry,
the requestor name is not displayed.
・
On Basic menu or Custom menu, icons of functions and parties with activation
restricted are changed to and person names appear as "
menu, the font color is displayed in gray or the reason is displayed why activation
cannot be performed.
***
". For Kisekae
Keypad dial lock
Prohibiting keypad dial
You can set so that calls or PushTalk calls cannot be made without using
phonebook.
m
[Settings & NW services]
1
415e
When "ON" is set, appears on the stand-by display.
❖
When Keypad dial lock is ON
The operations below cannot be performed.
- Making call from Redial or Received calls*1, making emergency call (110, 119, 118)
- Editing, adding, deleting entries, setting group, adding group or adding phonebook group of
phonebook or PushTalk phonebook
- Editing and resetting recorded user information data
- Phone To (AV Phone To), SMS To and Mail To fun ctio ns
- Phonebook data or user information transf e r to/f r om external devices
- Sending Mail/Chat mail
- Reading template on the mail creation screen, creating mail from the mail template list screen
or the mail template details screen
- Notify location of GPS
- Using network services by the dial up operation
- Packet communication or 64K data communication with a PC
*1
Calls/Messages can be made or sent to parties saved in phonebook.
*2
A mail can be created from a template that a mail address saved in the phonebook is entered
as the destination.
*3
Though notification to notification destinations is available, adding, editing and deleting
notification destinations to LCS clients are unavailable.
Authenticate
*1
/SMS*1, Sending from mail logs
*3
e1
*2
or
2
*1
Security Settings
123
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.