
© 1999 Fujitsu Personal Systems, Inc. 
Point 510 and Point 1600 are trademarks of Fujitsu Personal Systems, Inc. 
1/99 Page 1 of 2  58-0634-00A   
Connectivity P eripherals 
Product Reference
P oint 510, Point 1600
Components that comprise connectivity peripherals are shipped unassembled. This document describes the components used 
to assemble each connectivity peripheral. Use this document to verify that the components you ordered are included. Note that 
some of these peripherals are available in nonlocking versions, see “Order Numbers” later in this product reference for a listin
of locking and nonlocking versions.  
High-Connectivity 
Cradle
Wall-Mount 
Cradle
High-Usage
Wall-Mount
Base
Cradle 
Base
Portable Port 
Expander
Cradle 
Module
Cradle 
Module
Cradle 
Module
Portable Port 
Expander
Port 
Replicator
Cradle
Cradle 
Base
Wall-Mount Cradle 
The wall-mount cr adle is assembl ed using a 
cradle module and wa ll-mount bas e; it provid es a 
connection to a k eyboard and external DC 
power. 
The wall-mount cr adle is shown her e wit h a 
keybo ard and Point 510 pen tablet which are 
separately or derable . 
High-Connectivity Cradle 
The high-connecti vi ty cradle is assem bled using 
a cradle module, cradle base, and portabl e port 
expander; it allows you to connect a PS/2- style 
keybo ard, PS/2-s tyle mous e, e x ternal DC po wer, 
external floppy disk drive, external monitor, 
parallel device, RS- 232C serial device, and Rx/ 
Tx (3 wire) serial de vice. Note that the latch on 
the portable port expander must be remove d 
prior to assembly.
High-Usage Cradle 
The high-usage cradle is assembled using a 
cradle module and cradle base; it allows you to 
connect a PS/2-style keyboard, PS/2-style 
mouse, and e xternal DC power. 
Port Replicator 
The port replicator is assemb led using a cradle 
module and portabl e port ex pande r; it all ows y ou 
to connect a PS/2-style keyboard, PS/2-style 
mouse, external DC power, external floppy disk 
drive, external monitor, parallel device, RS-232C 
serial device, and Rx/Tx (3 wire) serial device. 
Note that the portable port expander latch must 
be remove d prior to assembly. 
Charge-Only 
Cradle
Charge-Only Cradle 
The charge-only cr adle requires no assembly. 
This cradle pr ovi des a connec tion t o e xternal DC 
power and is used f or storing and charging the 
pen tablet bet ween uses. The cradle 
accommodates the pen tablet with or without the 
hand strap attached.
=
+
=
+
+
=
+
=
+
Cradle 
Module
Assembled
Connectivity Peripheral
Components Description

Page 2 of 2
Other Accessories and P eripherals 0
The following accessories and peripherals are not 
included when you order connectivity peripherals and, if 
required in your installation, must be ordered separately: 
• AC adapter (FMWAC4)
• Folding desk stand (FMWDS3)
• External floppy disk drive (FMWFD2)
•Keyboard 
The folding desk stand is commonly used with the port 
replicator.
Related Documentation 0
Refer to the following documents for details on using and 
installing connectivity peripherals.
Connectivity Peripherals User’s Guide (FMW26TRG5) 
This guide provides details on using connectivity 
peripherals for the end user.
Connectivity Peripherals Installation Guide 
(FMW26TRG6) 
This manual provides details on assembling and 
installing connectivity peripherals and connecting 
peripheral interfaces. 
Order Numbers
Order numbers for connectivity peripheral components 
and assemblies are given in the following list. Note that 
assemblies which include the cradle module are available 
in locking and non-locking versions. The nonlocking 
version of the cradle module is not equipped with the 
tubular lock and cradle latches that are present on the 
locking version. 
• FMW26CR1  High-Usage Cradle - Locking 
• FMW26CR21  High-Usage Cradle - Nonlocking 
• FMW26CR2 High-Connectivity Cradle - Locking
• FMW26CR22  High-Connectivity Cradle Nonlocking
• FMW26CR3  Port Replicator - Locking
• FMW26CR23  Port Replicator - Nonlocking
• FMW26CR4 Wall-Mount Cradle - Locking
• FMW26CR24  Wall-Mount Cradle - Nonlocking
• FMW26CR5 Portable Port Expander 
• FMW26CR8  Cradle Module - Locking
• FMW26CR28  Cradle Module - Nonlocking
• FMW26CR9 Cradle Base 
• FMW26CR10 Charge-Only Cradle
• FMW26CR11 Wall-Mount Base
Folding Desk Stand