Fujitsu ECLIPSE DA7122, ECLIPSE PA5422, ECLIPSE 34230, ECLIPSE PA5532, ECLIPSE PA4212 User Manual

Power Amplifiers

2

Power Amplifiers

2

33

4

Ultra-High Power Subwoofer Amplifiers

DA7232

2 Channel Class D Subwoofer Amplifier

4000W

+30

+27.5

+25

+22.5

+20

+17.5

+15

+12.5

+10

+7.5

+5

+2.5

+0

+150

+100

+50

+0

-50

-100

-150

10 20 50 100 200 500 1k 2k 5k 10k 20k

Hz

d
B

A

g

d
e
g

1

0.5

0.2

0.1

0.05

0.02

0.01

0.005

0.002

0.001

%

100m 200m 500m 1 2 5 10 20 50 100 200 500 1k

W

Frequency response, THD+N

ECLIPSE DA7232 ICEpower, 1000W Analog Amplifier W/Supply

Frequency response in 4Ω, 8Ω, and 16Ω and open load. THD+N-Vs-Output power at 100Hz/1kHz/5kHz

5kHz 100Hz & 1kHz

Heavy-duty metal speaker
terminal block easily
accepts heavy gauge
cables.

Heavy-duty metal
speaker terminal
block easily accepts
heavy gauge cables.

High-efficiency, high­energy MOSFET power
supply.

Advanced input stage optimized
for use with subwoofer
ICEpower modules.

Independent toroidal
transformers for each
channel deliver generous
clean power to the
amplification section.

Variable crossover
setting controls
for matching
subwoofers.

Radio frequency
noise filter.

Twin ICEpower amplification
modules form the heart of this
designed-for-competition
subwooofer amplifier.

5

Specifications

DA7232 DA7122

13.8V POWER SUPPLY

Max. Power Output

2000W

× 2ch

2000W

× 1ch

1Ω Not Supported Not Supported

Power Output 2Ω 2000W (2 × 1000W) 1000W

4Ω 1000W (2 × 500W) 500W

THD @ Rated Power @ 1Ω Not Supported Not Supported

@ 2Ω 0.007% 0.007%

@ 4Ω 0.005% 0.005%
Input Voltage Neg Gnd 10.8 ~ 16V 10.8 ~ 16V
S/N Ratio >120dB >120dB
Freq. Response 4 ~ 3000Hz 4 ~ 3000Hz
Crosstalk >80dB >80dB
Slew Rate 20Vµs 20Vµs
Damping Factor >1000 >1000
Input Sensitivity 0.2 ~ 8V 0.2 ~ 8V
Max. Current Consumption 200amps 100amps

CHANNELFLEX CROSSOVER

Amp Crossovers Lo-Pass 12dB/octave 50 ~ 200Hz 50 ~ 200Hz

Subsonic 18dB/octave Defeat 1 ~ 60Hz Defeat 1 ~ 60Hz
Pre-Amp Output Hi-Pass 12dB/octave 50 ~ 200Hz 50 ~ 200Hz
Dimensions (W × H × D) 21˝ × 2.05˝ × 11.85˝ 15.75˝ × 2.05˝ × 11.85˝

Designed, engineered and made in the U.S.A.

DA7122

1 Channel Class D Subwoofer Amplifier

ECLIPSE’s dedicated subwoofer amplifiers
use Class D amplifier technology and
topology to produce the greatest
efficiency of any class of amplifier
operation. The DA7232 2 channel and
DA7122 1 channel Class D subwoofer
amplifiers effortlessly drive any subwoofer
system to produce awesome low
frequencies both heard and felt. ECLIPSE
combined well-known specialist audio
manufacturer Bang&Olufsen’s
amplification modules with proprietary
no-compromise audio technologies to
create the ultimate subwoofer amplifiers.

Class D optimized for low frequency
reproduction.

A class D or Pulse Modulation Amplifier (PMA)
switching amplifier design makes use of its
output devices (usually MOSFETS) to pulse on
and off at very high frequencies with a
continuously changing duty cycle. The result is
an average output level which is then converted
to an audio signal by the averaging action of the
speakers. The efficiency of Class D amplifiers
reaches over 90% with significantly less heat
generation than conventional amplifiers,
allowing smaller dimensions while generating
significant power and making them inherently
ideal for reproducing low frequencies. And
because a dedicated subwoofer amplifier only
reproduces a limited bandwidth, the DA7232
and DA7122 exploit all the advantages of Class
D amplification to the maximum. ECLIPSE also
uses a new and innovative Class D/PMA
modulation method with higher performance
than conventional Class D amplification.

Compact but extremely powerful.

With compact footprints, the DA7232 amplifier
and DA7122 1 channel amplifier easily output
2000W per channel with vanishingly low total
harmonic distortion and a high S/N ratio. The
high efficiency of these amplifiers makes any
forced cooling unnecessary, eliminating fans
and heavy heat sinks even when operating
continuously at high power and driving low
impedance speaker loads.

Integrates seamlessly with the total
system.

These amplifiers incorporate a flexible onboard
crossover section with variable subsonic and
low pass filters for optimally balanced and
seamless sound between subwoofers and main
speakers.

Quality construction throughout.

Built to the same exacting standards as other
models in the Premium Amplifer Series, the
DA7232 and DA7122 boast high-end amplifier
circuits and construction techniques such as
high-efficiency high-energy isolated power
supplies, symmetrical layout, high input
overload, discrete protection and audiophile­grade components. This uncommon level of
attention to build and quality in dedicated
subwoofer amplifiers is what optimizes these
amplifiers for use in the most demanding
systems.

Features

• Maximum power output of 2000W (both
channels) into a 2 ohm load.

• Peak output current in excess of 50A for
virtually limitless power.

• Immense 120dBA dynamic range for
effortless reproduction of the lowest
frequencies.

• Built-in protection against over and under­voltage conditions.

• Additional protection for amplifier and
speakers as well as soft clipping and soft
start-up functions.

• Balanced inputs and outputs.

Premium Amplifier Series

Heavy duty terminal metal
blocks connected directly to
the power switching circuit

Dual toroidal power supply
transformers and filter
capacitors provide noise­free power to the amplifier

Oversized output
transistors utilize the
tried and true Darlington
configuration. You get
uncompromisingly
accurate audio
reproduction at all
power levels

Oversized secondary filter
capacitors give you
stronger bass

Variable crossover
controls let you
precisely tailor the
signals

Shielded and grounded
chokes prevent
electromagnetic and radio
frequency interference from
contaminating the signal

Heavy duty copper
bus bars ensure
low-impedance
power transfer

High-efficiency,
High-energy MOSFET
Power Supply

Power supply section

Signal amp section

34230

2 Channel Power Amplifier with ChannelFlex Crossover plus Subsonic Filter

’00 Product of the Year

6

Power, control and intensity.

The ECLIPSE Premium Amplifiers feature no
current limiting and completely unregulated power
supplies for a neutral, clean sound quality with
virtually unlimited dynamic power on demand.

Separate power supply and signal
amplifier sections.

The ECLIPSE 34230 has separate and independent
amplifier power supply and signal sections. The
benefit of having separate power and driver stages
are greater in a car audio environment, with its
significant electrical current, vibrations and
various sources of distortion. The ECLIPSE 34230
has no noise interference between the power and
driver stages such as switching distortion and
radiated noise for sonic purity and effortless
power.

Symmetrical layout.

The ECLIPSE 34230 utilizes a symmetrical
component layout to achieve superior channel
separation. The right and left channels are
physically isolated to eliminate intermodulation
and achieve excellent separation, resulting in
vastly improved system imaging capability.

Massive bus bars.

The massive bus bars allow high current to flow to
the PC board more efficiently and keeps unwanted
heat and resistance to a minimum.

High voltage input.

ECLIPSE engineered very high input voltage
capabilities into its amplifiers to take advantage of
the high signal voltage output from the head unit.
Able to handle input signals of up to 8 volts, these
amplifiers easily cope with competition-use
demands.

ChannelFlex Crossover.

There are effectively two separate and distinct
crossovers with a variable subsonic filter in the
34230 and switchable slope control for the
PA4212. The selectable slope allows for more
precise control of bandwidth limited output power,
which means more sonic accuracy in subwoofers,
midbass drivers, and midrange drivers without
distortion. The variable subsonic filter in the
34230 and switchable slope control for the
PA4212 will make speakers last longer and sound
audibly better.

Preamp outputs.

The 34230 also features crossover preamp level
outputs, for adding additional amplifiers. Signal
purity is maintained throughout due to common
signal reference grounds and high signal voltages.
It perfectly complements the simplicity of total
system design using ECLIPSE amplifiers.

Intelligent 7-way discrete protection
circuitry.

Seven-way protection circuitry protects the
amplifiers from accidental misconnections or short
circuits in the audio system. There is thermal
protection (up to 90°C), DC offset, protection
against excessive current on the output side,
voltage output overload, excessive current in the
power supply, reverse polarity power input and
shorted speaker leads. A servo system monitors
each of these circuits and measures them against a
reference. If a condition is determined to be
outside of reference tolerances, the amplifier enters
a protection mode, preventing damage to the amp
and audio system. The protection circuitry is
never in the audio signal path, keeping the audio
signal free of interference, coloration or noise.

Noise reduction with low distortion and
ultralow negative feedback.

ECLIPSE amplifiers use very high-quality amp
devices and the circuit makes minimal use of
negative feedback for better sound. The higher­quality components in ECLIPSE amplifiers and
their advanced circuits make “bandaid” fixes like
too much NFB unnecessary.

High-current, high-speed output
devices.

The output devices are capable of generating high
current at high speed to improve both frequency
response and amplifier damping.

High-efficiency, high-energy MOSFET
power supply.

The ECLIPSE power supply uses current draw
from the car’s electrical system more efficiently
to produce higher power.

Double-sided printed circuit boards.

ECLIPSE Premium Amplifiers employ 70-micron
copper circuit board traces (twice the thickness of
a conventional copper trace) for superior sound
quality. This technology provides lower distortion
and improved low frequency performance.

Audiophile-grade component selection.

High-quality components and parts designed
exclusively for quality audio applications are
employed for a difference that is easily heard.

7

8

Specifications

34230 PA5532

13.8V POWER SUPPLY

Max. Power Output

550W × 2ch (4Ω

) 125

W × 4ch (2Ω

), 460

W × 1ch (SW, 2Ω

)

2Ω — 70W × 4ch, 280W × 1ch

Power Output 4Ω 370W × 2ch 50W × 4ch, 200W × 1ch

4Ω bridged — 140W × 2ch

THD @ Rated Power @ 2Ω stereo 0.008% 0.008%

@ 4Ω stereo 0.004% 0.004%

@ 4Ω bridged 0.008% 0.008%
Signal to Noise 105dB 105dB
Freq. Response +0, –0.7 +0, –0.7
Crosstalk –75dB –75dB
Slew Rate 10Vµs 10Vµs
Damping Factor @ 60Hz >200 >200
Input Sensitivity 0.2 ~ 8V 0.2 ~ 8V
Max. Current Consumption (4Ω) 100 amps 70 amps

CHANNELFLEX CROSSOVER

Amp Crossover High Pass 12dB/octave — 50 ~ 200Hz (Front)

120Hz (Rear)

Low Pass 12dB/octave 50 ~ 200Hz 50 ~ 200Hz
Pre-Out Crossover High Pass 12dB/octave 50 ~ 200Hz —

Low Pass 12dB/octave ——
Subsonic Filter Freq. Range 0-60Hz 20Hz (Fix)

18dB/octave 12dB/octave

Slope

(Fix) (Fix)

Dimensions (W × H × D) 18.80˝ × 2.05˝ × 11.85˝ 18.80˝ × 2.05˝ × 11.85˝

Designed, engineered and made in the U.S.A.

HIGH PASS

20k

20k

50

200

50

200

20k

60

AMPLIFER CROSSOVER OPTION :

PREOUT CROSSOVER OPTION :

–18

–12

– 6

0

–18

–12

– 6

0

–18

–12

– 6

0

LOW PASS

SUBSONIC FILTER

PA5532

5/3 Channel Power Amplifier

with ChannelFlex Crossover plus Subsonic Filter

960W

34230

2 Channel Power Amplifier

with ChannelFlex Crossover plus Subsonic Filter

20k

50

200

HIGH PASSFRONT

AMPLIFER CROSSOVER OPTION :

–18

–12

– 6

0

20k

120

HIGH PASSREAR

–18

–12

– 6

0

20k

50

200

LOW PASSREAR

–18

–12

– 6

0

SUBSONIC FILTER 24dB/oct

–18

–12

– 6

0

20k20

9

Specifications

PA5422 PA4212

13.8V POWER SUPPLY

Max. Power Output

200W × 4ch (2Ω

)

310W × 2ch (2Ω

)

2Ω 120W × 4ch 200W × 2ch
Power Output 4Ω 85W × 4ch 130W × 2ch

4Ω bridged 240W × 2ch 400W × 1ch
THD @ Rated Power @ 2Ω stereo 0.008% 0.008%

@ 4Ω stereo 0.004% 0.004%

@ 4Ω bridged 0.008% 0.008%
Signal to Noise 105dB 105dB
Freq. Response +0, –0.7 +0, –0.7
Crosstalk –75dB –75dB
Slew Rate 10Vµs 10Vµs
Damping Factor @ 60Hz >200 >200
Input Sensitivity 0.2 ~ 8V 0.2 ~ 8V
Max. Current Consumption (4Ω) 60 amps 50 amps

CHANNELFLEX CROSSOVER

Amp Crossover High Pass 12dB/octave

50 ~ 200Hz (Front)

—

120Hz (Rear)

Low Pass 12dB/octave 50 ~ 200Hz 50 ~ 200Hz
Pre-Out Crossover High Pass 12dB/octave ——

Low Pass 12dB/octave ——
Subsonic Filter Freq. Range N/A 20Hz (Fix)

12dB/octave

Slope — 24dB/octave

(Switchable)

Dimensions (W × H × D) 13.32˝ × 2.05˝ × 11.85˝ 11.32˝ × 2.05˝ × 11.85˝

Designed, engineered and made in the U.S.A.

20k

50

200

HIGH PASSFRONT

AMPLIFER CROSSOVER OPTION :

–18

–12

– 6

0

20k

120

HIGH PASSREAR

–18

–12

– 6

0

20k

50

200

LOW PASSREAR

–18

–12

– 6

0

PA5422

4/3/2 Channel Power Amplifier

with ChannelFlex Crossover

PA4212

2/1 Channel Power Amplifier

with ChannelFlex Crossover plus Subsonic Filter

LOW PASS

SUBSONIC FILTER 12dB/oct

SUBSONIC FILTER 24dB/oct

AMPLIFER CROSSOVER OPTION :

–18

–12

– 6

0

–18

–12

– 6

0

–18

–12

– 6

0

20k

20k5020200

20k20

20 5045 90 20k1k 10k

LOW PASS

20 2005045 120 20k1k 10k

BASS BOOST

20 2005045 120 20k1k 10k

HIGH PASS

0

+ 9

–12

– 6

0

+ 9

–12

– 6

0

+ 9

–12

– 6

EA3422

4/3/2 Channel Power Amplifier

with ChannelFlex Crossover plus Subsonic Filter

EA3532

5/4 Channel Power Amplifier

with ChannelFlex Crossover plus Subsonic Filter

20 2005045 120 20k1k 10k

HIGH PASS (REAR)

20 2005045 120 20k1k 10k

HIGH PASS (FRONT)

LOW PASS

0

+ 9

–12

– 6

0

+ 9

–12

– 6

0

+ 9

–12

– 6

20 2005045 120 20k1k 10k

490W

Integrated Amplifier Series

The Integrated Amplifier Series from
ECLIPSE represent the highest value in their
class. Keeping our reputation for the
tradition of delivering the best audio quality
in mobile audio, we have developed the new
amplifiers to maximize your listening
pleasure. ECLIPSE also offers the best
warranty in the business, a responsibility
consistent with our serious commitment to
build quality amplifiers that deliver superior
performance year after year of demanding
use.

• High-efficiency, high-energy MOSFET
power supply

• Easily drives low impedance 2Ω loads

• Intelligent 7-way discrete protection
circuitry

• Noise reduction with low distortion and
ultra-low negative feedback

• High-current, high-speed output devices

• Audiophile-grade component selection

• Bass boost

EA2212: 45Hz, 9dB ON/OFF
EA3422: 45Hz, 0 ~ 9dB (variable)

(F/R separate)

• ChannelFlex crossover

EA2212:

Low-pass (50 ~ 200Hz) variable

EA3422:

Low-pass (90Hz) fixed
High-pass (50 ~ 200Hz)
L/R independent

EA3532:

Low-pass (50 ~ 200Hz) variable
High-pass (50 ~ 200Hz) variable [front]
High-pass (120Hz) fixed [rear]

• Epoxy composite PCB

• High-level input

(Add-on capability)

• Subwoofer input and output

(EA3532)

10

’02 Product of the Year

1911

Integrated Amplifier Bridge

Specifications

EA3532 EA3422 EA2212

13.8V POWER SUPPLY

Max. Power Output 105W × 4ch (2Ω

)

123W × 4ch (2Ω

)

105W × 2ch (2Ω

)

230W × 1ch (Subwoofer)

2

Ω

60W × 2ch (Front), 60W × 2ch (Rear)

70W × 4ch 70W × 2ch

120W × 1ch,

4

Ω (Subwoofer)

Power Output

4

Ω

40W × 2ch (Front)

(RMS Continuous Power)

40W × 2ch (Rear) 50W × 4ch 50W × 2ch

120W × 1ch (Subwoofer)

4Ω bridged 120W × 2 (Front/Rear) 140W × 2ch 140W × 1ch

THD

@ 2Ω stereo

0.008% 0.008% 0.008%

@ 4Ω stereo

0.004% 0.004% 0.004%

(Rated Power)

@ 4Ω bridged

0.008% 0.008% 0.008%

Signal to Noise (A-weighted 4Ω

) 105dB 105dB 105dB

Frequency Response

@ 4Ω stereo 20Hz ~ 20kHz

+ 0, –0.7 +0, – 0.7 +0, – 0.7

Crosstalk 4Ω

–70dB – 70dB – 70dB

Slew Rate 10V/µs 10V/µs 10V/µs
Damping Factor @ 60Hz > 200 > 200 > 200
Input Sensitivity (pre out) 0.2 ~ 5V 0.2 ~ 5V 0.2 ~ 5V
Input Sensitivity (amp out) 0.4 ~ 10V 0.4 ~ 10V 0.4 ~ 10V
Max. Current Consumption (4Ω

) 50 amps 50 amps 25 amps

CHANNELFLEX CROSSOVER

High-Pass

12dB/octave

50 ~ 200Hz (Front)

50 ~ 200Hz 120Hz

Frequency Range 120Hz (Rear)
Low-Pass

12dB/octave 50 ~ 200Hz (Subwoofer) 90Hz (Fixed) 50 ~ 200Hz

Frequency Range
Bass Boost (45Hz) — 0 ~ 9dB ON/OFF 9dB
Subsonic Frequency Range 12dB/octave 20Hz 20Hz 20Hz
Dimensions (W × H × D) 15.75˝ × 2.04˝ × 10.82˝ 10.82˝ × 1.97˝ × 10.82˝ 8.85˝ × 1.97˝ × 10.82˝

Designed, engineered and made in the U.S.A.

HIGH PASS

0

+ 9

–12

– 6

20 2005045 120 20k1k 10k

BASS BOOST

ON/OFF

0

+ 9

–12

– 6

20 2005045 120 20k1k 10k

0

+ 9

–12

– 6

20 2005045 120 20k1k 10k

LOW PASS

EA2212

2/1 Channel Power Amplifier

with ChannelFlex Crossover plus Subsonic Filter

210W

11

BP1502

Premium Amplifier Bridge

1902

Premium Amplifier Bridge

FUJITSU TEN LIMITED

FUJITSU TEN LIMITED

Contact: FUJITSU TEN CORP

Contact: FUJITSU TEN CORP

. OF AMERICA

. OF AMERICA

19600 S

0 S

o. Vermont A

ermont A

venue

venue

, Torrance

orrance

, CA 9

, CA 9

0502

502

Call: 800-55-ECLIPSE www

Call: 800-55-ECLIPSE www

.eclipse-web.com

.eclipse-web.com

FUJITSU TEN LIMITED
Contact: FUJITSU TEN CORP. OF AMERICA

19600 So. Vermont Avenue, Torrance, CA 90502

Call: 800-55-ECLIPSE www.eclipse-web.com

2003/3

2003/3

·E-0031

E-0031

·60 (HCSG) Pr

60 (HCSG) Pr

inted in J

inted in J

apan

apan

2003/3·E-0031·60 (HCSG) Printed in Japan