Fujitsu B17-5 ECO, B19-5 ECO User Manual

Display

B17-5 ECO/B19-5 ECO

Operating Manual

English

Do you have ...

... any technical questions or problems?

Please contact:

• our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the contact details on our website at: "

• your sales partner

• your sales ofﬁce

The latest information about our produ cts, useful tips, updates etc. is available on our website: "

http://ts.fujitsu.com/support/"

http://ts.fujitsu.com/support/" )

Published by

Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany

Contact

http://ts.fujitsu.com/support

All rights reserved, including intellectual property rights. Technical data subject to modifi cations and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded. Designations may be trademarks and/or copyrights of the respective manufacturer, the use of which by third parties for their own purposes may infringe the rights of such owner. For further information see http://ts.fujitsu.com/terms_of_use.html

FUJITSU B17-5 ECO / B19-5 ECO

Operating Manual

Your LCD screen... 1

Important notes

Getting started 7

Operation 14

Troubleshooting

Notes regardi 13406-2 standard

Technical speciﬁcation

ng the DIN EN ISO

VESA, DDC and DPMS are registered trademarks of the Video Electronics Standards Association.

Offenders will be liable for damages.

Subject to availability and technical modiﬁcations.

No liability for content or printing errors.

Contents

YourLCD screen... ..................................................................... 1

Target group ............................................................................ 1

Further information ...................................................................... 2

Notational conventions .................................................................. 2

Importantnotes ........................................................................ 3

Safety instructions ...................................................................... 3

Powercable ............................................................................ 4

Transporting the devic

Cleaning the device ..................................................................... 4

CE marking ............................................................................ 5

Energy Star ............................................................................ 5

Disposal and recycli

Getting started ......................................................................... 7

Unpacking and checking the delivery . . ................................................... 7

Setting upthe device .................................................................... 7

Setting up an ergonomic video workstation ............................................ 8

Adjustingthe height ................................................................. 10

Adjustingthe inclination .............................................................. 10

Adjustingthe rotation ................................................................ 10

Adjustingportrait format ............................................................. 10

Removing monitor base .............................................................. 11

Connecting the device ................................................................... 12

Connecting cables to the monitor . . ................................................... 12

Connecting cables to the computer ................................................... 13

Operation .............................................................................. 14

Switching th Notes on pow Changing th

Troubleshooting ....................................................................... 23

Notes re

Technical speciﬁcation ................................................................. 26

VESA-DDC-compatible VGA interface . ................................................... 27

Preset operating modes . . . . . . ........................................................... 27

SUB Dport ............................................................................. 28

DVI-Dport .............................................................................. 29

edeviceon andoff ..........................................................

emonitor settings ............................................................

Changing t Changing t

garding the DIN E N ISO 13406-2 standard . . ....................................

Most frequent operating modes ....................................................... 27

e ..................................................................

ng ..................................................................

er management ............................................................

he monitor settings with the buttons of the control panel . .....................

he monitorsettings using the OSDmenu ....................................

14 15 16 16 17

A26361-K1317-Z220-1-7619, edition 2

Contents

A26361-K1317-Z220-1-7619, edition 2

Your LCD screen ...

Your LCD screen...

has a whole range of useful f eature s and functions, e.g.:

• TFT display (Thin Film Transistor; active matrix)

• minimal space requirements tha

• optimum ergonomic characteristics (totally distortion-free, excellent picture deﬁnition and colour purity right into the corners)

• high degree of brightness and g

• high resolution (1280 x 1024)

• presentation of up to 16.7 milli

• automatic scanning of horizontal frequencies from 30 to 83 kHz and refresh rates (vertical frequencies) from 55 to 76 Hz (absolutely ﬂicker-free)

• digital screen controller with m

• freely adjustable colour alignment for matching the screen colours to the colours of various input and output devices

• convenient operation via integ

• VESA-DDC compatibility

• VESA-FPMPMI compatibility (Fla Mounting device for swivel arm an

• Plug&Play capability

• power management for reducing p

• Compliance with the reco mmendations according to TCO

• the monitor fulﬁlls all GS ("Gepr

This operating manual contains important information you require to start up and run your LCD monitor.

A graphics card (display adapter) with VGA interface or a digital display adapter with DVI interface is required to control the LCD monitor. The monitor processes the da ta supplied to it by the display adapter. The display adapter or the associated driver software is responsible for setting the modes (resolution and refresh rat e).

When putting the monitor into operation for the ﬁrst time, the screen display should be optimally adapted to the display adapter used and adjusted in accordance with your needs (see chapter "

Changing the monitor settings", Page 16.

nks to slim casing

ood contrast

on colours (in conjunction with an appropriate display adapter)

icroprocessor for sto ring 28 different display modes

rated OSD (On-Screen-display) menu

t Panel Monitor Physical Mounting Interface) –

d wall bracket

ower consumption when the computer is not in use

üfte Sicherheit", Certiﬁed Security) requirements.

Target group

You don’t need to be an "expert the safety information given

In the event of any problems oc

A26361-K1317-Z220-1-7619, edition 2 1

" to perform the operations described here. However, please observe

in the operating instructions for the computer and in this manual.

curring, please contact your sales outlet or our Help Desk.

Your LCD screen...

Further information

Details of how you set the resolution and refresh rate are provided in the documentation for your display adapter and the associated driver software.

For ergonomic reasons, a screen resolution of 1280 x 1024 pixels is recommended.

Because of the technology used (active matrix) an LCD monitor p rovides a totally ﬂicker-free picture even with a refresh rate of 60 Hz.

Notational conventions

Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings.

Indicates important information for the proper use of the device.

►



This font

"This font"

Abc

This font

Indicates an activity that must be performed Indicates a result

indicates data entered using the keyboard in a program dialogue or command line, e.g. your password ((Name123) or a command used to start a program (start.exe)

indicates information that is displayed on the screen by a program, e.g.:

Installation is complete.

indicates

• terms and texts used in a software interface, e.g.: Click on Save

• names of programs or ﬁles, e.g. Windows or setup.exe. indicates

• cross-references to another section, e.g. "Safety information"

• cross-references to an external source, e.g. a web address: For more information, go to"

• Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual

indicates a key on the keyboard, e.g: indicates terms and texts that are emphasised or highlighted, e.g.: Do

not switch off the device

http://ts.fujitsu.com"

F10

2 A26361-K1317-Z220-1-7619, edition 2

Important notes

ImportantnotesNotes

In this chapter you will ﬁ nd information regarding safety which it is essential to take note of when working with your device.

Safety instructions

This device complies with the re including electronic ofﬁce ma questions, contact your sales

• The display surface of the devi be careful with the display sur

• If the device is brought into the installation site from a cold environment, condensation can form. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site.

• When installing and operatin conditions in Chapter " Chapter "

• To ensure sufﬁcient ventilation, the air inlet and outlet openings of the device must be kept clear.

• The device automatically set Make sure that the local mains

• Ensure that the power socket on the device and the mains outlet are freely accessible.

• The ON/OFF switch does not di fully from the mains supply,

• The device is equipped with a power cable that complies with safety standards.

• Use the supplied power cable o

• Lay the cables in such a way that they do not create a hazard (danger of tripping) and cannot be damaged. When connecting the device, observe the relevant notes in chapter "

• No data transfer cables shou

• Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the device (danger of electric shock, short circuit).

• The device is not waterproof ! it from spray water (rain, se

• In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the device, disconnect the power plug and contact your sales outlet or our Help Desk.

• Repairs to the device must o and incorrect repair may gr

• Only use the screen resolution settings and refresh rates speciﬁed in Chapter

Technical speciﬁcati on", Page 26. O therwise you may damage the device. If you

are in any doubt, contact your sales outlet or our Help Desk.

• Use a screen saver with movi your monitor to prevent sti

• If you operate the device with the swivel arm or wall bracket, it must not be turned by 180°.

Setting up an ergon

Connecting the device", Page 12.

levant safety regulations for data processing equipment,

chines for use in an ofﬁce environment. If you have any

outlet or our Help Desk.

ce is sensitive to pressure and scratches. You should therefore

face in order to avoid lasting damage (scratches).

g the device, please observe the notes on environmental

nical speciﬁcation", Page 26 as well as the instructions in

Tech

omic video workstation", Page 8.

s itself to the correct voltage within the range from 100 V to 240 V.

voltage is neither higher nor lower than this range.

sconnect the monitor from the mains voltage. To disconnect

disconnect the power plug from the socket.

nly.

ld be connected or disconnected during a thunderstorm.

Never immerse the device in water and protect

a water).

nly be performed by qualiﬁed technicians. Unauthorised opening

eatly endanger the user (electric shock, ﬁre risk).

ng images and activate the power management for

ll images from "burning in".

A26361-K1317-Z220-1-7619, edition 2 3

Important notes

• The device must only be operated in landscape mode (0°) and portrait mode (90°). The control buttons are located in the middle of the bottom of the monitor in landscape mode (0°) and at the left-hand side of the monitor in portrait mode (90°).

• Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it.

• We recommend that you place your device on a durable, non-slip surface. In view of the many different ﬁnishes and varnishes used on furniture, it is possible that the feet of the device may mark the surface they stand on.

• To ensure sufﬁcient ventilation, the air supply and air outlet openings of the monitor must never be blocked.

Power cable

Use the supplied power cable only.

Use the following guidelines if it is necessary to replace the original cable set.

• The female/male receptacles of the cord set must meet I EC 60320/CEE-22 requirements.

• The cable has to be HAR-certiﬁed or VDE-certiﬁed. The mark HAR or VDE will appear on the outer sheath.

• For devices which are mounted on a desk or table, type SVT or SJT cab le sets may be used. For devices which sit on the ﬂoor, only SJT type cable sets may be used.

• The cable set must be selected according to the rated current for your device.

• If necessary, replace the original power cable with a regular grounded 3-core mains lead.

Transporting the device

Device,TransportationRetransportation

Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jo lts, to the new site.

Do not unpack them until all transportation manoeuvres are completed.

If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site.

Cleaning the device

Switch off the device and unplug the power plug.

Do not clean any interior parts yourself, leave this job to a service technician.

Do not use any cleaning agents that contain abrasives or may co rrod e plastic.

Ensure that no liquid enters the device.

The display surface of the device is sensitive to pressure and scratches. Clean it only using a soft, slightly moistened cloth.

The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out.

4 A26361-K1317-Z220-1-7619, edition 2

+ 25 hidden pages