ERROR DETECTION
1.
If an error occurs, an error icon appears on the “Monitor mode screen”.
Touch the [Status] button. The “Status” screen is displayed.
2.
Touch the [Error Information] button. The “Error Information” screen is displayed.
(When there are no errors, the [Error Information] will not be displayed.)
3.
Double-digit numbers correspond to the error code in the table next page.
Touch the [Nex t page] (or [Previous page]) to switch to the other connected indoor units.
1. 2. 3.
Error code Contents
CC.1 Sensor error
Triple-digit error code means the error of remote control itself.
C2.1 Transmission PCB error
12.1 Wired remote control communication error
12.3 Number excess of device in wired remote control system
12.4 Wired remote control system start- up error
26.4 Address duplication in wired remote control system
26.5 Address setting error in wired remote control system
15.4 Data acquisition error
Troubleshooting at the remote control LCD
Status
Air Flow Direction
VT
Off
1
Economy
Individual
Page 1/ 4
Monitor
Next
Page
Error
Information
UTY-RNRYZ1 (2-wire type)
Error icon
Double-digit numbers are corresponding to the
error code for the indoor unit or outdoor unit.
Touch to switch to the other
indoor unit information.
Error History (Triple-digit)
(1) Touch the [Error History] on
the “Maintenance” screen.
Back
Next
Page
Page 1/ 3
Maintenance
Error History
Setting
Status List
Version
Filter Sign
Reset
(2) “Error Histor y” screen is displayed. When the screen
has multiple pages, they can be switched by touching
the [Next Page] or [Previous Page].
11:00
2:53
8:53
11:00
11:00
11:00
1
2015/ 8/ 1 002-01 141
2
2015/ 7/30 002-02 143
3
2015/ 7/25 002-02 143
4
2015/ 7/22 002-01 141
5
2015/ 7/22 002-01 141
6
2015/ 7/21 002-01 141
Page 1/ 2
Error History
No. Date Time Address Code
Back
Next
Page
Erase
All
AM
AM
AM
AM
AM
AM
11:00
2:53
8:53
11:00
11:00
7
2015/ 7/ 1 002-01 141
8
2015/ 7/10 002-02 143
9
2015/ 7/ 5 002-02 143
10
2015/ 7/ 2 002-01 141
11
2015/ 7/ 2 002-01 141
Page 2/ 2
Error History
No. Date Time Address Code
Back
Previous
Page
Erase
All
AM
AM
AM
AM
AM
(3) When the [Back] is touched after verifi cation, the display
returns to the “Maintenance” screen.
Erase the Error History
2015.06.12 8
(1) Touch the [Erase All] on the “Error History” screen.
(2) A verifi cation screen is displayed. When the [Yes] is
touched after the histor y is cleared, the display returns
to the “Error History” screen.
)2( )1(
11:00
2:53
8:53
11:00
11:00
11:00
1
2015/ 8/ 1 002-01 141
2
2015/ 7/30 002-02 143
3
2015/ 7/25 002-02 143
4
2015/ 7/22 002-01 141
5
2015/ 7/22 002-01 141
6
2015/ 7/21 002-01 141
Page 1/ 2
Error History
No. Date Time Address Code
Back
Next
Page
Erase
All
AM
AM
AM
AM
AM
AM
Delete entire error history?
Error History
No Yes