CONNECT2AIR WLAN
AP-500RP AccessPoint
Low cost / high performance AccessPoint
The CONNECT2AIR AP-500RP AccessPoint is a cost-effective, fully featured wireless router
that extends the range of wired Ethernet networks. The CONNECT2AIR AP-500RP delivers the
freedom to expand and work more efficiently.
High Performance AccessPoint
The high performance CONNECT2AIR AP-500RP extends the range of your cabled Ethernet
network and provides easy network access to mobile users. Difficult to wire locations are now easy
accessible. Network management through the Web interface combined with SNMP makes it easy to
embed the AP-500RP in a small office or home environment.
Multifunctional and with many features
The CONNECT2AIR WLAN AP-500RP is a multi-functional Broadband Wireless SOHO Router. It
provides excellent all-in-one networking solutions to surf the Internet and share the office resources.
Its efficiency boosting features will increase effectiveness and save cost in any working environment.
It includes the following functions:
§ High speed wireless LAN connection:
11Mbit/s data rate by incorporating Direct
Sequence Spread Spectrum (DSSS)
§ IEEE 802.11b compatible:
allowing interoperability among multiple
vendors
§ 64-bit or 128-bit WEP encryption
§ 10BaseT WAN interface:
to connect to DSL or Cable modem for
broadband Internet access
§ 2 port Fast Ethernet switch:
10/100 Mbit/s auto-sensing
§ Parallel printer port:
embedded printer server to allow all of
the connected Devices (wireless or
wired) to share a single printer
§ Asynchronous RS-232 serial port:
to connect an Analog or ISDN modem for
Internet access
§ Built-in NAT function:
allow multiple PCs and devices to share
one Internet connection
§ VPN support: PPTP/IPSec pass-through
§ Built-in firewall to protect your Intranet
§ Browser-based interface for
configuration and management:
OS independent, easy-to-use for quick
installation and management of your
device
§ Multi language support:
Web Interface supports German, English,
French, Italian and Spanish
www.fujitsu-siemens.com
Data Sheet CONNECT2AIR WLAN AP-500RP Issue October 2002
Standard features
§ Conform to IEEE 802.11 and IEEE 802.11b
§ 64 / 128-bit key RC4 encryption
§ MAC Address Control
§ Web-based management
§ Powerful performance for the most demanding
network applications such as Radio Streaming
§ Enhanced roaming across disparate locations and
infrastructures
§ Integrated DHCP Server
§ Supported ISP connection types: PPPoE, PPTP,
Dial-up via Analog/ISDN modem, fix or dynamic IP
Interfaces
§ One RJ-45 port for 10Mbit/s Ethernet WAN
connection
§ Auto-sensing 2-port switch for 10/100Mbit/s
Ethernet LAN connection
§ One serial port for PSTN/ISDN dial-up connection
and console configuration
§ One DB-25 parallel port for printer server
§ High speed wireless LAN (IEEE 802.11b DSSS)
Environmental specifications
Temperature Humidity
Operating
Storage
0°C to 50°C
-10°C to 60°C
95% (non condensing)
95% (non condensing)
Barometric pressure 740 hPa to 1050 hPa
Hardware specifications
Processor RDC 8822
Memory 512Kbit DRAM
512Kbit Flash
LAN 2 x RJ-45 LAN / 10/100 Mbit/s
auto-sensing
WAN 1 x RJ-45 WAN / 10 Mbps WAN
Printer port 1 x IEEE1284 DB-25 (parallel)
COM port 1 x DB-9 RS-232C (serial)
Radio characteristics
Frequency Range 2412 MHz to 2462 MHz (ISM)
Channel Frequencies 11 freely selectable channels
Antenna System Diversity antenna
Bit Rate 11 Mbit/s, 5.5 Mbit/s, 2 Mbit/s,
1 Mbit/s (Automatic Rate
Selection)
Output Power 16 dBm (max.)
Typical Range * 11 Mbit/s 1 Mbit/s
open environment 100 m
closed environment 35 m
300 m
100 m
Receiver sensitivity PER < 8% -81 dBm -92 dBm
Typical throughput (excluding
5 Mbit/s 0.8 Mbit/s
headers, etc) using TCP/IP
* Above listed throughput and range values are typical
characteristics and depend on positioning of the
Access Point, Clients and environmental influences
and cannot be guaranteed.
Additional features
§ Seamless roaming within the 802.11b WLAN
infrastructure
§ Provide 10Base-T WAN interface to connect with
DSL or Cable modem for broadband Internet access
§ Asynchronous port for backup routes when the
broadband modem fails or is disconnected
§ Built-in NAT function: allows multiple PCs and
devices to share one Internet connection
§ VPN support: PPTP / IPSec pass-through
§ Built-in firewall to protect your Intranet
§ Access limitation: allow or deny every single
wireless device to access the WLAN or LAN
§ Browser-based interface for configuration and
management: OS independent, easy-to-use for
quick installation and management of the device
§ Easy to upgrade: using Web, Windows application,
or FTP to upgrade new version of firmware
§ Built-in printer server: dedicating a personal
computer as print server is not needed
§ Roaming: AP can be linked via LAN
(Distribution system)
Configuration and management
Web-based Utilities
TFTP support
HTTP server for web-based management
Multilanguage support: German, English, French, Italian
and Spanish
LED displays
Power Power Indication
M1 System Status AP-500RP
WAN WAN port activity
WLAN Wireless activity
Link/Act. (1, 2) Link status of corresponding LAN port
10/100 (1, 2) Data Rate of corresponding LAN port
System requirements
PC with 802.11b WLAN Card or network card
Includes
AP-500RP AccessPoint
Power cord
Quick Installation Guide
External Power supply, Input 100/240 V AC, 50/60 Hz
CD with software and documentation
Cat. 5 patch cord
Physical specifications
Dimensions: 220 x 142.5 x 38 mm
Weight: 510 g
Supported Operating Systems
AccessPoint configuration: Win 95, Win 98 (SE),
Win ME, Win NT, Win 2000, Win XP, Linux, Macintosh
Printer Server SW: Win 95, Win 98 (SE), Win ME,
Win NT, Win 2000, Win XP
Warranty
2 years
Order code
S26391-F2515-L500
Published by
Fujitsu Siemens Computers
http://www.fujitsu-siemens.ch
All rights, including rights created by patent grant or registration of a utility
model or design, are reserved. Delivery subject to availability; right of
technical modifications reserved.
All hardware and software names used are trade names or trademarks of
their respective manufacturers.
Copyright Ó Fujitsu Siemens Computers, 11/2002
Company stamp