Fujitsu ASYG07KMTA, ASYG09KMTA, ASYG14KMTA, ASYG12KMTA, AOYG07KMTA Design & Technical Manual

...

Download

AIR CONDITIONER

Wall mounted type

DESIGN & TECHNICAL MANUAL

INDOOR

ASYG07KMTA ASYG09KMTA ASYG12KMTA ASYG14KMTA

OUTDOOR

AOYG07KMTA AOYG09KMTA AOYG12KMTA

AOYG14KMTA

DR_AS066EF_01

2018.02.20

Notices:

• Product specifications and design are subject to change without notice for future improvement.

• For further details, please check with our authorized dealer.

Trademarks

FGLair™ is trademark of Fujitsu General Limited in the United States, other countries or both.

Google Play™ is trademark of Google Inc.

App Store® is a service mark of Apple Inc., registered in the U.S. and other countries.

CONTENTS

Part 1. INDOOR UNIT....................................................................... 1

1. Specifications............................................................................................2

2. Dimensions................................................................................................4

2-1. Models: ASYG07KMTA, ASYG09KMTA, ASYG12KMTA, and ASYG14KMTA .......... 4

3. Wiring diagrams ........................................................................................6

3-1. Models: ASYG07KMTA, ASYG09KMTA, ASYG12KMTA, and ASYG14KMTA .......... 6

4. Capacity table............................................................................................7

4-1. Cooling capacity.......................................................................................................... 7

4-2. Heating capacity .........................................................................................................9

5. Fan performance .....................................................................................10

5-1. Air velocity distributions............................................................................................. 10

5-2. Airflow....................................................................................................................... 12

6. Operation noise (sound pressure)......................................................... 16

6-1. Noise level curve....................................................................................................... 16

6-2. Sound level check point............................................................................................ 18

7. Safety devices ......................................................................................... 19

8. External input and output.......................................................................20

8-1. External input............................................................................................................ 20

8-2. External output.......................................................................................................... 23

9. Group connection ...................................................................................25

9-1. Precautions on creating a group connection ............................................................. 25

9-2. Remote controller address setting procedure for wireless remote controllers........... 26

10. Remote controller ...................................................................................27

10-1.Wireless remote controller ....................................................................................... 27

11. Function settings ....................................................................................29

11-1.Function settings by using remote controller............................................................ 29

11-2.Custom code setting for wireless remote controller.................................................. 35

12. Accessories.............................................................................................36

12-1.Models: ASYG07KMTA, ASYG09KMTA, ASYG12KMTA, and ASYG14KMTA ....... 36

13. Optional parts..........................................................................................37

13-1.Controllers ............................................................................................................... 37

13-2.Others...................................................................................................................... 37

Part 2. OUTDOOR UNIT................................................................. 39

1. Specifications..........................................................................................40

2. Dimensions..............................................................................................41

2-1. Models: AOYG07KMTA, AOYG09KMTA, and AOYG12KMTA................................. 41

2-2. Model: AOYG14KMTA.............................................................................................. 42

3. Installation space ....................................................................................43

3-1. Models: AOYG07KMTA, AOYG09KMTA, AOYG12KMTA, and AOYG14KMTA ...... 43

4. Refrigerant circuit ...................................................................................46

4-1. Models: AOYG07KMTA, AOYG09KMTA, and AOYG12KMTA................................. 46

4-2. Model: AOYG14KMTA.............................................................................................. 47

5. Wiring diagrams ......................................................................................48

5-1. Models: AOYG07KMTA, AOYG09KMTA, AOYG12KMTA, and AOYG14KMTA ...... 48

6. Capacity compensation rate for pipe length and height difference....49

6-1. Models: AOYG07KMTA and AOYG09KMTA............................................................ 49

6-2. Model: AOYG12KMTA.............................................................................................. 50

6-3. Model: AOYG14KMTA.............................................................................................. 50

7. Additional charge calculation ................................................................51

7-1. Models: AOYG07KMTA and AOYG09KMTA............................................................ 51

7-2. Model: AOYG12KMTA.............................................................................................. 51

7-3. Model: AOYG14KMTA.............................................................................................. 51

8. Airflow......................................................................................................52

8-1. Model: AOYG07KMTA.............................................................................................. 52

8-2. Model: AOYG09KMTA.............................................................................................. 52

8-3. Model: AOYG12KMTA.............................................................................................. 52

8-4. Model: AOYG14KMTA.............................................................................................. 53

9. Operation noise (sound pressure)......................................................... 54

9-1. Noise level curve....................................................................................................... 54

9-2. Sound level check point............................................................................................ 56

10. Electrical characteristics........................................................................57

11. Safety devices ......................................................................................... 58

12. Accessories.............................................................................................59

12-1.Models: AOYG07KMTA, AOYG09KMTA, AOYG12KMTA, and AOYG14KMTA ..... 59

CONTENTS (continued)

Part 1. INDOOR UNIT

WALL MOUNTED TYPE:

ASYG07KMTA ASYG09KMTA ASYG12KMTA ASYG14KMTA

1. Specifications

Type

Wall mounted

Inverter heat pump

Model name ASYG07KMTA ASYG09KMTA ASYG12KMTA ASYG14KMTA

Power supply 230 V ~ 50 Hz Available voltage range 198—264 V

Capacity

Cooling

Rated

kW 2.00 2.50 3.40 4.20

Btu/h 6,800 8,500 11,600 14,300

Min.—Max.

kW 0.9—3.0 0.9—3.2 0.9—3.9 0.9—4.4

Btu/h 3,100—10,200 3,100—10,900 3,100—13,300 3,100—15,000

Heating

Rated

kW 2.50 2.80 4.00 5.40

Btu/h 8,500 9,500 13,600 18,400

Min.—Max.

kW 0.9—3.4 0.9—4.0 0.9—5.3 0.9—6.0

Btu/h 3,100—11,600 3,100—13,600 3,100—18,000 3,100—20,500

Input power

Cooling

Rated

0.450 0.630 0.935 1.220

Min.—Max. 0.25—1.17 0.25—1.21 0.25—1.27 0.25—1.40

Heating

Rated 0.555 0.620 0.960 1.410 Min.—Max. 0.25—1.21 0.25—1.26 0.25—1.52 0.25—1.73

Fan

HIGH

22.1 26.5 26.5 33.6 MED 15.1 16.0 16.0 20.0 LOW 10.0 10.0 10.0 11.8 QUIET 6.4 6.4 6.4 7.1

Current

Cooling

Rated A

2.6 3.4 4.8 5.8

Heating 3.0 3.4 5.1 6.8

EER Cooling

kW/kW

4.43 3.97 3.65 3.44

COP Heating 4.52 4.52 4.17 3.83 Sensible capacity Cooling kW 1.2 1.6 2.2 3.2

Power factor

Cooling

75 81 88 88

Heating 80 79 87 87

Moisture removal L/h (pints/h) 1.0 (1.76) 1.3 (2.29) 1.8 (3.17) 2.1 (3.70)

Maximum operating current *1

Cooling

6.5 6.5 6.5 6.5

Heating 9.0 9.0 9.0 9.0

Fan

Airflow rate

Cooling

HIGH

m3/h

650 700 700 770 MED 540 560 560 600 LOW 430 430 430 450 QUIET 270 270 270 280

Heating

HIGH 720 750 770 800 MED 580 610 640 660 LOW 460 470 520 520 QUIET 330 330 330 340

Type × Q'ty Cross flow fan × 1 Motor output W 22 24 27 30

Sound pressure level *2

Cooling

HIGH

dB (A)

38 40 40 43 MED 33 34 35 36 LOW 29 29 30 30 QUIET 20 20 20 20

Heating

HIGH 41 42 42 44 MED 35 36 38 39 LOW 31 31 33 33 QUIET 22 22 22 24

Heat exchanger type

Dimensions (H × W × D)

Main1: 210 × 670 × 26.6

Main2: 112 × 670 × 20

Main1: 210 × 670 ×

26.6

Main2: 112 × 670 × 20

Sub: 84 × 670 × 13.3

Fin pitch Man1: 1.2, Main2: 1.1

Man1: 1.2, Main2: 1.1,

Sub: 1.4

Rows × Stages Main1: 2 × 10, Main2: 2 × 7

Main1: 2 × 10, Main2: 2

× 7, Sub: 1 × 4 Pipe type Copper tube Fin type Aluminum

Enclosure

Material Polystyrene

Color

White + Pearl white (painted)

Approximate color of Munsell N 9.25/

Dimensions (H × W × D)

Net

270 × 834 × 222

Gross 277 × 914 × 332

Weight

Net

10.0

Gross 12.5 13.0

Connection pipe

Size

Liquid

mm (in)

Ø 6.35 (Ø 1/4)

Gas Ø 9.52 (Ø 3/8)

Method Flare

Drain hose

Material PP+LLDPE Size mm Ø 13.8 (I.D.), Ø 15.8 to Ø 16.7 (O.D.)

Operation range

Cooling

°C 18 to 32

%RH 80 or less

Heating °C 16 to 30

Remote controller type

Wireless (Wired, Mobile app*3 [FGLair™] [option])

NOTES:

• Specifications are based on the following conditions: – Cooling: Indoor temperature of 27 °CDB/19 °CWB, and outdoor temperature of 35 °CDB/24 °CWB. – Heating: Indoor temperature of 20 °CDB/15 °CWB, and outdoor temperature of 7 °CDB/6 °CWB. – Pipe length: 5 m, Height difference: 0 m. (Between outdoor unit and indoor unit.)

• Protective function might work when using it outside the operation range.

• *1: Maximum current is maximum value when operated within the operation range.

• *2: Sound pressure level:

– Measured values in manufacturer’s anechoic chamber. – Because of the surrounding sound environment, the sound levels measured in actual installation conditions might be higher than the specified values here.

• *3: Available on Google Play™ store or on App Store®. Optional WLAN adapter is also required. For details, refer to the setting manual.

- 2 -

WALL MOUNTED

ASYG07-14KMTA

Specifications for Lot10

Model name ASYG07KMTA ASYG09KMTA ASYG12KMTA ASYG14KMTA

Energy efficiency class

Cooling

Heating (Average)

Pdesign

Cooling

2.0 (35 °C) 2.5 (35 °C) 3.4 (35 °C) 4.2 (35 °C)

Heating (Average) 2.3 (-10 °C) 2.4 (-10 °C) 2.5 (-10 °C) 4.0 (-10 °C)

SEER Cooling

kWh/kWh

7.4 7.4 7.3 6.9

SCOP Heating (Average) 4.1 4.1 4.4 4.1

Annual energy consumption

QCE

kWh/a

95 118 163 213

QHE (Average) 785 819 795 1,367

Sound power level

Cooling

HIGH dB (A)

54 55 55 57

Heating 56 57 58 59

- 3 -

WALL MOUNTED

ASYG07-14KMTA

2. Dimensions

2-1. Models: ASYG07KMTA, ASYG09KMTA, ASYG12KMTA,

and ASYG14KMTA

Unit: mm

(834)

Outline of indoor unit

327

273

273 54

(270)

9.5220

for pipe inlet Ø65 for pipe inlet Ø65

182 182

35634648 84

63 63

834

270

222

3.0

- 4 -

WALL MOUNTED

ASYG07-14KMTA

Installation space requirement

Provide sufficient installation space for product safety.

Unit: mm

Wall hook bracket

Outline of the indoor unit

50 or more

67 or more

The flare connection part should be installed outdoors.

40 or more

70 or more

107 or more

1,500 or more

1,800 or more

183 or more

- 5 -

WALL MOUNTED

ASYG07-14KMTA

3. Wiring diagrams

3-1. Models: ASYG07KMTA, ASYG09KMTA, ASYG12KMTA,

and ASYG14KMTA

- 6 -

WALL MOUNTED

ASYG07-14KMTA

4. Capacity table

Capacity tables show each of following values calculated based on the outdoor temperature and the indoor temperature, under given Airflow Rate (AFR):

For cooling capacity: Total Capacity (TC), Sensible Heat Capacity (SHC), and Input Power (IP) For heating capacity: Total Capacity (TC) and Input Power (IP)

4-1. Cooling capacity

Model: ASYG07KMTA

AFR

m3/h

650

Indoor temperature °CDB 18 21 23 25 27 29 32 °CWB 12 15 16 18 19 21 23

Outdoor temperature

°CDB

TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP

kW kW kW kW kW kW kW

-10 2.72 2.51 0.35 2.96 2.60 0.35 3.12 2.67 0.34 3.28 2.73 0.34 3.35 2.81 0.34 3.59 2.86 0.34 3.83 2.95 0.33 0 2.65 2.45 0.39 2.89 2.54 0.39 3.04 2.60 0.39 3.19 2.66 0.38 3.26 2.74 0.39 3.50 2.79 0.38 3.73 2.88 0.37 5 2.51 2.38 0.53 2.72 2.47 0.52 2.87 2.53 0.52 3.01 2.59 0.52 3.08 2.67 0.52 3.31 2.72 0.51 3.52 2.81 0.50

10 2.58 2.36 0.50 2.80 2.45 0.49 2.95 2.51 0.49 3.10 2.57 0.49 3.17 2.64 0.49 3.40 2.69 0.48 3.62 2.78 0.47 15 2.52 2.37 0.49 2.74 2.46 0.49 2.89 2.52 0.49 3.03 2.58 0.48 3.10 2.66 0.49 3.32 2.70 0.48 3.54 2.79 0.47 20 2.45 2.36 0.50 2.66 2.45 0.50 2.80 2.51 0.50 2.95 2.57 0.49 3.01 2.65 0.50 3.23 2.69 0.49 3.44 2.78 0.48 25 2.36 2.34 0.53 2.57 2.43 0.53 2.70 2.49 0.52 2.84 2.55 0.52 2.90 2.62 0.52 3.11 2.66 0.51 3.32 2.75 0.51 30 2.26 2.30 0.57 2.45 2.38 0.57 2.59 2.44 0.56 2.72 2.50 0.56 2.78 2.57 0.56 2.98 2.62 0.55 3.17 2.70 0.55 35 2.14 2.24 0.63 2.33 2.32 0.62 2.45 2.38 0.62 2.57 2.43 0.62 2.63 2.50 0.62 2.82 2.55 0.61 3.01 2.63 0.60 40 2.00 2.16 0.70 2.18 2.24 0.70 2.30 2.30 0.69 2.41 2.35 0.69 2.46 2.42 0.69 2.64 2.46 0.68 2.82 2.54 0.67 46 1.82 2.04 0.81 1.98 2.12 0.80 2.09 2.17 0.80 2.19 2.22 0.79 2.24 2.29 0.80 2.40 2.33 0.78 2.56 2.41 0.77

Model: ASYG09KMTA

AFR

m3/h

700

Indoor temperature °CDB 18 21 23 25 27 29 32 °CWB 12 15 16 18 19 21 23

Outdoor temperature

°CDB

TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP

kW kW kW kW kW kW kW

-10 2.79 2.57 0.35 3.04 2.67 0.35 3.20 2.73 0.35 3.36 2.80 0.34 3.43 2.88 0.35 3.68 2.93 0.34 3.93 3.03 0.34 0 2.72 2.51 0.40 2.96 2.60 0.39 3.12 2.67 0.39 3.27 2.73 0.39 3.35 2.81 0.39 3.59 2.86 0.38 3.83 2.95 0.38 5 2.57 2.44 0.53 2.79 2.54 0.53 2.94 2.60 0.52 3.09 2.66 0.52 3.16 2.74 0.52 3.39 2.78 0.51 3.61 2.88 0.51

10 2.64 2.42 0.50 2.87 2.51 0.50 3.02 2.57 0.49 3.18 2.63 0.49 3.25 2.71 0.49 3.48 2.76 0.48 3.71 2.85 0.48 15 2.58 2.43 0.50 2.81 2.52 0.49 2.96 2.58 0.49 3.11 2.65 0.49 3.18 2.72 0.49 3.41 2.77 0.48 3.63 2.86 0.47 20 2.51 2.42 0.51 2.73 2.51 0.50 2.88 2.58 0.50 3.02 2.64 0.50 3.09 2.71 0.50 3.31 2.76 0.49 3.53 2.85 0.49 25 2.42 2.40 0.54 2.63 2.49 0.53 2.77 2.55 0.53 2.91 2.61 0.52 2.98 2.68 0.53 3.19 2.73 0.52 3.40 2.82 0.51 30 2.32 2.35 0.58 2.52 2.44 0.57 2.65 2.50 0.57 2.79 2.56 0.56 2.85 2.64 0.57 3.05 2.68 0.56 3.26 2.77 0.55 35 2.19 2.29 0.64 2.38 2.38 0.63 2.51 2.44 0.63 2.64 2.50 0.62 2.70 2.57 0.63 2.89 2.61 0.61 3.08 2.70 0.61 40 2.06 2.21 0.71 2.23 2.30 0.70 2.35 2.35 0.70 2.47 2.41 0.69 2.53 2.48 0.70 2.71 2.52 0.68 2.89 2.61 0.68 46 1.87 2.09 0.82 2.03 2.17 0.81 2.14 2.23 0.80 2.25 2.28 0.80 2.30 2.35 0.80 2.46 2.39 0.79 2.63 2.47 0.78

Model: ASYG12KMTA

AFR

m3/h

700

Indoor temperature °CDB 18 21 23 25 27 29 32 °CWB 12 15 16 18 19 21 23

Outdoor temperature

°CDB

TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP

kW kW kW kW kW kW kW

-10 3.41 2.90 0.48 3.70 2.99 0.48 3.89 3.04 0.48 4.09 3.10 0.48 4.20 3.17 0.47 4.47 3.22 0.47 4.76 3.31 0.47 0 3.18 2.78 0.63 3.45 2.86 0.62 3.63 2.92 0.62 3.81 2.97 0.62 3.92 3.04 0.61 4.17 3.09 0.61 4.44 3.17 0.61 5 3.02 2.70 0.73 3.28 2.78 0.72 3.45 2.84 0.72 3.62 2.90 0.72 3.72 2.96 0.71 3.96 3.01 0.71 4.21 3.09 0.70

10 3.30 2.91 0.55 3.58 3.00 0.54 3.77 3.06 0.54 3.96 3.12 0.54 4.07 3.18 0.53 4.33 3.24 0.53 4.61 3.32 0.53 15 3.23 2.81 0.60 3.50 2.89 0.60 3.68 2.95 0.59 3.87 3.01 0.59 3.98 3.07 0.58 4.23 3.12 0.59 4.50 3.21 0.58 20 3.13 2.72 0.66 3.40 2.80 0.65 3.58 2.86 0.65 3.75 2.91 0.65 3.86 2.97 0.64 4.11 3.02 0.64 4.37 3.10 0.64 25 3.02 2.64 0.72 3.27 2.72 0.72 3.44 2.78 0.71 3.61 2.83 0.71 3.72 2.89 0.70 3.95 2.94 0.70 4.21 3.02 0.70 30 2.88 2.58 0.79 3.13 2.66 0.78 3.29 2.71 0.78 3.45 2.76 0.78 3.55 2.82 0.77 3.78 2.87 0.77 4.02 2.95 0.76 35 2.73 2.53 0.86 2.96 2.61 0.86 3.11 2.66 0.85 3.26 2.71 0.85 3.36 2.77 0.84 3.57 2.82 0.84 3.80 2.89 0.83 40 2.55 2.50 0.94 2.76 2.57 0.93 2.91 2.62 0.93 3.05 2.68 0.92 3.14 2.73 0.91 3.34 2.78 0.92 3.56 2.85 0.91 46 2.31 2.47 1.04 2.51 2.55 1.03 2.64 2.60 1.03 2.77 2.65 1.02 2.85 2.71 1.01 3.03 2.75 1.01 3.22 2.83 1.01

- 7 -

WALL MOUNTED

ASYG07-14KMTA

Model: ASYG14KMTA

AFR

m3/h

770

Indoor temperature °CDB 18 21 23 25 27 29 32 °CWB 12 15 16 18 19 21 23

Outdoor temperature

°CDB

TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP TC SHC IP

kW kW kW kW kW kW kW

-10 3.48 2.99 0.45 3.80 3.10 0.45 4.01 3.17 0.45 4.22 3.24 0.45 4.48 3.30 0.44 4.64 3.39 0.44 4.96 3.49 0.44 0 3.32 2.91 0.60 3.62 3.01 0.60 3.82 3.08 0.59 4.02 3.15 0.59 4.27 3.21 0.58 4.43 3.29 0.59 4.73 3.39 0.58 5 3.24 2.86 0.68 3.53 2.97 0.67 3.73 3.03 0.67 3.93 3.10 0.66 4.17 3.16 0.66 4.32 3.24 0.66 4.61 3.34 0.65

10 3.36 2.91 0.43 3.67 3.01 0.42 3.87 3.08 0.42 4.08 3.15 0.42 4.33 3.21 0.41 4.48 3.29 0.42 4.79 3.40 0.41 15 3.38 2.85 0.53 3.68 2.95 0.53 3.89 3.02 0.53 4.10 3.09 0.52 4.35 3.15 0.52 4.51 3.23 0.52 4.81 3.33 0.51 20 3.35 2.78 0.63 3.66 2.88 0.62 3.86 2.95 0.62 4.06 3.01 0.62 4.31 3.07 0.61 4.47 3.15 0.61 4.78 3.25 0.61 25 3.28 2.69 0.71 3.58 2.79 0.71 3.78 2.86 0.71 3.98 2.92 0.70 4.22 2.97 0.69 4.38 3.05 0.69 4.68 3.15 0.69 30 3.17 2.60 0.79 3.46 2.69 0.78 3.65 2.75 0.78 3.84 2.81 0.78 4.08 2.86 0.77 4.23 2.94 0.77 4.52 3.03 0.76 35 3.01 2.48 0.85 3.29 2.57 0.85 3.47 2.63 0.84 3.66 2.69 0.84 3.88 2.74 0.83 4.02 2.81 0.83 4.30 2.90 0.83 40 2.82 2.36 0.91 3.07 2.44 0.90 3.25 2.50 0.90 3.42 2.55 0.89 3.63 2.60 0.88 3.76 2.67 0.88 4.02 2.75 0.88 46 2.52 2.19 0.96 2.75 2.27 0.95 2.91 2.32 0.95 3.06 2.37 0.94 3.25 2.41 0.93 3.37 2.48 0.93 3.60 2.56 0.93

- 8 -

WALL MOUNTED

ASYG07-14KMTA

4-2. Heating capacity

NOTE: Values mentioned in the table are calculated based on the maximum capacity.

Model: ASYG07KMTA

AFR

m3/h

720

Indoor temperature

16 18 20 22 24

Outdoor temperature

°CDB °CWB

TC IP TC IP TC IP TC IP TC IP

kW kW kW kW kW

-15 -16 1.85 0.95 1.83 0.97 1.81 0.98 1.80 1.02 1.78 1.04

-10 -11 2.22 1.00 2.20 1.02 2.17 1.03 2.16 1.07 2.14 1.10

-5 -7 2.59 1.05 2.57 1.07 2.53 1.09 2.52 1.12 2.50 1.15 0 -2 2.96 1.10 2.93 1.13 2.89 1.14 2.88 1.18 2.86 1.21 5 3 3.33 1.15 3.30 1.18 3.26 1.19 3.24 1.23 3.21 1.26 7 6 3.48 1.17 3.45 1.20 3.40 1.21 3.39 1.25 3.36 1.28

10 8 3.70 1.20 3.67 1.23 3.62 1.24 3.60 1.29 3.57 1.32 15 10 3.68 1.11 3.64 1.14 3.59 1.15 3.58 1.19 3.55 1.22 20 15 3.87 1.06 3.84 1.09 3.78 1.10 3.77 1.14 3.74 1.17 24 18 4.03 1.02 3.99 1.05 3.94 1.06 3.92 1.10 3.89 1.12

Model: ASYG09KMTA

AFR

m3/h

750

Indoor temperature

16 18 20 22 24

Outdoor temperature

°CDB °CWB

TC IP TC IP TC IP TC IP TC IP

kW kW kW kW kW

-15 -16 2.14 0.99 2.13 1.02 2.12 1.02 2.12 1.06 2.11 1.09

-10 -11 2.57 1.04 2.56 1.07 2.55 1.08 2.55 1.12 2.54 1.15

-5 -7 3.00 1.09 2.99 1.12 2.98 1.13 2.97 1.18 2.96 1.20 0 -2 3.43 1.15 3.42 1.17 3.40 1.19 3.40 1.23 3.39 1.26 5 3 3.86 1.20 3.85 1.23 3.83 1.24 3.83 1.29 3.81 1.32 7 6 4.04 1.22 4.02 1.25 4.00 1.26 4.00 1.31 3.98 1.34

10 8 4.29 1.25 4.28 1.28 4.26 1.29 4.25 1.34 4.24 1.37 15 10 4.43 1.26 4.42 1.29 4.39 1.30 4.39 1.35 4.37 1.38 20 15 4.85 1.27 4.83 1.30 4.80 1.31 4.80 1.36 4.78 1.39 24 18 5.18 1.28 5.16 1.31 5.13 1.32 5.13 1.37 5.11 1.40

Model: ASYG12KMTA

AFR

m3/h

770

Indoor temperature

16 18 20 22 24

Outdoor temperature

°CDB °CWB

TC IP TC IP TC IP TC IP TC IP

kW kW kW kW kW

-15 -16 2.88 1.19 2.86 1.22 2.82 1.23 2.81 1.28 2.78 1.31

-10 -11 3.46 1.25 3.43 1.28 3.38 1.30 3.37 1.35 3.34 1.38

-5 -7 4.04 1.32 4.00 1.35 3.94 1.36 3.93 1.41 3.89 1.44 0 -2 4.62 1.38 4.57 1.41 4.51 1.43 4.49 1.48 4.45 1.51 5 3 5.19 1.44 5.15 1.48 5.07 1.49 5.05 1.55 5.01 1.58 7 6 5.42 1.47 5.38 1.50 5.30 1.52 5.28 1.58 5.23 1.61

10 8 5.77 1.51 5.72 1.54 5.64 1.56 5.62 1.62 5.57 1.65 15 10 5.73 1.40 5.68 1.43 5.60 1.45 5.58 1.50 5.53 1.53 20 15 6.04 1.34 5.98 1.37 5.90 1.38 5.88 1.43 5.82 1.47 24 18 6.28 1.29 6.23 1.32 6.14 1.33 6.12 1.38 6.06 1.41

Model: ASYG14KMTA

AFR

m3/h

800

Indoor temperature

16 18 20 22 24

Outdoor temperature

°CDB °CWB

TC IP TC IP TC IP TC IP TC IP

kW kW kW kW kW

-15 -16 3.26 1.36 3.23 1.39 3.19 1.40 3.18 1.45 3.15 1.49

-10 -11 3.92 1.43 3.88 1.46 3.83 1.48 3.81 1.53 3.78 1.57

-5 -7 4.57 1.50 4.53 1.54 4.47 1.55 4.45 1.61 4.41 1.64 0 -2 5.23 1.57 5.18 1.61 5.11 1.63 5.09 1.69 5.04 1.72 5 3 5.88 1.64 5.83 1.68 5.74 1.70 5.72 1.76 5.67 1.80 7 6 6.14 1.67 6.09 1.71 6.00 1.73 5.98 1.79 5.92 1.83

10 8 6.53 1.72 6.48 1.76 6.38 1.77 6.36 1.84 6.30 1.88 15 10 6.49 1.59 6.43 1.63 6.34 1.65 6.32 1.71 6.26 1.75 20 15 6.84 1.52 6.77 1.56 6.68 1.57 6.65 1.63 6.59 1.67 24 18 7.11 1.47 7.05 1.50 6.95 1.52 6.92 1.57 6.86 1.61

- 9 -

WALL MOUNTED

ASYG07-14KMTA

5. Fan performance

5-1. Air velocity distributions

Models: ASYG07KMTA, ASYG09KMTA, and ASYG12KMTA

Measuring conditions

Fan speed Operation mode

HIGH FAN

Top view Vertical airflow direction louver: Up Horizontal airflow direction louver: Center

(m)

-3

-2

-1

0.52.0 1.0

Unit: m/s

(m)

012345678910

Top view Vertical airflow direction louver: Up Horizontal airflow direction louver: Left & Right

2.0

1.0

0.5

Unit: m/s

(m)

-3

-2

-1

012345678910

Side view Vertical airflow direction louver: Up Horizontal airflow direction louver: Center

(m)

012345678910

Unit: m/s

2.0

0.5

1.0

Side view Vertical airflow direction louver: Down Horizontal airflow direction louver: Center

(m)

012345678910

0.50.5

2.0

1.0

Unit: m/s

- 10 -

WALL MOUNTED

ASYG07-14KMTA

Model: ASYG14KMTA

Measuring conditions

Fan speed Operation mode

HIGH FAN

Top view Vertical airflow direction louver: Up Horizontal airflow direction louver: Center

Unit: m/s

(m)

-3

-2

-1

012345678910

0.52.0 1.0

Top view Vertical airflow direction louver: Up Horizontal airflow direction louver: Left & Right

1.0

0.5

2.0

Unit: m/s

(m)

-3

-2

-1

012345678910

Side view Vertical airflow direction louver: Up Horizontal airflow direction louver: Center

2.0

0.5

1.0

(m)

012345678910

Unit: m/s

Side view Vertical airflow direction louver: Down Horizontal airflow direction louver: Center

0.50.5

2.0

1.0

(m)

012345678910

Unit: m/s

- 11 -

WALL MOUNTED

ASYG07-14KMTA

5-2. Airflow

Model: ASYG07KMTA

 Cooling

Fan speed Airflow

HIGH

m3/h

650

l/s 181

CFM 383

MED

m3/h

540

l/s 150

CFM 318

LOW

m3/h

430

l/s 119

CFM 253

QUIET

m3/h

270

l/s 75

CFM 159

 Heating

Fan speed Airflow

HIGH

m3/h

720

l/s 200

CFM 424

MED

m3/h

580

l/s 161

CFM 341

LOW

m3/h

460

l/s 128

CFM 271

QUIET

m3/h

330

l/s 92

CFM 194

- 12 -

WALL MOUNTED

ASYG07-14KMTA

Model: ASYG09KMTA

 Cooling

Fan speed Airflow

HIGH

m3/h

700

l/s 194

CFM 412

MED

m3/h

560

l/s 156

CFM 330

LOW

m3/h

430

l/s 119

CFM 253

QUIET

m3/h

270

l/s 75

CFM 159

 Heating

Fan speed Airflow

HIGH

m3/h

750

l/s 208

CFM 441

MED

m3/h

610

l/s 169

CFM 359

LOW

m3/h

470

l/s 131

CFM 277

QUIET

m3/h

330

l/s 92

CFM 194

- 13 -

WALL MOUNTED

ASYG07-14KMTA

Model: ASYG12KMTA

 Cooling

Fan speed Airflow

HIGH

m3/h

700

l/s 194

CFM 412

MED

m3/h

560

l/s 156

CFM 330

LOW

m3/h

430

l/s 119

CFM 253

QUIET

m3/h

270

l/s 75

CFM 159

 Heating

Fan speed Airflow

HIGH

m3/h

770

l/s 214

CFM 453

MED

m3/h

640

l/s 178

CFM 377

LOW

m3/h

520

l/s 144

CFM 306

QUIET

m3/h

330

l/s 92

CFM 194

- 14 -

WALL MOUNTED

ASYG07-14KMTA

Model: ASYG14KMTA

 Cooling

Fan speed Airflow

HIGH

m3/h

770

l/s 214

CFM 453

MED

m3/h

600

l/s 167

CFM 353

LOW

m3/h

450

l/s 125

CFM 265

QUIET

m3/h

280

l/s 78

CFM 165

 Heating

Fan speed Airflow

HIGH

m3/h

800

l/s 222

CFM 471

MED

m3/h

660

l/s 183

CFM 388

LOW

m3/h

520

l/s 144

CFM 306

QUIET

m3/h

340

l/s 94

CFM 200

- 15 -

WALL MOUNTED

ASYG07-14KMTA

6. Operation noise (sound pressure)

6-1. Noise level curve

Model: ASYG07KMTA

 Cooling

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

HIGH

QUIET

 Heating

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

HIGH

QUIET

Model: ASYG09KMTA

 Cooling

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

QUIET

HIGH

 Heating

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

HIGH

QUIET

- 16 -

WALL MOUNTED

ASYG07-14KMTA

Model: ASYG12KMTA

 Cooling

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

HIGH

QUIET

 Heating

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

HIGH

QUIET

Model: ASYG14KMTA

 Cooling

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

HIGH

QUIET

 Heating

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

HIGH

QUIET

- 17 -

WALL MOUNTED

ASYG07-14KMTA

6-2. Sound level check point

0.8 m

1 m

Microphone Microphone

NOTE: Detailed shape of the actual indoor unit might be slightly different from the one illustrated

above.

- 18 -

WALL MOUNTED

ASYG07-14KMTA

7. Safety devices

Type of

protection

Protection form

Model

ASYG07KMTA ASYG09KMTA ASYG12KMTA

Circuit protection

Current fuse (PCB*) 250 V, 3.15 A

Fan motor protection

Thermistor protection

Activate

More than 85 °C

Fan motor speed down

Reset

85 °C or less

Fan motor speed recover

Type of

protection

Protection form

Model

ASYG14KMTA

Circuit protection

Current fuse (PCB*) 250 V, 3.15 A

Fan motor protection

Power IC thermal shutdown protection

Activate

125±25 °C

Fan motor stop

Reset

110

+25

-20

°C

Fan motor restart

*PCB: Printed Circuit Board

- 19 -

WALL MOUNTED

ASYG07-14KMTA

8. External input and output

With using external input and output functions, this product can be operated inter-connectedly with an external device.

Connector Input Output Remarks

CNA01 Control input —

See external input/output

settings for details.

CNB01 — Operation status output CNB02 — Error status output

8-1. External input

With using external input function, some functions on this product can be controlled from an external device.

• “Operation/Stop” mode or "Forced stop" mode can be selected with function setting of indoor unit.

• A twisted pair cable (22AWG) should be used. Maximum length of cable is 150 m.

• The wire connection should be separate from the power cable line.

Control input (Operation/Stop or Forced stop)

The air conditioner can be remotely operated by means of the following on-site work. Unit operation is started at the following contents by adding the contact input of a commercial

on/off switch to a connector on the external control PCB and turning it on.

Unit operation Initial setting after power is on

Starting mode other than initial

setting

Operation mode Auto changeover Mode at previous operation Set temperature 24 °C Temperature at previous operation

Airflow mode AUTO Mode at previous operation

Air direction (swing) Standard air direction (swing: off) Air direction at previous operation

- 20 -

WALL MOUNTED

ASYG07-14KMTA

• Circuit diagram example

Signal

Locally purchased

Indoor unit

control PCB

Communication kit

Optional parts

Connector

10 m*

Connected unit

Example: Switch

• Contact capacity: DC 24 V or more, 10 mA or more.

• *: Make the distance from the PCB to the connected unit within 10 m.

• Use non-polar relays and switches.

– When function setting is “Operation/Stop” mode

Operation

Stop

Off

Input signal

Indoor unit

– When function setting is “Forced stop” mode

Remote controller

On On On

Input signal

Indoor unit

Command

Remote control operation invalidity

Off

Operation

Stop

Forced stop

Normal

– When function setting is "Operation/Stop" mode 2

Input

Off

Operation

Indoor unit

Stop

(R.C. disabled)

Remote controller

On OnOff

NOTE:

When "Operation/Stop" mode 2 function is used with forming a remote controller group, connect the same equipment to each indoor unit within the group.

- 21 -

WALL MOUNTED

ASYG07-14KMTA

• Optional part

Part name Model name Exterior

External connect kit UTY-XWZXZ5

External input wire

Communication kit UTY-TWBXF2

* For operating the external function, the wall mounted type requires the communication kit in addition to the wire (UTY-XWZXZ5).

- 22 -

WALL MOUNTED

ASYG07-14KMTA

8-2. External output

With using external output function, operating status of this product can be transmitted to the external device, and also, this product can be inter-connected with the external device.

Operation status output

Air conditioner operation status signal can be output.

• Circuit diagram example:

Locally purchasedOptional parts

Example: Display

Indoor unit

control PCB

Communication kit Connected unit

Example: Relay unit

Signal

Relay power supply

Connector

10 m*

DC 24 V

– *: Make the distance from the PCB to the connected unit within 10 m. – Relay spec: Max. DC 24 V, 10 mA to less than 500 mA.

Off

Operation

Stop

Indoor unit

Output signal

• Optional part:

Part name Model name Exterior

External connect kit UTY-XWZXZ5

External output wire

Communication kit UTY-TWBXF2

* For operating the external function, the wall mounted type requires the communication kit in addition to the wire (UTY-XWZXZ5).

- 23 -

WALL MOUNTED

ASYG07-14KMTA

Error status output

Air conditioner error status signal can be output.

• Circuit diagram example:

Locally purchasedOptional parts

Example: Display

Indoor unit

control PCB

Communication kit Connected unit

Example: Relay unit

Signal

Relay power supply

Connector

10 m*

DC 24 V

– *: Make the distance from the PCB to the connected unit within 10 m. – Relay spec: Max. DC 24 V, 10 mA to less than 500 mA.

Off

Error

Normal

Error status

Output signal

• Optional part:

Part name Model name Exterior

External connect kit UTY-XWZXZ5

External output wire

Communication kit UTY-TWBXF2

* For operating the external function, the wall mounted type requires the communication kit in addition to the wire (UTY-XWZXZ5).

- 24 -

WALL MOUNTED

ASYG07-14KMTA

9. Group connection

Wiring regulation on the remote controllers in the multi split models are reviewed and allowed for group connection.

Outdoor unit Outdoor unit

Indoor unit

Example of group connection

Indoor unit

*Exterior of each device shown above might be different from the actual one.

NOTES:

• Group connection is applicable for models that are produced in 2013 or later in following products:

– KM/KG/LT/LU/LM/LF series in wall mounted type – Floor type

• Up to 16 indoor units can be controlled by using one wired remote controller.

9-1. Precautions on creating a group connection

Take precautions on items described in this section when creating a group connection.

• Maximum wiring length of the remote controller cable: 300 m Even if the maximum wiring length of the product itself is specified as longer than 300 m, the maximum length of the remote controller cable will be 300 m if the system is group-connected.

When total wiring length is longer than 100 m, the cable diameter needs to be changed as follows:

Total wiring length of remote controller cable

Unit: m

Cross section of cable

Unit: mm

100 or less 0.3—0.8

100—200 0.5—0.8 200—300 0.8

- 25 -

WALL MOUNTED

ASYG07-14KMTA

• Required parts for group connection – Optional part:

Indoor unit type Communication kit

Wall mounted

UTY-TWBXF UTY-XWZXZ5 UTY-TWBXF2

As for the optional parts, refer to Chapter 13-2. "Others" on page 37.

– Service part: Wire with connector (Service part no. 9705932012)

Wiring example for multiple remote control or group control:

Communication kit Wire with connector

Crimping terminal and its insulation cap

Remote controller cable (Locally purchased

)

(Locally purchased)

Indoor unit

To the other indoor units or wired remote controller

NOTES:

• Conceal the wirings of the group connection inside of the wall or by means of trunking at the thickness of 1-mm or more to prevent electrical shocks when getting in touch with the cables under certain circumstances.

• When using the Communication kit for wall mounted type, store the crimping terminals inside the Communication kit.

• In the wireless remote controllers for the group connection, its remote controller address can be set by its own. For the details, refer to following section “Remote controller address setting procedure for wireless remote controllers”. An error is displayed immediately just turning on the power to effect the settings of the group connection. However the error will automatically disappear when the subsequent function setting is completed.

• Bundle the wires with a cable tie to prevent external pressures apply on the crimping terminals. (Ensure that the tensile strength for the splicing position is 10 N or above.)

9-2. Remote controller address setting procedure for wireless

remote controllers

1. Enter the function setting mode of the wireless remote controller. For details, refer to "Func-

tion settings" on page 29.

2. Select the function number “00” (Remote controller address setting), and then select any of the number (Setting value) from 00 to 15. (Factory setting: 00)

- 26 -

WALL MOUNTED

ASYG07-14KMTA

10. Remote controller

10-1. Wireless remote controller

Overview

Signal

transmitter

TEMP.

button

POWERFUL

button

10°C HEAT

button

Start/Stop

button

FAN button

SWING button

SET button

MODE button

RESET button

CLOCK ADJUST button

ECONOMY button

OUTDOOR UNIT

LOW NOISE button

ON TIMER button

OFF TIMER button

TIMER SELECT button

SLEEP TIMER button

TIMER CANCEL button

NOTE: Functions may differ by type of the indoor unit. For details, refer to the operation manual.

Display panel

Mode indicator

Clock and Timer indicator

LOW NOISE mode

indicator

Transmit indicator

Temperature indicator

Fan speed indicator

Swing indicator

To facilitate explanation, the accompanying illustration has been drawn to show all possible indicators; in actual operation, however, the display will only show those indicators appropriate to the current operation.

- 27 -

WALL MOUNTED

ASYG07-14KMTA

Specifications

 Controller

Unit: mm

Top view

Front view Side view

205

1761

Size (H × W × D) mm 205 × 61 × 17 Weight g 122 (without batteries)

 Holder

Unit: mm

48.5

5.5

26.2

69.3

6.5

Front View Side View

Bottom View

Ø 3.5 (Hole)

150

106.8

Hole

3.5

2-R

Size (H × W × D) mm 150 × 69.3 × 26.2 Weight g 27

- 28 -

WALL MOUNTED

ASYG07-14KMTA

11. Function settings

To adjust the functions of this product according to the installation environment, various types of function settings are available.

NOTE:

Incorrect settings can cause a product malfunction.

11-1. Function settings by using remote controller

Some function settings can be changed on the remote controller. After confirming the setting procedure and the content of each function setting, select appropriate functions for your installation environment.

Setting procedure by using wireless remote controller

The function number and the associated setting value are displayed on the LCD of the remote controller. Follow the instructions written in the local setup procedure supplied with the remote controller, and select appropriate setting according to the installation environment.

Before connecting the power supply of the indoor unit, reconfirm following items:

• Piping air tight test and vacuuming have been performed firmly.

• There is no wiring mistake.

Then, connect the power supply of the indoor unit.

Entering function setting mode:

While pressing the POWERFUL button and TEMP. ( ) button simultaneously, press the RESET button to enter the function setting mode.

STEP 1: Setting the remote controller custom code

Use the following steps to select the custom code of the remote controller. (Note that the air conditioner cannot receive a custom code if the air conditioner has not been set for the custom code.)

The custom codes that are set through this process are applicable only to the signal in the function setting.

For details on how to set the custom codes through the normal process, refer to "Custom code

setting for wireless remote controller" on page 35.

1. Press the TEMP. (

) ( ) buttons to change the custom code between → → → . Match the code on the display to the air conditioner custom code. (Initially set to .) If the custom code

does not need to be selected, press the 10 °C HEAT button, and proceed to STEP 2.

2. Press the MODE button and check that the indoor unit can receive signals at the displayed custom code.

3. Press the 10 °C HEAT button to accept the custom code, and proceed to STEP 2.

4. After completing the function setting, be sure to disconnect the power supply and then reconnect it.

- 29 -

WALL MOUNTED

ASYG07-14KMTA

NOTES:

• The air conditioner custom code is set to

prior to shipment.

• The remote controller resets to custom code when the batteries on the remote controller are replaced. If you use a custom code other than code , reset the custom code after replacing

the batteries.

• If you do not know the air conditioner custom code setting, try each of the custom codes (

→

→ → ) until you find the code that operates the air conditioner.

STEP 2: Selecting the function number and setting value

1. Press the TEMP. ( ) ( ) buttons to select the function number. To switch between the left and right digits, press the 10 °C HEAT button.

2. Press the POWERFUL button to proceed the setting value. To return the function number selection, press the POWERFUL button again.

3. Press the TEMP. (

) ( ) buttons to select the setting value. To switch between the left and right digits, press the 10 °C HEAT button.

4. Press the MODE button, and START/STOP button, in the order listed to confirm the settings.

5. Press the RESET button to cancel the function setting mode.

6. After completing the function setting, be sure to disconnect the power supply and then reconnect it.

Function number

Setting value

CAUTION

After disconnecting the power supply, wait 30 seconds or more before reconnecting it. The function setting will not become active unless the power supply is disconnected and then reconnected.

- 30 -

WALL MOUNTED

ASYG07-14KMTA

Contents of function setting

Each function setting listed in this section is adjustable in accordance with the installation environment.

NOTE:

Setting will not be changed if invalid numbers or setting values are selected.



Function setting list

Function no. Functions

1) 00 Remote controller address setting

2) 11 Filter sign

3) 30/31 Room temperature control for indoor unit sensor

4) 35/36 Room temperature control for wired remote controller sensor

5) 40 Auto restart

6) 42 Room temperature sensor switching

7) 44 Remote controller custom code

8) 46 External input control

9) 48 Room temperature sensor switching (Aux.)

10) 49 Indoor unit fan control for energy saving for cooling

1) Remote controller address setting

NOTE: This setting is configurable only by wireless remote controller, but not configurable by

Polar 3-wired remote controller.

Multiple indoor units can be operated by using one wired remote controller. Set the unit number of each indoor unit.

Function number Setting value Setting description Factory setting

00 Unit no. 0 ♦ 01 Unit no. 1 02 Unit no. 2 03 Unit no. 3 04 Unit no. 4 05 Unit no. 5 06 Unit no. 6 07 Unit no. 7 08 Unit no. 8 09 Unit no. 9 10 Unit no. 10 11 Unit no. 11 12 Unit no. 12 13 Unit no. 13 14 Unit no. 14 15 Unit no. 15

NOTES:

• When connecting Polar 3-wired remote controller, set the remote controller address in the or-

der of 0, 1, 2, ....., and 15.

• When different type of indoor units (such as wall mounted type and cassette type, cassette type and duct type, or other combinations) are connected using group control system, some functions may no longer be available.

- 31 -

WALL MOUNTED

ASYG07-14KMTA

2) Filter sign

Select appropriate intervals for displaying the filter sign on the indoor unit according to the estimated amount of dust in the air of the room.

If the indication is not required, select "No indication" (03).

Function number Setting value Setting description Factory setting

00 Standard (400 hours) 01 Long interval (1,000 hours) 02 Short interval (200 hours) 03 No indication ♦

3) Room temperature control for indoor unit sensor

Depending on the installed environment, correction of the room temperature sensor may be required. Select the appropriate control setting according to the installed environment.

The temperature correction values show the difference from the Standard setting "00" (manufacturer’s recommended value).

Function number Setting value Setting description

Factory

setting

(For cooling)

(For heating)

00 Standard setting ♦ 01 No correction 0.0 °C 02 -0.5 °C

More cooling Less heating

03 -1.0 °C 04 -1.5 °C 05 -2.0 °C 06 -2.5 °C 07 -3.0 °C 08 -3.5 °C 09 -4.0 °C 10 +0.5 °C

Less cooling

More heating

11 +1.0 °C 12 +1.5 °C 13 +2.0 °C 14 +2.5 °C 15 +3.0 °C 16 +3.5 °C 17 +4.0 °C

- 32 -

WALL MOUNTED

ASYG07-14KMTA

4) Room temperature control for wired remote controller sensor

Depending on the installed environment, correction of the wire remote temperature sensor may be required. Select the appropriate control setting according to the installed environment.

To change this setting, set Function 42 to Both “01”. Ensure that the Thermo Sensor icon is displayed on the remote controller screen.

Function number Setting value Setting description

Factory

setting

(For cooling)

(For heating)

00 No correction ♦ 01 No correction 0.0°C 02 -0.5 °C

More cooling Less heating

03 -1.0 °C 04 -1.5 °C 05 -2.0 °C 06 -2.5 °C 07 -3.0 °C 08 -3.5 °C 09 -4.0 °C 10 +0.5 °C

Less cooling

More heating

11 +1.0 °C 12 +1.5 °C 13 +2.0 °C 14 +2.5 °C 15 +3.0 °C 16 +3.5 °C 17 +4.0 °C

5) Auto restart

Enables or disables automatic restart after a power interruption.

Function number Setting value Setting description Factory setting

00 Enable ♦ 01 Disable

NOTE: Auto restart is an emergency function such as for power outage etc. Do not attempt to

use this function in normal operation. Be sure to operate the unit by remote controller or external device.

6) Room temperature sensor switching

(Only for wired remote controller) When using the wired remote controller temperature sensor, change the setting to "Both" (01).

Function number Setting value Setting description Factory setting

00 Indoor unit ♦ 01 Both

00: Sensor on the indoor unit is active. 01: Sensors on both indoor unit and wired remote controller are active.

NOTE: Remote controller sensor must be turned on by using the remote controller.

- 33 -

WALL MOUNTED

ASYG07-14KMTA

7) Remote controller custom code

(Only for wireless remote controller) The indoor unit custom code can be changed. Select the appropriate custom code.

Function number Setting value Setting description Factory setting

00 A ♦ 01 B 02 C 03 D

8) External input control

"Operation/Stop" mode or "Forced stop" mode can be selected.

Function number Setting value Setting description Factory setting

00 Operation/Stop mode 1 ♦ 01 (Setting prohibited) 02 Forced stop mode 03 Operation/Stop mode 2

9) Room temperature sensor switching (Aux.)

To use the temperature sensor on the wired remote controller only, change the setting to "Wired remote controller" (01).

This function will only work if the function setting 42 is set at "Both" (01). When the setting value is set to "Both" (00), more suitable control of the room temperature is pos-

sible by setting function setting 30 and 31 too.

Function number Setting value Setting description Factory setting

00 Both ♦ 01 Wired remote controller

10) Indoor unit fan control for energy saving for cooling

Enables or disables the power-saving function by controlling the indoor unit fan rotation when the outdoor unit is stopped during cooling operation.

Function number Setting value Setting description Factory setting

00 Disable 01 Enable 02 Remote controller ♦

00: When the outdoor unit is stopped, the indoor unit fan operates continuously following the set-

ting on the remote controller.

01: When the outdoor unit is stopped, the indoor unit fan operates intermittently at a very low

speed.

02: Enable or disable this function by remote controller setting.

NOTES:

• As the factory setting, this setting is initially activated.

• Set to "00" or "01" when connecting a remote controller that cannot set the Fan control for energy saving function or connecting a network converter. To confirm if the remote controller has this setting, refer to the operating manual of each remote controller.

- 34 -

WALL MOUNTED

ASYG07-14KMTA

11-2. Custom code setting for wireless remote controller

To interconnect the air conditioner and the wireless remote controller, assignment of the custom code for the wireless remote controller is required.

NOTE:

Air conditioner cannot receive a signal if the air conditioner has not been set for the custom code.

When 2 or more air conditioners are installed in a room, and the remote controller is operating an air conditioner other than the one you wish to set, change the custom code of the remote controller to operate only the air conditioner you wish to set. (4 selections possible.)

Confirm the setting of the remote controller custom code and the function setting. If these do not match, the remote controller cannot be used to operate for the air conditioner.

1. Press the START/STOP button until only the clock is displayed on the remote controller display.

2. Press the MODE button for at least 5 seconds to display the current custom code. (Initially set to

3. Press the TEMP. ( ) ( ) buttons to change the custom code between → → → . Match the code on the display to the air conditioner custom code. (Initially set to .)

4. Press the MODE button again to return to the clock display. The custom code will be changed.

NOTES:

• If no button is pressed within 30 seconds after the custom code is displayed, the system returns to the original clock indicator. In this case, start again from step 1.

•

The air conditioner custom code is set to prior to shipment. To change the custom code, contact your retailer.

•

If you do not know the assigned code for the air conditioner, try each of the custom code ( → → → ) until you find the code which operates the air conditioner.

- 35 -

WALL MOUNTED

ASYG07-14KMTA

12. Accessories

12-1. Models: ASYG07KMTA, ASYG09KMTA, ASYG12KMTA,

and ASYG14KMTA

Part name Exterior Q’ty Part name Exterior Q’ty

Operating manual 1 Cloth tape 1

Installation manual 1 Screw (Large) 5

Operating manual (CD-ROM)

1 Screw (Small) 2

Remote controller 1 Wall hook bracket 1

Battery 2

Remote controller holder

- 36 -

WALL MOUNTED

ASYG07-14KMTA

13. Optional parts

13-1. Controllers

Exterior Part name Model name Summary

Wired remote

controller

UTY-RVNYM

Large and full-dot liquid crystal screen, wide and large keys easy to press, user-intuitive arrow key. Wire type: Polar 3-wire

Optional communication kit is necessary for installation.

Wired remote

controller

UTY-RNNYM

Room temperature can be controlled by detecting the temperature accurately with built-in thermo sensor. Wire type: Polar 3-wire

Optional communication kit is necessary for installation.

Simple remote

controller

UTY-RSNYM

Compact remote controller concentrates on the basic functions such as Start/Stop, fan control, temperature setting, and operation mode. Wire type: Polar 3-wire

Optional communication kit is necessary for installation.

NOTE:

Available functions may differ by the remote controller. For details, refer to the operation manual.

13-2. Others

Exterior Part name Model name Summary

External

connect kit

UTY-XWZXZ5

Required when external device is connected.

Optional communication kit is necessary for installation.

Communication

kit

UTY-TWBXF2

Use to connect with optional devices and air conditioner PCB.

Wireless LAN

adapter

UTY-TFSXW1

Remotely manage an air conditioning system using mobile devices such as smartphones and tablets.

- 37 -

WALL MOUNTED

ASYG07-14KMTA

- 38 -

WALL MOUNTED

ASYG07-14KMTA

Part 2. OUTDOOR UNIT

SINGLE TYPE:

AOYG07KMTA AOYG09KMTA AOYG12KMTA AOYG14KMTA

1. Specifications

Type Inverter heat pump

Model name AOYG07KMTA AOYG09KMTA AOYG12KMTA AOYG14KMTA

Power supply 230 V ~ 50 Hz Available voltage range 198—264 V Starting current A 3.0 3.4 5.1 6.8

Fan

Airflow rate

Cooling

m3/h

1,650 1,650 1,700 1,680

Heating 1,450 1,450 1,470 1,580 Type × Q'ty Propeller fan × 1 Motor output W 23

Sound pressure level *1

Cooling

dB (A)

46 50

Heating 46 50

Sound power level

Cooling

dB (A)

61 65

Heating 61 62 65 66

Heat exchanger type

Dimensions

(H × W × D)

504 × 650 × 18.2 504 × 630 × 36.4 504 × 881 × 36.4

Fin pitch 1.3

Rows × Stages 1 × 24 2 × 24

Pipe type Copper

Fin type

Type (Material) Corrugate (Aluminum) Surface treatment Corrosion resistance

Compressor

Type × Q'ty Rotary × 1 Motor output W 550 900

Refrigerant

Type (Global warming potential) R32 (675)

Charge g 600 700 850

Refrigerant oil

Type RB74AF RB68A

Amount

240 340

Enclosure

Material Steel sheet

Color

Beige

Approximate color of Munsell 10YR 7.5/1.0 Dimensions (H × W × D)

Net

541 × 663 × 290 542 × 799 × 290

Gross 602 × 804 × 375 602 × 940 × 375

Weight

Net

23 25 31

Gross 26 29 35

Connection pipe

Size

Liquid

mm (in)

Ø 6.35 (Ø 1/4)

Gas Ø 9.52 (Ø 3/8) Method Flare Pre-charge length

15 Max. length 20 Max. height difference 15

Operation range

Cooling

°C

-10 to 46

Heating -15 to 24

Drain hose

Material PP+LLDPE Size mm Ø 13.0 (I. D.), Ø 16.0 to Ø 16.8 (O. D.)

NOTES:

• Protective function might work when using it outside the operation range.

• *1: Sound pressure level – Measured values in manufacturer’s anechoic chamber. – Because of the surrounding sound environment, the sound levels measured in actual installation conditions might be higher than the specified values here.

- 40 -

OUTDOOR UNIT

AOYG07-14KMTA

2. Dimensions

2-1. Models: AOYG07KMTA, AOYG09KMTA, and

AOYG12KMTA

Unit: mm

290

20 42

450

Pitch of bolts for installation

330

Pitch of bolts

for installation

106

331

Drain port Ø42

Top view

Side view

663

541

Front view

Side view

Airflow

184

120

179331

Bottom view Side view (Bulb part)

Drain port Ø42

- 41 -

OUTDOOR UNIT

AOYG07-14KMTA

2-2. Model: AOYG14KMTA

Unit: mm

Airflow

184

120

179399

Bottom view Side view (Bulb part)

580 109

799 68 29016

33 30

330

542

Pitch of bolts

for installation

Pitch of bolts for installation

Top view

Side viewSide view

Front view

Drain port Ø42

4-M10 hole

- 42 -

OUTDOOR UNIT

AOYG07-14KMTA

3. Installation space

3-1. Models: AOYG07KMTA, AOYG09KMTA, AOYG12KMTA,

and AOYG14KMTA

Space requirement

Provide sufficient installation space for product safety.

CAUTION

Keep the space shown in the installation examples. If the installation is not performed accordingly, it could cause a short circuit and result in a lack of

operating performance.

 Single outdoor unit installation

• When the upper space is open:

Unit: mm

Obstacles at rear only Obstacles at rear and sides

100 or more

250 or more

100 or more

Obstacles at front Obstacles at front and rear

600 or more

100 or more

• When there is an obstruction in the upper space:

Unit: mm

Obstacles at rear and above Obstacles at rear, sides, and above

100 or more

Max. 200

600 or more

250 or more

100 or more

Max. 200

100 or more

600 or more

- 43 -

OUTDOOR UNIT

AOYG07-14KMTA

 Multiple outdoor unit installation

• Provide at least 250 mm of space between the outdoor units if multiple units are installed.

• When routing the piping from the side of an outdoor unit, provide space for piping.

• No more than 3 units must be installed side by side. When 3 units or more are arranged in a line, provide the space as shown in the following example “When an obstruction in the upper space:”.

• When the upper space is open:

Unit: mm

Obstacles at rear only Obstacles at front only

200 or more

250 or more

1,000 or more

250 or more

Obstacles at front and rear

200 or more

1,000 or more

250 or more

• When an obstruction in the upper space:

Unit: mm

Obstacles at rear and above.

1,500 or more

200 or more

250 or more

Max. 300

1,500 or more

- 44 -

OUTDOOR UNIT

AOYG07-14KMTA

 Outdoor units installation in multi-row

Unit: mm

Single parallel unit arrangement Multiple parallel unit arrangement

100 or more

200 or more

500 or more

1,000 or more

200 or more

400 or more

1,000 or more

250 or more

2,000 or more

250 or more

1,000 or more

200 or more

250 or more

200 or more

NOTES:

• If the space is larger than stated above, the condition will be the same as when there is no obstacle.

• When installing the outdoor unit, be sure to open the front and left side to obtain better operation efficiency.

CAUTION

• Do not install the outdoor unit in two-stage where the drain water could freeze. Otherwise the drainage from the upper unit may form ice and cause a malfunction of the lower unit.

• When the outdoor temperature is 0 °C or less, do not use the accessory drain pipe and drain cap. If the drain pipe and drain cap are used, the drain water in the pipe may freeze in extremely cold climate. (For reverse cycle model only.)

• In area with heavy snowfall, if the inlet and outlet of the outdoor unit is blocked with snow, it might become difficult to get warm, and it is likely to cause product malfunction. Construct a canopy and a pedestal, or place the unit on a high stand that is locally installed.

- 45 -

OUTDOOR UNIT

AOYG07-14KMTA

4. Refrigerant circuit

4-1. Models: AOYG07KMTA, AOYG09KMTA, and

AOYG12KMTA

Strainer

3-way

valve

2-way

valve

4-way valve

Expansion valve

Heat exchanger

(INDOOR)

(OUTDOOR)

Compressor

Cooling

Heating

: Thermistor (Discharge temperature)

: Thermistor (Outdoor temperature)

: Thermistor (Heat exchanger out temperature)

: Thermistor (Room temperature)

: Thermistor (Pipe temperature)

Muffler

- 46 -

OUTDOOR UNIT

AOYG07-14KMTA

4-2. Model: AOYG14KMTA

Strainer

3-way

valve

2-way

valve

Muffler

4-way valve

Expansion valve

Heat exchanger

(INDOOR)

(OUTDOOR)

Compressor

Cooling

Heating

: Thermistor (Discharge temperature)

: Thermistor (Outdoor temperature)

: Thermistor (Heat exchanger out temperature)

: Thermistor (Room temperature)

: Thermistor (Pipe temperature)

Muffler

- 47 -

OUTDOOR UNIT

AOYG07-14KMTA

5. Wiring diagrams

5-1. Models: AOYG07KMTA, AOYG09KMTA, AOYG12KMTA,

and AOYG14KMTA

- 48 -

OUTDOOR UNIT

AOYG07-14KMTA

6. Capacity compensation rate for pipe length and height difference

Height difference H

Indoor unit is higher than outdoor unit

Indoor unit is lower than outdoor unit *

Indoor unit

Connection pipe

Outdoor unit

Connection pipe

6-1. Models: AOYG07KMTA and AOYG09KMTA

NOTE: Values mentioned in the table are calculated based on the maximum capacity.

COOLING

Pipe length (m)

5 7.5 10 15 20

Height difference H (m)

Indoor unit is higher than

outdoor unit *1

15 — — — 0.872 0.910 10 — — 0.961 0.886 0.925

7.5 — 0.979 0.965 0.890 0.929 5 0.992 0.983 0.969 0.893 0.933 0 1.000 0.991 0.976 0.901 0.940

Indoor unit is lower than

outdoor unit *2

-5 1.000 0.991 0.976 0.901 0.940

-7.5 — 0.991 0.976 0.901 0.940

-10 — — 0.976 0.901 0.940

-15 — — — 0.901 0.940

HEATING

Pipe length (m)

5 7.5 10 15 20

Height difference H (m)

Indoor unit is higher than

outdoor unit *1

15 — — — 0.832 0.822 10 — — 0.917 0.832 0.822

7.5 — 0.961 0.917 0.832 0.822 5 1.000 0.961 0.917 0.832 0.822 0 1.000 0.961 0.917 0.832 0.822

Indoor unit is lower than

outdoor unit *2

-5 0.955 0.956 0.912 0.828 0.818

-7.5 — 0.954 0.910 0.826 0.816

-10 — — 0.908 0.824 0.814

-15 — — — 0.815 0.805

- 49 -

OUTDOOR UNIT

AOYG07-14KMTA

6-2. Model: AOYG12KMTA

NOTE: Values mentioned in the table are calculated based on the maximum capacity.

COOLING

Pipe length (m)

5 7.5 10 15 20

Height difference H (m)

Indoor unit is higher than

outdoor unit *1

15 — — — 0.858 0.868 10 — — 0.929 0.872 0.882

7.5 — 0.960 0.933 0.876 0.885 5 0.992 0.964 0.937 0.879 0.889 0 1.000 0.972 0.944 0.887 0.896

Indoor unit is lower than

outdoor unit *2

-5 1.000 0.972 0.944 0.887 0.896

-7.5 — 0.972 0.944 0.887 0.896

-10 — — 0.944 0.887 0.896

-15 — — — 0.887 0.896

HEATING

Pipe length (m)

5 7.5 10 15 20

Height difference H (m)

Indoor unit is higher than

outdoor unit *1

15 — — — 0.896 0.879 10 — — 0.968 0.890 0.879

7.5 — 0.994 0.968 0.896 0.879 5 1.000 0.994 0.968 0.896 0.879 0 1.000 0.994 0.968 0.896 0.879

Indoor unit is lower than

outdoor unit *2

-5 0.995 0.989 0.963 0.891 0.875

-7.5 — 0.987 0.961 0.889 0.873

-10 — — 0.959 0.887 0.871

-15 — — — 0.878 0.862

6-3. Model: AOYG14KMTA

NOTE:

Values mentioned in the table are calculated based on the maximum capacity.

COOLING

Pipe length (m)

5 7.5 10 15 20

Height difference H (m)

Indoor unit is higher than

outdoor unit *1

15 — — — 0.893 0.909 10 — — 0.955 0.908 0.924

7.5 — 0.975 0.959 0.912 0.928 5 0.992 0.979 0.963 0.916 0.931 0 1.000 0.987 0.970 0.923 0.939

Indoor unit is lower than

outdoor unit *2

-5 1.000 0.987 0.970 0.923 0.939

-7.5 — 0.987 0.970 0.923 0.939

-10 — — 0.970 0.923 0.939

-15 — — — 0.923 0.939

HEATING

Pipe length (m)

5 7.5 10 15 20

Height difference H (m)

Indoor unit is higher than

outdoor unit *1

15 — — — 0.956 0.938 10 — — 1.004 0.956 0.938

7.5 — 1.013 1.004 0.956 0.938 5 1.000 1.013 1.004 0.956 0.938 0 1.000 1.013 1.004 0.956 0.938

Indoor unit is lower than

outdoor unit *2

-5 0.995 1.008 0.999 0.951 0.938

-7.5 — 1.005 0.997 0.948 0.931

-10 — — 0.994 0.946 0.929

-15 — — — 0.937 0.919

- 50 -

OUTDOOR UNIT

AOYG07-14KMTA

7. Additional charge calculation

7-1. Models: AOYG07KMTA and AOYG09KMTA

Refrigerant type R32 Refrigerant amount g 600

¢ Refrigerant charge

Total pipe length m 15 or less 20 (Max.)

20 g/m

Additional charge g 0 100

7-2. Model: AOYG12KMTA

Refrigerant type R32 Refrigerant amount g 700

¢ Refrigerant charge

Total pipe length m 15 or less 20 (Max.)

20 g/m

Additional charge g 0 100

7-3. Model: AOYG14KMTA

Refrigerant type R32 Refrigerant amount g 850

¢ Refrigerant charge

Total pipe length m 15 or less 20 (Max.)

20 g/m

Additional charge g 0 100

- 51 -

OUTDOOR UNIT

AOYG07-14KMTA

8. Airflow

8-1. Model: AOYG07KMTA

 Cooling

m3/h

1,650

l/s 458

CFM 971

 Heating

m3/h

1,450

l/s 403

CFM 853

8-2. Model: AOYG09KMTA

 Cooling

m3/h

1,650

l/s 458

CFM 971

 Heating

m3/h

1,450

l/s 403

CFM 853

8-3. Model: AOYG12KMTA

 Cooling

1,700

l/s 472

CFM 1,001

 Heating

1,470

l/s 408

CFM 865

- 52 -

OUTDOOR UNIT

AOYG07-14KMTA

8-4. Model: AOYG14KMTA

 Cooling

m3/h

1,680

l/s 467

CFM 989

 Heating

m3/h

1,580

l/s 439

CFM 930

- 53 -

OUTDOOR UNIT

AOYG07-14KMTA

9. Operation noise (sound pressure)

9-1. Noise level curve

Model: AOYG07KMTA

 Cooling

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

 Heating

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

Model: AOYG09KMTA

 Cooling

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

 Heating

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

- 54 -

OUTDOOR UNIT

AOYG07-14KMTA

Model: AOYG12KMTA

 Cooling

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

 Heating

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

Model: AOYG14KMTA

 Cooling

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

 Heating

Octave band sound pressure level, dB: (0 dB=0.0 002 µbar)

Octave band center frequency, Hz

63 125 250 500 1,000 2,000 4,000 8,000

NC-65

NC-60

NC-55

NC-50

NC-45

NC-40

NC-35

NC-30

NC-25

NC-20

NC-15

- 55 -

OUTDOOR UNIT

AOYG07-14KMTA

9-2. Sound level check point

1 m

MicrophoneMicrophone

Rear

irflow

Rear view

Side view

NOTE: Detailed shape of the actual outdoor unit might be slightly different from the one illustrat-

ed above.

- 56 -

OUTDOOR UNIT

AOYG07-14KMTA

10. Electrical characteristics

Model name AOYG07KMTA AOYG09KMTA AOYG12KMTA AOYG14KMTA Power

supply

Voltage V 230 ~

Frequency Hz 50 Max operating current *1 A 9.0 Starting current A 3.0 3.4 5.1 6.8

Wiring spec. *2

Circuit breaker current A 15

Power cable

1.5

Connection

cable *3

Crosssectional area

1.5

Limited wiring length

m 21

*1: Maximum operating current is the total current of the indoor unit and the outdoor unit. *2: Selected sample based on Japan Electrotechnical Standards and Codes Committee E0005.

As the regulations of wire size and circuit breaker differ in each country or region, select appropriate devices complied to the regional standard.

*3: Limit voltage drop to less than 2%. If voltage drop is 2% or more, increase cable conductor size.

- 57 -

OUTDOOR UNIT

AOYG07-14KMTA

11. Safety devices

Type of

protection

Protection form

Model

AOYG07KMTA AOYG09KMTA

Circuit protection Current fuse (Main PCB)

250 V, 20 A

250 V, 5 A

Fan motor protection

Terminal protection program

Activate

85—122 °C

Fan motor stop

Reset

77—114 °C

Fan motor restart

Compressor protection

Terminal protection program (Discharge temp.)

Activate

110 °C

Compressor stop

Reset

After 7 minutes

Compressor restart

Type of

protection

Protection form

Model

AOYG12KMTA AOYG14KMTA

Circuit protection Current fuse (Main PCB)

250 V, 20 A

250 V, 5 A

Fan motor protection

Terminal protection program

Activate

85—122 °C

Fan motor stop

Reset

77—114 °C

Fan motor restart

Compressor protection

Terminal protection program (Discharge temp.)

Activate

110 °C

Compressor stop

Reset

After 7 minutes

Compressor restart

- 58 -

OUTDOOR UNIT

AOYG07-14KMTA

12. Accessories

12-1. Models: AOYG07KMTA, AOYG09KMTA, AOYG12KMTA,

and AOYG14KMTA

Part name Exterior Q’ty Part name Exterior Q’ty

Installation manual 1 Drain pipe 1

- 59 -

OUTDOOR UNIT

AOYG07-14KMTA

Fujitsu ASYG07KMTA, ASYG09KMTA, ASYG14KMTA, ASYG12KMTA, AOYG07KMTA Design & Technical Manual

Specifications and Main Features

Frequently Asked Questions

User Manual