Fujitsu 9332280012-02 User Manual
Compact Wall Mounted Type
PART NO.9332280012-02
CONTENTS
SAFETY PRECAUTIONS ......................................En-1
FEATURES AND FUNCTIONS .............................En-2
NAME OF PARTS .................................................En-3
PREPARATION ......................................................En-5
OPERATION ..........................................................En-6
TIMER OPERATION ..............................................En-8
SLEEP TIMER OPERATION ..................................En-9
ADJUSTING THE DIRECTION OF
AIR CIRCULATION ............................................ En-10
SWING OPERATION ..........................................En-11
ECONOMY OPERATION ....................................En-11
MINIMUM HEAT OPERATION ...........................En-12
MANUAL AUTO OPERATION ...........................En-12
CLEANING AND CARE ......................................En-13
TROUBLESHOOTING ........................................En-15
OPERATING TIPS ...............................................En-16
SAFETY PRECAUTIONS
Before using the appliance, read these “PRECAUTIONS” thoroughly and operate in the correct way.
●
The instructions in this section all relate to safety; be sure to maintain safe operating conditions.
●
“DANGER”, “WARNING” and “CAUTION” have the following meanings in these instructions:
●
DANGER!
WARNING!
CAUTION!
This mark indicates procedures which, if improperly performed, are most likely to
result in the death or serious injury to the user or service personnel.
This mark indicates procedures which, if improperly performed, might lead to the
death or serious injury of the user or service personnel.
This mark indicates procedures which, if improperly performed, might possibly result
in personal harm to the user, or damage to property.
DANGER!
CAUTION!
Do not attempt to install this air conditioner by yourself.
●
This air conditioner contains no user-serviceable parts. Always consult authorized
●
service personnel for repairs.
When moving, consult authorized service personnel for disconnection and installa-
●
tion of the air conditioner.
Do not become excessively chilled by staying for many hours in the direct cooling airfl ow.
●
Do not insert fi ngers or objects into the outlet port or intake grille.
●
Do not start and stop air conditioner operation by disconnecting the power supply
●
cord and so on.
Take care not to damage the power supply cord.
●
If the power supply cord of this appliance is damaged, it should only be replaced by the
●
authorized service personal, since special purpose tools and specifi ed cord are required.
In the event of a malfunction (burning smell, etc.), immediately stop operation, turn
●
off the breaker, and consult authorized service personnel.
Provide occasional ventilation during use.
●
Do not direct airfl ow at fi replaces or heating apparatus.
●
Do not climb on, or place objects on, the air conditioner.
●
Do not hang objects from the indoor unit.
●
Do not set fl ower vases or water containers on top of air conditioners.
●
Do not expose the air conditioner directly to water.
●
Do not operate the air conditioner with wet hands.
●
Do not pull power supply cord.
●
Turn off power supply when not using the indoor unit for extended periods.
●
Check the condition of the installation stand for damage.
●
Do not place animals or plants in the direct path of the airfl ow.
●
Do not drink the water drained from the air conditioner.
●
Do not use in applications involving the storage of foods, plants or animals, preci-
●
sion equipment, or art works.
Connection valves become hot during Heating; handle with care.
●
Do not apply any heavy pressure to radiator fi ns.
●
Operate only with air fi lters installed.
●
Do not block or cover the intake grille and outlet port.
●
En-1
Ensure that any electronic equipment is at least 3.3ft (1m) away from either the in-
CAUTION!
●
door or outdoor units.
Avoid installing the air conditioner near a fi replace or other heating apparatus.
●
When installing the indoor and outdoor unit, take precautions to prevent access to infants.
●
Do not use infl ammable gases near the air conditioner.
●
This appliance is not intended for use by persons (including children) with reduced
●
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
FEATURES AND FUNCTIONS
INVERTER
At the start of operation, a large power is used to bring the
room quickly to the desired temperature. Afterward, the
air conditioner automatically switches to a low power setting for economic and comfortable operation.
WIRELESS REMOTE CONTROLLER
The Wireless Remote Controller allows convenient control
of indoor unit operation.
ECONOMY OPERATION
When ECONOMY operation mode is operated, the room
temperature will be little higher than the set-temp under
cooling mode and lower than set-temp under heating
mode. Therefore, the ECONOMY mode is able to save
more energy than other normal mode.
AUTO CHANGEOVER
The operation mode (cooling, dry, heating) is switched automatically to maintain the set temperature, and the temperature is kept constant at all times.
MINIMUM HEAT OPERATION
The room temperature can be maintained at 50 °F so as to
prevent the room temperature from falling too far.
PROGRAM TIMER
The program timer allows you to integrate OFF timer and
ON timer operations in a single sequence. The sequence
can involve one transition from OFF timer to ON timer, or
from ON timer to OFF timer, within a twenty-four hour period.
MILDEW-RESISTANT FILTER
The AIR FILTER has been treated to resist mildew growth,
thus allowing cleaner use and easier care.
SUPER QUIET OPERATION
When the FAN button is used to select QUIET, the indoor
unit begins super-quiet operation; the indoor unit’s airfl ow
is reduced to produce quieter operation.
POLYPHENOL CATECHIN AIR CLEANING FILTER
The polyphenol catechin air cleaning filter uses static
electricity to clean fi ne particles and dust in the air such
as tobacco smoke and plant pollen that are too small to
see. The fi lter contains catechin, which is highly effective
against various bacteria by suppressing the growth of the
bacteria adsorbed to the fi lter.
Note that when the air cleaning filter is installed, the
amount of air produced decreases, causing a slight decrease in the indoor unit’s performance.
NEGATIVE AIR IONS DEODORIZING FILTER
It comprises pottery super micro particles which can produce negative air ions having the effect of deodorizing and
can absorb and remit the peculiar smell at home.
SLEEP TIMER
When the SLEEP button is pressed during Heating mode,
the indoor unit’s thermostat setting is gradually lowered
during the period of operation; during cooling mode, the
thermostat setting is gradually raised during the period of
operation. When the set time is reached, the indoor unit
automatically turns off.
SWING OPERATION
The Air Flow Direction Louvers swings automatically up
and down so that the air speeds to every nook and corner
of your room.
REMOVABLE INTAKE GRILLE
The indoor unit’s Intake Grille can be removed for easy
cleaning and maintenance.
En-2
NAME OF PARTS
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
To facilitate explanation, the accompanying illustration has been drawn to show all possible indicators; in actual operation, however, the display will
only show those indicators appropriate to the current operation.
En-3
Fig. 1 Indoor Unit
Operating Control Panel (Fig. 2)
1
MANUAL AUTO button
2
3
4
5
6
7
8
9
0
A
B
When kept on pressing the MANUAL
●
AUTO button for more than 10 seconds, the forced cooling operation will
start.
The forced cooling operation is used at
●
the time of installation.
Only for authorized service personnel's
use.
When the forced cooling operation
●
starts by any chance, press the START/
STOP button to stop the operation.
Please press the button at
●
INDICATOR RESET
Indicator (Fig. 3)
Remote Control Signal Receiver
OPERATION Indicator Lamp (green)
TIMER Indicator Lamp (orange)
If the TIMER indicator lamp flashes
●
when the timer is operating, it indicates that a fault has occurred with the
timer setting (See Page 17 Auto Restart).
ECONOMY Indicator Lamp (green)
ECONOMY indicator lamp lights when
●
ECONOMY OPERATION and MINIMUM
HEAT OPERATION is operating.
Intake Grille (Fig. 4)
Front Panel
Air Filter
Airfl ow Direction Louver
Right-Left Louver
(behind Airfl ow Direction Louver)
Drain Hose
C
FILTER
Fig. 5 Remote Controller
Signal Transmitter
D
MODE button
E
MIN.HEAT button
F
ECONOMY button
G
SLEEP button
H
TIMER MODE button
I
FAN button
J
START/STOP button
K
SET button (Vertical)
L
SWING button
M
SET TEMP. button (
N
TIMER SET ( / ) button
O
CLOCK ADJUST button
P
TEST RUN button
Q
This button is used when installing
●
the air conditioner, and should not be
used under normal conditions, as it
will cause the indoor unit’s thermostat
function to operate incorrectly.
If this button is pressed during normal
●
operation, the indoor unit will switch
to test operation mode, and the Indoor
Unit’s OPERATION Indicator Lamp and
TIMER Indicator Lamp will begin to
fl ash simultaneously.
To stop the test operation mode, press
●
the START/STOP button to stop the air
conditioner.
RESET button
R
Remote Controller Display(Fig.6)
S
Temperature SET Display
T
Operation Mode Display
U
SLEEP TIMER Display
V
Transmit Indicator
W
Fan Speed Display
X
SWING Display
Y
Timer Mode Display
Z
Clock Display
[
/ )
En-4
PREPARATION
Turn on the Power
Turn on the circuit breaker
1
Load Batteries (AAA/R03/LR03 × 2)
Press and slide the battery compartment lid on the
1
reverse side to open it.
Slide in the direction of the arrow while pressing the mark.
Insert batteries.
2
Be sure to align the battery polarities ( ) correctly.
Close the battery compartment lid.
3
Set the Current time
Press the CLOCK ADJUST button (Fig. 5 P).
1
Use the tip of a ball-point pen or other small object to press the button.
Use the TIMER SET ( / ) buttons (Fig. 5 O) to
2
adjust the clock to the current time.
button: Press to advance the time.
button: Press to reverse the time.
CAUTION!
Take care to prevent infants from acci-
●
dentally swallowing batteries.
When not using the Remote Control-
●
ler for an extended period, remove the
batteries to avoid possible leakage and
damage to the unit.
If leaking battery fl uid comes in contact
●
with your skin, eyes, or mouth, immediately wash with copious amounts of
water, and consult your physician.
Dead batteries should be removed imme-
●
diately and disposed of properly, either
in a battery collection receptacle or to the
appropriate authority.
Do not attem pt to recharge dry batteries.
●
Never mix new and used batteries, or
batteries of different types.
Batteries should last about one year
under normal use. If the Remote Controller's operating range becomes
appreciably reduced, replace the batteries and press the RESET button with
the tip of a ballpoint pen or other small
object.
(Each time the buttons are pressed, the time will be advanced/reversed
in five-minute increments; hold the buttons depressed to change the
time quickly in ten-minute increments.)
Press the CLOCK ADJUST button (Fig. 5 P) again.
3
This completes the time setting and starts the clock.
To Use the Remote Controller
The Remote Controller must be pointed at signal receiver (Fig. 3 4) to operate
●
correctly.
Operating Range: About 23ft (7 m).
●
When a signal is properly received by the indoor unit, a beeping sound will be
●
heard.
If no beep is heard, press the Remote Controller button again.
●
Remote Controller Holder
Insert
Press in
Screws
Slide up
Pull out
1 Mount the Holder. 2 Set the Remote Controller.
En-5
3 To remove the Remote Con-
troller (when use at hand).
Loading...