Fujitsu 735Dx, 755Tx, 765Tx, LIFEBOOK 700 SERIES User Manual
COPYRIGHT
Fu j i t su™PC Corpora ti on has made every effort to
en su re the acc u racy and com p l eteness of this doc u m en t .
However,as on going devel opm ent efforts are con ti n u a lly improving the capabi l i ties of our produ ct s ,we
cannot guara n tee the acc u racy of the con tents of t h i s
doc u m en t .We disclaim liabi l i ty for errors ,om i s s i on s ,
or futu re ch a n ge s .
LifeBook, Fujitsu,and the Fujitsu logo are trademarks
of Fujitsu Limited.
The fo ll owing are regi s tered tradem a rks of
IBM Corpora ti on :I B M ,IBM PC AT,IBM PS/2.
The fo ll owing are regi s tered tradem a rks of
Mi c ro s oft Corpora ti on :M S ,M S - DO S ,Wi n dows 95.
PCMCIA is a tradem a rk of the Pers onal Com p uter
Mem ory Ca rd In tern a ti onal As s oc i a ti on .
P h oenix and the Phoenix logo are regi s tered
tradem a rks of P h oenix Tech n o l ogi e s ,L td .
Pentium is a registered trademark and
MMX technology is a trademark of Intel Corporation.
P C - Doctor is a tradem a rk of w a ter ga te . s of t w a re . i n c .
Sof t PEG is a regi s tered tradem a rk of
Com p u Core Mu l ti m edia In c .
LapLink is a regi s tered tradem a rk of
Traveling Sof t w a re In c .
Au d i o Rack is
a regi s tered tradem a rk of
ESS Tech n o l ogy,In c .
Mega P h one is a regi s tered tradem a rk of
Cypress Re s e a rch Corpora ti on
All other tradem a rks men ti on ed herein are the
property oft h eir re s pective own ers .
We cannot guara n tee the acc u racy ofthe con tents of
this doc u m en t .We disclaim liabi l i ty for errors ,
om i s s i on s ,or futu re ch a n ge s .
© Copyri ght 1996 Fu j i t su PC Corpora ti on .All ri gh t s
re s erved .No part of this publ i c a ti on may be cop i ed ,
reprodu ced ,or tra n s l a ted , wi t h o ut pri or wri t ten
con s ent of Fu j i t su PC Corpora ti on .No part of t h i s
p u bl i c a ti on may be stored or tra n s m i t ted in any
el ectronic form wi t h o ut the wri t ten con s ent of
Fu j i t su PC Corpora ti on .
D E C LA RATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name: Fujitsu PC Corporation
Address: 598 Gibraltar Drive
Milpitas,CA 95035
Telephone: (408) 935-8800
Declares that product: Model:LifeBook 735Dx.
LifeBook 755Tx.
LifeBook 765Tx.
Complies with Part 15
of the FCC Rules.
This devi ce complies with Pa rt 15 of the FCC ru l e s .
Opera ti ons is su bj ect to the fo ll owing two con d i ti on s :
(1) This devi ce must not be all owed to cause harm f u l
i n terferen ce , (2) This devi ce must accept any interferen ce received , i n cluding interferen ce that may cause
u n de s i red opera ti on .
D avid Woo Fu j i t su 9 / 2 3 / 9 7
C A U T I O N
Changes or modification not expressly appro v e d
by Fujitsu PC Corporation could void this user’s
authority to operate the equipment.
S h i el ded intercon n ect cables must be em p l oyed wi t h
this equ i pm ent to en su re com p l i a n ce with the pertin ent RF em i s s i on limits governing this devi ce .
Notice to Users of the US Telephone Network
The LifeBook™700 Series notebook computers are
supplied with an internal modem which complies
with Part 68 of the FCC rules.On this notebook is
a label that contains the FCC Registration Number
and the Ringer Equivalence Number (REN) for this
equipment among other information. If requested,
the user must provide their telephone company with
the following information:
1. The telephone number to which the notebook
is connected.
2. The Ringer Equivalence Number (REN) for
this equipment.
3. That the equipment requires a standard modular
jack type USOC RJ-11C which is FCC
Part 68 compliant.
4. The FCC Registration Number.
This equ i pm ent is de s i gn ed to be con n ected to the
tel eph one net work or premises wi ring using a standard
m odular jack type USOC RJ-11C wh i ch is FCC Pa rt 68
compliant and a line cord bet ween the modem and the
tel eph one net work with a minimum of 2 6 AWG .
The REN is used to determine the nu m ber of devi ce s
that you may con n ect to your tel eph one line and sti ll
h ave all of those devi ces ring wh en your nu m ber is
c a ll ed .Too many devi ces on one line may re sult in
f a i lu re to ring in re s ponse to an incoming call . In most,
but not all ,a r eas the sum of the RENs ofa ll of t h e
devi ces should not exceed five (5.0).To be certain of
the nu m ber of devi ces you may con n ect to your line,
as determ i n ed by the RENs,con t act your local
tel eph one com p a ny.
If this equipment causes harm to the telephone network, your telephone company may discontinue your
service temporarily.If possible,they will notify you
in advance. If advance notice is not practical they will
notify you as soon as possible. You will also be advised
of your right to file a complaint with the FCC.
This fax modem also complies with fax branding
requirements per FCC Part 68.
Your telephone company will probably ask you to disconnect this equipment from the telephone network
until the problem is corrected and you are sure that
the equipment is not malfunctioning. This equ i pm en t
m ay not be used on coin servi ce tel eph ones provi ded
by your tel eph one com p a ny.Con n ecti on to party lines
is su bj ect to state tariffs .Con t act your state’s publ i c
uti l i ty com m i s s i on ,p u blic servi ce com m i s s i on or corpora ti on com m i s s i on for more inform a ti on .
FCC NOTICES
Notice to Users of Radios and Television
These limits are de s i gn ed to provi de re a s on a ble pro tecti on against harmful interferen ce in a re s i den tial install a ti on . This equ i pm ent gen era te s ,u s e s ,and can rad i a te
radio frequ ency en er gy and,i f not install ed and used
in accord a n ce with the instru cti on s ,m ay cause harm f u l
i n terferen ce to radio com mu n i c a ti on s .However,t h ere
is no guara n tee that interferen ce wi ll not occur in a
p a rticular install a ti on .If this equ i pm ent does cause
h a rmful interferen ce to radio or tel evi s i on recepti on ,
wh i ch can be determ i n ed by tu rning the equ i pm ent
off and on ,the user is en co u ra ged to try to correct the
i n terferen ce by one or more of the fo ll owing measu re s :
■
Reori ent or rel oc a te the receiving anten n a .
■
In c rease the sep a ra ti on bet ween the equ i pm ent
and receiver.
■
Con n ect the equ i pm ent into an out l et that is on
a different circuit than the receiver.
■
Consult the dealer or an experienced radio/TV
technician for help.
This equ i pm ent inclu des autom a tic dialing capabi l i ty.
Wh en programming and/or making test calls to
em er gency nu m bers :
■
Remain on the line and briefly explain to the
dispatcher the reason for the call.
■
Perform such activities in off-peak hours, such
as early morning or late evening.
FCC rules pro h i bit the use ofn on - h e a ring aid
com p a ti ble tel eph ones in the fo ll owing loc a ti ons
or app l i c a ti on s :
■
All public or semipublic coin-operated or credit
card telephones.
■
E l eva tors ,h i g hw ays , tu n n els (autom obi l e ,su bw ay,
ra i l road or pede s trian) wh ere a pers on wi t h
i m p a i red hearing might be isolated in an em er gen c y.
■
Places where telephones are specifically installed
to alert emergency authorities such as fire, police
or medical assistance personnel.
■
Hospital rooms,residential health care facilities,
convalescent homes and prisons.
■
Workstations for the hearing impaired.
■
Hotel,motel or apartment lobbies.
■
Stores where telephones are used by patrons
to order merchandise.
■
Public transportation terminals where telephones
are used to call taxis or to reserve lodging or
rental cars.
■
In hotel and motel rooms as at least ten percent
of the rooms must contain hearing aid compatible
telephones or jacks for plug-in hearing aid compatible telephones which will be provided to hearing
impaired customers on request.
DOC (INDUSTRY CANADA) NOTICES
Notice to Users of Radios and Television
This Class B digital app a ra tus meets all requ i rem ents
of the Ca n adian In terferen ce - Causing Equ i pm en t
Reg u l a ti on s .
CET app a reil nu m é ri que de la class B re s pecte to utes
les ex i gen ce du Régl em ent sur le matérial bro u i ll eur
du Ca n ad a .
Notice to Users of the Canadian
Telephone Network
The Canadian Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications network protective,operational and safety requirements.
The Department does not guarantee the equipment
will operate to the user’s satisfaction.
The Life Book 700 Series notebook com p uters are
su pp l i ed with an internal modem wh i ch complies
with the In du s try Ca n ada certi fi c a ti on standards for
tel ecom mu n i c a ti on net work pro tecti on and safety
requ i rem en t s .Before con n ecting this equ i pm ent to
a tel eph one line the user should en su re that it is perm i s s i ble to con n ect this equ i pm ent to the local tel e com mu n i c a ti on fac i l i ti e s .The user should be aw a re
that com p l i a n ce with the certi fi c a ti on standards doe s
not prevent servi ce degrad a ti on in some situ a ti on s .
Rep a i rs to tel ecom mu n i c a ti on equ i pm ent should be
m ade by a Ca n adian aut h ori zed mainten a n ce fac i l i ty.Any
rep a i rs or altera ti ons not ex pre s s ly approved by Fu j i t su
™
PC Corpora ti on or any equ i pm ent failu res may give the
tel ecom mu n i c a ti on com p a ny cause to request the user to
d i s con n ect the equ i pm ent from the tel eph one line.
The con n ecting arra n gem ent code for this equ i pm ent is
C A 1 1 A .
The Load Nu m ber is 3.
The Load Nu m ber assign ed to each tel eph one term i n a l
devi ce den o tes the percen t a ge of the total load to be
con n ected to a tel eph one loop or circuit wh i ch is used
by the devi ce to prevent overl oad i n g.The term i n a ti on
on a loop may consist ofa ny com bi n a ti on of devi ce s
su ch that the total of the load nu m bers ofa ll devi ce s
does not exceed 100.
Avis Aux Utilisateurs Du Réseau
Téléphonique Canadien
L’étiquette canadienne Industrie Canada identifie
l’équipement certifié. Cette certification signifie
que l’équipement satisfait certaines normes de
protection,d’exploitation et de sécurité des réseaux
de télécommunications. Le département ne garantit
pas le fonctionnement de l’équipement à la
satisfaction de l’utilisateur.
La série Life Boo k™500 po s s è dent un modem
i n terne con forme aux normes de certi fi c a ti on
d ’ In du s trie Ca n ada pour pro t é ger les réseaux
de télécom mu n i c a ti ons et sati s f a i re aux normes
de sécuri t é .Avant de con n ecter cet équ i pem ent à une
l i gne téléph on i qu e ,l ’ uti l i s a teur doit véri fi er s’il est
permis de con n ecter cet équ i pem ent aux install a ti on s
de télécom mu n i c a ti ons loc a l e s .L’ uti l i s a teur est averti
que même la con formité aux normes de certi fi c a ti on
ne peut dans certains cas em p ê ch er la dégrad a ti on
du servi ce .
Les répara ti ons de l’équ i pem ent de télécom mu n i c a ti on s
doivent être effectuées par un servi ce de mainten a n ce
a gréé au Ca n ad a .To ute répara ti on ou mod i fi c a ti on ,qu i
n’est pas ex pre s s é m ent appro uvée par Fu j i t su PC Corp. ,
C A U T I O N
For safety, users should ensure that the
electrical ground of the power utility, the
telephone lines and the metallic water
pipes are connected together. Users
should NOT attempt to make such
connections themselves but should
contact the appropriate electric inspection authority or electrician. This may be
particularly important in rural areas.
ou to ute défaill a n ce de l’équ i pem ent peut en tra î n er
la com p a gnie de télécom mu n i c a ti ons à ex i ger que
l ’ uti l i s a teur décon n ecte l’équ i pem ent de la ligne
t é l é ph on i qu e .
Le code d’arra n gem ent de con n ex i on de cet
é qu i pem ent est CA11A.
Le nu m é ro de ch a r ge est 3.
Le nu m é ro de ch a r ge assigné à ch a que terminal
t é l é ph on i que indique le po u rcen t a ge de la ch a r ge
totale po uvant être con n ecté à une bo u cle ou à un
c i rcuit téléph on i qu e ,utilisé par ce péri ph é ri que afin de
pr é venir to ute su rch a r ge .La term i n a i s on d’une bo u cl e
peut être con s ti tuée de n’ i m porte qu elle com bi n a i s on
de péri ph é ri ques de sorte que le total de nu m é ros de
ch a r ge de tous les péri ph é ri ques n’ exc è de pas 100.
UL NOTICE (FOR AUTHORIZED REPAIR TECHNICIANS ONLY)
C AU T I O N :For con ti nu ed pro tecti on against risk of fi re , rep l ace on ly
with the same type and ra ting fuse.
C AU T I O N :D a n ger of ex p l o s i on if CMOS battery is incorrect ly rep l aced .
Rep l ace on ly with the same or equ iva l ent type recom m en ded by the
m a nu f actu rer.Di s pose of u s ed batteries according to the manu f actu rer ’ s
i n s tru cti on .
WA R N I N G : CMOS and NiCAD batteries may ex p l ode ifm i s tre a ted .
Do not rech a r ge ,d i s a s s em ble or dispose of in fire .
A V E R T I S S E M E N T
Pour assurer la sécurité, les utilisateurs
doivent vérifier que la prise de terre du serv i c e
d’électricité, les lignes téléphoniques et les
conduites d’eau métalliques sont connectées
ensemble. Les utilisateurs NE doivent PAS tenter
d’établir ces connexions eux-mêmes, mais
doivent contacter les services d’inspection
d’installations électriques appropriés ou un
électricien. Ceci peut être part i c u l i è re m e n t
i m p o rtant en régions ru r a l e s .
T a b l e o f C o n t e n t s
T a b l e o f C o n t e n t s
ii
PREFACE . . . . . . . . . . . . . . . . . . . . v
SECTION ONE
SETTING UP YOUR
LIFEBOOK 700 SERIES
Unpacking. . . . . . . . . . . . . . . . . . . . 2
Overview of Features . . . . . . . . . . . . . . 3
Component Identification . . . . . . . . . . . 4
Top and Front Components . . . . . . . . . . 6
Left Side Panel Components . . . . . . . . . . 7
Right Side Panel Components . . . . . . . . . 7
Rear Panel Components . . . . . . . . . . . . 8
Bottom Components . . . . . . . . . . . . . 10
Power Sources . . . . . . . . . . . . . . . . . 10
Data Security . . . . . . . . . . . . . . . . . 11
Starting Your Notebook for the First Time. . 12
User Registration . . . . . . . . . . . . . . . 14
Learning AboutYour Operating System
and Application Software. . . . . . . . . . 15
SECTION TWO
USING YOUR LIFEBOOK 700 SERIES
Display Panel . . . . . . . . . . . . . . . . . 18
Adjusting the Keyboard Angle . . . . . . . . 18
Status Indicator Panel. . . . . . . . . . . . . 19
Power On . . . . . . . . . . . . . . . . . . . 23
Power Off . . . . . . . . . . . . . . . . . . . 24
Restarting the System . . . . . . . . . . . . . 25
Fujitsu Welcome Center. . . . . . . . . . . . 26
Batteries . . . . . . . . . . . . . . . . . . . . 26
Integrated ErgoTrac Pointing Device. . . . . 30
Using the Keyboard . . . . . . . . . . . . . . 32
Volume Control . . . . . . . . . . . . . . . . 34
Floppy Disk Drive . . . . . . . . . . . . . . . 34
CD-ROM Drive . . . . . . . . . . . . . . . . 36
Hard Drive. . . . . . . . . . . . . . . . . . . 38
Power Management . . . . . . . . . . . . . . 38
Internal Modem . . . . . . . . . . . . . . . . 46
Infrared Port. . . . . . . . . . . . . . . . . . 46
Pre-Installed Software. . . . . . . . . . . . . 47
SECTION THREE
CONFIGURING YOUR
LIFEBOOK 700 SERIES
Boot Sequence . . . . . . . . . . . . . . . . . 52
Identifying the Drives . . . . . . . . . . . . . 52
BIOS Setup Utility. . . . . . . . . . . . . . . 53
Navigating Through the Setup Utility . . . . 55
Main Menu – Setting System Parameters . . 56
Advanced Menu – Setting Device Controls . 65
Security Menu – Setting Passwords. . . . . . 77
Power Savings Menu – Setting Power
Management Controls . . . . . . . . . . . 81
Boot Menu. . . . . . . . . . . . . . . . . . . 88
Exit Menu – Leaving the Setup Utility . . . . 90
Setting Up Your Save-To-Disk
File Allocation. . . . . . . . . . . . . . . . 93
T a b l e o f C o n t e n t s
L i fe B oo k 5 0 0 S e ri es fr o m F u ji t su
iii
SECTION FOUR
USER INSTALLABLE FEATURES
Multi-function Bay Devices . . . . . . . . . 97
PC Cards . . . . . . . . . . . . . . . . . . 103
Parallel Port Devices . . . . . . . . . . . . 105
Serial Port Devices . . . . . . . . . . . . . 105
USB Devices. . . . . . . . . . . . . . . . . 105
Microphone. . . . . . . . . . . . . . . . . 105
Stereo Line In Devices . . . . . . . . . . . 105
Headphones. . . . . . . . . . . . . . . . . 105
Telephone Lines. . . . . . . . . . . . . . . 106
Mouse or Keyboard. . . . . . . . . . . . . 106
External Monitor . . . . . . . . . . . . . . 106
Theft Prevention Lock . . . . . . . . . . . 106
External Installation of the
Floppy Disk Drive . . . . . . . . . . . . 107
Memory Upgrade Module . . . . . . . . . 108
Landock . . . . . . . . . . . . . . . . . . . 111
Port Replicator . . . . . . . . . . . . . . . 112
SECTION FIVE
TROUBLESHOOTING
Identifying the Problem . . . . . . . . . . . 118
Specific Problems . . . . . . . . . . . . . . 119
Power On Self Test Messages . . . . . . . . 138
Emergency CD-ROM
Tray Release . . . . . . . . . . . . . . . . 141
Modem Setup and Commands . . . . . . . 141
Restoring Your Pre-installed Software
from CD-ROM . . . . . . . . . . . . . . 141
SECTION SIX
CARE AND MAINTENANCE
Care and Maintenance. . . . . . . . . . . . 144
Caring for Your Notebook. . . . . . . . . . 144
Increasing Battery Life . . . . . . . . . . . . 145
Caring for Your Batteries . . . . . . . . . . 145
APPENDIX A SPECIFICATIONS
Warranty . . . . . . . . . . . . . . . . . . . 148
LifeBook™735Dx Specifications . . . . . . . 148
LifeBook 755Tx Specifications . . . . . . . 151
LifeBook 765Tx Specifications . . . . . . . 154
Approvals. . . . . . . . . . . . . . . . . . . 157
Popular Accessories . . . . . . . . . . . . . 157
APPENDIX B GLOSSARY . . . . . . 159
INDEX . . . . . . . . . . . . . . . . . . . 167
L i f e B o o k 7 0 0 Se r i e s f r o m F u j i t s u
™
P r e f a c e
P r e f a c e
vi
PREFACE
The LifeBook 700 Series from Fujitsu™PC
Corporation is a powerful notebook computer.
It is powered by an Intel Pentium®microprocessor with MMX™technology,has a built-in
color display,a CD-ROM drive and brings
the computing power of desktop personal
computers (PCs) to a portable environment.
This manual explains how to operate your
LifeBook 700 Series’ hardware and built-in
system software. The LifeBook 700 Series is
compatible with the IBM®PC AT.It comes
with Windows®95 pre-installed.
A LifeBook 700 Series is a completely selfcontained unit witha dual scan passive-matrix
(DSTN) or an active-matrix (TFT) color LCD
display. It has a powerful interface that enables
it to support a variety of optional features.
(Figure P-1.)
CONVENTIONS USED IN THE GUIDE
Screen examples in this manual are intended as
examples only,and screen and file names may
differ in actual use.
Messages displayed by the LifeBook 700 Series
appear in C o u r i e r type.
Example: Shutdown the computer?
Keyboard keys are shown in boldface
Helvetica type.
Example: Fn, F1, Esc,and Ctrl.
Pages with additional information about a specific topic are cross-referenced within the text.
Example: (See page xx.)
P O I N T
The point icon highlights information
that will enhance your understanding of
the subject material.
C A U T I O N
The caution icon highlights information
that is important to your safety, to the
safe operation of your computer, or to
the integrity of your files. Please read all
caution information carefully.
L i f e B o o k 7 0 0 S e r i e s f r o m F u j i t s u
L i f eB oo k 7 0 0 S e ri es fr o m F uj i t su
vii
Figure P-1 LifeBook 700 Series
with Both Fujitsu and
Third Party Options
S e t t i n g U p Yo u r Li f eB oo k 7 0 0 S e r ie s
S e c t i o n O n e
Unpacking . . . . . . . . . . . . . . . . . . . 2
Overview of LifeBook 700 Series Features . . . 3
Component Identification . . . . . . . . . . . 4
Top and Front Components . . . . . . . . . . 6
Left Side Panel Components . . . . . . . . . . 7
Right Side Panel Components . . . . . . . . . 7
Rear Panel Components . . . . . . . . . . . . 8
Bottom Components . . . . . . . . . . . . . 10
Power Sources . . . . . . . . . . . . . . . . 10
Data Security . . . . . . . . . . . . . . . . . 11
Starting Your Notebook for the First Time . . 12
User Registration . . . . . . . . . . . . . . . 14
Learning About Your Operating System
and Application Software. . . . . . . . . . 15
S e c t i o n O n e
2
Section One
SETTING UP YOUR LIFEBOOK
700 SERIES FROM FUJITSU
This section describes how to set up your
LifeBook 700 Series from Fujitsu. We strongly
recommend that you read it before using your
notebook – even if you are already familiar with
notebook computers.
UNPACKING
When you receive your notebook,unpack it
carefully,and compare the parts you have
received with the items listed below.
For a standard configuration you should have:
■
LifeBook 700 Series from Fujitsu.
(Figure 1-1.)
■
AC adapter with AC power cord (located in
the accessories box). (Figure 1-2.)
■
Modular Lithium ion battery (already
installed in Multi-function Bay 1 of your
notebook).
■
Modular 20-speed maximum CD-ROM drive
(already installed in Multi-function Bay 2 of
your notebook).
■
Modular 3.5" floppy disk drive (located in the
accessories box). (Figure 1-4.)
■
Device adapter for Multi-function Bay 2
(located in the accessories box.) (Figure 1-3.)
■
RJ-11 cable (located in the accessories box).
■
Getting Started Guide.
■
User’s Guide.
■
Microsoft Windows 95 Manual.
■
Registration card and customer information
pack.
■
Recovery CD-ROM (located in the accessories box).
■
Additional equipment and/or documentation
depending on the option package you have
purchased.
Figure 1-1 LifeBook 700 Series Notebook
Figure 1-2 AC Adapter Unit
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
L i fe B oo k 7 0 0 S e ri es fr o m F u ji t su
3
Once you have checked and confirmed that
your notebook system is complete, connect the
AC adapter and follow the instructions on page
12-14 to accept the conditions for using the
LifeBook 700 Series. When you have completed
the Conditions of Use process please register
your notebook. (See page 14.)
OVERVIEW OF LIFEBOOK
700 SERIES FEATURES
The LifeBook 700 Series is a compact, yet
powerful notebook computer available with
standard features including: (See Appendix A,
pages 148-157, for detailed information on
individual models.)
■
133MHz,150MHz or 166MHz Intel Pentium
processor with MMX technology.
■
16MB or 32MB SDRAM standard, expand-
able to 80MB or 96MB.
■
12.1" dual-scan (DSTN) or active-matrix
(TFT) color display with 800 x 600 resolution.
■
2MB EDO video RAM.
■
Built-in 1.6GB, 2GB or 3.2GB hard drive.
■
Dual Multi-function bays which support
the following:
■
3.5" floppy disk drive
( i n clu ded with all model s ) .
■
20-speed maximum CD-ROM drive
(included with all models) (for Bay 2 only).
■
Optional second 3.2GB hard drive
(for Bay 2 only).
■
Lithium ion battery
(one included with all models).
■
Optional second Lithium ion battery.
■
Internal 56K fax/data/voice modem with
built-in telephony and DSVD support.
Figure 1-3 Device Adapter for Multi-function Bay 2
Figure 1-4 Floppy Disk Drive
C A U T I O N
Your internal modem is designed to
allow faster downloads from K56flex
compliant digital sources. Maximum
achievable download transmission rates
may not reach 56kbps and will vary
with line conditions
S e c t i o n O n e
4
■
Full audio and video features:
■
16-bit SoundBlaster-compatible
sound chip.
■
3D-Stereo for multiple speaker effect.
■
Zoomed Video support for full motion
video acceleration.
■
Built-in stereo speakers.
■
Built-in mono microphone.
■
Stereo line in jack.
■
Stereo headphone jack.
■
Microphone jack.
■
Two Type II/one Type III PC Card slot.
■
Fast IrDA (4Mbps) compatible infrared port
for wireless data transfer.
■
Integrated ErgoTrac pointing device for
superb comfort and cursor control.
■
External monitor support with simultaneous
display capabilities.
■
“No re-learning”,full-size keyboard with
three dedicated Windows 95 keys.
■
Hot swap connection for an external keyboard or an external mouse.
■
USB device support.
■
Bridge battery for warm-swapping capabilities for batteries.
■
Standard pre-installed software:
■
Microsoft Windows 95 operating system.
■
LapLink for file transfers via modem, cable
or infrared port.
■
PC-Doctor for system diagnostics.
■
SoftPEG from CompCore,an MPEG-1
video player.
■
McAfeeVirusScan for virus protection.
■
ESS AudioRack for 3D-Stereo,audio CD
and other audio controls.
■
MegaPhone for telephone applications
including fax,dialing, and speakerphone.
Figure 1-5 Top and Front Panel
■
Some models may include additional
software.
COMPONENT IDENTIFICATION
For detailed specifications on each model refer
toAppendix A on pages 148-157.
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
L i fe B oo k 7 0 0 S e ri es fr o m F u ji t su
5
Figure 1-6 LifeBook 700 Series with Display Open
Display Panel
Status Indicator Panel
Keyboard
ErgoTrac Pointing Device
Multi-function Bay 1
Multi-function Bay 2
Closed Cover Switch
Suspend/Resume button
Built-in Microphone
Contrast Control
(Model 735Dx Only)
Brightness Control
Display Panel Latch
S e c t i o n O n e
6
TOP AND FRONT COMPONENTS
Display Panel Latch
This latch locks and releases the display panel.
When the display panel is released it pops up
slightly to make it easier to open.(Figure 1-6.)
Display Panel
This is a color LCD panel with back lighting for
the display of text and graphics. (Figure 1-6.)
Brightness Control
The brightness control adjusts the overall intensity of the display panel back lighting.
(Figure 1-6.)
Contrast Control (Model 735Dx only)
The contrast control (located just below the
brightness control) sets the ratio of the intensity of the light to dark areas of the display.
(Figure 1-6.)
Built-in Microphone
The built-in microphone allows mono audio
input to your notebook. (Figure 1-6.)
Status Indicator Panel
An LCD display of the status of the power state
and source, Suspend mode,battery charge (battery in either Multi-function Bay), floppy disk
drive activity,hard drive activity,CD-ROM
drive activity,PC Card activity,CapsLock,
NumLk and Scr Lk. (Figure 1-6.)
Suspend/Resume Button
The Suspend/Resume button allows you to suspend notebook activity without turning off the
notebook power,and to return it to an active
state. This feature saves power,and is particularly useful when the notebook is running only
on battery power. (See pages 38-46 and 81-87 for
more information on power management.)
(Figure 1-6.)
Closed Cover Switch
The closed cover switch turns off the LCD back
lighting when the display panel is closed, thus
saving power.(Figure 1-6.)
Keyboard
A full-size keyboard with dedicated Windows
95 keys for input into the notebook.
(Figure 1-6.)
ErgoTrac Pointing Device
The ErgoTrac pointing device is a joystick-like
cursor control system with two click buttons.
(Figure 1-6.)
Multi-function Bay One
This bay accommodates:
■
Lithium ion battery.
■
3.5" floppy disk drive.
Multi-function Bay Two
This bay accommodates:
■
20-speed maximum CD-ROM drive.
C A U T I O N
Be sure you know which settings are
active for your Suspend/Resume button
before you use it because misuse can
result in data loss. (See the Power
Savings Menu of the BIOS setup utility,
pages 81-87, for more information.)
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
L i fe B oo k 7 0 0 S e ri es fr o m F u ji t su
7
■
Lithium ion battery mounted in the device
adapter for Multi-function Bay 2 (a second
battery can be purchased separately for a dual
battery configuration).
■
Optional second 3.2GB hard drive (which
must be purchased separately).
■
3.5" floppy disk drive mounted in the device
adapter for Multi-function Bay 2.
LEFT SIDE PANEL COMPONENTS
PC Card Slot
The PC Card Slot allows you to install two Type
I or Type II PC Cards or one Type III PC Card.
(See pages 103-105 for more information on PC
Cards.) The button to the left of the card slot
locks the card(s) in place,and the b uttons
to the right of the slot eject the
card(s) from the slot. (Figure 1-7.)
Left Speaker
The built-in dual speakers output
stereo sound from the notebook.
(Figure 1-7 and Figure 1-8.)
RIGHT SIDE PANEL COMPONENTS
Theft Prevention Lock Slot
This is a slot that allows you to attach a physical
lock down device. (Figure 1-8.)
USB Port
This port allows you to connect Universal Serial
Bus devices, such as external game pads, pointing devices, keyboards and speakers.
(Figure 1-8.)
DC Power Jack
The DC power jack allows you to plug in the
AC adapter or the optional auto/airline adapter.
(Figure 1-8.)
C A U T I O N
Do not use your notebook with either of
the Multi-function bays empty. It may
damage your notebook.
Figure 1-7 LifeBook 700 Series Left Side Panel
PC Card Eject Buttons
Left SpeakerPC Card SlotsPC Card Lock
Figure 1-8 LifeBook 700 Series Right Side Panel
Stereo Line
In Jack
Microphone
Jack
External Floppy
Disk Drive Port
Power Switch
Theft Prevention
Lock Slot
USB
Port
DC Power JackRight SpeakerPort Cover
PS/2
Port
Volume
Control
Headphone Jack
S e c t i o n O n e
8
Power Switch
This switch is the main power switch for your
notebook.(Figure 1-8.)
Right Speaker
The built-in dual speakers output stereo sound
from the notebook. (Figure 1-7 and Figure 1-8.)
External Floppy Disk Drive Port
A port for attaching an optional external floppy
disk drive. This allows you to connect an
optional separate floppy disk drive when the
Multi-function bays are being used for other
purposes. (Figure 1-8.)
PS/2 Port
The port allows you to connect an external PS/2
keyboard, mouse, or numeric keypad.
(Figure 1-8.)
Microphone Jack
The microphone jack allows you to connect an
external mono microphone. (Figure 1-8.)
Stereo Line In Jack
The stereo line in jack allows you to connect an
external audio source to your notebook,like an
audio cassette player.This jack will not support
an external microphone. (Figure 1-8.)
Headphone Jack
You can connect headphones or powered
external speakers to the headphone jack.
(Figure 1-8.)
Volume Control
The volume control is a knob which provides
manual control of the sound level of all audio
output from your notebook. (Figure 1-8.)
REAR PANEL COMPONENTS
RJ-11 Jack
This is the jack for attaching a telephone line to
the internal modem. This jack can be used with
the connector cover closed and the sliding panel
in the connector cover slightly opened for
added convenience.(Figure 1-9.)
C A U T I O N
There are also software volume controls.
The knob setting and the software settings
will interact. Software volume off will
override the knob setting and the software
volume setting will control the maximum
knob setting. (See Volume Control on
page 34 for more information.)
Figure 1-9 LifeBook 700 Series Rear Panel
RJ-11 Jack
Docking Port
Serial Port
Parallel Port
External
Monitor Port
Infrared Port
Connector Cover
Slide Panel
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
L i fe B oo k 7 0 0 S e ri es fr o m F u ji t su
9
Docking Port
This port is for connection to an optional port
replicator or docking station. The connector
cover must be closed and the sliding panel fully
opened to reveal the docking port and the
RJ-11 jack when connecting a port replicator
or a docking station. (Figure 1-9.)
Serial Port
The serial port allows you to connect serial
RS-232C devices, such as serial printers or
serial scanners. (This is also sometimes
referred to as a COM port.) (Figure 1-9.)
Parallel Port
The parallel port allows you to connect
parallel devices, such as a parallel printer to
your notebook. (This is also sometimes
referred to as a LPT port.) (Figure 1-9.)
External Monitor Port
This port allows you to connect an external
VGA or SVGA CRT monitor. (Figure 1-9.)
Infrared Port
The fast IrDA (4Mbps) compatible port
allows you to communicate with another IrDA
compatible infrared device without a cable.
(See pages 46-47 for more information.)
(Figure 1-9.)
C A U T I O N
The internal modem is not intended for
use with Digital PBX systems. Do not
connect the internal modem to a digital
PBX as it may cause serious damage to
the internal modem or your entire notebook. Consult your PBX manufacturer’s
documentation for details. Some hotels
have Digital PBX systems. Be sure to find
out BEFORE you connect your modem.
C A U T I O N
The cover – which closes over the ports
on the rear of the notebook – can be
damaged if it is left open when the
notebook is moved around.
Figure 1-10 LifeBook 700 Series Bottom
Memory
Upgrade
Compartment
Docking Alignment
Receptacle
Tilt
Adjustment
Feet
Main Unit
and
Configuration
Label
Multi-function Bay 1
Release Button
Multi-function Bay 1
Multi-function Bay 2
Docking Alignment
Receptacle
Multi-function Bay 2
Release Button
S e c t i o n O n e
10
BOTTOM COMPONENTS
Tilt Adjustment Feet
These are a pair of feet which flip down and
hold the back of the keyboard approximately
6° higher than the front when resting on a flat
surface. They are designed to make using your
notebook keyboard more comfortable.
(Figure 1-10.)
Main Unit and Configuration Label
This label shows the model number and other
information about your notebook. In addition
the configuration portion of the label has the
serial number and manufacturer information
that you will need to give your support representative so that he or she can help you.It identifies the exact version of various components
of your notebook. (Figure 1-10.)
Memory Upgrade Compartment
This compartment houses the memory upgrade
module which allows you to expand the system
memory capacity of your notebook. (See pages
108-110 for more information on installing
added memory capacity.) (Figure 1-10.)
Multi-function Bay 1 Release Button
This is the release to allow removal and installation of devices in the Multi-function Bay 1.
(Figure 1-10.)
Multi-function Bay 1
This compartment is accessed from the front of
your notebook. (See Figure 1-6 on page 5.)
Multi-function Bay 2 Release Button
This is the release to allow removal and installation of devices in the Multi-function Bay 2.
(Figure 1-10.)
Multi-function Bay 2
This compartment is accessed from the front of
your notebook. (See Figure 1-6 on page 5.)
POWER SOURCES
Your notebook has four possible power sources:
the primary Lithium ion battery; an optional
dual Lithium ion battery configuration; the AC
adapter; or an optional auto/airline adapter.
Connecting the Power Adapters
The AC adapter or an optional auto/airline
adapter provides power for operating your
notebook and charging the batteries.
(Figure 1-11.)
To Connect the ACAdapter
1. Plug the DC Output cable of the AC
adapter into the DC Power jack on the
right side panel of your notebook.
2. Plug the AC adapter into an AC
electrical outlet.
Figure 1-11 Connecting the AC Adapter
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
L i fe B oo k 7 0 0 S e ri es fr o m F u ji t su
11
To Connect the Optional Auto/airline Adapter
1. Plug the DC Output cable into the DC
Power jack on the right side panel of your
notebook.
2. Plug the auto/airline adapter plug into the
cigarette lighter of a car or other vehicle
with the ignition key in the On or the
Accessories position or into the DC Power
jack on an airplane seat.
To Switch FromAC Adapter Power
To Battery Power
1. Be sure that you have at least one charged
battery installed.
2. Remove the AC or auto/airline adapter.
DATA SECURITY
Your LifeBook 700 Series has a built-in hardware control password security feature that
allows you to protect the data stored in the
notebook from unauthorized access. Your
operating system and some applications have
software control password security features that
allow you to protect all or portions of the data
stored in the notebook from unauthorized access.
Hardware Data Security Features
When you are using your notebook built-in
hardware control password to gain access to the
notebook the actual password will not appear
on the screen. This is a safety precaution. The
hardware control security parameters are set
from the BIOS setup utility. (See Security Menu
on pages 77-80 for more information on setting
and clearing passwords and enabling and
disabling built-in security features.)
Software Data Security Features
The operating system and some applications
have security features that are independent of
the built-in hardware protection features that
are controlled from the BIOS. See your software
documentation for more information about
these features.
C A U T I O N
The primary Lithium ion battery is not
charged when you purchase your notebook. Initially you will need to connect
the AC adapter or the auto/airline adapter
to use it. If you purchase a second Lithium
ion battery it will not be charged when
you get it. You will need to charge it prior
to use. It can take up to three (3) hours to
charge a single battery if your notebook
is turned off or is in Suspend mode. If
your notebook is in use it can take up
to nine (9) hours or more to charge a
single battery.
S e c t i o n O n e
12
C A U T I O N
Make sure you memorize your passwords, both hardware and software.
If you forget, you may not be able to use
the notebook, and you will have to contact your service provider and arrange to
have them reset the hardware system
password. See your software documentation for what to do if you forget your
software security password(s).
STARTING YOUR NOTEBOOK
FOR THE FIRST TIME
Booting the System
The first time that you turn on your notebook
you will need to attach your AC adapter
because the battery is not charged when you get
your machine.We strongly recommend that
you not attach any other external devices and
do not put any CD or floppy disk in your drives
until you have gone through the initial power
on sequence.
When you turn on your notebook for the first
time it will display a Fujitsu logo on the screen.
If you do nothing the system will read the hard
drive for the operating system software, flash
the notebook configuration information on the
screen, and then the Windows 95 Setup Wizard
Screen will appear. (See Power On on pages 23-
24 for additional help.) You will then be stepped
through the condition of use process.You must
complete this initial process before you will be
able to use your notebook. (If you wish to
access the BIOS setup utility before you go
through the condition of use process you must
press the F2 key while the Fujitsu logo is still
visible. If you press the Esc key while the
Fujitsu logo is still present you will get a dialog
box which will allow you to select which drive
is to be used for finding the operating system.)
If you turn off the power without using the on
screen C a n c e l button you will get an error
message when you start your notebook again.
Conditions of Use Process
The first time you start your notebook you
must confirm your acceptance of the copyright
limitations for your pre-installed software.
After you complete the Condition of Use
process these screens will not appear again.
There are 6 screens to read carefully and
respond to.
You cannot use your notebook until this
Condition of Use process is completed.The
bottom of each screen has a < B a c k button, a
N e x t > Button and a C a n c e l button which are
activated by the integrated ErgoTrac cursor
control and button click. The < B a c k button
will return you to the previous screen. The
N e x t > button activates any choices or
C A U T I O N
Software security feature passwords may
not be the same as the hardware security
passwords. Be sure you know which
features are controlled from software
and which from hardware or you may
lock yourself out of your own data or
lock up your hardware and not be able
to operate your notebook.
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
L i fe B oo k 7 0 0 S e ri es fr o m F u ji t su
13
information you have entered and takes you on
to the next screen. The C a n c e l button allows
you to stop the setup process.
If you stop the process your notebook will
start up at the beginning of the Windows 95
Setup Wizard.
The screens you will be required to respond to
are described with the required action.
User Information
Fill in your name and your company name as
you want the software licensed. To step from the
name blank to the company blank press the Tab
key.When the information has been entered
click on the N e x t > button. You will not be
allowed to continue until you makean entry.
License Agreement
Read the agreement carefully.You can scroll
through the text using the integrated ErgoTrac
pointing device to activate the scroll bar or use
the up arrow Õ and down arrow Ô keys to
move up and down the text one line at a time,
or use the Page Up and Page Down keys to
move the text one screen at a time. When you
finish reading you must point and click to
accept or reject the terms of the agreement and
then click on the N e x t > button.
Start Wizard
The Start Wizard screen will appear if you have
entered a valid product code. When you click
on the Finish button the display will flash various screens as the system identifies what hardware is installed and runs a virus check.
Time Zone
When your notebook has completely identified
all of the installed hardware it will display a
dialog box for entering which time zone you
wish to set the clock to.
Windows Messaging
Once you have selected a time zone you will see
a screen announcing that Windows messaging
is being set up.
Printer Setup
When the messaging setup is complete a dialog
box will appear for selecting which printer is to
be attached to your notebook.You do not have
to select a printer at this time. If you do not
wish to select a printer,click on the Cancel button. If you do wish to select a printer click on
the Next button and answer the questions.
P O I N T
If you reject the terms of the license
agreement you will be asked to review
the license agreement for information on
returning Windows 95 or to shut down
your notebook.
Certificate of Authenticity
Look in the box that your notebook came in
and you will find a Windows 95 Certificate of
Authenticity shrink wrapped with the Windows
95 Users manual.On the certificate you will
find a bar-code with a number above it. This is
your product code and the number you should
enter on the Certificate of Authenticity screen.
When you have entered the number exactly as
shown then click on the N e x t > button.
S e c t i o n O n e
14
Welcome to Windows 95
Once you have completed the printer setup or
chosen not to set up a printer at this time you
will see the Welcome screen forWindows 95.
You can choose: Windows Tour;What‘s New;
Online Registration; or Close. You are now in
the Windows 95 operating system and the
Condition of Use process will not be repeated.
USER REGISTRATION
There are three ways to register your notebook.
1. The registration card provided in the box
with your LifeBook 700 Series that can be
filled out and mailed.
2. A registration form behind one of the
Fujitsu Welcome Center icons that can be
filled out on your notebook and sent in a
variety of ways,including printing and
mailing, faxing or e-mailing.
3. Telephone registration by calling the
Fujitsu PC service and support line at
1-800-8FUJITSU (1-800-838-5487).
P O I N T
You will find a Recovery CD-ROM packet
in your accessories box. Please store the
packet in a safe place in case there is a
loss of data and it becomes necessary
to re-install your operating system and
and/or application programs.
(See Restoring Your Pre - i n s t a l l e d
S o f t w a re from the Recovery CD-ROM
on page 141.)
C A U T I O N
There are two Fujitsu Welcome Center
icons on your notebook desktop, one for
use if you have a model 735Dx and the
other for use if you have a model 755Tx
or a model 765Tx. Be sure to use the
correct icon or your product registration
may be invalid. Choose carefully as using
the incorrect form will invalidate your
registration and may prevent you from
receiving technical support.
S e t t i n g U p Y o u r L i f e B o o k 7 0 0 S e r i e s
L i fe B oo k 7 0 0 S e ri es fr o m F u ji t su
15
LEARNING ABOUT YOUR OPERAT I N G
SYSTEM AND APPLICATION SOFTWA R E
Tutorials
All operating systems and most application
software have tutorials built-in. We highly recommend that you step through your tutorial
before you use an application even if you are
familiar with the same application on a different machine,an earlier version of the application, or a similar product.
Manuals
In the accessories box you will find manuals for
Windows 95 and other pre-installed software.
Software manuals of pre-installed software
that are not in the accessories box are available
online.See the help screens of your preinstalled software.We recommend that you
review these manuals for general information
on the use of these applications and to get a
basic understanding of what is covered in the
manual,and how it is organized,should
questions arise as you use the applications.
Using Your LifeBook 700 Series from Fujitsu
S e c t i o n T w o
Using Your LifeBook 700 Series from Fujitsu . 18
Display Panel . . . . . . . . . . . . . . . . . 18
Adjusting the Keyboard Angle . . . . . . . . 19
Status Indicator Panel. . . . . . . . . . . . . 19
Power On . . . . . . . . . . . . . . . . . . 23
Power Off . . . . . . . . . . . . . . . . . . 24
Restarting the System . . . . . . . . . . . . 25
Fujitsu Welcome Center . . . . . . . . . . . 26
Batteries . . . . . . . . . . . . . . . . . . . 26
Integrated ErgoTrac Pointing Device . . . . . 30
Using the Keyboard. . . . . . . . . . . . . . 32
Volume Control. . . . . . . . . . . . . . . . 34
Floppy Disk Drive . . . . . . . . . . . . . . . 34
CD-ROM Drive . . . . . . . . . . . . . . . . 36
Hard Drive . . . . . . . . . . . . . . . . . . 38
Power Managment . . . . . . . . . . . . . . 38
Internal Modem . . . . . . . . . . . . . . . 46
Infrared Port . . . . . . . . . . . . . . . . . 46
Pre-installed Software . . . . . . . . . . . . 47
S e c t i o n T w o
18
SECTION TWO
USING YOUR LIFEBOOK 700 SERIES
FROM FUJITSU
This section describes the indicators, buttons,
connections and operating modes of your
LifeBook 700 Series and their use.
DISPLAY PANEL
Opening the Display Panel
Lifting the latch releases the top of the display
panel from the front of the notebook body.
When the display panel is released it pops up
slightly to make it easier to open.Lift the display panel backward until the screen is at a
comfortable viewing angle. (Figure 2-1.)
Adjusting the Display Panel
When you turn on your notebook, you may
want to adjust the brightness level of the screen
for best visibility. To do this, adjust the brightness control slider on the right side of the display panel. (Figure 2-2.) You may need to adjust
the brightness periodically for different
operating environments.(For model 735Dx
only,you may also adjust contrast with a
contrast control slider that is just below the
brightness control.)
Figure 2-1 Opening the Display Panel
P O I N T
The higher the brightness level, the more
power the notebook will consume and
the faster your batteries will discharge.
For maximum battery life, make sure that
the brightness is set as low as possible.
Figure 2-2 Display Adjustments
Brightness Control
Brighter
Less Bright
Contrast Control
(Model 735Dx Only)
Higher Contrast
Less Contrast
U s i n g Y o u r L i f e B o o k 7 0 0 S e r i e s
L i f eB o ok 7 00 Se r ie s fr o m F uj i t su
19
ADJUSTING THE KEYBOARD ANGLE
On the bottom of your notebook,near the
back,are a pair of feet which flip down and
hold the back of the keyboard about 6° higher
than the front when resting on a flat surface.
They are designed to make it more comfortable
to use the keyboard with your notebook.The
feet must be folded flat against the bottom of
the notebook when opening or using the CDROM drive or it will not open or operate
properly. (Figure 1-10 on page 9)
C A U T I O N
When you are not using the adjustment
feet be sure that they are folded flat
against the bottom of the notebook.
They could be broken off or injure
someone if not used properly.
STATUS INDICATOR PANEL
The Status Indicator panel is located in the
recess just above the keyboard. (Figure 2-3.)
The appropriate indicators become visible as
you use your notebook.
Power Indicator
The Power indicator tells you when the system
is operational. It is on steady when there is
power to your notebook,and blinks when the
system is in Suspend mode. It goes off when the
system has entered Save-to-Disk mode,has
entered the Windows 95 pseudo-off state,or the
power is turned off from the power switch.
C A U T I O N
Do not operate your CD-ROM drive or
attempt to open the tray unless your
notebook is sitting on a flat surface and
the adjustment feet are folded against
the bottom of the notebook. Using a
CD-ROM drive when it is not level
may damage the drive or prevent
proper operation.
P O I N T
When your notebook has been shut
down from Windows 95, it is not the
same as turned off from the power
switch. It is in a pseudo-off state, with
all applications closed, but can be turned
on by pressing the Suspend/Resume
button. It is drawing some current in the
pseudo-off state.
C A U T I O N
Your notebook’s power switch must be
turned off to prevent all current draw.
S e c t i o n T w o
20
AC Adapter Indicator
The AC Adapter indicator tells you whether the
system is operating on an AC or auto/airline
adapter,or batteries alone. The indicator is On
when either of the adapters is active and Off
when power comes from the batteries alone. If a
battery is charging, the Power Adapter indicator
is active regardless of the setting of the power
switch. The ACAdapter indicator is also active
in the Windows 95 pseudo-off state,regardless
of the battery status. If there is no battery
charging, and the power switch is Off,then the
ACAdapter indicator and the Battery indicators
will all be Off.
Battery Indicators
The two sets of battery indicators show whether
or not the primary Lithium ion battery and/or
the optional second Lithium ion battery are
installed,and indicate the condition of each.
(Figure 2-3.) Battery 1 is the Lithium ion battery which is installed in Multi-function Bay 1
and Battery 2 is the Lithium ion battery which
is installed in Multi-function Bay 2. The battery
indicators are displayed only for a battery which
is installed.
Figure 2-3 Status Indicator Panel
Power Battery
Identifier
CD-ROM
Drive Access
Hard Drive AccessAC Adapter Battery
Level
PC Card Access
Floppy Disk
Drive Access
NumLk
CapsLock
Scr LkBattery
Charging
PC Card
Slot Identifier
Loading...