How it Works
Fujitsu
Loading...
560H SERIES
Specifications
21 pgs1.71 Mb0

Fujitsu 560H SERIES Specifications

Download
Page 1
1
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE)
560H SERIES
• The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International Association (PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). Incorrect insertion is prevented. Hot system plugging is possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which components can be mounted) and low-profile connectors are available.
• In addition to connectors for type I and type II cards, a connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided mounting are available.
■ PIN CONNECTOR (PLUG) CONTACT LENGTH
■ SPECIFICATIONS
Item Operating temperature range Current rating Voltage rating Contact resistance Insulation resistance Dielectric withstanding voltage Insertion/withdrawal life
Specification – 55°C to + 85°C DC 0.5 A AC 250 V 40 m Ω max (6 VDC, 0.1 A) 1000 M Ω min. (500 VDC) 500 VAC for 1 minute Industrial environment: 5,000 times Office environment: 10,000 times
Contact type Power, ground pins Card detection pins Other signal pins
Pin No.
1, 17, 34, 35, 51, 68
36, 67
Others
Contact length
5.0 mm (0.196 in.)
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
■ MATERIALS
Plug body: PPS resin UL94V-0 : 6T nylon (for type III card connector) UL94V-0 Ejector: Polyester :
PPS resin
(for SMT and type III card connectors)
Copper alloy Contact: Gold over palladium over nickel
(PAGOS) Terminal: Palladium
Specification
Item
Insulating material
Conductor
Plating
Page 2
560H Series Connector Conforming to Ver. 4
2
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
■ ORDERING PART NUMBER [PLUG]
V4: Conforms to Ver.4 E4: Conforms to Ver.4 and anti-ESD
Specification
Plating G: Gold plating
Number of contacts: 68, 136
Body P: Plug
Pin type 4: Straight
5: Right-angle 8: SMT
560 series connector
Fujitsu connector
FCN-56 5 P 068-G / XC-V4
■ ORDERING PART NUMBER [SOCKET]
FCN-56 8 J 068-G / 0
Terminal type 0: PC board double-sided straddle type B:
PC board single-sided mounting type
Plating G: Gold plating
Number of contacts: 68
Body J: Socket
Pin type 8: SMT
560 series connector
Fujitsu connector
Page 3
560H Series Connector Conforming to Ver. 4
3
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE
((
((
(WITH NO EJECTOR, LOW-PROFILE TYPE
))
))
)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/C-V4
3
(0.118)
4
(0.157)
1.51 (0.059)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
50.8 (2)
1.27 (0.05) × (34-1) = 41.91 (1.65)
1.27 (0.05)
3
(0.118)
42 (1.65)
12.2 (0.48)
58.7 (2.31)
24.9 (0.98)
1.27 (0.05)
1.27 (0.05)
1.27 (0.05) × (34-1) = 41.91 (1.65)
No.1
No.35 No.68
No.34
2- ø 2.8 (0.11)
2.5mm (0.098) deep spot facing
3.6 (0.141)
Part number: FCN-565P068-G/01-V4
•
Models with a board lock (metal fitting for direct mounting) are also available.
Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)
FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board)
• Long-terminal models are also available. Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.)) FCN-565P068-G/02-V4 (10 mm (0.394 in.))
• Models which support Type III are also available. Part number: FCN-565P068-G/17-V4 FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board )
Unit: mm (in.)
50.8 (2)
0.51 (0.02)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
7 (0.276)
3 (0.118)
11.2 (0.44)
5 (0.197)
1 (0.039)
4.25 (0.167)
3.5 (0.138)
2- ø 2.8 (0.110)
41.91 (1.65)
1.27 (0.05)
59.7(2.35)
2.42 (0.095)
35.2 (1.39)
2.5mm (0.098) deep spot facing
41.91 (1.65)
1.27 (0.05) No.17
No.51
No.34
No.68
No.35
No.1
1.27 (0.05)
4 (0.157)
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1 No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
50.8 (2)
±0.1 (0.0039)
41.91(1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1 No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm. In order to avoid damage to the connector, do not pull out the card at an angle.
Page 4
560H Series Connector Conforming to Ver. 4
4
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
0.51 (0.059)
3 (0.118)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
6 (0.236)
8 (0.315)
7 (0.276)
4.5 (0.177)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
2- ø 2.2 (0.0866)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05) No.1 No.17
No.35 No.51
No.34
No.68
1.27 (0.05)
53.7 (2.114)
8.5
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/F-V4
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD) Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)
7 (0.276)
2.5 (0.098)
1 (0.039)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
0.51 (0.059)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
1.27 (0.05)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
(2) M2.5 (0.098 in.) thread nut
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
No.68 No.51
No.35
No.1No.17No.34
4(0.157)
Unit: mm (in.)
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)
50.8 (2)
±0.05 (0.0039)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34
No.68
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.35
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
2- ø 2.8 (0.110)
±0.1 (0.0039)
<To be mounted on back of PC board>
No.1
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1 No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
Page 5
560H Series Connector Conforming to Ver. 4
5
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/A-V4
3 (0.118)
4.5 (0.177)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
6 (0.236)
11.2 (0.441)
50.8 (2)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05)
59.7 (2.35)
2.42 (0.095)
35.2 (1.39)
2- ø 2.8 (0.110)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
3 (0.118)
No.1 No.17 No.34
No.68No.51No.35
2.5mm (0.098) deep spot facing
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
1.27 (0.05)
50.8 (2)
±0.1 (0.0039)
±0.05 (0.0020)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
±0.1 (0.0039)
No.35
No.1
No.68
No.34
6.7 (0.264)
±0
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P136-G/0-V4
7
(0.276)7(0.276)
1.905 (0.075)
1.905 (0.075) × (8-1) = 13.335 (0.525)
35.2 (1.39)
11.2 (0.441)
2.42 (0.095)
59.7 (2.35)
50.8 (2)
11 (0.433)
3
(0.118)
4 (0.157)
No.35
No.1
No.35
No.1
No.34 No.68
No.34 No.68
1.905 (0.075)
±0.05 (0.0020)
No.35
No.1
1.905 (0.075) × (8-1)
= 13.335 (0.525)
No.1
No.35
±0.1 (0.0039)
50.8 (2)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34 No.68
No.34 No.68
±0.05 (0.0020)
2- ø 2.8 (0.110)
±0.1 (0.0039)
136- ø 1 (0.039)
±0.05 (0.0020)
Page 6
560H Series Connector Conforming to Ver. 4
6
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/C34-V4
*A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.1
No.35
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
No.34
2- ø 2.8 (0.110)
±0.1 (0.0039)
±0.05 (0.0020)
68- ø 1 (0.039)
0.51 (0.02)
3 (0.118)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
7
(0.276)
59.7 (2.35)
50.8 (2)
2- ø 2.8 (0.110)
2.42 (0.095)
35.2 (1.386)
11.2 (0.441)
No.1
No.35
No.34
No.68
7 (0.276)
4 (0.157)
59 (2.32)
2.5mm (0.098) deep spot facing
83.38 (3.283)*A
Page 7
560H Series Connector Conforming to Ver. 4
7
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black) Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black) Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige)
7 (0.276)
3 (0.118)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
35.2 (1.386)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5 (0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394)
78.5 (3.091) 59 (2.323)
42 (1.654)
35.5 (1.398)
7 (0.276)
11 (0.433)
4.8 (0.189)
2.1 (0.083)
4 (0.157)
No.1 No.17
No.35 No.51 No.68
No.18 No.34
No.52
ø 2.8 (0.110)
2- ø 2.8 (0.110)
2.5mm (0.098) deep spot facing
5 (0.197)
A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4, instead of FCN-565P068-G/XC-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1 No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
(Card insertion side)
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
68- ø 1 (0.039)
Unit: mm (in.)
Unit: mm (in.)
Page 8
560H Series Connector Conforming to Ver. 4
8
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/MC-V4 (Button color: Black) Part number: FCN-565P068-G/C22-V4 (Button color: Beige)
Unit: mm (in.)
7 (0.276)
3 (0.118)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
35.2 (1.386)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5 (0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394)
78.5 (3.091) 59 (2.323)
42 (1.654)
35.5 (1.398)
7 (0.276)
11 (0.433)
4.8 (0.189)
2.1 (0.083)
4 (0.157)
No.1 No.17
No.35 No.51 No.68
No.18 No.34
No.52
2- ø 2.8 (0.110)
2.5mm (0.098) deep spot facing
5 (0.197)
ø 2.8 (0.110)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4.
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
(Card insertion side)
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
Unit: mm (in.)
Page 9
560H Series Connector Conforming to Ver. 4
9
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Unit: mm (in.)
Part number: FCN-565P068-G/XF-V4 (Button color: Black) Part number: FCN-565P068-G/PF-V4 (Button color: Beige)
2.5
7 (0.276)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
35.2 (1.386)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5 (0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394)
78.5 (3.091)
4.8 (0.189)
42 (1.654)
35.5 (1.398)
7 (0.276)
1 (0.039)
2.5mm (0.098) deep spot facing
59 (2.323)
2.1 (0.083)
4 (0.157)
No.68 No.35
No.1No.34
ø 2.8 (0.110)
When a card is ejected
When a card is inserted
5 (0.197)
Unit: mm (in.)
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■ MOUNTING EXAMPLE
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34
No.1
No.68
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
68- ø 1 (0.039)
±0.05 (0.0020)
Ejector button
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
No.35
Regardless of how the connector is mounted on the PC board, a card can be inserted with its face upward.
Nut buried
Page 10
560H Series Connector Conforming to Ver. 4
10
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/W-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
The connector is mounted on a PC board so that only its terminal connection part rests on the board.
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
1.27 (0.05)
50.8 (2)
±0.1(0.0039)
±0.05 (0.0020)
41.91 (1.65)
±0.1 (0.0039)
No.1
No.68
6.7
+0
No.2
No.3
(Card insertion side)
2- ø 2.8 (0.110)
68- ø 1 (0.039)
±0.1(0.0039)
±0.05 (0.0020)
■ MOUNTING EXAMPLE
M2.5 screw
Nut
Mounting height
4.5mm(0.177in.)
Nut
Unit: mm (in.)
Unit: mm (in.)
Unit: mm (in.)
3 (0.118)
6 (0.236)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
4.5 (0.177)
2.5 (0.098)
2.1 (0.083)
5 (0.197)
3 (0.118)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
ø 2.8
3.5 (0.138)
35.2 (1.386)
R 1.4
2- ø 2.8 (0.110)
83.38 (3.283)
3.7 (0.146)
10 (0.394)
When a card is ejected
When a card is inserted
11 (0.433)
78.5 (3.091)
42 (1.654)
35.5 (1.398)
7 (0.276)
2.1 (0.083)
No.68
No.35
No.1 No.34No.17
No.51
2.5 (0.098)
5 (0.197)
4.25 (0.167)
Page 11
560H Series Connector Conforming to Ver. 4
11
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM (0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J25-V4 (supports type I, II card) Part number: FCN-565P068-G/J25-4V (supports type I, II, III card)
3(0.118)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
8
(0.315)
4.5 (0.177)
9 (0.354)
4.8 (0.189)
8 (0.315)
2.42
(0.095)
11.2 (0.441)
2- ø 2.2 (0.087)
76.48 (3.011)
81.88 (3.224)
59.7 (2.35)
50.8 (2)
0.2 (0.0078)35.2 (1.386)
4.25 (0.167)
3.5 (0.138)
5.2 (0.205)
10 (0.394)
When a card is inserted
12.5 (0.492)
42 (1.654)
35.5 (1.398)
4.5 (0.177)
59 (2.323)
No.68
No.35
No.1
No.34
11.5 (0.453)
7
(0.276)
50.8 (2)
8.5 (0.335)
8 (0.315)
ø 2.2 , 4.5 deep
When a card is ejected
5 (0.197)
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■ MOUNTING EXAMPLE
±0.1 (0.0039)
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
50.8 (2)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
No.1
No.34
No.35
No.68
3.42 (0.135)
–0
–0
+0
33.78 (1.330)
–0
76.48 (3.011)
±0.1
71.88 (2.830)
+0
82.88 (3.263)
–0
51.7 (2.035)
+0
61.7 (2.429)
–0
41.7 (1.642)
+0
50.8 (2)
±0.1 (0.0039)
61.7 (2.429)
–0
±0.1 (0.0039)
±0.05 (0.0020)
6.58 (0.259)
23.78 (0.936)
4 - ø 2.8 (0.110)
68- ø 1 (0.0394)
Unit: mm (in.)
Component mounting is prohibited in the hatched areas.
• Components with a height of 4.3 mm (0.169 in.) maximum can be installed under the connector.
• Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount
the connector to the board.
Unit: mm (in.)
Page 12
560H Series Connector Conforming to Ver. 4
12
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
Part number: FCN-565P068-G/0442-E4 (with FG clip)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/0426-V4 (with no FG clip)
5 (0.197)
0.51 (0.020)
2- ø 2.6
3 (0.118)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
6 (0.236)
11.2 (0.441)
35.2 (1.386)
2.42
(0.095)
76.31 (3.00)
79.3 (3.12)
86.31 (3.40)
4.8 (0.189)
7.8 (0.307)
1.2 (0.047)
8.5
(0.335)
2- ø 2.35 (0.0925)
2- ø 4 (0.157)
2- ø 6 (0.236)
59.7 (2.35)
50.8 (2)
2-R2.8
0.2 (0.008)
40 (1.57)
42.81 (1.69)
R4
12.9 10 (0.394)
71.85 (2.83) 59 (2.32)
42 (1.654)
35.5 (1.398)
34 (1.339)
57.51 (2.26)
22 (0.866)
No.35 No.68
No.1
No.34
9 (0.354)
5 (0.197)
12 (0.472)
71.85 (2.83)
59 (2.32)
42 (1.654)
35.5 (1.398)
34 (1.339)
22 (0.866)
No.35 No.68
No.1
No.34
9 (0.354)
5 (0.197)
12 (0.472)
2- ø 2.6
11.2 (0.441)
35.2 (1.386)
2.42 (0.095)
76.31 (3.00)
79.3 (3.12)
86.31 (3.40)
59.7 (2.35)
50.8 (2)
2-R2.8
0.2 (0.008)
40 (1.57)
42.81 (1.69)
0.77 (When a card is ejected)
8.07 (When a card is inserted)
R4
12.9 10 (0.394)
5 (0.197)
0.51 (0.020)
3 (0.118)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
6 (0.236)
4.8 (0.189)
1.2 (0.047)
8.5
(0.335)
2- ø 2.35 (0.0925)
2- ø 4 (0.157)
2- ø 6 (0.236)
0.77 (When a card is ejected)
8.07 (When a card is inserted)
Component mounting is prohibited in the hatched areas.
∗2.
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2–1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
61.7 (2.43)
–0
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.150)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
76.31 (3.0)
±0.1 (0.0039)
7.8 (0.307)
±0.1 (0.0039)
3.42 (0.135)
–0
6.58 (0.259)
–0
42.81 (1.69)
±0.1 (0.0039)
2- ø 4.5 (0.177)
+0.2 (0.0079)
–0
2- ø 8 (0.315)
–0
22 (0.866)
±0.1 (0.0039)
34 (1.339)
±0.1 (0.0039)
57.15 (2.25)
±0.1 (0.0039)
2- ø 2 (0.079)
±0.1 (0.0039)
5.715 (0.225)
±0.05 (0.0020
3.810 (0.150)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
2- ø 3.5 (0.138)
±0.1 (0.0039)
2- ø 3.5 (0.138)
±0.1 (0.0039)
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
61.7 (2.43)
–0
3.42 (0.135)
–0
6.58 (0.259)
–0
42.81 (1.69)
±0.1 (0.0039)
2- ø 4.5 (0.177)
+0.2 (0.0079)
–0
2- ø 8 (0.315)
–0
22 (0.866)
±0.1 (0.0039)
34 (1.339)
±0.1 (0.0039)
76.31 (3.0)
±0.1 (0.0039)
∗2.
∗2.
Component mounting is prohibited in the hatched areas.
∗2.
68- ø 1 (0.039)
±0.05 (0.0020)
68- ø 1 (0.039)
±0.05 (0.0020)
• Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount the connector to the board.
Unit: mm (in.)
Unit: mm (in.)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm (0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Page 13
560H Series Connector Conforming to Ver. 4
13
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.) RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J38-E4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
• Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu.
Unit: mm (in.)
Unit: mm (in.)
3 (0.118)
0.51 (0.020)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
SMT•FG Clip
4.8 (0.189)
8 (0.315)
10 (0.394)
28.5 (1.12)
83.38 (3.28)
8 (0.315)
11 (0.433)
2.42 (0.0953)
35.2 (1.385)
11.2 (0.441)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.34)
2- ø 2.2 (0.0866)
0.2 (0.0079)
40 (1.57)
R1.4
78.5 (3.09) 59 (2.32)
42 (1.65)
35.5 (1.40) No.1
No.35
11.5 (0.453)
28.45 (1.12)
No.68
2 (0.079)
8.5 (0.335)
No.34
1.8 (0.071)
4.5 (0.177)
ø 2.8 (0.110)
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.150)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.1
No.35
68- ø 1 (0.039)
±0.05 (0.0020)
No.34
No.68
4- ø 2.8 (0.110)
±0.1 (0.0039)
34 (1.34)
±0.05 (0.002)
29.45
±0.1 (0.0039)
67.31 (2.65)~68.0 (2.68)
3 (0.118)
±0.1 (0.0039)
4 (0.157)
±0.1 (0.0039)
28.5 (1.12)
40 (1.57)
±0.1 (0.0039)
Page 14
560H Series Connector Conforming to Ver. 4
14
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0221-E4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Unit: mm (in.)
83.38 (3.28)
40 (1.57)
35.2 (1.39)
11.2 (.441)
67.31 (2.65)
59.7 (2.35)
50.8 (2.00)
34 (1.34)
1 (.039)
40 (1.574)
1 (.039)
8 (.315)
11 (.433)
10 (.394)
φ 2.8 (.110)
φ 2.8 (.110)
R1.4
10.5 (.413)
5 (.197)
11
(.433)
1.8
(.071)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.398)
51.7 (2.04)
No. 68
No. 1
No. 34
No. 35
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
0.51(0.020)
7
7
3 (0.118)
4.8 (0.189)
(.276)
(.276)
40
±0.1
(1.57
±.002
)
9.5
-0 (.347-0)
4.4
-0 (.173-0)
6-0 (.236-0)5-0(.197-0)
51.7
+0
(2.035
+0
)
61.7
-0 (2.429-0)
75
-0 (2.95-0)
34
±0.05
(1.33
±0.002
)
67.31
+0.2
(2.65
+0.008
)
50.08
±0.1
(2.00
±0.004
)
1.27 x (68/2-1) = 41.91
±0.1
(1.65
±0.004
)
1.27
±0.05
(0.05
±0.002
)
1.905
±0.05
(.075
±0.002
)
3.810
±0.05
(.150
±0.002
)
5.715
±0.05
(.225
±0.002
)
68-φ 1
±0.05
(.039
±0.002
)
Note 2
Note 3
PCB Foot Print Viewed
from Connector Side
NOTE 2 COMPONENT CON NOT BE
MOUNTED IN THIS AREA
NOTE 3 COMPONENTS THAT HAVE
5mm HEIGHT CAN BE MOUNTED IN THIS AREA
NOTE 4 UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
Page 15
560H Series Connector Conforming to Ver. 4
15
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Unit: mm (in.)
83.38 (3.28)
40 (1.57)
35.2 (1.39)
11.2 (.441)
67.31 (2.65)
59.7 (2.35)
50.8 (2.00)
34 (1.34)
1 (.039)
40 (1.574)
1 (.039)
8 (.315)
11 (.433)
10 (.394)
φ 2.8 (.110)
φ 2.8 (.110)
10.5 (.413) 5 (.197)
11
(.433)
1.8
(.071)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.398)
51.7 (2.04)
No. 68
No. 1
No. 34
No. 35
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
0.51(0.020)
7
7
3 (0.118)
4.8 (0.189)
(.276)
(.276)
40
±0.1
(1.57
±.002
)
9.5
-0 (.347-0)
4.4
-0 (.173-0)
6-0 (.236-0)5-0(.197-0)
51.7
+0
(2.035
+0
)
61.7
-0 (2.429-0)
75
-0 (2.95-0)
34
±0.05
(1.33
±0.002
)
67.31
+0.2
(2.65
+0.008
)
50.08
±0.1
(2.00
±0.004
)
1.27 x (68/2-1) = 41.91
±0.1
(1.65
±0.004
)
1.27
±0.05
(0.05
±0.002
)
1.905
±0.05
(.075
±0.002
)
3.810
±0.05
(.150
±0.002
)
5.715
±0.05
(.225
±0.002
)
68-φ 1
±0.05
(.039
±0.002
)
Note 2
Note 3
PCB Foot Print Viewed
from Connector Side
NOTE 2 COMPONENT CON NOT BE
MOUNTED IN THIS AREA
NOTE 3 COMPONENTS THAT HAVE
5mm HEIGHT CAN BE MOUNTED IN THIS AREA
NOTE 4 UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
Part number: FCN-565P068-G/0231-E4
Page 16
560H Series Connector Conforming to Ver. 4
16
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE)
■ DIMENSIONS
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
7
(0.276)
7
(0.276)
1.905 (0.075)
1.905 (0.075) × (8-1) = 13.335 (0.525)
4.8 (0.189)
4.8 (0.189)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.34)
2.42 (0.0953)
40 (1.57)
1 (0.039)
35.2 (1.385)
11.2 (0.441)
8 (0.315)
83.38 (3.28)
10 (0.394)
11 (0.433)
3.7 (0.146) (When a card is ejected)
40 (1.57)
78.5 (3.09)
59 (2.32)
No.35
No.1
42 (1.65)
35.5 (1.40)
11 (0.433)
4 (0.157)
No.1
No.35
No.68
No.34
No.34
No.68
50.8 (2)
±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.1
No.35
No.1
No.35
1.905 (0.075)
±0.05 (0.0020)
1.905 (0.075) × (8-1) = 13.335 (0.525)
±0.05 (0.0020)
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
40 (1.575)
±0.1 (0.0039)
136- ø 1
±0.05
No.34 No.68
No.34 No.68
7
(0.276)
7
(0.276)
1.905 (0.075)
1.905 (0.075) × (8-1) = 13.335 (0.525)
4.8 (0.189)
4.8 (0.189)
34 (1.34)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
1 (0.039)
11.2 (0.441)
35.2 (1.385)
40 (1.57)
83.38 (3.28) 2.42 (0.0953)
3.7 (0.146)
11 (0,.433)
10
(0.394)
11 (0.433)
40 (1.57)
No. 1
No. 35
No. 1
No. 35
No. 68
No. 34
No. 34 No. 68
4 (0.157)
42 (1.654)
35.5 (1.398)
11
(0.433)
3 (0.118)
10
(0.394)
42 (1.654)
35.5 (1.398)
2.1 (0.083)
Connector with the left and right ejector buttons
Part Number: FCN-565P 136G/005-V4
Unit: mm (in.)
Unit: mm (in.)
Unit: mm (in.)
Part Number: FCN-565P136-G/Z-V4
Page 17
560H Series Connector Conforming to Ver. 4
17
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS
■ DIMENSIONS
Unit: mm (in.)
Unit: mm (in.)
8 (.315)
50.6 (1.99)
25 (.984)
7.22 (.284)
11 (.433)
10 (.394)
67.31 (2.650)
59.7 (2.35)
34 (1.34)
φ 2.8 (.110)
7 (.275)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.40)
2.1 (.083) 4 (.157)
4.8 (.189)
4 (.157)
8 (.315)
50.6 (1.99)
25 (.984)
7.22 (.284)
11 (.433)
10 (.394)
67.31 (2.650)
59.7 (2.35)
34 (1.34)
φ 2.8 (.110)
51 (2.01) min.
7 (.275)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.40)
2.1 (.083)
4 (.157)
4.8 (.189)
4 (.157)
Right Button FCN-560A08 FCN-560A14
Button
Color
BLACK
BEIGE
ESD
Left Button FCN-560A16 FCN-560A22
Button
Color
BLACK
BEIGE
ESD
Page 18
560H Series Connector Conforming to Ver. 4
18
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE
■ DIMENSIONS
Part number: FCN-564P068-G/A-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Unit: mm (in.)
1.27 (0.05)
7.63 (.300)
No.1
1.905 (0.075)
5.715 (0.225)
1.27 (0.05)
No.35
No.17
No.51
No.34
No.68
5.50 (.216)
10.80 (.425)
6.00 (.236)
2.40 (.0945)
44.80 (1.76)
51.80 (2.039)
7.00 (.276)
25.80 (1.016)
8.30 (.327)
3.00 (.118)
59.74 (2.35)
1.27 x (34-1) = 41.9 (1.65)
51.8 (2.039)
±0.1 (0.0039)
No.1
No.68
1.27 x (68/2-1) = 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
5.715 (0.225)
±0.05 (0.0020)
1.905 (0.118)
±0.05 (0.0020)
68- Ø 1 (0.0394)
No. 35
Page 19
560H Series Connector Conforming to Ver. 4
19
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/0-V4
• A model with the feature of preventing mismated board mounting is available. Contact Fujitsu.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Unit: mm (in.)
66.04 (2.6)
±0.1 (0.0039)
No.2
No.1
No.68
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
5.715 (0.225)
±0.05 (0.0020)
1.905 (0.118)
±0.05 (0.0020)
68- Ø 1 (0.0394)
±0.05 (0.0020)
2- Ø 2.8 (0.110)
±0.1 (0.0039)
No.3
Ø 1.00 (0.0394) used for polarization post
±0.1 (0.0039)
41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
4 (0.157)
No.1
3 (0.118)
11.2 (0.441)
5.5 (0.217)
1.905 (0.075)
5.715 (0.225)
5 (0.197)
4.25 (0.167)
2- Ø 2.8
(0.110)
2.42 (0.095)
74 (2.91)
66.04 (2.6)
50.8 (2)
41.91 (1.65)
1.27 (0.05)
35.2 (1.390)
59.7 (2.35)
7 (0.394)
3.5 (0.138)
No.35
No.17
No.51
No.34
No.68
6 (0.236)
2- Ø 2.8 (0.110)
1 (0.039)
Polarization Post
Page 20
560H Series Connector Conforming to Ver. 4
20
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/X0-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
74 (2.91)
67.31 (2.65)
66.04 (2.6)
34 (1.34)
50.8 (2)
1.27 (0.05)
41.91 (1.65)
35.2 (1.39)
83.38 (3.28) 2.42 (0.095)
1.905 (0.075)
5.715 (0.225)
4 (0.157)
3 (0.118)
4.8 (0.177)
78.5 (3.09)
2.1 (0.083)
42 (1.653)
35.5 (1,40)
No.1
No.35
No.17
No.51
No.34
No.68
7 (0.276)
10 (0.394)
3.7 (0.146)
(When a cardis ejected)
11 (0.433)
(When a cardis inserted)
40 (1.57)
36 (1.42)
8 (0.315)
2 – Ø 2.8 (0.110)
R1.4
Ø 2.8 (0.110)
5 (0.197)
3.5 (0.138)
4.25 (0.167)
66.04 (2.6)
±0.1 (0.0039)
No.2
No.1
No.68
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
5.715 (0.225)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
68- Ø 1 (0.0394)
±0.05 (0.0020)
2- Ø 2.8 (0.110)
±0.1 (0.0039)
No.3
Unit: mm (in.)
Unit: mm (in.)
Page 21
560H Series Connector Conforming to Ver. 4
21
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications subject to change
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the prop­erty of their respective owners. Fujitsu Components America, Inc. or its af filiates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.
Japan
Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141-0022, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components
Europe
Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components
Asia Pacific
Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com
Fujitsu Components International Headquarter Offices
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use