How it Works
Fujitsu
Loading...
560H
User Manual
21 pgs1.65 Mb0

Fujitsu 560H User Manual

Download
Page 1
MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE)
560H SERIES
■ FEATURES
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). Incorrect insertion is prevented. Hot system plugging is possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which components can be mounted) and low-profile connectors are available.
• In addition to connectors for type I and type II cards, a connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided mounting are available.
■ SPECIFICATIONS
Item Operating temperature range Current rating Voltage rating Contact resistance Insulation resistance Dielectric withstanding voltage Insertion/withdrawal life
Specification – 55°C to + 85°C DC 0.5 A AC 250 V 40 m Ω max (6 VDC, 0.1 A) 1000 M Ω min. (500 VDC) 500 VAC for 1 minute Industrial environment: 5,000 times Office environment: 10,000 times
■ PIN CONNECTOR (PLUG) CONTACT LENGTH
Contact type Power, ground pins Card detection pins Other signal pins
Pin No.
1, 17, 34, 35, 51, 68
36, 67
Others
Contact length
5.0 mm (0.196 in.)
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
■ MATERIALS
Item
Plug body: PPS resin UL94V-0
Insulating material
Conductor
Plating
: 6T nylon (for type III card connector) UL94V-0 Ejector: Polyester : Copper alloy
Contact: Gold over palladium over nickel (PAGOS) Terminal: Palladium
Specification
PPS resin
(for SMT and type III card connectors)
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
1
Page 2
560H Series Connector Conforming to Ver. 4
■ ORDERING PART NUMBER [PLUG]
FCN-56 5 P 068-G / XC-V4
V4: Conforms to Ver.4 E4: Conforms to Ver.4 and anti-ESD
Specification
Plating G: Gold plating
Number of contacts: 68, 136
Body P: Plug
Pin type 4: Straight
5: Right-angle 8: SMT
560 series connector
■ ORDERING PART NUMBER [SOCKET]
FCN-56 8 J 068-G / 0
Fujitsu connector
Terminal type 0: PC board double-sided straddle type B:
Plating G: Gold plating
Number of contacts: 68
Body J: Socket
Pin type 8: SMT
560 series connector
Fujitsu connector
PC board single-sided mounting type
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
2
Page 3
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/C-V4
3 (0.118)
2- ø 2.8 (0.110)
0.51 (0.02)
1 (0.039)
11.2 (0.44)
3.810 (0.15)
1.905 (0.075)
5.715 (0.225)
7 (0.276)
•
Models with a board lock (metal fitting for direct mounting) are also available.
5 (0.197)
1.27 (0.05)
4 (0.157)
3.5 (0.138)
4.25 (0.167)
No.1
No.35
1.27 (0.05)
• Long-terminal models are also available. Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.))
• Models which support Type III are also available. Part number: FCN-565P068-G/17-V4
41.91 (1.65)
59.7(2.35)
No.17
No.51
50.8 (2)
41.91 (1.65)
2.5mm (0.098)
1.27 (0.05)
deep spot facing
2.42 (0.095)
35.2 (1.39)
No.34
Unit: mm (in.)
No.68
No.1 No.2
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
1.27 (0.05)
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
(Card insertion side)
50.8 (2)
41.91 (1.65)
No.3
Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)
FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board) FCN-565P068-G/02-V4 (10 mm (0.394 in.)) FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm
(0.063 in.) thick PC board )
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
68- ø 1 (0.039)
2- ø 2.8 (0.110)
No.68
±0.05 (0.0020)
±0.1 (0.0039)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE
((
(WITH NO EJECTOR, LOW-PROFILE TYPE
((
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/01-V4
2- ø 2.8 (0.11)
4
42 (1.65)
3
(0.118)
1.27 (0.05)
1.27 (0.05) × (34-1) = 41.91 (1.65)
12.2 (0.48)
1.27 (0.05) × (34-1) = 41.91 (1.65)
3.810 (0.15)
1.905 (0.075)
5.715 (0.225)
3
(0.118)
1.51 (0.059)
(0.157)
3.6 (0.141)
Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm. In order to avoid damage to the connector, do not pull out the card at an angle.
50.8 (2)
1.27 (0.05)
58.7 (2.31)
1.27 (0.05)
No.1
No.35 No.68
No.34
2.5mm (0.098) deep spot facing
24.9 (0.98)
No.1 No.2
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
50.8 (2)
41.91(1.65)
1.27 (0.05) No.3
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
(Card insertion side)
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
No.68
68- ø 1 (0.039)
±0.05 (0.0020)
2- ø 2.8 (0.110)
Unit: mm (in.)
±0.1 (0.0039)
))
)
))
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
3
Page 4
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/F-V4
(2) M2.5 (0.098 in.) thread nut
0.51 (0.059)
3.810 (0.15)
1.905 (0.075)
5.715 (0.225)
7 (0.276)
2.5 (0.098)
1 (0.039)
59.7 (2.35)
50.8 (2)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
2.42 (0.095)
11.2 (0.441)
35.2 (1.385)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05) No.68 No.51
1.27 (0.05)
No.35
No.1No.17No.34
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4
<To be mounted on back of PC board>
No.68
4(0.157)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
50.8 (2)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
1.27 (0.05)
No.34
2- ø 2.8 (0.110)
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
(Card insertion side)
±0.05 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
±0.1 (0.0039)
Unit: mm (in.)
No.35
No.1
68- ø 1 (0.039)
±0.05 (0.0020)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD) Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)
2- ø 2.2 (0.0866)
0.51 (0.059)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
8 (0.315)
4.5 (0.177)
3 (0.118)
2.42 (0.095)
6 (0.236)
11.2 (0.441)
35.2 (1.385)
7 (0.276)
1.27 (0.05)
59.7 (2.35)
50.8 (2)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05) No.1 No.17
No.35 No.51
53.7 (2.114)
No.34
8.5
No.68
No.1 No.2
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
41.91 (1.65)
1.27 (0.05) No.3
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
(Card insertion side)
±0.1 (0.0039)
50.8 (2)
±0.1 (0.0039)
±0.05 (0.0020)
68- ø 1 (0.039)
2- ø 2.8 (0.110)
No.68
±0.05 (0.0020)
±0.1 (0.0039)
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Unit: mm (in.)
4
Page 5
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/A-V4
1.27 (0.05)
50.8 (2)
1.27 (0.05)
59.7 (2.35)
2.5mm (0.098) deep spot facing
2.42 (0.095)
No.68No.51No.35
35.2 (1.39)
No.1
No.35
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
50.8 (2)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
1.27 (0.05)
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
No.68
68- ø 1 (0.039)
2- ø 2.8 (0.110)
Unit: mm (in.)
±0
No.34
6.7 (0.264)
±0.05 (0.0020)
±0.1 (0.0039)
3 (0.118)
3.810 (0.15)
1.905 (0.075)
5.715 (0.225)
6 (0.236)
4.5 (0.177)
2- ø 2.8 (0.110)
11.2 (0.441)
1.27 (0.05)
3 (0.118)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05) × (34–1) = 41.91 (1.65)
No.1 No.17 No.34
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P136-G/0-V4
No.35
No.1
No.35
No.1
59.7 (2.35)
50.8 (2)
No.34 No.68
No.34 No.68
±0.05 (0.0020)
1.905 (0.075) × (8-1)
= 13.335 (0.525)
No.1
No.35
No.35
2- ø 2.8 (0.110)
1.905 (0.075)
50.8 (2)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
1.27 (0.05)
No.1
136- ø 1 (0.039)
±0.1 (0.0039)
±0.05 (0.0020)
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
±0.05 (0.0020)
No.34 No.68
No.34 No.68
7
(0.276)7(0.276)
1.905 (0.075) × (8-1) = 13.335 (0.525)
1.905 (0.075)
35.2 (1.39)
11 (0.433)
3
(0.118)
2.42 (0.095)
11.2 (0.441)
4 (0.157)
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Unit: mm (in.)
5
Page 6
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/C34-V4
3 (0.118)
0.51 (0.02)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
7
(0.276)
2- ø 2.8 (0.110)
2.42 (0.095)
11.2 (0.441)
35.2 (1.386)
83.38 (3.283)*A
59.7 (2.35)
50.8 (2)
2.5mm (0.098) deep spot facing
59 (2.32)
4 (0.157)
7 (0.276)
No.1
No.35
No.34
No.68
*A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1 (0.0039)
50.8 (2)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
No.1
No.35
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
1.27 (0.05)
±0.1 (0.0039)
±0.05 (0.0020)
No.34
2- ø 2.8 (0.110)
68- ø 1 (0.039)
No.68
Unit: mm (in.)
±0.1 (0.0039)
±0.05 (0.0020)
Unit: mm (in.)
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
6
Page 7
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black) Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black) Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige)
3 (0.118)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
7 (0.276)
0.51 (0.020)
2- ø 2.8 (0.110)
2.42 (0.095)
83.38 (3.283)
4.8 (0.189)
2.1 (0.083)
35.2 (1.386)
11.2 (0.441)
8 (0.315)
ø 2.8 (0.110)
4 (0.157)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
5 (0.197)
78.5 (3.091) 59 (2.323)
No.1 No.17
3.5 (0.138)
4.25 (0.167)
R 1.4
42 (1.654)
35.5 (1.398)
No.18 No.34
2.5mm (0.098) deep spot facing
36 (1.417)
10 (0.394)
40 (1.574)
3.7 (0.146)
11 (0.433)
No.35 No.51 No.68
No.52
7 (0.276)
Unit: mm (in.)
A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4, instead of FCN-565P068-G/XC-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1 (0.0039)
50.8 (2)
41.91 (1.65)
1.27 (0.05) No.3
±0.1 (0.0039)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
±0.1 (0.0039)
±0.05 (0.0020)
No.68
(Card insertion side)
2- ø 2.8 (0.110)
68- ø 1 (0.039)
±0.05 (0.0020)
±0.1 (0.0039)
±0.1 (0.0039)
40 (1.574)
Unit: mm (in.)
Specifications subject to change
No.1 No.2
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
3.810 (0.15)
4- ø 2.8 (0.110)
1.905 (0.075)
5.715 (0.225)
34 (1.339)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
7
Page 8
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/MC-V4 (Button color: Black) Part number: FCN-565P068-G/C22-V4 (Button color: Beige)
3 (0.118)
3.810 (0.15)
1.905 (0.075)
5.715 (0.225)
7 (0.276)
0.51 (0.020)
2- ø 2.8 (0.110)
2.42 (0.095)
35.2 (1.386)
11.2 (0.441)
83.38 (3.283) ø 2.8 (0.110)
34 (1.339)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
5 (0.197)
4.25 (0.167)
3.5
R 1.4
(0.138)
2.5mm (0.098) deep spot facing
36 (1.417)
40 (1.574)
8 (0.315)
3.7 (0.146)
11 (0.433)
4.8 (0.189) 10 (0.394)
78.5 (3.091) 59 (2.323)
42 (1.654)
35.5 (1.398) No.1 No.17
No.18 No.34
2.1 (0.083)
4 (0.157)
Unit: mm (in.)
7 (0.276)
No.35 No.51 No.68
No.52
Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1 (0.0039)
No.1
No.2
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
3.810 (0.15)
5.715 (0.225)
1.905 (0.075)
4- ø 2.8 (0.110)
34 (1.339)
50.8 (2)
41.91 (1.65)
1.27 (0.05) No.3
±0.1 (0.0039)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
±0.1 (0.0039)
±0.05 (0.0020)
No.68
(Card insertion side)
2- ø 2.8 (0.110)
68- ø 1 (0.039)
±0.05 (0.0020)
±0.1 (0.0039)
±0.1 (0.0039)
40 (1.574)
Unit: mm (in.)
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
8
Page 9
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XF-V4 (Button color: Black) Part number: FCN-565P068-G/PF-V4 (Button color: Beige)
34 (1.339)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
2.5mm (0.098) deep spot facing
7 (0.276)
2.5
2.42 (0.095)
1 (0.039)
83.38 (3.283)
4.8 (0.189)
2.1 (0.083)
35.2 (1.386)
11.2 (0.441)
8 (0.315)
ø 2.8 (0.110)
4 (0.157)
5 (0.197)
78.5 (3.091) 59 (2.323)
No.68 No.35
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
3.5
4.25 (0.167)
R 1.4
35.5 (1.398)
(0.138)
42 (1.654)
10 (0.394)
No.1No.34
36 (1.417)
40 (1.574)
When a card is inserted
3.7 (0.146)
When a card is ejected
7 (0.276)
■ MOUNTING EXAMPLE
Unit: mm (in.)
No.68
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
3.810 (0.15)
1.905 (0.075)
5.715 (0.225)
4- ø 2.8 (0.110)
34 (1.339)
Unit: mm (in.)
Specifications subject to change
±0.1 (0.0039)
50.8 (2)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
1.27 (0.05)
±0.05 (0.0020)
No.34
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
±0.1 (0.0039)
±0.05 (0.0020)
No.35
No.1
Ejector button
Nut buried
±0.1 (0.0039)
40 (1.574)
Regardless of how the connector is mounted on the PC board, a card can be inserted with its face upward.
9
Page 10
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/W-V4
3 (0.118)
4.5 (0.177)
2.42 (0.095)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
6 (0.236)
2.5 (0.098)
5 (0.197)
2.1 (0.083)
3 (0.118)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
ø 2.8
3.7 (0.146)
When a card is ejected
When a card is inserted
11 (0.433)
7 (0.276)
10 (0.394)
42 (1.654)
35.5 (1.398)
No.35
67.31 (2.65)
59.7 (2.35)
34 (1.339)
5 (0.197)
78.5 (3.091)
No.1 No.34No.17
No.51
50.8 (2)
4.25 (0.167)
3.5
R 1.4
(0.138)
No.68
2- ø 2.8 (0.110)
35.2 (1.386)
2.1 (0.083)
Unit: mm (in.)
2.5 (0.098)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1(0.0039)
50.8 (2)
41.91 (1.65)
1.27 (0.05) No.3
±0.1 (0.0039)
±0.05 (0.0020)
No.68
+0
6.7
2- ø 2.8 (0.110)
68- ø 1 (0.039)
±0.1(0.0039)
±0.05 (0.0020)
5.715 (0.225)
3.810 (0.15)
1.905 (0.075)
±0.05 (0.0020)
±0.05 (0.0020)
No.1 No.2
±0.05 (0.0020)
(Card insertion side)
■ MOUNTING EXAMPLE
Nut
Mounting height
4.5mm(0.177in.)
Nut
M2.5 screw
The connector is mounted on a PC board so that only its terminal connection part rests on the board.
Unit: mm (in.)
Unit: mm (in.)
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
10
Page 11
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM (0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J25-V4 (supports type I, II card) Part number: FCN-565P068-G/J25-4V (supports type I, II, III card)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
8
4.5 (0.177)
9 (0.354)
3(0.118)
0.51 (0.020)
(0.315)
ø 2.2 , 4.5 deep
8 (0.315)
76.48 (3.011)
4.8 (0.189)
2- ø 2.2 (0.087)
2.42
(0.095)
11.2 (0.441)
81.88 (3.224)
7
(0.276)
11.5 (0.453)
4.5 (0.177)
No.1
No.35
59.7 (2.35)
50.8 (2)
5 (0.197)
4.25 (0.167)
59 (2.323)
50.8 (2)
3.5 (0.138)
42 (1.654)
35.5 (1.398) No.34
No.68
0.2 (0.0078)35.2 (1.386)
10 (0.394)
8 (0.315)
When a card is ejected
When a card is inserted
5.2 (0.205)
12.5 (0.492)
8.5 (0.335)
Unit: mm (in.)
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1 (0.0039)
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
3.810 (0.15)
5.715 (0.225)
No.1
No.35
1.905 (0.075)
50.8 (2)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
±0.05 (0.0020)
1.27 (0.05)
68- ø 1 (0.0394)
4 - ø 2.8 (0.110)
51.7 (2.035)
61.7 (2.429)
41.7 (1.642)
±0.1 (0.0039)
50.8 (2)
61.7 (2.429)
±0.1 (0.0039)
±0.1 (0.0039)
+0
–0
+0
–0
No.68
±0.05 (0.0020)
–0
No.34
3.42 (0.135)
–0
6.58 (0.259)
Unit: mm (in.)
+0
–0
23.78 (0.936)
33.78 (1.330)
±0.1
+0
–0
76.48 (3.011)
71.88 (2.830)
82.88 (3.263)
■ MOUNTING EXAMPLE
• Components with a height of 4.3 mm (0.169 in.) maximum can be installed under the connector.
• Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount
the connector to the board.
Component mounting is prohibited in the hatched areas.
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
11
Page 12
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm (0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/0442-E4 (with FG clip)
2-R2.8
3 (0.118)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
2- ø 4 (0.157)
2- ø 6 (0.236)
2- ø 2.35 (0.0925)
1.2 (0.047)
5 (0.197)
0.51 (0.020)
8.5
(0.335)
6 (0.236)
7.8 (0.307)
4.8 (0.189)
2- ø 2.6
2.42
(0.095)
35.2 (1.386)
79.3 (3.12)
86.31 (3.40)
76.31 (3.00)
12 (0.472)
11.2 (0.441)
No.1
22 (0.866)
5 (0.197)
59.7 (2.35)
50.8 (2)
12.9
71.85 (2.83) 59 (2.32)
42 (1.654)
35.5 (1.398) No.34
No.35 No.68
34 (1.339)
57.51 (2.26)
0.2 (0.008)
40 (1.57)
R4
10 (0.394)
42.81 (1.69)
0.77 (When a card is ejected)
8.07 (When a card is inserted)
9 (0.354)
Part number: FCN-565P068-G/0426-V4 (with no FG clip)
2-R2.8
3 (0.118)
5 (0.197)
2- ø 2.6
59.7 (2.35)
50.8 (2)
R4
0.2 (0.008)
10 (0.394)
40 (1.57)
42.81 (1.69)
0.77 (When a card is ejected)
8.07 (When a card is inserted)
9 (0.354)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
2- ø 6 (0.236)
2- ø 4 (0.157)
2- ø 2.35 (0.0925)
1.2 (0.047)
0.51 (0.020)
8.5
(0.335)
2.42
6 (0.236)
86.31 (3.40)
79.3 (3.12)
4.8 (0.189)
(0.095)
11.2 (0.441)
35.2 (1.386)
76.31 (3.00)
12 (0.472)
12.9
71.85 (2.83)
59 (2.32)
42 (1.654)
No.1
No.35 No.68
22 (0.866)
35.5 (1.398)
No.34
34 (1.339)
5 (0.197)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
2- ø 3.5 (0.138)
1.27 (0.05) × (68/2–1) = 41.91 (1.65)
1.27 (0.05)
∗2.
±0.1 (0.0039)
2- ø 2 (0.079)
22 (0.866)
57.15 (2.25)
Component mounting is prohibited in the hatched areas.
±0.05 (0.0020)
±0.1 (0.0039)
5.715 (0.225)
76.31 (3.0)
±0.1 (0.0039)
7.8 (0.307)
±0.1 (0.0039)
±0.05 (0.0020)
±0.05 (0.0020)
3.810 (0.150)
1.905 (0.075)
∗2.
• Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount the connector to the board.
61.7 (2.43)
50.8 (2)
±0.05 (0.0020)
34 (1.339)
±0.1 (0.0039)
–0
±0.1 (0.0039)
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
68- ø 1 (0.039)
±0.1 (0.0039)
–0
3.42 (0.135)
–0
6.58 (0.259)
2- ø 4.5 (0.177)
2- ø 8 (0.315)
–0
–0
±0.1 (0.0039)
42.81 (1.69)
+0.2 (0.0079)
2- ø 3.5 (0.138)
±0.05 (0.0020)
±0.05 (0.0020
±0.1 (0.0039)
3.810 (0.150)
5.715 (0.225)
76.31 (3.0)
∗2.
–0
61.7 (2.43)
±0.1 (0.0039)
50.8 (2)
±0.1 (0.0039)
±0.05 (0.0020)
1.905 (0.075)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
1.27 (0.05)
∗2.
22 (0.866)
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
34 (1.339)
±0.05 (0.0020)
68- ø 1 (0.039)
±0.1 (0.0039)
Component mounting is prohibited in the hatched areas.
–0
3.42 (0.135)
–0
±0.1 (0.0039)
6.58 (0.259)
42.81 (1.69)
2- ø 4.5 (0.177)
2- ø 8 (0.315)
+0.2 (0.0079)
–0
–0
Unit: mm (in.)
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
12
Page 13
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.) RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J38-E4
3 (0.118)
0.51 (0.020)
3.810 (0.150)
1.905 (0.075)
5.715 (0.225)
SMT•FG Clip
4.8 (0.189)
8 (0.315)
2- ø 2.2 (0.0866)
2.42 (0.0953)
35.2 (1.385)
83.38 (3.28)
8 (0.315)
28.5 (1.12)
ø 2.8 (0.110)
11 (0.433)
10 (0.394)
11.2 (0.441)
34 (1.34)
42 (1.65)
35.5 (1.40) No.1
67.31 (2.65)
59.7 (2.35)
50.8 (2)
78.5 (3.09) 59 (2.32)
R1.4
No.34
0.2 (0.0079)
40 (1.57)
1.8 (0.071)
8.5 (0.335)
4.5 (0.177)
11.5 (0.453)
No.35
28.45 (1.12)
No.68
2 (0.079)
Unit: mm (in.)
• Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1 (0.0039)
50.8 (2)
No.1
±0.05 (0.0020)
±0.05 (0.0020)
±0.05 (0.0020)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)
1.27 (0.05)
No.35
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.05 (0.002)
34 (1.34)
67.31 (2.65)~68.0 (2.68)
±0.1 (0.0039)
±0.05 (0.0020)
29.45
No.34
No.68
±0.05 (0.0020)
68- ø 1 (0.039)
±0.1 (0.0039)
3 (0.118)
±0.1 (0.0039)
±0.1 (0.0039)
40 (1.57)
28.5 (1.12)
4 (0.157)
±0.1 (0.0039)
Unit: mm (in.)
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
13
Page 14
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0221-E4
φ 2.8 (.110)
34 (1.34)
59.7 (2.35)
50.8 (2.00)
67.31 (2.65)
1 (.039)
7
7
3 (0.118)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
(.276)
(.276)
40 (1.57)
35.2 (1.39)
11.2 (.441)
40 (1.574)
0.51(0.020)
1 (.039)
83.38 (3.28)
φ 2.8 (.110)
8 (.315)
R1.4
10 (.394)
11 (.433)
4.8 (0.189)
1.8
(.071)
59 (2.32)
78.5 (3.09)
42 (1.65)
(.433)
No. 34
No. 1
35.5 (1.398)
10.5 (.413)
11
No. 68
51.7 (2.04)
No. 35
5 (.197)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1
±.002
(1.57
)
6-0 (.236-0)5-0(.197-0)
-0 (.347-0)
9.5
)
+0
(2.035
-0 (2.429-0)
-0 (2.95-0)
+0
75
61.7
51.7
68-φ 1
±0.05
(.039
±0.002
)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
)
±0.002
(1.33
±0.05
34
Note 3
)
+0.008
(2.65
+0.2
67.31
Note 2
PCB Foot Print Viewed
from Connector Side
NOTE 2 COMPONENT CON NOT BE
NOTE 3 COMPONENTS THAT HAVE
NOTE 4 UNLESS OTHERWISE SPECIFIED
MOUNTED IN THIS AREA
5mm HEIGHT CAN BE MOUNTED IN THIS AREA
TOLERANCES ARE ±0.5mm (0.002 in.)
4.4
-0 (.173-0)
)
±0.004
(1.65
±0.1
)
±0.002
±0.004
(2.00
±0.1
±0.05
50.08
1.27 x (68/2-1) = 41.91
±0.05
±0.05
±0.05
(.075
(.150
(.225
±0.002
±0.002
±0.002
1.905
3.810
5.715
Specifications subject to change
40
)
(0.05
1.27
)
)
)
Unit: mm (in.)
14
Page 15
560H Series Connector Conforming to Ver. 4
10.5 (.413) 5 (.197)
11
(.433)
1.8
(.071)
78.5 (3.09)
59 (2.32)
42 (1.65)
35.5 (1.398)
51.7 (2.04)
No. 68
No. 1
No. 34
No. 35
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0231-E4
1 (.039)
59.7 (2.35)
50.8 (2.00)
67.31 (2.65)
34 (1.34)
φ 2.8 (.110)
3 (0.118)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
1 (.039)
8 (.315)
11 (.433)
40 (1.574)
10 (.394)
11.2 (.441)
35.2 (1.39)
φ 2.8 (.110)
40 (1.57)
83.38 (3.28)
4.8 (0.189)
7
(.276)
7
(.276)
0.51(0.020)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1
±.002
40
(1.57
)
6-0 (.236-0)5-0(.197-0)
4.4
Specifications subject to change
1.905
3.810
5.715
-0 (.173-0)
)
±0.004
(1.65
±0.1
)
)
±0.002
±0.004
(0.05
(2.00
±0.1
±0.05
1.27
50.08
1.27 x (68/2-1) = 41.91
±0.05
±0.002
(.075
(.150
(.225
)
±0.002
±0.002
±0.05
±0.05
)
)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
9.5
-0 (.347-0)
)
+0
(2.035
-0 (2.429-0)
+0
61.7
51.7
68-φ 1
-0 (2.95-0)
75
±0.05
(.039
±0.002
Note 3
)
+0.008
PCB Foot Print Viewed
from Connector Side
NOTE 2 COMPONENT CON NOT BE
NOTE 3 COMPONENTS THAT HAVE
NOTE 4 UNLESS OTHERWISE SPECIFIED
)
±0.002
(1.33
±0.05
34
(2.65
+0.2
67.31
Note 2
)
MOUNTED IN THIS AREA
5mm HEIGHT CAN BE MOUNTED IN THIS AREA
TOLERANCES ARE ±0.5mm (0.002 in.)
Unit: mm (in.)
15
Page 16
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE)
■ DIMENSIONS
Part Number: FCN-565P136-G/Z-V4
7
(0.276)
(0.276)
1.905 (0.075) × (8-1) = 13.335 (0.525)
1.905 (0.075)
7
4.8 (0.189)
4.8 (0.189)
1 (0.039)
2.42 (0.0953)
40 (1.57)
35.2 (1.385)
83.38 (3.28)
8 (0.315)
11.2 (0.441)
4 (0.157)
34 (1.34)
No.1
No.35
No.35
No.1
67.31 (2.65)
59.7 (2.35)
50.8 (2)
78.5 (3.09)
59 (2.32)
10 (0.394)
42 (1.65)
35.5 (1.40)
No.68
No.34
Unit: mm (in.)
40 (1.57)
Connector with the left and right ejector buttons
Part Number: FCN-565P 136G/005-V4
7
(0.276)
3.7 (0.146) (When a card is ejected)
1.905 (0.075) × (8-1) = 13.335 (0.525)
11 (0.433)
No.34
No.68
11 (0.433)
1.905 (0.075)
(0.276)
7
4.8 (0.189)
4.8 (0.189)
40 (1.57)
83.38 (3.28) 2.42 (0.0953)
3.7 (0.146)
11 (0,.433)
1 (0.039)
11.2 (0.441)
35.2 (1.385)
10
(0.394)
4 (0.157)
35.5 (1.398)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.34)
42 (1.654)
42 (1.654)
35.5 (1.398)
No. 1
No. 35
No. 1
No. 68
No. 35
No. 34
Unit: mm (in.)
(0.394)
40 (1.57)
11 (0.433)
10
No. 34 No. 68
11
(0.433)
2.1 (0.083)
3 (0.118)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1 (0.0039)
50.8 (2)
Specifications subject to change
1.27 (0.05) × (68/2-1)
No.1
No.35
±0.05 (0.0020)
= 41.91 (1.65)
1.27 (0.05)
No.1
±0.05 (0.0020)
No.35
1.905 (0.075)
±0.05 (0.0020)
1.905 (0.075) × (8-1) = 13.335 (0.525)
34 (1.339)
67.31 (2.65)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
±0.1 (0.0039)
±0.05 (0.0020)
4- ø 2.8 (0.110)
±0.1 (0.0039)
±0.05
136- ø 1
No.34 No.68
No.34 No.68
±0.1 (0.0039)
±0.1 (0.0039)
40 (1.575)
Unit: mm (in.)
16
Page 17
560H Series Connector Conforming to Ver. 4
FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS
■ DIMENSIONS
59.7 (2.35)
67.31 (2.650)
34 (1.34)
4 (.157)
25 (.984)
7.22 (.284)
φ 2.8 (.110)
50.6 (1.99)
8 (.315)
11 (.433)
4.8 (.189)
10 (.394)
7 (.275)
42 (1.65)
59 (2.32)
78.5 (3.09)
2.1 (.083)
35.5 (1.40)
Right Button FCN-560A08 FCN-560A14
4 (.157)
Button
Color
BLACK
BEIGE
Unit: mm (in.)
ESD
34 (1.34)
59.7 (2.35)
67.31 (2.650)
4 (.157)
φ 2.8 (.110)
7.22 (.284) 25 (.984)
8 (.315)
50.6 (1.99) 11 (.433)
51 (2.01) min.
78.5 (3.09)
10 (.394)
4.8 (.189)
2.1 (.083)
59 (2.32)
42 (1.65)
7 (.275)
35.5 (1.40)
4 (.157)
Left Button FCN-560A16 FCN-560A22
Button
Color
BLACK
BEIGE
Unit: mm (in.)
ESD
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
17
Page 18
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE
■ DIMENSIONS
Part number: FCN-564P068-G/A-V4
5.715 (0.225)
1.905 (0.075)
5.50 (.216)
1.27 (0.05)
7.63 (.300)
No.1
1.27 (0.05)
No.35
59.74 (2.35)
1.27 x (34-1) = 41.9 (1.65)
No.17
No.51
44.80 (1.76)
51.80 (2.039)
No.68
7.00 (.276)
No.34
3.00 (.118)
8.30 (.327)
6.00 (.236)
2.40 (.0945)
25.80 (1.016)
10.80 (.425)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Specifications subject to change
±0.1 (0.0039)
No.68
±0.1 (0.0039)
1.905 (0.118)
5.715 (0.225)
±0.05 (0.0020)
±0.05 (0.0020)
No.1
1.27 x (68/2-1) = 41.91 (1.65)
1.27 (0.05)
No. 35
±0.05 (0.0020)
68- Ø 1 (0.0394)
51.8 (2.039)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Unit: mm (in.)
18
Page 19
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/0-V4
Polarization Post
1.27 (0.05)
2.42 (0.095)
35.2 (1.390)
No.34
6 (0.236)
No.68
5.715 (0.225)
1.905 (0.075)
3 (0.118)
7 (0.394)
2- Ø 2.8 (0.110)
5.5 (0.217)
1 (0.039)
11.2 (0.441)
5 (0.197)
4.25 (0.167)
1.27 (0.05)
4 (0.157)
(0.110)
2- Ø 2.8
No.1
No.35
1.27 (0.05)
No.51
74 (2.91)
66.04 (2.6)
50.8 (2)
41.91 (1.65)
3.5 (0.138)
59.7 (2.35)
41.91 (1.65)
No.17
• A model with the feature of preventing mismated board mounting is available. Contact Fujitsu.
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
2- Ø 2.8 (0.110)
Ø 1.00 (0.0394) used for polarization post
68- Ø 1 (0.0394)
No.68
±0.1 (0.0039)
±0.05 (0.0020)
±0.1 (0.0039)
No.1
No.2
±0.05 (0.0020)
±0.05 (0.0020)
5.715 (0.225)
1.905 (0.118)
Specifications subject to change
66.04 (2.6)
41.91 (1.65)
1.27 (0.05)
No.3
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Unit: mm (in.)
19
Page 20
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/X0-V4
74 (2.91)
67.31 (2.65)
4 (0.157)
5.715 (0.225)
1.905 (0.075)
3 (0.118)
34 (1.34)
66.04 (2.6)
50.8 (2)
41.91 (1.65)
1.27 (0.05)
2 – Ø 2.8 (0.110)
4.8 (0.177)
35.2 (1.39)
83.38 (3.28) 2.42 (0.095)
Ø 2.8 (0.110)
2.1 (0.083)
No.1
No.35
No.17
No.51
5 (0.197)
78.5 (3.09)
3.5 (0.138)
4.25 (0.167)
R1.4
42 (1.653)
35.5 (1,40)
10 (0.394)
No.34
No.68
40 (1.57)
36 (1.42)
8 (0.315)
3.7 (0.146)
(When a cardis ejected)
11 (0.433)
(When a cardis inserted)
7 (0.276)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Specifications subject to change
±0.1 (0.0039)
No.1
No.2
±0.05 (0.0020)
±0.05 (0.0020)
5.715 (0.225)
1.905 (0.075)
66.04 (2.6)
41.91 (1.65)
1.27 (0.05) No.3
±0.05 (0.0020)
±0.1 (0.0039)
2- Ø 2.8 (0.110)
68- Ø 1 (0.0394)
No.68
±0.1 (0.0039)
±0.05 (0.0020)
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Unit: mm (in.)
20
Page 21
560H Series Connector Conforming to Ver. 4
Europe
Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components
Asia Pacific
Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141-0022, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the prop­erty of their respective owners. Fujitsu Components America, Inc. or its af filiates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.
Specifications subject to change
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
21
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use