BETRIEBSANLEITUNG
BETRIEBSANLEITUNG
BETRIEBSANLEITUNGBETRIEBSANLEITUNG
OPERATING MANUAL
OPERATING MANUAL
OPERATING MANUALOPERATING MANUAL
461V FA
461V FA
461V FA461V FA
LCD-Bildschirm / Moniteur / Monitor / Skärm / Beeldscherm
Sie haben ...
... technische Fragen oder Probleme?
Wenden Sie sich bitte an
unseren Help Desk (siehe Garantiekarte).
Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet:
http://www.fujitsu-siemens.com
Are there ...
... any technical problems or other
questions you need clarified?
Please contact
our Help Desk (see Guarantee Card).
The latest information on our products, tips, updates, etc., can be found on the Internet under:
http://www.fujitsu-siemens.com
Dieses Handbuch wurde auf Recycling-Papier gedruckt.
This manual has been printed on recycled paper.
Ce manuel est imprimé sur du papier recyclé.
Este manual ha sido impreso sobre papel reciclado.
Questo manuale è stato stampato su carta da riciclaggio.
Denna handbok är tryckt på recyclingpapper.
Dit handboek werd op recycling-papier gedrukt.
Herausgegeben von/Published by
Fujitsu Siemens Computers GmbH
A26361-K708-Z100-1-5E19
Bestell-Nr./Order No.:
Printed in Taiwan
AG 1200 12/00
A26361-K708-Z100-1-5E19
A26361-K708-Z100-1-5E19A26361-K708-Z100-1-5E19
A26361-K708-Z100-1-5E19
Deutsch
English
461V FA
LCD-Bildschirm
LCD monitor
Moniteur LCD
Monitor LCD
Monitor LCD
LCD-skärm
LCD-beeldscherm
Betriebsanleitung
Operating Manual
Français
Español
Italiano
Svenska
Nederlands
TCO'99
Ausgabe Dezember 2000
December 2000 edition
VESA, DDC und DPMS sind eingetragene Warenzeichen der Video Electronics Standards
Association.
Copyright ã Fujitsu Siemens Computers GmbH 2000
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des
Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren.
Zuwiderhandlungen verpflichten zu Schadenersatz.
Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung.
Liefermöglichkeiten und technische Änderungen vorbehalten.
Dieses Handbuch wurde erstellt von
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
VESA, DDC and DPMS are registered trademarks of Video Electronics Standards
Association.
Copyright ã Fujitsu Siemens Computers GmbH 2000
All rights, including rights of translation, reproduction by printing, copying or similar methods,
even of parts are reserved.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or design,
are reserved.
Delivery subject to availability. Right of technical modification reserved.
This manual was produced by
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Contents
Introduction........................................................................................................................................ 1
Notational conventions ..............................................................................................................2
Important notes .................................................................................................................................2
Safety........................................................................................................................................2
Cleaning.................................................................................................................................... 3
Transport...................................................................................................................................3
FCC Class B Compliance Statement.........................................................................................4
Important note on power cable ..................................................................................................4
Declaration of Conformity..........................................................................................................6
Energy Star Guidelines..............................................................................................................6
CE certificate.............................................................................................................................6
Disposal and recycling...............................................................................................................7
Checking the contents of the consignment ........................................................................................7
Installing an ergonomic video workstation .........................................................................................8
Connecting the monitor......................................................................................................................8
Connecting cables to the monitor ..............................................................................................9
Connecting cables to the computer..........................................................................................10
Operation of the monitor..................................................................................................................10
Adjusting rake and rotation......................................................................................................10
Switching the monitor on/off ....................................................................................................11
Notes on power management..................................................................................................12
Changing the monitor settings.................................................................................................12
Notes on ergonomic colour adjustment............................................................................................17
Removing the monitor base.............................................................................................................18
Technical data.................................................................................................................................18
VESA-DDC-compatible VGA interface.....................................................................................19
Preset operating modes...........................................................................................................20
Pin assignment D-SUB............................................................................................................20
Monitor port DVI-D...................................................................................................................21
Error handling..................................................................................................................................21
A26361-K708-Z100-2-5E19 English
Introduction
Your new LCD (Liquid Crystal Display) monitor 461V FA offers numerous features and functions, for
example:
• TFT display (Thin Film Transistor; active matrix)
• minimal space requirements thanks to slim housing
• optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour
purity right into the corners)
• high degree of brightness and good contrast
• high resolution (1280x1024) for displaying the information content of a conventional 21-inch
screen with CRT (Cathode Ray Tube)
• presentation of up to 16.7 million colours (in conjunction with an appropriate graphics card)
• automatic scanning of horizontal frequencies from 31 to 82 kHz and refresh rates (vertical
frequencies) from 56 to 85 Hz (absolutely flicker-free)
• digital screen controller with microprocessor for storing 28 different display modes
• freely adjustable colour alignment for matching the screen colours to the colours of various
input and output devices
• convenient operation via integrated OSD (On-Screen-Display) menu
• VESA-DDC compatibility
• VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) - mechanical
interface to swivel arm and wall bracket)
• plug&play capability
• power management for reducing power consumption when the computer system is not in use
• compliance with the recommendations in accordance with TCO ’99
In normal screen mode (dark characters against a light background) the monitor satisfies the
ergonomic requirements for the GS symbol.
This Operating Manual contains important information you require to start up and run your LCD
monitor.
A graphics card (screen controller) with VGA interface or a digital graphics card with DVI interface is
required to control the 461V FA LCD monitor. The monitor processes the data supplied to it by the
screen controller. The screen controller/the associated driver software is responsible for setting the
modes (resolution and refresh rate).
When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs (see section
"Changing the monitor settings" in chapter "Operation of the monitor
").
Target group
You don't need to be an "expert" to perform the operations described here. Do, however, read the
chapter "Important notes" in the Operating Manual of the computer and in this Operating Manual.
In the event of any problems occurring, please contact your sales outlet or our Help Desk.
Further information
Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.
A26361-K708-Z100-2-5E19 English - 1
Color monitor 461V FA
Notational conventions
The meanings of the symbols and fonts used in this manual are as follows:
Pay particular attention to texts marked with this symbol. Failure to observe this warning
endangers your life, destroys the system, or may lead to loss of data.
!
Supplementary information, remarks and tips follow this symbol.
i
Texts which follow this symbol describe activities that must be performed in the order shown.
"Quotation marks" indicate names of chapters and terms that are being emphasised.
Texts in italics indicate filenames and menu items.
Important notes
In this chapter you will find information regarding safety which is essential to take note of
with your monitor.
!
Safety
This device complies with the relevant safety regulations for data processing equipment, including
electronic office machines for use in an office environment. If you have any questions, contact your
sales outlet or our Help Desk.
• The display surface of the LCD monitor is sensitive to pressure and scratches. You should
therefore be careful with the display surface so as to avoid lasting damage (Newton rings,
scratches).
• If the device is brought into the installation site from a cold environment, condensation can
form. Before operating the device, wait until it is absolutely dry and has reached approximately
the same temperature as the installation site.
• During installation and before operating the device, please observe the instructions on
environmental conditions in the chapter entitled "Technical data" as well as the instructions in
the chapter "Installing an ergonomic video workstation".
• To ensure sufficient ventilation, the intake and exhaust air openings of the monitor must never
be blocked.
• The device automatically sets itself to the correct voltage within the range from 100 V to 240 V.
Ensure that the local mains voltage lies within these limits.
• Ensure that the power socket on the device or the grounded wall outlet is freely accessible.
• The ON/OFF switch does not disconnect the device from the line voltage. To disconnect the
line voltage completely, remove the power plug from the socket.
• Lay all cables so that nobody can stand on them or trip over them. When attaching the device,
observe the relevant notes in the chapter "Connecting the monitor".
2 - English A26361-K708-Z100-2-5E19
Color monitor 461V FA
• If you use a different data cable from the one supplied, ensure that it is adequately shielded.
CE conformance and optimum picture quality are guaranteed only if you use the data cable
supplied.
• No data transmission cable should be connected or disconnected during a thunderstorm.
• Make sure that no objects (e. g. jewellery chains, paper clips etc.) or liquids get into the inside
of the device (danger of electric shock, short circuit).
• In emergencies (e. g. damaged casing, elements or cables, penetration of liquids or foreign
matter), switch off the unit, disconnect the power plug and contact your sales outlet or our Help
Desk.
• The screen background lighting contains mercury. You must observe the applicable handling
and disposal safety regulations for fluorescent tubes.
• If the LCD monitor is damaged (for example the glass is broken), avoid letting any liquids that
may escape coming into contact with any part of your body (skin, mouth, nose) or foodstuffs.
Clean parts of the body and clothing that have already come into contact with such liquids with
plenty of soap and water.
Do not breathe in any of the escaping vapours. You should contact your doctor if you have
breathed in fumes or come into contact with the liquid.
• Only qualified technicians should repair the device. Unauthorised opening and incorrect repair
may greatly endanger the user (electric shock, fire risk).
• You may set only those resolutions and refresh rates specified in the "Technical data" chapter.
Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or
our Help Desk.
• Keep this Operating Manual together with your device. If you pass on the device to third
parties, you should include these.
Cleaning
• Always pull out the power plug before you clean the monitor.
• Do not clean any interior parts yourself, leave this job to a service technician.
• Do not use any cleaning agents that contain abrasives or may corrode plastic.
• Ensure that no liquid will run into the system.
• Ensure that the ventilation areas of the monitor are free.
• The display surface of the LCD monitor is sensitive to pressure and scratches. Clean it only
using a soft, slightly moistened cloth.
Wipe the monitor housing with a dry cloth. If the monitor is particularly dirty, use a cloth which has
been moistened in mild domestic detergent and then carefully wrung out.
Transport
• Transport the monitor with care and only in its original packaging or another corresponding
packaging fit to protect it against knocks and jolts.
• Never drop the LCD monitor (danger of glass breakage).
A26361-K708-Z100-2-5E19 English - 3
Color monitor 461V FA
FCC Class B Compliance Statement
The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statement for other products will appear in the accompanying documentation.
NOTE:
This equipment has been tested and found to comply with the limits for a "Class B" digital device,
pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian InterferenceCausing Equipment Regulations. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in strict accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused
by unauthorized modifications of this equipment or the substitution or attachment of connecting
cables and equipment other than those specified by Fujitsu Siemens Computers GmbH The
correction of interference caused by such unauthorized modification, substitution or attachment will
be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC rules.
Important note on power cable
To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary
to replace the original cable set.
• The female/male receptacles of the cord set must meet CEE-22 requirements.
• The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the
outer sheath or on the insulation of one of the inner conductors.
• For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.
For devices which sit on the floor, only SJT type cable sets may be used.
• The cable set must be selected according to the current rating for your device.
4 - English A26361-K708-Z100-2-5E19
Color monitor 461V FA
Power cable for devices distributed in the US and Canada
In the United States and Canada the cord set must also be UL-listed and CSA-labelled. The voltage
rating should be min. 250 volts a.c.
Please consult the following table for the selection criteria for power cables used in the United
States and Canada.
Cable type Size of conductors in cable Maximum current rating of the device
SJT 18 AWG
16 AWG
14 AWG
SVT 18 AWG
17 AWG
For the United Kingdom
Should the plug on the flexible cord not be of the type for your socket outlets, do not use an adapter
but remove the plug from the cord and discard. Carefully prepare the end of the supply cord and fit a
suitable plug.
WARNING
THIS APPLIANCE MUST BE EARTHED
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Green and Yellow: Earth
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
10 Amps
12 Amps
12 Amps
10 Amps
12 Amps
• The wire which is coloured Green and Yellow must be connected to the terminal in the plug
which is marked with the letter E or by the earth symbol or coloured Green or Green and
Yellow.
• The wire which is coloured Blue must be connected to the terminal which is marked with the
letter N or coloured Black.
• The wire which is coloured Brown must be connected to the terminal which is marked with the
letter L or coloured Red.
A26361-K708-Z100-2-5E19 English - 5
Color monitor 461V FA
8
0
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Product Name: LCD Monitor
Trade Name: Fujitsu Siemens Computers
Model Number(s): 461V FA
Name of Responsible Party: Siemens Information and Communication
Contact Person: Mike Fitzner
Phone No.: (408) 428-891
Fax No.: (408) 428-729
We, Siemens Information and Communication Products LLC, hereby declare that the equipment
bearing the trade name and model number specified above was tested confirming to the applicable
FCC Rules under the most accurate measurement standards possible, and that all the necessary
steps have been taken and are in force to assure that production units of the same equipment will
continue to comply with the Commissions requirements.
Products LLC
3860 N. First Street
San Jose, CA 95134-1702
U.S.A.
Energy Star Guidelines
The Fujitsu Siemens LCD colour monitor 461V FA is designed to
conserve electricity by dropping to less than 5 W when it goes into
standby, suspend and OFF mode. With this new power management the
461V FA qualifies for the U.S. Environmental Protection Agency's (EPA)
Energy Star Computers award.
The EPA estimates that computer equipment uses 5 percent of all business electricity and it is
growing rapidly. If all desktop computers and peripherals enter a low-power mode when not in use,
the overall savings in electricity could amount to $ 2 billion annually. These savings could also
prevent the emission of 20 million tons of carbon dioxide into the atmosphere - the equivalent of 5
million automobiles.
As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product
meets the Energy Star guidelines for energy efficiency.
CE certificate
The shipped version of this device complies with the requirements of the EEC
directives 89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage
directive".
6 - English A26361-K708-Z100-2-5E19
Color monitor 461V FA
Disposal and recycling
This device has been manufactured to the greatest possible degree from materials which can be
recycled or disposed of in a manner that is not environmentally damaging. The device is taken back
after use, to be recycled, provided that it is returned in a condition that is the result of normal use.
Any components not reclaimed will be disposed of in an environmentally acceptable manner.
If you have any questions on disposal, please contact your local office, our Help Desk, or:
Fujitsu Siemens Computers GmbH
Recyclingcenter
D-33106 Paderborn
Tel.: +49 5251 / 81 80 10, Fax: +49 5251 / 81 80 15
Checking the contents of the consignment
Ê Unpack all the individual parts.
Ê Check the delivery for damage incurred during transportation.
Ê Check whether the delivery agrees with the details in the delivery note.
The complete LCD monitor package includes:
− one monitor
− one data cable (D-SUB)
− one power cable
− one floppy disk
− one warranty card
− this Operating Manual
Should you discover that the delivery does not correspond to the delivery note, notify your local
sales outlet immediately.
It is recommended not to throw away the original packing material. Keep it for future
transportation.
i
A26361-K708-Z100-2-5E19 English - 7
Color monitor 461V FA
Installing an ergonomic video workstation
Before you set up your equipment you should select a suitable position for working at the monitor.
Please observe the following advises when installing a video workstation.
edge of desk
Window
permissible
reaching sector
600 mm
permissible
reaching sector
600 mm
Avoid direct and reflected glare. Avoid glare from electric
lighting.
preferable viewing sector
0°
0°
60°
permissible
viewing sector
permissible viewing sector
Position the monitor for
60°
60°
30°
30°
Keep ventilated areas clear. Remember to maintain correct
optimum viewing. The viewing
Position the keyboard where it
is easiest to reach.
approx. 90°
approx. 90°
and
more
posture.
distance to the monitor should
be approximately 50 cm.
Depending on the situation, the use of a swivel arm or wall bracket (VESA FPMPMI), which are
available from specialised dealers, may be advisable. For this purpose the monitor base must be
removed beforehand as described in chapter "Removing the monitor base".
Connecting the monitor
Please note the information provided in the "Safety" section in the chapter "Important
notes" at the beginning of this manual.
!
CE conformance and optimum picture quality are guaranteed only if you use the data
cable supplied.
Do not cover the ventilation openings of the monitor.
The computer power plug must be pulled!
Ê Be sure that the monitor and the computer are switched off.
8 - English A26361-K708-Z100-2-5E19
Connecting cables to the monitor
The monitor ports are protected by a cover.
Color monitor 461V FA
A26361-K708-Z100-2-5E19 English - 9
Color monitor 461V FA
Connecting cables to the computer
Information on the computer connections and interfaces is contained in the operating manual for
your computer.
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is usually active.
i
Ê Connect the data cable to the (active) monitor port on the computer and secure the plug-in
connection by tightening the safety screws.
Ê Connect the male receptacle of the power cable supplied to the monitor socket of the computer
and ensure a secure connection.
Ê Plug the power connector of the computer into a properly grounded power outlet.
When you start working with your monitor for the first time you should install the
appropriate graphics drivers for your application software. Details of how to do this are
i
provided in the documentation on your screen controller/the associated driver software.
Operation of the monitor
The monitor offers the following possibilities that enable it to be optimally adjusted for the respective
user and the respective situation.
Adjusting rake and rotation
The rake of the monitor can be adjusted by -2° (forward) and +20° (back) from its vertical position.
Ê Grasp the monitor with both hands on the right and left edge of the housing and adjust it to the
desired rake.
The monitor can be rotated by ± 30° from its centre position.
Ê Grasp the monitor with both hands on the right and left edge of the housing and rotate it into
the desired position.
10 - English A26361-K708-Z100-2-5E19
Switching the monitor on/off
Color monitor 461V FA
A26361-K708-Z100-2-5E19 English- 11
Color monitor 461V FA
Notes on power management
If your computer is equipped with power management, the monitor can support this function fully.
Here the monitor does not distinguish between the individual energy-saving modes of the computer
(standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the
mode with the highest energy-saving effect.
Stage ON Energy-saving mode
Power indicator glows green glows amber
Function Monitor operating
Power consumption normal
If your computer detects inactivity (no input) it sends an appropriate signal to the monitor to reduce
the power consumption (energy-saving mode). The power indicator of the monitor changes colour to
indicate the status change.
Once an input is made at the computer the screen contents are redrawn and full power is restored.
For detailed information on how energy-saving mode operates refer to the Operating Manual or
Technical Manual of your computer.
When the monitor is switched to the energy-saving mode by the power management
system a power consumption of up to 5 W is maintained to feed the circuit for redrawing
i
the screen contents.
To completely switch off the power consumption, switch off the computer or pull the plug
of the monitor power cable out of the monitor socket of the computer.
normally
<65W
Monitor
is dark
reduced
to < 5 W
Changing the monitor settings
When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs.
Basic monitor settings with the floppy disk supplied
If one of the operating systems Windows for Workgroups, Windows 95/98, Windows NT or OS/2
(with Windows emulation installed) is used, the basic monitor settings can be set with the floppy disk
supplied.
Ê Insert the supplied floppy disk into the floppy disk drive.
Ê Open the Readme file on the floppy disk and follow the instructions in the file.
Your monitor should now already be properly adjusted. If none of the above operating systems is
used or minor corrections are to be made to the screen display, then change the monitor settings
with the OSD menu.
12 - English A26361-K708-Z100-2-5E19
Color monitor 461V FA
r
Monitor settings with the buttons of the control panel
With the buttons of the control panel, you can make the following settings directly: auto-adjustment
of the monitor, adjusting the brightness and adjusting the contrast.
Other settings are carried out via an integrated OSD menu (On-Screen Display). For
additional information, refer to the section "Monitor settings using the OSD menu".
i
AUTO
1
1 = AUTO button
2 = Arrow buttons and OK button
Performing auto-adjustment of the monitor
OK
234
3 = Power indicator
4 = ON/OFF switch
Ê Press the AUTO button.
The picture quality (PHASE, CLOCK) and picture position will be optimally adjusted for your system.
Adjusting the brightness and contrast
Contrast and brightness are adjusted directly with the arrow buttons.
You will increase the life of your screen if you adjust the brightness to medium.
i
Ê Press the or button (brightness) or or (contrast).
A window is displayed with a setting range (in this case BRIGHTNESS).
BRIGHTNESS
50
Ê Press the or button to adjust the
brightness.
Ê Press the or button to adjust the
contrast.
The setting window disappears afte
approximately 3 seconds if no further setting is
made. All changes are stored automatically.
A26361-K708-Z100-2-5E19 English- 13
Color monitor 461V FA
Monitor settings using the OSD menu
With the buttons on the control panel, call up and use the integrated OSD (On-Screen Display)
menu.
The OSD menu is available in different languages. The English menu names are used in
the following description (default setting). With the OSD function LANGUAGE you can
i
select another language.
To set the OSD menu, perform the following steps:
Ê Briefly press the
The main menu appears on the screen with icons for the setting functions.
MAIN CONTROLS
?
LANGUAGE
ADJUST POSITION
ADJUST SIZE
BRIGHTNESS & CONTRAST
IMAGEOPTIMIZATI ON
ADJUST COLOR
OSD SETTINGS
i
PRODUCT INFORMATION
RESET TO FACTORY SETTINGS
INPUT SELECTION
EXIT MAIN CONTROLS
OK
button to activate the OSD menu.
The first symbol (LANGUAGE) is highlighted.
Ê If necessary, press the or button to
mark another icon (e. g. ADJUST
POSITION).
Ê Press the
highlighted icon.
OK
button to select the
MOVE SELECTION THEN
OK
The corresponding setting window (here: ADJUST POSITION) is displayed.
Ê Press the or button to adjust the
selected function (here: HORIZONTAL).
Ê Press the key or to mark another
function or press the key
OK
to return to the
main menu.
Ê Select the symbol (EXIT MAIN
CONTROLS) in the main menu and press
the key
All changes are stored automatically.
If you want to change other settings, select the corresponding function from the OSD main menu. All
possible adjustments of the main menu are described in the following.
14 - English A26361-K708-Z100-2-5E19
OK
to exit the OSD menu.
The OSD menu for analogue monitor operation is described in the following. During digital
operation some functions are not available, as they are not required due to the digital
i
transmission technology used.
Setting language for the OSD menu
?
Adjusting picture position
Adjusting size
Setting language for the OSD menu (LANGUAGE)
You can choose from English (default setting), German, French, Spanish, Italian,
and Japanese.
Calling the ADJUST POSITION setting window
Horizontal picture position (HORIZONTAL): Shifting the picture to the left
or to the right
Vertical picture position (VERTICAL): Shifting the picture down or up
Calling the ADJUST SIZE setting window
Switching the full-screen mode on (FULL SCREEN)
The display area is stretched to the full picture size (1,280 pixels, side ratio 5:4).
This will cause other resolutions to appear distorted.
Switching the full-screen mode off (NATIVE MODE)
Setting the individual picture size (USER SETTINGS)
Color monitor 461V FA
Adjusting the brightness and contrast
Calling the BRIGHTNESS & CONTRAST setting window
Setting the brightness of the display (BRIGHTNESS)
Setting the contrast of the display (CONTRAST)
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be
i
achieved.
A26361-K708-Z100-2-5E19 English- 15
Color monitor 461V FA
Setting the picture quality
Calling the IMAGE OPTIMIZATION setting window
Eliminating picture interference (VIDEO NOISE):
Eliminating picture noise and horizontal interference (PHASE)
Eliminate vertical interference with local fuzziness (CLOCK)
Setting the mode for the optimal display of texts or graphics and pictures
(TEXT/GRAPHICS)
Setting the colour temperature
The "warmth" of the screen colours is set using the colour temperature. The colour temperature is
measured in K (= Kelvin).
Calling the ADJUST COLOR setting window
ORIGINAL PANEL COLOR = Setting for general applications (default setting)
9300K FOR CAD/CAM USE = Setting for CAD/CAM programmes
6500K FOR IMAGE MANAGEMENT = Setting, for example, for image processing or
playing DVDs
USER PRESET = User-defined setting
In the user-defined setting you can change the colour ratios of the basic colours
(red, green, blue) as required.
Setting position for the OSD menu
Calling the OSD SETTINGS setting window
You can shift the OSD menu up, down, to the left or to the right.
Displaying monitor data
i
Activating the factory settings
16 - English A26361-K708-Z100-2-5E19
Under PRODUCT INFORMATION you will find the serial number and the current
resolution of the monitor.
Activating the factory settings (RESET TO FACTORY SETTINGS)
NO = retain own settings
YES = Activating the factory settings
With YES all monitor settings are reset to the factory settings.
Color monitor 461V FA
Selecting input signal
The monitor can be operated with analogue or digital signals. With this function you can (depending
on the graphics card you use) switch over between the analogue and the digital mode.
Calling the INPUT SELECTION setting window
Switch on the analogue mode (ANALOG). The monitor processes the signals of
the analogue port (VGA/D-SUB).
Switch on the digital mode (DIGITAL). The monitor processes the signals of the
digital port (DVI-D).
Locking the OSD menu (OSD Lock)
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor
settings.
Ê Press the
Please proceed in the same manner to release the locked OSD menu again.
OK
button and hold it for approx. 10 seconds.
Notes on ergonomic colour adjustment
If you select colours for the display in your application programs, take note of the information below.
The primary colours blue and red on a dark background do not produce the minimum required
contrast of 3:1 and are therefore not suitable for continuous text and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Background Characters
black white purple blue cyan green yellow red
black + + - + + + white + + + - - - +
purple + + - - - - -
blue - + - + - + -
cyan + - - + - - -
green + - - + - - -
yellow + - + + - - +
red - + - - - - +
+ Colour combination very suitable
- Colour combination not suitable because colour locations are too close together, thin
characters are not identifiable or rigorous focusing is demanded of the human eye.
A26361-K708-Z100-2-5E19 English- 17
Color monitor 461V FA
Removing the monitor base
Before you can use a swivel arm or a wall bracket, you must remove the monitor base:
18 - English A26361-K708-Z100-2-5E19
Color monitor 461V FA
Accessories: Power cable (1.8 m)
Storable display modes: 28
Electrical data
Video: Analogue, positive, 0.7 V
Synchronisation: Separate Sync. TTL, positive or negative
Horizontal frequency: 31 kHz .... 82 kHz (multi-scanning)
Refresh rate: 56 Hz .... 85 Hz
Maximum pixel rate: 135 MHz
Power supply: switches automatically
Total power consumption: < 65 W (ON, Normal mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
Humidity:
Limit range of operation:
Humidity:
Condensation must be avoided.
D-SUB data cable (1.8 m)
,75Ω
Digital: DVI-
Composite Sync. TTL, positive or negative
Sync. On Green
100 V - 120 V, 50 Hz - 60 Hz ± 2 Hz, 0.6 A
220 V -240 V, 50 Hz - 60 Hz ± 2 Hz, 0.3 A
< 5 W in the energy-saving mode (standby mode, suspend
mode and OFF mode)
15 °C .... 35 °C
20 % .... 85 %
5 °C .... 35 °C
20 % .... 85 %
pp
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
If the monitor 461V FA is not yet displayed in the list of monitors, you can select the
following monitor instead:
i
Fujitsu Siemens MCF 4611 TA, Fujitsu Siemens 4612 FA
A26361-K708-Z100-2-5E19 English- 19
Color monitor 461V FA
r
Preset operating modes
The picture position and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the screen controller used, it may be
i
necessary to adjust the display position and size. In this case, you can change and save
the settings (see "Operation of the monito
The following are the most frequently used of the preset operating modes:
Horizontal frequency Refresh rate Screen resolution
31.5 kHz
31.5 kHz
37.5 kHz
37.9 kHz
46.9 kHz
48.4 kHz
60.0 kHz
64.0 kHz
80.0 kHz
For ergonomic reasons, a screen resolution of 1024 x 1280 pixels is recommended. Because of the
technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a
refresh rate of 60 Hz.
70 Hz
60 Hz
75 Hz
60 Hz
75 Hz
60 Hz
75 Hz
60 Hz
75 Hz
").
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
Pin assignment D-SUB
1
5
6
10
11
15
Pin Meaning Pin Meaning
1 Video input red 9 +5 V (DDC)
2 Video input green 10 Sync. ground
3 Video input blue 11 Ground
4 Ground 12 DDC-Data
5 Ground 13 H. sync
6 Red video ground 14 V. sync
7 Green video ground 15 DDC Clock
8 Blue video ground
20 - English A26361-K708-Z100-2-5E19
Color monitor 461V FA
Monitor port DVI-D
1
9
17
Pin Meaning Pin Meaning Pin Meaning
1 TMDS Data2- 9 TMDS Data1- 17 TMDS Data02 TMDS Data2+ 10 TMDS Data1+ 18 TMDS Data0+
3 TMDS Data 2/4
Shield
4 TMDS Data4- 12 TMDS Data3- 20 TMDS Data55 TMDS Data4+ 13 TMDS Data3+ 21 TMDS Data5+
6 DDC Clock 14 +5V Power 22 TMDS Clock Shield
7 DDC Data 15 Ground 23 TMDS Clock8 Analogue Vertical
Sync
11 TMDS Data 1/3
Shield
16 Hot Plug Detect 24 TMDS Clock+
19 TMDS Data 0/5 Shield
Error handling
Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another computer and/or with another data cable.
If you are unable to solve the problem, please inform our Help Desk.
The display is too small or not centred
The monitor recognises an undefined mode (see "Technical data ").
Ê Adjust the picture size and position (see "Operation of the monitor").
No display (power indicator does not light)
Ê Check whether the monitor is switched on.
Ê Check whether the power cable on the monitor is connected correctly.
Ê Check whether the monitor socket of the computer is live.
A26361-K708-Z100-2-5E19 English- 21
Color monitor 461V FA
No display (power indicator lights)
Ê Check whether the computer is switched on.
Ê Check whether the data cable for the monitor is correctly attached to the monitor and the
monitor port on the computer.
Ê Press any key on the computer keyboard – the computer may be in energy saving mode.
Ê Alter the brightness and/or contrast until you get a picture.
Picture disturbances (vertical and horizontal lines, picture noise)
Ê Press the AUTO button to conduct the auto-adjustment of the screen.
Ê Adjust the picture quality in the IMAGE OPTIMIZATION adjustment window.
If one of the operating systems Windows for Workgroups, Windows 95/98, Windows NT
or OS/2 (with Windows emulation installed) is used, the monitor can be adjusted with the
i
floppy disk supplied.
Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels may be present. The maximum permitted number
of pixels faults is stipulated in the stringent international standard ISO 13406-2 (Class II).
Example: a 17" or 18" flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 =
1310720 pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 4
million dots in total.
According to ISO 13406-2 (Class II), a maximum of 6 pixels and 7 subpixels may be defective, i. e.
a total of 25 faulted dots. This corresponds to approx. 0.0006 % of the entire screen surface!
The flat screen monitors from Fujitsu Siemens Computers are typically considerably better than
requirements defined in this standard.
The screen becomes darker
The background lighting has a limited lifetime. If your monitor display should become too dark, the
background lighting will have to be exchanged. Please contact our Help Desk.
Image of last screen display still visible
If you switch from a high-contrast display (for example black lines/characters on a white
background) to a picture of medium brightness, you may be able to see a faint image of the previous
display for a time. This phenomenon is not due to a monitor defect but to the technology used (IPS
display with large viewing angle, IPS = In Plane Switching).
22 - English A26361-K708-Z100-2-5E19
Loading...