Fujitsu 3816 FA Owner's Manual

A26361-K882-Z100-5-5E19 English

Contents

Introduction........................................................................................................................................1

Notational conventions ..............................................................................................................2

Important notes .................................................................................................................................2

Safety........................................................................................................................................2

Cleaning ....................................................................................................................................3

Transport................................................................................................................................... 3

FCC Class B Compliance Statement......................................................................................... 3

Declaration of Conformity ..........................................................................................................4

Power cable...............................................................................................................................4

Energy Star Guidelines..............................................................................................................5

CE marking................................................................................................................................5

Disposal and recycling............................................................................................................... 5

Checking the contents of the consignment ........................................................................................5

Installing an ergonomic video workstation..................................................................................6

Connecting the monitor......................................................................................................................7

Height adjustment and ability to turn..........................................................................................8

Tilting and turning area..............................................................................................................9

Operation of the monitor.................................................................................................................. 10

Switching the monitor on/off ....................................................................................................10

Notes on power management.................................................................................................. 11

Changing the monitor settings .................................................................................................11

Notes on ergonomic colour adjustment............................................................................................15

Technical data................................................................................................................................. 16

VESA-DDC-compatible VGA interface.....................................................................................17

Supported modes ....................................................................................................................17

Pin assignment D-SUB............................................................................................................18

Monitor port DVI-D...................................................................................................................19

Trouble shooting.............................................................................................................................. 19

A26361-K882-Z100-5-5E19 English - 1

Introduction

Your new LCD (Liquid Crystal Display) monitor 3816 FA offers numerous features and functions, for
example:

• TFT display (Thin Film Transistor; active matrix)

• minimal space requirements thanks to slim casing

• height adjustment and ability to turn (portrait mode)

• optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour

purity right into the corners)

• high degree of brightness and good contrast

• high resolution (1024x768) for displaying the information content of a conventional 17-inch

screen with CRT (Cathode Ray Tube)

• presentation of up to 16.7 million colours (in conjunction with an appropriate graphics card)

• automatic scanning of horizontal frequencies from 30 to 61 kHz and refresh rates (vertical

frequencies) from 55 to 75 Hz (all absolutely flicker-free)

• digital screen controller with microprocessor for storing 18 different display modes

• freely adjustable colour alignment for matching the screen colours to the colours of various

input and output devices

• convenient operation via integrated OSD (On-Screen-Display) menu

• VESA-DDC compatibility

• VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface, mechanical

interface to swivel arm and wall bracket); 75 mm hole spacing

• plug&play capability

• power management for reducing power consumption when the computer system is not in use

• compliance with the recommendations in accordance with TCO ’99

• compliance with the ergonomic standards ISO 13406-2

In normal screen mode (dark characters against a light background) the monitor satisfies the
ergonomic requirements for the GS symbol.

This Operating Manual contains important information you require to start up and run your LCD
monitor.

A screen controller with VGA interface is required to control the 3816 FA LCD monitor. The monitor
processes the data supplied to it by the screen controller. The screen controller/the associated
driver software is responsible for setting the modes (resolution and refresh rate).

When putting the monitor into operation for the first time, the screen display should be optimally
adapted to the screen controller used and adjusted in accordance with your needs (see the
"Changing the monitor settings" section in the"Operation of the monitor" chapter).

Target group

You don't need to be an "expert" to perform the operations described here. Do, however, read the
chapter "Important notes" in the Operating Manual of the computer and in this Operating Manual.

In the event of any problems occurring, please contact your sales outlet or our Help Desk.

Further information

Details of how you set the resolution and refresh rate are provided in the documentation on your
screen controller/the associated driver software.

LCD monitor 3816 FA

2 - English A26361-K882-Z100-5-5E19

Notational conventions

The meanings of the symbols and fonts used in this manual are as follows:

!

Pay particular attention to text marked with this symbol. Failure to observe this warning
endangers your life, destroys the device, or may lead to loss of data.

i

Supplementary information, remarks, and tips follow this symbol.

Ê Text which follows this symbol describes activities that must be performed in the order shown.

"Quotation marks" indicate names of chapters or terms.
Texts in italics indicate filenames and menu items.

Important notes

!

In this chapter you will find information regarding safety which is essential to take note of
with your monitor.

Safety

This device complies with the relevant safety regulations for data processing equipment, including
electronic office machines for use in an office environment. If you have any questions, contact your
sales outlet or our Help Desk.

• Use only a type "LAD6019AB4" or "LI-SHIN LSE9901A1250" power adapter.

• The display surface of the LCD monitor is sensitive to pressure and scratches. You should

therefore be careful with the display surface so as to avoid lasting damage (Newton rings,
scratches).

• If the device is brought into the installation site from a cold environment, condensation can

form. Before operating the device, wait until it is absolutely dry and has reached approximately
the same temperature as the installation site.

• During installation and before operating the device, please observe the instructions on

environmental conditions in the "Technical data" chapter as well as the instructions in the
"Installing an ergonomic video workstation" chapter.

• To ensure sufficient ventilation, the monitor may only be operated with the monitor base, swivel

arm or wall bracket.

• Ensure that the power socket on the device or the grounded mains outlet is freely accessible.

• The ON/OFF switch does not disconnect the device from the mains voltage. To completely

disconnect the mains voltage, remove the power plug from the socket.

• Lay all cables so that nobody can stand on them or trip over them. When attaching the device,

observe the relevant notes in the chapter "Connecting the monitor".

• No data transmission cable should be connected or disconnected during a thunderstorm.

• Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the

device (danger of electric shock, short circuit).

LCD monitor 3816 FA

A26361-K882-Z100-5-5E19 English - 3

• In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign

matter), switch off the unit, disconnect the power plug and contact your sales outlet or our Help

Desk.

• The screen background lighting contains mercury. You must observe the applicable handling

and disposal safety regulations for fluorescent tubes.

• Only qualified technicians should repair the device. Unauthorised opening and incorrect repair

may greatly endanger the user (electric shock, fire risk).

• You may set only those resolutions and refresh rates specified in the "Technical data" chapter.

Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or

our Help Desk.

• Keep this operating manual together with your device. If you pass on the device to third parties,

you should include this manual.

Cleaning

• Always pull out the power plug before you clean the monitor.

• Do not clean any interior parts yourself, leave this job to a service technician.

• Do not use any cleaning agents that contain abrasives or may corrode plastic.

• Ensure that no liquid will run into the system.

• Ensure that the ventilation areas of the monitor are free.

• The display surface of the LCD monitor is sensitive to pressure and scratches. Clean it only

using a soft, slightly moistened cloth.
Wipe the monitor casing with a dry cloth. If the monitor is particularly dirty, use a cloth which has

been moistened in mild domestic detergent and then carefully wrung out.

Transport

• Transport the monitor with care and only in its original packaging or another corresponding

packaging fit to protect it against knocks and jolts.

• Never drop the LCD monitor (danger of glass breakage).

FCC Class B Compliance Statement

The following statement applies to the products covered in this manual, unless otherwise specified
herein. The statement for other products will appear in the accompanying documentation.

NOTE:

This equipment has been tested and found to comply with the limits for a "Class B" digital device,
pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference­Causing Equipment Regulations. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in strict accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.

LCD monitor 3816 FA

4 - English A26361-K882-Z100-5-5E19

If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused
by unauthorized modifications of this equipment or the substitution or attachment of connecting
cables and equipment other than those specified by Fujitsu Siemens Computers GmbH The
correction of interference caused by such unauthorized modification, substitution or attachment will
be the responsibility of the user.

The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC rules.

Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Product Name: LCD Monitor
Trade Name: Fujitsu Siemens Computers
Model Number(s): 3816 FA
Name of Responsible Party: Fujitsu Siemens Computers Inc.

598 Gibraltar Drive
Milpitas, CA 95035-6315

U.S.A.
Contact Person: Schroettle-Henning, Bernd
Phone No.: [phone]
Fax No.: [phone]

Power cable

To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary
to replace the original cable set.

• The female/male receptacles of the cord set must meet CEE-22 requirements.

• The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the

outer sheath or on the insulation of one of the inner conductors.

• For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used.

For devices which sit on the floor, only SJT type cable sets may be used.

• The cable set must be selected according to the rated current for your device.

LCD monitor 3816 FA

A26361-K882-Z100-5-5E19 English - 5

Energy Star Guidelines

The Fujitsu Siemens LCD colour monitor 3816 FA is designed to conserve
electricity by dropping to less than 5 W when it goes into standby,
suspend and OFF mode. With this new power management the 3816 FA
qualifies for the U.S. Environmental Protection Agency's (EPA) Energy
Star Computers award.

The EPA estimates that computer equipment uses 5% percent of all business electricity and that
this is growing rapidly. If all desktop computers and peripherals enter a low-power mode when not in
use, the overall savings in electricity could amount to $ 2 thousand million annually. These savings
could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - the
equivalent of 5 million automobiles.
As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product
meets the Energy Star guidelines for energy efficiency.

CE marking

The shipped version of this device complies with the requirements of the EEC
directives 89/336/EEC "Electromagnetic compatibility" and 73/23/EEC "Low voltage
directive".

Disposal and recycling

This device has been manufactured to the highest possible degree from materials which can be
recycled or disposed of in a manner that is not environmentally damaging.
The device may be taken back after use to be recycled, provided that it is returned in a condition
that is the result of normal use. Any components not reclaimed will be disposed of in an
environmentally acceptable manner.

If you have any questions on disposal, please contact your local office, our Help Desk, or:
Fujitsu Siemens Computers GmbH

Recyclingcenter
D-33106 Paderborn
Tel.: +49 5251 / 81 80 10, Fax: +49 5251 / 81 80 15

Checking the contents of the consignment

Ê Unpack all the individual parts.
Ê Check the delivery for damage incurred during transportation.
Ê Check whether the delivery agrees with the details in the delivery note.

The complete LCD monitor package includes:

− one monitor

− one data cable

− a power adapter with power adapter cable

− one power cable

− one floppy disk

− one CD (Pivot software)

− one Warranty Booklet

− this Operating Manual