24V DRIVE, 2-COLOR THERMAL PRINTER
2” TYPE MECHANISM
FTP-622MCL101/102/353/354
■ OVERVIEW
New 2-color printer (blue/black or red/black) joins FTP-602
Series. The series consists of 24V battery drive compact thermal
printers which can print at high speed.
This series is suitable as built-in printer for a variety of
applications, such as portable terminals, POS terminals, ticket
machines, coupon machines, label printers, banking machines,
measuring devices, medical equipment, etc.
■ HIGHLIGHTS
• 2 Color printing
It can print 2 colors: blue/ black or red/black
• High speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control (at monochromatic
printing).
Speed of 2-color printing: - blue and red: 80 mm/s (460
dotlines/s) maximum
- monochromatic print: 40mm/s
maximum
• Auto Cutter
Printer with auto cutter (full cut/ partial cut) is available.
• Paper auto loading function
Thermal paper can be loaded without head-up lever
operation.
• Easy head access
It is designed for easy head cleaning and head replacement.
• Two paper paths
Front and bottom paper insertion is available.
FTP-622MCL101
1
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
■ PART NUMBERS
emaNrebmuNtraP
msinahceMretnirP
rettuChtiwmsinahceMretnirP
draoBecafretnI
lellaraP*114LCD226-PTF
laireS*834LSD226-PTF
)UCM(ISL*102UC226-PTF
lellaraP
elbaCecafretnI
)scinortneC(
1
2
3
102Y144-PTF
)C232-SR(laireS103Y226-PTF
rewoP104Y226-PTF
elbaC
daeH)msinahcemotdelbmessaerpCFF(108Y226-PTF
*1: FTP-622DCL411 is ANK supported only
*2: FTP-622DSL438 has FLASH memory and can print high speed images
*3: Supports Kanji and parallel and serial interfaces
■ GENERAL SPECIFICATIONS
)noitresnirepaptnorf(101LCM226-PTF
)noitresnirepapmottob(201LCM226-PTF
)noitresnirepaptnorf(353LCM226-PTF
)noitresnirepapmottob(453LCM226-PTF
)ijnaK,cihtoG(
SpecificationsItem
Part number FTP-622MCL101/102/353/354
Printing method Thermal-sensitive line dot method
Dot structure 432 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 54 mm
Number of columns
Paper width 58mm± 60mm±
Paper thickness 60 to 100 µ m (there may be exceptions)
Printing speed 100mm/s (800 dotlines/s maximum at black-white image batch printing
Character types Alphanumeric KANA :159
Character,
dimensions(H×W),
number of
characters
12×24 dots,(1.5×3.0mm)
24×24 dots,(3.0×3.0mm)
8×16 dots,(1.0×2.0mm)
16×16 dots,(2.0×2.0mm)
ANK 36 columns (12X24 dot font max.)
0
1
International :195
JIS Kanji (Kanji CG loaded board) :approx. 6800
36 columns
18 columns
54 columns
27 columns
0
1
Interface Centronics / RS-232C standard
(Continued)
2
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
(Continued)
SpecificationsItem
Part number FTP-622MCL101/102/353/354
For head
Power
supply
Dimensions
Weight Printer Mechanism Approximately 81g
Life Head Pulse durability: 1 × 108 pulse/dot (using Fujitsu Components' standard
Environmental
conditions
For printer motor 24VDC±5% 1A maximum
For cutter motor 24VDC±5% 1A maximum
For logic 5VDC±5% 0.5 A maximum
Printer Mechanism 82 (W) × 48 (D) × 20 (H) mm
Mechanism with cutter 97 (W) × 57 (D) × 38(H) mm
Interface board 131 (W) × 89 (D) × 24 (H) mm
Mechanism with cutter Approximately 280g
Cutter 3x10
Operating temperature +5 to +40°C (Guarantee, but can operate between 0°C to +50°C)
Operating humidity 20 to 85% RH (no condensation)
Storage temperature –20 to +60°C (excluding paper)
24 VDC ±5% 1.1 (1.7A)
(24V Rav1500Ω, 25% printing ratio)
driving method)
Wear resistance: 50 km (at 25% print ratio)
3
times minimum 5x105 times minimum
Storage humidity 5 to 95% RH (no condensation)
Head temperature By thermistor
Detection Paper out/Mark detect By photointerrupter
Head release By slide switch
2 color paper (blue/black) PB770 (Mitsubishi paper)
(red/black) PB670 (Mitsubishi paper)
Recommended
thermal sensitive
paper
High sensitivity paper TF50KS-E4 (Nippon paper)
Standard paper TF60KS-E (Nippon paper), FTP-020P0104 (58mm)
PD150R (Oji paper), FTP-020P020P0701 (58mm)
Medium term paper TP60KS-F1 (Nippon paper),FTP-020P0102(58mm)
PD170R (Oji paper)
P220VBB-1 (Mitsubishi paper)
PD160R-N (Oji paper)
Long term paper AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
3
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
*2)
310
CAUTION
3-2orless
J
.
F
TFT
.
JAPAN
(MOTOR CABLE)
MCL303
S
S
■ DIMENSIONS
1. Printer mechanism
FTP-622MCL101/102
2. Printer mechanism with cutter
F
T
FTP-622MCL353/354
ênÇ…êGÇÁǻǢÇ≈â∫Ç≥Ç¢ÅB
à”íç
(96.7)
48.9
47.8
Unit: mm
2.5MAX
(OUTER LENGTH
FO MOVABLE CUTTER)
12.1
Å} 1
(73.1)
37.20.5
13.3
14.2 41.9
MCL354
(SENSOR CABLE)
(FFC)
226
241
316
APAN
.
.
T
Unit: mm
4
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
CN5
CN3
9
Interface board
105.4
87.6
41.8
21.8
5.1 5.178.7
4-Ø3.6 ±0.1
CN1
CN9
1
CN8
4
CN7
4
1
1
(39.4) (39.4)
2930
CN2
2
1
33.2
86.4
105.4
5.1120.75.1
Height of devices side
Height of solder side
1.6
5.0max
15.0max
Unit: mm
5
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
6
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
.oNlangiStnemmoC
1NESVrosnesrepaprofrewoP
2EHProttimeretpurretniotohP
3KHPedohtacretpurretniotohP
41WS1hctiwstcetedpudaeH
52WS2hctiwstcetedpudaeH
■ CONNECTOR FOR THERMAL HEAD
1.
Head side : IL-FPC-28CLIP (JAE)
Board side : 52045 (Molex) or equivalent
*1: Symbol: " " means a negative logic signal
Thermal head heat sink
Motor
1, 2, 3, ......................................15, 16
Connector Pin No.
2. Motor connectors
Motor side : PHR-4 (J.S.T.) or equivalent
Board side : B4B-PH-K-S (J.S.T.) or equivalent
.oNlangiStnemmoC
1B BgnivirdrotomesluP
2B BgnivirdrotomesluP
3A AgnivirdrotomesluP
4A AgnivirdrotomesluP
Head up level
3. Sensor connectors
Sensor : PHR-5 (J.S.T.) or equivalent
Board side : B5B-PH-K-S (J.S.T.) or equivalent
7
FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354
■ FUNCTION
ITEM ITEM
1. Test printing 8. Motor power save
2. Paper-out detection 9. Mark detection
3. Paper near end detection 10. MCU trouble detection
4. Head-up detection 11. Power on/off sequence protection
5. Abnormal temp. of thermal head detection 12. Motor protection
6. Blown fuse detection 13. Hardware timer
7. Abnormal voltage detection of head
8
Loading...