Fujioh WS06 User Manual

INSTALLATION MANUAL

www.fujioh.com

IMPORTANT

Must use this wiring diagram for installation.
Do not use Thermador wiring diagram.

WARNING

Electrical wiring should be done by a qualified person(s)
in accordance with all applicable codes and standards,
including fire-rated construction. An unqualified person
doing the work could result in fire, electric shock or injury.

This switch uses 120 V AC, Max 16 Amp. Do not connect
to other voltage or over current rate since fire, electric
shock or damage could result.

Be sure to switch power OFF at service panel before
wiring.

< CONNECTING POWER SUPPLY WIRES >

A 2-1/2" deep Wall Box must be used to allow space for

1.
wire connections between switch and 120 volt Power
Input Leads.

Switch: Red

Switch: Yellow

Switch: Black

High speed

BLACK
/120V AC

Low speed

WS06

Top

Blue

No Use

Neutral

Red

Ground

GE Switch:
ASR-4173-500
(UL Recognized
Component)

OFF

WHITE
/NEUTRAL

Black

LO

MED

HI

Switch: Blue
Medium speed

2.

Connect the electrical wires in accordance with
wiring diagram (figure 1).
Connect wires tightly and securely using wire
connectors (not supplied).

3.

Attach the wall plate, and secure with 2 screws.

Turn on the electrical circuit to the power unit. Check

4.
the ventilating functions at each speed control
positions. Make sure that the range hood has no
abnormal noises and/or vibration.

Your installation is now complete.
If you should require service or replacement
parts on your ventilation system.
contact:

Fuji Industrial USA,Inc.

16300 Christensen Rd, #212 Seattle, WA 98188

1-888-547-9880

READ AND SAVE THESE INSTRUCTIONS.

Keep this manual in a convenient place for future reference.

FIG 1

< Connection Diagram >

2-1/2" Deep Wall Box
(must be grounded)

Bowers #52 or Equivalent

FIG 2

From
Blower Moter

Motor Green or
Bare Ground Wire

- Grounded to
Wall Box

FUJI INDUSTRIAL CO.,LTD .

030984