Fujioh FDK-03A User Manual
INSTALLATION MANUAL
DUCTLESS KIT
www.fujioh.com
< NAME OF PARTS >
3-1/4" x 10"
DUCT
3-1/4" x 10" x 2'
Please confirm contents in the above figure first.
Attach the elbow to the wall
or soffit.
Attach the grill with the
screws provided to the soffit.
Please refer to cross section
FIG4 for detailed assembly.
Do the taping to each joint
with duct tape.
When installing without a
soffit, please refer FIG5
CAUTION
Do not use screws to join the duct parts.
Be careful not to expand the hole too much, and be
careful not to damage soffit etc.
CHARCOAL FILTER
SOFFIT
GRILLELBOW
SCREWS (2)
(NOT INCLUDED)
FDK-03A
The liner and the power unit are
completely installed.
Please refer to each installation
book for the installation method.
Assemble the duct and the
elbow temporarily, and decide
the location of the grill.
Adjust length by cutting the duct
to preferred length.
Cut a rectangular hole for the
grill in the soffit when the
location of the grill is decided.
Remove the protection seal of
the grill.
FIG 1 FIG 2
ELBOWS
DUCT TAPE
(NOT INCLUDED)
DUCT TAPE
3-1/4"x10" DUCT
< The cross section>
(NOT INCLUDED)
FIG 3 FIG 5
SOFFIT
BRACKET
FIG 4
GRILL
LINER
3-1/4"x10"
DUCT
POWER UNIT
GRILL
CABINET
The charcoal filter is placed
on the backside of the slot
filter and it is reinstalled in
the unit.
Note do not place the
charcoal filter over screw
hole.
SCREW
NOTE
The charcoal filter should be replaced every three to
six months, depending on the amount of cooking that
is done.
ALUMINUM SLOT FILTER
READ AND SAVE THESE INSTRUCTIONS.
Keep this manual in a convenient place for future reference.
FUJI INDUSTRIAL CO.,LTD .
BACKSIDE
FLANGE
CHARCOAL
FILTER
Finally, please install wood
hood.
Your installation is now
complete. If you should require
service or replacement parts on
your ventilation system. contact:
Fuji Industrial USA,Inc.
16300 Christensen Rd, #212 Seattle, WA 98188
1-888-547-9880
FIG 6 FIG 7
030583
Loading...