Fujioh BUF-03A User Manual
Operation Manual
RANGE HOOD
MODEL: BUF-03A
TABLE OF CONTENTS
Safety Instructions .................................................................................................. 2
Name of Parts ......................................................................................................... 4
How to Use ............................................................................................................. 5
Operating the Range Hood ................................................................................ 5
Care and Maintenance ............................................................................................ 6
Disassembling.................................................................................................... 7
Cleaning ............................................................................................................. 7
Re-assembling ................................................................................................... 7
Replacing the Light Bulb ......................................................................................... 8
Requesting Service ................................................................................................. 9
Prior to Requesting Service ............................................................................... 9
Inspection Label ................................................................................................. 9
Specifications ........................................................................................................ 10
Circuit Diagram ..................................................................................................... 10
Parts List ............................................................................................................... 11
Limited Product Warranty ...................................................................................... 12
READ AND SAVE THESE INSTRUCTIONS.
Keep this manual in a convenient place for future reference.
FUJI INDUSTRIAL CO., LTD.
1U02 1881
(BUF-03A)
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Before installation and operation, read these instructions carefully and use this product only in the manner
described by the manufacturer in the operation manual.
The signal words shown below are used to alert you to potential personal injury and property damage hazards.
There are three hazard classifications based on potentially dangerous situations.
Obey all safety instructions that show these symbols to avoid possible injury, death and property damage.
SAFETY INSTRUCTIONS
WARNING: WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
CAUTION: CAUTION used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in property damage.
WARNING
1. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have questions, contact
the manufacturer.
b) Before servicing or cleaning the unit, switch power off at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the service
disconnecting means cannot be locked, securely fasten a prominent warning device, such as
a tag, to the service panel.
2. TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy
spillovers that may ignite. Heat oils slowly on low or medium settings.
b) Always turn hood ON when cooking at high heat or when flambeing foods (i.e. Crepes Suzette,
Cherries Jubilee, Peppercorn Beef Flambe).
c) Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.
d) Use proper pan size. Always use cookware appropriate for the size of the surface element.
3. TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP
GREASE FIRE, OBSERVE THE FOLLOWING:
a) SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner.
BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE
AND CALL THE FIRE DEPARTMENT.
b) NEVER PICK UP A FLAMING PAN - you may be burned.
c) DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will
result.
d) Use an extinguisher ONLY if:
1) You have a class ABC extinguisher, and know how to operate it.
2) The fire is small and contained in the area where it started.
3) The fire department is being called.
4) You can fight the fire with your back to an exit.
4. Do not place any electrical parts in water or spray water on them. Such a situation could result
in fire or electrical shock.
5. In the situation of a potential gas leakage, do not switch the unit on and off as it could result in
a gas explosion.
6. Do not attempt to modify or repair this product. Refer all servicing to qualified personnel,
otherwise it may result in fire, electric shock, or injury.
2
CAUTION
1. For general ventilating use only. Do not use to exhaust hazardous or explosive material and
vapors.
2. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent
exhaust air into spaces within walls, ceilings or into attics, crawl spaces or garages.
3. Read specification label on this product for further information and requirements.
4. Switch power off at the service panel when you won’t be using the range hood for a long
period. If you do not do so, damage to the electrical insulation may result.
5. Fasten the filter and other parts securely. Incorrect attachment may result in personal injury
or damage to property.
6. Do not use a commercially sold filter or filter cover on the filter part as it may affect its
performance and cause of troubles.
7. Keep your hands and other objects away from the fan while it is in motion. If not, personal
injury or damage may result.
8. To protect hands from injury from the edges of the sheet metal, wear working gloves while
servicing.
NOTE: The safety instructions are explained with the following
pictographic symbols.
: means prohibition. It indicates actions, if any, that
mustn’t be done.
: means forcible execution. It indicates actions, if any,
that must be done.
3
name of parts
Enclosure
Front cover
Lamp (MR16, GU10, 50Watt)
(Not supplied)
Switch
Filter
<Control Switch Buttons>
Pilot Lamp
OFF Switch
Lamp Switch
High Switch
Medium SwitchLow Switch
4
how to use
Before operation, make sure that the screw of the filter is tightened securely.
CAUTION
• During cooking, do not touch the filters or
their screws. If the filters are attached
incorrectly, they may become detached
and fall down.
• Do not touch the lamps or their peripheral
areas when they are ON, or your hand may
be burned as they get hot.
• Do not use a gas range with nothing on
the burners. Otherwise the range hood
could become overheated and it might be
a cause of failure.
• Stop running the range hood immediately
if a fire occurs while cooking. Continued
operation of the range hood will add
intensity to the fire.
operating the Range Hood
The range hood has five control switch buttons on its front cover.
Push one of the switches ( , , ) according to your cooking need.
The fan will start rotating.
1
(Low) In case of light cooking
(Medium) Usual position
(High) In case of heavy cooking
To stop the fan, just push the button.
2
Push the button if you want to turn the light on.
To turn it off, push the button again.
3
5
care and maintenance
Clean the range hood as many times as possible (especially, clean the filter once a
month) as it becomes dirty and deteriorates in function if it’s left unclean. For a family
size of 4 to 5 people and cooking twice a day, clean the filter once every two weeks to
avoid grease contamination and grease build-up, which is difficult to clean.
CAUTION
• Before replacing the light bulb or cleaning
the range hood, be sure to turn the push
button switch OFF and switch off the
breaker of service panel.
• For safety, always wear working gloves,
safety glasses or goggles while cleaning
the filter, etc.
• Keep people away when cleaning to avoid
injury from unexpected falling of filter or
splashing of detergent.
CAUTION
• Do not splash water on the electric parts
such as the motor, switch, or connectors.
Do not use a spray type detergent to the
electric parts. It may cause trouble.
Control Switches Breaker
• Do not use solvents such as thinner,
benzine or the like and polishing powder
for cleaning the painted surfaces, facing
plates, etc. as these parts may become
lusterless or scored.
• Do not wash parts with a hard brush or
the like for cleaning as they can be
damaged.
6
disassembling
Filter
First, loosen one knob fixing the filter, then slide it to the arrow direction to disengage
from the catches.
NOTE: As the filter may be grease built-up, be careful when removing it.
Filter
Knob
cleaning
Filter
After immersing the filter in a tepid water
1
with a neutral detergent dissolved for 30
to 40 minutes, wash it with a toothbrush
or the like to remove dirt.
Clean the filter frequently to avoid grease
contamination and grease build-up, which
is difficult to clean.
Front Cover
After wiping the front cover off with a cloth
2
immersed in a neutral detergent and wring
tightly, wipe off moisture thoroughly with
a dry cloth.
re-assembling
Re-assembly will be done by following the opposite way of disassembly procedure
described in Item “disassembling”.
(1) Make sure that the filter is fixed in the appropriate position firmly.
(2) Make sure that there is no abnormal vibration sound when running.
7
replacing the light bulb
Halogen lamp
Push the lamp,
and turn it
counter clockwise.
Push the lamp,
and turn it
clockwise.
One 50W halogen light bulb can be installed in this range hood.
Prior to replacing the light bulb, purchase a halogen light bulb (Bulb type MR16, GU10),
rated 120V - 50W or below.
To remove the light bulb, push and turn it counterclockwise. Then, replace the light bulb
with a new one.
NOTE:
• When replacing the bulb, wait until it has cooled off before removing, or you may burn
your hand.
• When installing the bulb, be sure to fix to the socket securely.
To remove the light bulb
8
To install the light bulb
Halogen lamp
(MR16, GU10: 50W)
Loading...