Fujioh BUF-02, BUF-01 User Manual
Installation Manual
RANGE HOOD
MODEL:BUF-01
BUF-02
TABLE OF CONTENTS
Safety Instructions .................................................................................................. 2
Name of Parts ......................................................................................................... 4
Size & Dimensions .................................................................................................. 4
Range Hood Location ............................................................................................. 5
Installation ............................................................................................................... 6
1. Preparation ..................................................................................................... 6
2. Range Hood Mounting .................................................................................... 8
3. Connecting Power Supply Wires ................................................................... 10
4. Final Assembly and Check............................................................................ 12
5. Explanation to the End User ......................................................................... 13
Circuit Diagram ..................................................................................................... 13
READ AND SAVE THESE INSTRUCTIONS.
Keep this manual in a convenient place for future reference.
FUJI INDUSTRIAL CO., LTD.
1U030584
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Before installation and operation, read these instructions carefully and use this product only in the manner
described by the manufacturer in the operation manual.
The signal words shown below are used to alert you to potential personal injury and property damage
hazards.
There are three hazard classifications based on potentially dangerous situations.
Obey all safety instructions that show these symbols to avoid possible injury, death and property damage.
SAFETY INSTRUCTIONS
WARNING: WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION: CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
CAUTION: CAUTION used without the safety alert symbol indicates a potentially hazardous
situation which, if not avoided, may result in property damage.
WARNING
1. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
a) Use this unit only in the manner intended by the manufacturer. If you have questions, contact
the manufacturer.
b) Before servicing or cleaning the unit, switch power off at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely fasten a prominent warning device,
such as a tag, to the service panel.
2. To reduce the risk of fire or electric shock, do not use this product with any solid-state speed
control device.
3. TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
a) Installation work and electrical wiring must be done by a qualified person(s) in accordance
with all applicable codes and standards, including fire-rated construction.
b) Sufficient air is needed for proper combustion and exhausting of gases through the flue
(chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment
manufacturer’s guidelines and safety standards such as those published by the National Fire
Protection Association (NFPA), and The American Society for Heating, Refrigeration and Air
Conditioning Engineers (ASHRAE), and the local code authorities.
c) When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden
utilities.
d) Ducted fan must always be vented to outdoors.
4. TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
5. This unit must be grounded.
6. Install this range hood to a liner. Check that the hood is correctly installed, since incorrect
installation could result in the range hood becoming detached and falling off.
7. Connect only to an AC120 Volt power source or the range hood could result in fire, electric
shock, and damage.
2
CAUTION
1. For general ventilating use only. Do not use to exhaust hazardous or explosive material and
vapors.
2. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent
exhaust air into spaces within walls, ceilings or into attics, crawl spaces or garages.
3. Read specification label on this product for further information and requirements.
4. Use only for the purpose of kitchen ventilation.
5. Do not install this range hood in the bathroom or in other wet rooms since electrical shock
and damage may result.
6. Fasten the filter and other parts securely. Incorrect attachment may result in personal injury
or property damage.
7. Keep your hands and other objects away from the fan while it is in motion. The range hood
may injure you or damage itself.
NOTE: The safety instructions are explained with the following
pictographic symbols.
: means prohibition. It indicates actions, if any, that
mustn’t be done.
: means forcible execution. It indicates actions, if any,
that must be done.
3
NAME OF PARTS
- Accessories -- Accessories -
- Accessories -
- Accessories -- Accessories Screw M5×30
Four (4) pieces
Nut with plate
Four (4) pieces
SIZE & DIMENSIONS
(Unit : inch)
4
RANGE HOOD LOCATION
The range hood must be installed just above the cooktop.
1
The minimum distance from the cooking surface to the bottom of the range hood
must be 24".
2
The total weight of the BUF-01/BUF-02 range hood unit is:
3
4
BUF-01/BUF-02 ----- 18 lbs. (8 kg)
Power requirements are:
BUF-01 AC120 V, 60 Hz, 1.3 Amp
BUF-02 AC120 V, 60 Hz, 2 Amp
CAUTION
• Check that the hood is correctly installed, since incorrect installation could result
in the detachment of the range hood and the unit fall.
• To protect hands from injury, wear working gloves when installing the range hood.
5
Loading...