Fujikura, Formerly DDK DMS3100A-F, DMS3101A-F, DMS3102A-F, DMS3106A-F, DMS3106B-F Assembly Instructions
...
DMS A/B-F Series
○ASSEMBLY INSTRUCTION
How to Assemble the Connectors
1. DMS3100A-F, DMS3101A-F, DMS3102A-F
Firstly insert the insert assembly with the contacts into the shell after matching the key of the receptacle shell
with the key groove of the insert assembly. Secondly install the retaining ring into the retaining ring groove of
the receptacle shell. After installing the retaining ring, make sure that the outer circumference of the retaining
ring is xed rmly in the groove of the shell over the entire circumference. In case the retaining ring is not
xed precisely, the retaining ring may come o from the shell by the force of mating the connectors. Finally,
install the backshell to the cable side of the receptacle shell for DMS3100A-F and DMS3101A-F.
↑ Backshell
↑ Retaining Ring
↑ Insert Assembly
↑ Receptacle Shell
2. DMS3106A-F
Firstly insert the insert assembly into the front shell. Secondly install the retaining ring into the front shell.
Thirdly, install the coupling ring. Finally, install the backshell to the cable side of the front shell. Do the same
way as the above position 1 regarding how to install the insert assembly and the retaining ring.
↑ Backshell
↑ Coupling Ring
↑ Retaining Ring
↑ Insert Assembly
↑ Front Shell
3. DMS3106B-F, DMS3108B-F
Firstly insert the insert assembly into the front shell. Secondly install the retaining ring into the front shell.
Thirdly, install the coupling ring. Finally, install the split backshells to the cable side of the front shell. Tighten
the screws after making sure that the keyways of the front shell and the keys of the backshells are on the
same line when installing the backshells, otherwise the backshells might be damaged. Do the same way as the
above position 1 regarding how to install the insert assembly and the retaining ring.
Matching position of front shell keyway and split backshell key
↑ Split Backshell
◎ Specications and/or dimensions in this catalog are subject to change without notice.
Your checking the latest specications with our drawings would be highly appreciated.
↑ Coupling Ring
↑ Retaining Ring
17
↑ Insert Assembly
↑ Front Shell
Loading...