PictBridge-compatible printer
(Commercially available)
DISCHARGEDISCHARGE OKOK
RESETRESET OKOK
USB MODEUSB MODE
SET−UPSET−UP
3/33/3
Connecting the camera directly to
the printer for printing images.
(PictBridge function)
This document covers the PictBridge function not explained in the Owner’s Manual for
FinePix S7000.
Before using the PictBridge function, be sure to read this document together with the
FinePix S7000 Owner’s Manual.
About the “PictBridge”
If a printer that supports PictBridge is available, images can be printed by connecting
the camera directly to the PictBridge-compatible printer without using a computer.
h Change the USB mode setting on the camera before connecting the camera to the Printer.
Changing the “USB MODE” in the SET-UP menu.
1Set Power switch to “q”.
2Set the Mode dial to “
SET-UP menu.
3Press “a” or “b” to select the “USB MODE”
and press “d” or “c” to select “
4Turn the camera off.
W” to display the
u¶”.
!
●
If you connect accidentally:
[Windows]
After the “New Hardware Found” wizard or “Scanner and Camera” wizard appears, click the [Cancel] button.
Then disconnect camera from PC following the disconnect procedure of camera.
[Macintosh]
After wizard for finding the driver etc. appears, click the [Cancel] button.
Then disconnect camera from PC following the disconnect procedure of camera.
Do not connect to a PC when the “USB MODE” setting is set to “u¶”.
DC IN 5V socket
USB socket
(mini-B)
PRINTING
USBUSB
CHECKING USBCHECKING USB
PRINT DPOFPRINT DPOF
PICTBRIDGEPICTBRIDGE
PRINT WITHOUT DATEPRINT WITHOUT DATE
PRINT WITH DATEPRINT WITH DATE
SETSET
OKOK
PRINT DPOF OK?PRINT DPOF OK?
TOTAL/ 19SHEETSTOTAL/ 19SHEETS
PRINT DPOFPRINT DPOF
YESYES CANCELCANCEL
OKOK
BACKBACK
PRINT DPOFPRINT DPOF
PICTBRIDGEPICTBRIDGE
PRINT WITHOUT DATEPRINT WITHOUT DATE
PRINT WITH DATEPRINT WITH DATE
SETSET
OKOK
PRINT WITHOUT DATEPRINT WITHOUT DATE
CANCELCANCEL
BACKBACK
YESYES
OKOK
FRAMEFRAME
PRINT OK?PRINT OK?
0101
SHEETSSHEETS
PRINT WITHOUT DATEPRINT WITHOUT DATE
CANCELCANCEL
BACKBACK
PRINTINGPRINTING
1Connect the camera to the printer using the USB
1
2
01
cable (mini-B).
2Turn the printer on.
!
Please connect the AC Power Adapter AC-5VH/AC-5VHS
●
(sold separately) to your camera.
!
Use a media that was formatted on the camera.
●
!
Use the USB cable (mini-B) bundled with the camera.
●
1Set the Power switch to “q” or “w” to turn the
camera on.
2“” message appears and then the
menu screen is displayed.
02
!
If the menu screen does not appear, check whether or not the
●
USB mode setting is
!
Depending on the printer, some functions are disabled.
●
If DPOF settings are already on the camera
01 02
3
1Press “a” or “b” to select “uPRINT DPOF”.
2Press the “MENU/OK” button.
“u¶”.
Specifying images for printing without using DPOF
01 02
3
01 02
4
1Press “a” or “b” to select “PRINT WITH DATE”
or “ PRINT WITHOUT DATE”. If you select
“PRINT WITH DATE”, the date is imprinted on
your prints.
2Press the “MENU/OK” button.
1Press “d” or “c” to display the frame (file) for
which you want to specify PRINT settings.
2Press “a” or “b” to set a value up to 99 as the
number of copies of the frame (file) to be printed.
!
You cannot print movie or CCD-RAW files.
●
Press the “MENU/OK” button to start printing.
5
4
!
●
!
●
Press the “MENU/OK” button to start printing.
!
●
“”message appears, the DPOF
When the
settings are not specified.
To use DPOF printing, the DPOF settings must be specified
on FinePix S7000 beforehand. See P.80 for information on
the OWNER’S MANUAL for the FinePix S7000.
Press the “BACK” button to cancel the printing. Depending on
the printer, the printing may not be canceled immediately.
◆ Disconnecting the printer ◆
!
Press the “BACK” button to cancel the printing. Depending on
●
the printer, the printing may not be canceled immediately.
1Check that the “” message is not
displayed on the camera’s screen.
2Turn the camera off.
3Unplug the USB cable (mini-B).