Thank you for your purchase of this
product. This manual describes how
to use your FUJIFILM FinePix S2900
series digital camera and the supplied
software. Be sure that you have read
and understood its contents before
using the camera.
For information on related products, visit our website at
• Read Instructions: All the safety and
operating instructions should be
read before the appliance is operated.
• Retain Instructions: The safety and
operating instructions should be
retained for future reference.
• Heed Warnings: All warnings on the
appliance and in the operating instructions should be adhered to.
• Follow Instruc tions: All operating
and use instructions should be followed.
Installation
Power Sources: This video product
should be operated only from the
type of power source indicated on
the marking label. If you are not sure
of the type of power supply to your
home, consult your appliance dealer
or local power company. For vid eo
products intended to operate from
batter y power, or other sources, refe r
to the operating instructions.
Grounding or Polarization: This video
product is equipped with a polarized alternating-current line plug (a
plug having one blade wider than
the other). This p lug will t into the
power outlet only one way. This is a
saf ety fe ature . If you are una ble to i nsert the plug fully into the outlet, try
reversing the p lug. If the plug shoul d
still fail to t, contac t your electric ian
to replace your obsolete outlet. Do
ii
IMPORTANT SAFETY INSTRUCTIONS
not defeat the safety purpose of th e
polarized plug.
Alternate Warnings: This video
product is equipped with a 3-wire
grounding-type plug, a plug having
a third (grounding) pin. This plug will
only t into a grounding- type power
outlet. This is a safety feature. If you
are unable to insert the plug into
the outlet , contact your elec trician
to replace your obsolete outlet. Do
not defeat the safety purpose of th e
grounding-type plug.
Overloading: Do not overload wall
outlets and extension cords as this
can result in a risk of re or electric
shock.
Venti lation: Sl ots and openings in the
cabinet are provided for ventilation
and to ensure reliable operation of
the video product and to protect it
from overheating, and these openings must not be blocked or covered.
The openings should never be
blocked by placing the video product on a bed, sofa, rug, or other similar surface.
This video product should not be
placed in a built-in installation such
as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been
adhered to.
This video product should never b e
pla ced nea r or ove r a radi ator or h eat
register.
Attachme nts: Do not use attach ments
not recommended by the video
product manufac turer as they may
cause hazards.
Water and M oistu re: Do not use this
video product near water – for example, near a bath tub, wash bowl,
kitchen sink , or laundr y tub, in a wet
basement, or near a swimming pool,
and the like.
Power-Cord Protection: Power-Supply cords should be routed so that
they are not likely to be walked on
or pinched by items placed upon
or against them, paying particular
attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
Accessories: Do not place this vide o
product on an unstable cart, stand,
tripod, bracket, or t able. The v ideo
product may fall, causing serious injury to a child or adult, and serious
damage to the appliance. Use only
with a car t, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the video product. Any mounting of the appliance
should follow the manufacturer’s instructions, and should use a mounting accessor y recommended by the
manufacturer.
An appliance
and cart combination should
be moved with
care. Quick sto ps,
excessive force,
and uneven surfaces may caus e the appliance and
cart combination to over turn.
Antennas
Outdoor Anten na Groundin g:
outside antenna or cable system is
connected to the video produc t, be
sure the antenna or cable system
is grounded so as to provide some
protection against volt age surges
and built-up static charges. Section
810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to proper grounding
of the mast and supporting structure, grounding of the lead- in wire
to an antenna-discharge unit, size of
grounding conductors, location of
antenna-discharge unit, connec tion
to grounding electrodes, and requirements for the grounding electrode.
If an
For Your Safety
Use
Servic e
Power Lines: An out side antenna s ystem should not b e located in the
vicinity of overhead power lines or
other elec tric light or power circuits,
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such p ower lines or circuit s
as contact with them might be fatal.
Cleaning: Unplug this video product
from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth
for cleaning.
Object and Liquid Entry: Never push
objects of any kind into this video
product through openings as they
may touch dangerous voltage
points or short out parts that could
res ult in a re o r el ect ric shoc k. N eve r
spill liquid of any kind on the video
product.
Lightning: For added protection for
this video pro duct receiver during
a lightning storm, or when it is left
unattended and unused for long pe riods of time, unplug it f rom the wall
outlet and disconnec t the antenna
or cable system. This will prevent
damage to the v ideo product due to
lightning and power-line surges.
Service
Servicing: Do not attempt to service
this video product yourself as op ening or removing covers may expose
you to dangerous voltage or other
hazards. Refer all ser vicing to quali ed service personnel.
Damage Requiring Service: Unplug this
video product from the wall outlet
and refer ser vicing to quali ed service personnel under the following
conditions:
When the power-supply cord or
plug is damaged.
If liquid has been spilled, or objects
have fallen into the video product .
If the video product has been exposed to rain or water.
If the vide o product has been
dropped or the cabinet has been
damaged.
If the video product does not operate normally be following the
operating instruc tions. Adjust only
those controls that are covered by
the operating instruc tions as an im proper adjustment of other controls
may result in damage and will often
require ex tensive work by a quali e d
technician to re store the video prod uct to its normal operation.
When the video product exhibits a
distinct change in performance - this
indicates a need for service.
Replacement Parts: When replacement part s are required, b e sure
the service technician has used
replacement parts speci ed by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may
result in re, electric shock or other
hazards.
Safety Check: Upon completion of any
service or repairs to this video product, ask the service technician to
perform safety checks to determine
that the video product is in proper
operating condition.
iii
For Your Safety
WARNING
WARNING
Be sure to read this notes before using
Safety Notes
• Make sure that y ou use your camera cor rectly. Read these S afety Notes and
your Owner’s Manual carefully before use.
• After reading these Safet y Notes, store them in a safe place.
About th e Icons
The icons sho wn below are used in th is document to indicate th e severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the produc t is used incorrectly as a result.
This icon indicates that death or serious injury can result if the information is ignored.
WARNING
This icon indicates that personal injury or material damage can result
if the information is ignored.
CAUTION
The icons shown below are used to indicate the nature of the information
which is to be obs erved.
Triangular icons tell you that this information requires attention (“important”).
Circular icon s with a diagonal bar tell yo u that the ac tion indicated is
prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an action that must be
performed (“Required”).
WARNIN G
If a prob lem arises, t urn the camer a o , re move the batte ry, disconne ct and
unplu g the AC power ad apter.
Continued use of the camera when it is emitting smoke, is emitting
Unplug
any unusual odor, or is in any other abnormal state can cause a re
from power
or electric shock.
socket.
• Contact your FUJIFILM dealer.
WARNIN G
Do not al low water or f oreign o bjects t o enter the c amera.
If water or fore ign objects get inside the camera, tur n the camer a
o , remove the battery a nd disconnect and un plug the AC po wer
adapter.
Continued us e of the camera can caus e a re or e lectric shock .
• Contact yo ur FUJIFILM dealer.
Do not us e the camer a in the bat hroom or sh ower.
Do not use in
This can ca use a re o r electric shoc k.
the bathroom
or shower.
Never at tempt to di sassem ble or mod ify (never o pen the ca se).
Failure to obser ve this precautio n can cause re or elec tric shock.
Do not disas-
semble
Shoul d the cas e brea k open as t he res ult of a fa ll or oth er accident , do not
touch t he expose d parts.
Failure to observe this precaution could result in electric shock or in
Do not touch
injury f rom touchin g the damaged part s. Remov e the battery im-
internal
mediately, taking care to avoid injury or electric shock, and take the
parts
produc t to the point of purchase fo r consultation.
Do not ch ange, he at or und uly twist or p ull the c onnection cord an d do not
place h eavy obje cts on th e connec tion cord .
These ac tions could damage th e cord and caus e a re or elec tric
shock.
• If the cord is dam aged, contact your FUJI FILM dealer.
Do not pl ace the cam era on an un stable s urface.
This can ca use the camera to fall o r tip over and cause injur y.
Never at tempt to ta ke pictu res whil e in motion .
Do not use th e camera while you a re walking or dri ving a vehicle. Thi s
can result in y ou falling down or be ing involved in a tra c accident.
Do not tou ch any meta l parts o f the came ra during a t hunder storm.
This can cause an elec tric sho ck due to induced current f rom the
lightning discharge.
Do not us e the batte ry excep t as speci ed.
Load the bat tery as aligned w ith the indicator.
iv
For Your Safety
WARNING
CAUTION
CAUTION
WARNIN G
Do not heat, change or take apar t the battery. Do not drop or subjec t the battery to i mpacts. D o not store the b attery wit h metallic p roducts. D o not use
charg ers othe r than the sp eci ed mode l to charge t he batte ry.
Any of these a ctions can cause th e battery to burst o r leak and cause
re or injur y as a result.
Use onl y the batter y or AC power adap ters speci ed for use wi th this came ra.
Do not us e voltage s other tha n the power s upply vol tage sho wn.
The use of ot her power sources can c ause a r e.
If the ba ttery leak s and uid g ets in contac t with your ey es, skin or cl othing.
Flush the a ecte d area with c lean water a nd seek me dical att ention or c all an
emergency number right away.
Do not us e the charg er to char ge batter ies othe r than thos e speci ed her e.
The Ni- MH batter y charger is designe d for FUJIFILM HR-AA Ni-MH
batteries. Using the charger to charge conventional batteries or other
types of rechargeable bat teries can cause the b atter y to leak uid,
overheat or burst.
When ca rrying th e battery, i nstall it in a d igital cam era or keep it i n the hard
case. Wh en storing th e batte ry, kee p it in the h ard ca se. When d isca rdin g,
cover the battery terminals with insulation tape.
Contact with other metallic objects or batter y could caus e the battery to igni te or burst.
Keep Mem ory Car ds out of the r each of sm all child ren.
Becaus e Memory Cards are sma ll, they can be swall owed by children.
Be sure to store M emory C ards out of th e reach of smal l children. I f
a child swallows a Memory Card, s eek medi cal attention or call an
emergency number.
Do not use this camera in locations a ected by oil fumes, steam, humidity or
dust.
This can ca use a re o r electric shoc k.
Do not le ave this ca mera in pla ces subj ect to ext remely h igh tempe rature s.
Do not leave the camera in locations such as a sealed vehicle or in
direct su nlight. This can cause a re.
Keep out o f the reac h of small ch ildren .
This produ ct could cause injur y in the hands of a child .
CAUTION
CAUTION
Do not pl ace heavy o bject s on the came ra.
This can cau se the heavy objec t to tip over or fall and cau se injury.
Do not mov e the camer a while the AC p ower adapte r is still co nnecte d. Do not
pull on t he connec tion cor d to discon nect the AC p ower adap ter.
This can dam age the power cord or cab les and cause a re or el ectric
shock.
Do not us e the AC power ad apter when t he plug is da maged or the p lug socke t
connection is loose.
This could c ause a r e or electric sho ck.
Do not cov er or wrap th e camera o r the AC power ad apter in a c loth or bla nket.
This can ca use heat to build up and disto rt the casing or cau se a re.
When you a re cle aning t he cam era or yo u do not pl an to use t he cam era for
an exte nded period, remove t he battery an d disc onnec t and un plug the AC
power adapter.
Failure to do so can c ause a re or electric sho ck.
When ch arging e nds, unpl ug the char ger from t he power so cket.
Leaving the ch arger plugged into the p ower socket can caus e a re.
Using a ash to o close to a pe rson’s eye s may tempo rarily a ect the eyesig ht.
Take particul ar care when p hotograp hing infa nts and youn g children.
When a memory card is removed, the card could come out of the slot too quickly. Use you r ng er to hold it a nd gently r elease t he card.
Reque st regula r intern al testin g and clean ing for you r camera .
Build- up of dust in your camer a can cause a re or elec tric shock.
• Contact yo ur FUJIFILM deal er to reques t internal cleaning ever y 2
years.
• Please note thi s is not a free of charge ser vice.
v
For Your Safety
Power Supp ly and Batter y
* Confir m your bat tery ty pe before r ead-
ing the foll owing descriptio ns.
The following explains proper use of
batteries and how to prolong their
life. Incorrect use of batteries can
cause shorter battery life, as well as
leakage, e xcessive heat, re or exp losion.
Camera uses the Rechargeable
1
Lithium-ion Ba
* When shippe d, the bat tery is not
fully charged. Always charge the
batter y before using it.
* When c arrying the bat tery, install it
in a digital camera or keep it in the
soft case.
■ Battery Features
• The bat tery gradually loses its
charge even when not used. Use
a batter y that has been charged
recently (in the last day or two) to
take pictures.
• To ma ximize the life of the bat tery,
turn the camera o as quickly as
possible when it is not being used.
• Th e number of availabl e frames will
be lower in col d locations or at low
temperatures. Take along a spare
fully charged batter y. You can also
increase the amount of power produced by put ting the battery in
your pocke t or another warm place
to heat it and then loading it into
the camera just before you take a
picture.
ttery
vi
If you are using a heating pad, take
care not to place the batter y directly against the pad. The camera
may not operate if you use a depleted bat tery in cold conditions.
■ Ch arging t he Batter y
• You can charge the batter y using
the battery charger (included).
- The battery can be charged
at ambient temperatures between 0°C and +40°C (+32°F
and +104°F). Refer to the Owner’s Manual for the time of charging
battery.
- You should charge the bat tery
at an ambient temperature between +10°C and +35°C (+50°F
and +95°F). If you charge the
batter y at a temperature outside
this range, charging takes longer
because the performance of the
batter y is impaired.
- You cannot charge the battery
at temperatures of 0°C (+32°F) or
below.
• The Rechargeable Lithium- ion Battery does not need to b e fully discharged or exhausted at before
being charged.
• The bat tery may fe el warm af ter it
has been charged or immediately
after being used. This is perfectly
normal.
• Do not recharge a fully charged
battery.
■ Battery Life
At normal temperatures, the battery can be used at least 300 times.
If the time for which the battery
provides power shortens markedly,
this indicates that the battery has
reached the end of its e ective life
and should be replaced.
■ Notes on storage
• If a batter y is stored for lo ng periods
while charged, the performance of
the battery can be impaired. If the
batter y will not be used for some
time, run the battery out before
storing it .
• If you do not intend to use the
camera for a long period of time,
remove the bat tery from the camera.
• Store the batter y in a cool place.
- The battery should be stored in
a dry location with an ambient
temperature b etween +15°C and
+25°C (+59°F and +77°F).
- Do not leave the batter y in hot or
extremely cold places.
■ Ha ndling th e Batter y
Cauti ons for Your Sa fety:
• Do not carr y or store bat tery with
metal obje cts such as necklaces or
hairpins.
• Do not heat the batter y or throw it
into a re.
• Do not attempt to take ap art or
change the battery.
• Do not recharge the bat tery with
chargers other those speci ed.
• Dispose of used batter y promptly.
• Do not drop the bat tery or otherwise subject it to strong impacts.
• Do not expose the battery to water.
• Always keep the batter y terminals
clean.
• D o not store batteries in hot places. Also, if you use the bat tery for
a long period, the camera body
and the battery itself will become
warm. This is normal. Use the AC
power adapter if you are taking
pictures or viewing images for a
long period of time.
Camera uses AA-size alkaline or Ni-MH
2
(nick
el-metal hydride) rechargeable
batteries
* For details on the batteries that
you can use, refer to the Owner’s Manual of your camera.
■ C autions fo r Using Bat tery
• Do not heat the batteries or throw
them into a re.
• Do not carr y or store batteries with
metal obje cts such as necklaces or
hairpins.
• Do not expose the batteries to water, and keep batteries from getting
wet or stored in moist locations.
• Do not attempt to take apart or
change the batteries, including
battery casings.
• Do not subject the batter ies to
strong impacts.
• D o not use bat teries that are leaking, deformed, discolored.
For Your Safety
CAUTION
• Do not store batteries in warm or
humid places .
• Keep the batteries out of reach of
babies and small children.
• Make sure that the battery polarit y
(C and D) is correct.
• D o not use new wi th used bat teries. Do not use charged and discharged bat teries together.
• Do not use di erent types or
brands of batteries at the same
time.
• If you do not intend to use the
camera for a long period of time,
remove the bat teries from the
camera. Note if the camera is left
with the bat teries removed, the
time and date set tings are cleared.
• The batteries feel warm right after being used. Before removing
the batteries, turn the camera o
and wait for the batteries to cool
down.
• Since batteries do not work well in
cold weather or locations, warm
the batteries by placing them inside your garments before use.
Batteries do not work well when
cold. They will work again when
the temperat ure returns to normal.
• Soil (such as ngerprints) on the
batter y terminals makes the batteries charge less reducing the
number of images. Carefully wipe
the battery terminals with a sof t
dry cloth before loading.
If any liquid at all leaks from
the batteries, wip e the battery
compartment thoroughly and
then load new batteries.
If any battery uid comes into
contact with your hands or
clothing, ush the area thoroughly with water. Note that
batter y uid can cause loss
of eyesight if it gets into your
eyes. If this occurs, do not r ub
your eyes. Flush the uid out
with clean water and contac t
your physician for treatment.
■ Us ing the AA- size Ni-MH b atteries
correctly
• Ni- MH batteries lef t unused in
storage for long periods can become “deactivated”. Also, repeatedly charging Ni-MH batteries
that are only par tially discharged
can cause them to su er from the
“memory e ect”. Ni-MH batteries
that are “deactivated” or a ected
by “memory” su er from the problem of only providing power for a
short time after b eing charge d. To
prevent this problem, discharge
and recharge them several times
using the camera’s “Discharging
rechargeable batteries” function.
Deactivation and memory are spe-
ci c to Ni- MH batteries and are not
in fact battery faults.
See Owner’s Manual for the proce-
dure for “Discharging rechargeable
batteries”.
CAUTION
Do not use the “Discharging rechargeable batteries” function when
alkaline batteries being used.
• To charge Ni-MH batteries, use the
quick battery charger (sold separately). Refer to the instructions
supplied with the charger to make
sure that the charger is used correctly.
• Do not use the battery charger to
charge other batteries.
• Note that the batteries feel warm
after being charged.
• Due to the w ay the camera is construc ted, a small amount of current
is used even when the camera is
turned o . Note in particular that
leaving Ni- MH batteries in the
camera for a long period will overdischarge the batteries and may
render them unusable even after
recharging.
• Ni-MH bat teries will self-discharge
even when not us ed, and the time
for which the y can be used may be
shortened as a result.
• Ni-MH batteries will deteriorate
rapidly if over-discharged (e.g.
by discharging the batteries in a
ashlight). Use the “Discharg ing rechargeable batteries” function provided in the camera to discharge
the batteries.
• Ni-MH bat teries have a limited
service life. If a bat tery can only
be used for a short time even after
repeated discharge-charge cycles,
it may have reached the end of its
service life.
■ Disposing of Batteries
• When disposing of batteries, do
so in accordance with your local
waste disposal regulations.
Notes on both models (1, 2)
3
■
AC Power Ada pter
Always use the AC Power Adapter
with the cam era. The use of an AC
Power adapter other than FUJIFILM
AC Power Adapter can be damage d
to your digital camera.
For details on the AC power adapter,
refer to the Owner’s Manual of your
camera.
• Use the AC power adapter for indoor use only.
• Plug the connection cord plug securely into the DC input terminal.
• Turn o the FUJIFILM Digital camera before disconnec ting the cord
from the DC input terminal. To disconnect , pull out the plug gently.
Do not pull on the cord.
• Do not use the AC power adapter
with any device other than your
camera.
• During use, the AC power adapter
will become hot to the touch. This
is normal.
vii
For Your Safety
• Do not take apar t the AC power
adapter. Doing so could be dangerous.
• Do not use the AC power adapter
in a hot and humid place.
• Do not subject the AC power
adapter to strong shock s.
• The AC power adapter may emit a
humming. This is normal.
• If used near a radio, the AC power
adapter may cause static. If this
happens, move the camera away
from the radio.
Befor e Using the Came ra
Do not aim the camera at ex tremely
bright light sources, such as the sun
in a cloudless sky. Failure to observe
this precaution could damage the
camera image sensor.
■ Tes t Shots Prio r to Photogr aphy
For important photographs (such as
weddings and overseas trips), always
take a test shot and view the image to make sure that the camera is
working normally.
• FUJIFILM Corporation cannot accept liabilit y for any incidental
losses (such as t he costs of photog raphy or the loss of income from
photography) incurred as a result
of faults with this product.
■ Notes on Copyri ght
Images recorded using your digital
camera system cannot be used in
ways that infringe copyright laws
without the consent of the owner,
viii
unless intended only for personal
use. Note that some restric tions apply to the photographing of stage
performances, entertainments and
exhibits, even when intended purely
for perso nal use. Users are also asked
to note that the transfer of Memory
Card containing images or data protected under copyright laws is only
permissible within the restrictions
imposed by those copyright laws.
■ Ha ndling You r Digital C amera
To ensure that images are recorde d
correctly, do not subjec t the camera
to impact or shock while an image is
being recorded.
■ Liquid Crystal
If the LCD monitor is damaged, take
particular care with the liquid crystal
in the monito r. If any of the following situations arise, take the urgent
action indicated.
• If liquid crystal comes in contact
with your skin:
Wipe the area with a cloth and
then wash thoroughly with soap
and running water.
• If liquid crystal gets into your eye:
Flush the a ected eye with clean
water for at least 15 minutes and
then seek medical assistance.
• If liquid crys tal is swallowed:
Flush your mouth thoroughly with
water. Drink large quantities of water and induce vo miting. Then see k
medical assistance.
■ Tradema rk Informat ion
• E and xD-Picture Card™ are
trademarks of FUJIFILM Corporation.
• IBM PC /AT is a reg istered trademark
of International Business Machines
Corp. of the U.S.A.
• Macintosh, Qui ckTime, and Mac OS
are trademarks of Apple Inc. in the
U.S.A . and other countries.
• Windows 7, Windows Vista and the
Windows logo are trademarks of
the Microso ft group of companies .
• IrSimple™ Trademark is owned by
the Infrare d Data Association®.
• IrSS™ Trademark or IrSimpleShot™
Trademark is owned by the Infrared Data Association®.
• SDHC logo is a trademark.
• HDMI logo is a trademark.
• YouTube is a trademark of Google
Inc.
• Other company or product names
are trademarks or registered trademarks of the respective companies.
■ Notes on Electrical Interference
If the camera is to be used in hospitals or aircrafts, please note that
this camera may cause interference
to other equipment in the hospital
or aircraf t. For details, please che ck
with the applicable regulations.
■ Explanation of Color Television
System
NTSC: National Television System
Committee, color television
telecasting speci cations
adopted mainly in the U.S .A.,
Canada and Japan.
PAL: Phase Alternation by Line, a
color television sys tem adopted mainly by European
countries an d China.
■ E xif Print (E xif ver. 2.3)
Exif Print For mat is a newly revised
digital camera le format that contains a variety of sho oting information for optimal printing.
IMPORTANT NOTIC E: Read Before
Using th e Softwar e
Direct or indirec t export, in whole or
in part, of licensed software without
the permission of the applicable
governing bodies is prohibited.
Before using the camera, read this manual and the warnings on pages ii–viii. For information on speci c topics, consult the sources below.
Camera Q & A
Know what you want to do but don’t know the
name for it? Find the answer in “Camera Q & A.”
Troubleshooting
Having a speci c problem with the camera?
Find the answer here.
Glossary
The meanings of some technical terms may be
found here.
Memory Cards
Pictures can be stored on optional SD or SDHC memory cards. In this manual, SD memory cards are referred to
as “memory cards.” For more information, see page 10.
The “Table of Contents” gives an overview of the
entire manual. The principal camera operations
are listed here.
Warning Messages a nd Displays
Find out what’s behind that ashing icon or error
message in the display.
Restrictions on Came ra Settings
See the Basic Manual for restrictions on the op-
tions available in each shooting mode.
.............................................
......................
..............
Basic Manual
pg. xiii
pg. 113
ix
Camera Q & A
Camera Setup
Question
Key phrase
See page
Sharing Pictures
Question
Key phrase
See page
Find items by task.
Camera Setup
Question
How do I set the camera clock?Date and time14
Can I set the clock to local time when I travel?Time di erence98
How do I keep the display from turning o automatically?Auto power o 101
How do I make the display brighter or darker?LCD brightness101
How do I stop the camera beeping and clicking?
Can I change the sound the shutter makes?Shutter sound96
What do the icons in the display mean?Displays4
How much charge is left in the battery?Battery level16
Can I increase the capacity of rechargeable Ni-MH batteries?Discharge102
Sharing Pictures
Question
Can I print pictures on my home printer?Printing pictures60
Operation and shutter volume96
Key phrase
Silent mode18
Key phrase
See page
See page
x
Camera Q & A
Taking Pictures
Question
Key phrase
See page
Tak ing Pictures
Question
How can I avoid blurred pictures?Dual IS mode17
How can I make good portraits?Intelligent Face Detection31
Can the camera automatically adjust settings for di erent scenes?
Can I choose my own settings for di erent scenes?Scene position21
How can I be sure my subject is smiling when I take a photograph?Smile detection22
How can I be sure that nobody blinked when the photo was taken?Blink detection32
How do I shoot close-ups?Macro mode (close-ups)35
How do I keep the ash from ring?
How do I “ ll-in” shadows on back-lit subjects?
How do I take a series of pictures in a single burst?Continuous Shooting mode38
How do I take a group portrait that includes the photographer?Self-timer mode77
How do I shoot a panorama?Motion panorama24
Can I choose shutter speed and aperture?P, S, A, and M modes26
Can I save and recall camera settings?C mode30
How do I adjust exposure?Exposure compensation43
How do I keep a moving subject in focus?Tracking81
How do I shoot movies?Recording movies55
How do I frame pictures in the view nder?EVF/LCD button5
Key phrase
M mode
Flash mode36How do I stop my subjects’ eyes glowing red when I use the ash?
See page
15
xi
Camera Q & A
Viewing Pictures
Question
Key phrase
See page
Viewing Pictures
Question
Key phrase
See page
How do I view my pictures?Single-frame playback44
How can I delete pictures easily?
How can I select and delete individual pictures or delete all pictures
at once?
The b button
Deleting pictures52
Can I zoom in on pictures during playback?Playback zoom45
Can I mark images with favorite (I) rating?I Favori tes
How do I view a lot of pictures at once?Multi-frame playback47
Can I create photobooks from my favorite pictures?Photobook assist49
How do I nd pictures?Image search51
Can I protect my pictures from accidental deletion?Protect89
Can I hide the icons in the display when viewing my pictures?Choosing a display format44
TM
Can I select pictures for upload to YouTube
Can I select pictures for upload to Facebook?
?
Uploading pictures86
20
45
xii
Before You Begi
First Step
Basic Photography and Playback
More on Photography
Table of Contents
For Your Safety ................................................................................. ii
IMPORTANT SAFETY INSTRUCTIONS ......................................ii
The following symbols are used in this manual:
3 Caution: This information should be read before use to ensure correct operation.1 Note: Points to note when using the camera.2 Tip: Additional information that may be helpful when using the camera.
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simpli ed for explanatory purposes.
Supplied Accessories
The following items are included with the camera:
AA alkaline (LR6) batteries (×4)USB-A/V cableStrap
• Basic Manual
Lens capCD-ROM
Before You Begin
1
Parts of the Camera
Parts of the Camera
For more information, refer to the page listed to the right of each item.
b (dele te) button (pg. 20)
m (monitor brightness) button (see below)
Move cursor left
F (macr o) button (pg. 35)
Move cursor down
c (instant z oom) button (pg. 40)
MENU/OK button (pg. 14)
Move curs or right
N ( ash) button (pg. 36)
2 Tip: Monitor Brightness
Pressing the m button brie y increases monitor brightness, making the display easier to see in bright light. Normal brightness is restored when a photograph is taken.
Before You Begin
3
Introduction
Camera Displays
■■ Shooting
19
12/31/2050
N
■■ Playback
10:00
AM
100-0001
12/31/2050
N
1/250
F3.1
Camera Displays
The following indicators may appear during shooting and playback. The indicators displayed vary with
camera settings.
The electronic view nder provides the same information as the monitor, and can be used when bright lighting conditions make the display in the monitor di cult to see. To switch between the monitor and electronic
view nder, press the EVF/LCD button (your selection remains in e ec t when the camera is tur ned o or the mode
dial is rotated to another setting).
EVF
LCD
Before You Begin
5
The Mode Dial
The Mode Dial
To select a shooting mode, align the mode icon with the mark next to the
mode dial.
Introduction
B (AUTO): A simple “point-and-shoot”
mode recommended for rst-time users
of digital cameras (pg. 21).
M (SCENE RECOGNITION): A “pointand-shoot” mode in which the camera
automatically adjusts settings to suit the
scene (pg. 15).
SP (SCENE POSITION): Choose a scene suit-
ed to the subject or shooting conditions
and let the camera do the rest (pg. 21).
6
P, S, A, M: Select for full control over camera settings, includin g aperture (M and A)
and/or shutter speed (M and S) (pg. 26).
C(C USTOM) : Recall stored settings for
modes P, S, A, and M (pg. 30).
F (MOVIE): Record movies with sound
(pg. 55).
N (MOTION PANORAM A): Take a series of
photographs and combine them to form
a panorama (pg. 24).
The Strap and Lens Cap
Attaching the Strap
The Lens Cap
Attaching the Strap
Attach the strap to the two strap eyelets as shown
below.
3 Caution
To avoid dropping the camera, be sure the strap is correctly secured.
The Lens Cap
Attach the lens cap as shown.
To avoid losing the lens cap, pass the supplied
string through the eyelet (q) and secure the lens
cap to the strap (w).
First Steps
7
Inserting the Batteries
Battery casing
Battery casing
The camera takes four AA alkaline, lithium, or rechargeable Ni-MH batteries. A set of four alkaline batteries is supplied with the camera. Insert the batteries in the camera as described below.
Open the battery-chamber cover.
1
Slide the battery-chamber latch in the direction
shown and open the battery-chamber cover.
1 Note
Be sure the camera is o before opening the battery-chamber cover.
3 Cautions
• Do not open the battery-chamber cover when
the camera is on. Failure to observe this precaution could result in damage to image les or
memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
8
Insert the batteries.
2
Insert the batteries in the
orientation shown by the
“+“ and “–“ marks inside
the battery chamber.
3 Cautions
• Insert the batteries in the correct orientation.
• Never use batteries with peel-
ing or damaged casing or mix
old and new batteries, batteries with di erent charge levels,
or batteries of di erent types.
Failure to observe these
precautions could result
in the batteries leaking or
overheating.
• Neve r use manganese or Ni- Cd batteries.
• The capacity of alkaline batteries varies with the
manufacturer and drops at temperatures below
10 °C/50 °F; Ni-MH batteries are recommended.
• Fingerprints and other soil on the battery terminals can shorten battery life.
Battery casing
Battery casing
Inserting the Batteries
Close the battery-chamber cover.
3
Close the battery-chamber cover and slide it in
until the latch clicks into
place.
3 Caution
Do not use force. If the battery-chamber cover
does not close, check that the batteries are in the
correct orientation and try again.
2 Tip: Using an AC Power Adapter
The camera can be powered by an optional AC
power adapter and DC coupler (sold separately).
Choosing the Batter y Type
After replacing the batteries
with batteries of a di erent type,
select the battery type using
the T BATTERY TYPE option
SET-UP
GUIDANCE DISPLAY
VIDEO SYSTEM
CUSTOM RESET
BATTERY TYPE
DISCHARGE
LITHIUM
ALKALINE
NI-MH
5
in the setup menu (pg. 97) to
ensure that the battery level is
displayed correctly and the camera does not turn o
unexpectedly.
/5
First Steps
9
Inserting a Memory Card
■■ Compatible Memory Cards
Write-protect
switch
The camera can store pictures on SD memory cards (sold separately) .
Compatible Memory Cards
SanDisk SD and SDHC memory cards have been approved for use in the camera. A complete list
of approved memory cards is available at http://www.fujifilm.com/products/digital_cameras/index.html.
Operation is not guaranteed with other cards. The camera can not be used with xD-Picture Cards or
MultiMediaCard (MMC) devices.
3 Caution
Memory cards can be locked, making it impossible to format the card or to record or delete
images. Before inserting a memory card, slide the write-protect switch to the unlocked position.
Write -prote ct
switch
10
■■ Inserting a Memory Card
Inserting a Memory Card
Open the battery-chamber cover.
1
1 Note
Be sure the camera is o
before opening the batterychamber cover.
Insert the memory card.
2
Holding the memory card in the orientation
shown below, slide it in until it clicks into
place at the back of the slot.
Be sure card is in correc t orientation; do not insert at an angle or
use force.
Click
Inserting a Memory Card
Close the battery-chamber cover.
3
Close the battery-chamber cover and slide it in
until the latch clicks into
place.
Removing Memory Cards
After con rming that the camera
is o , press the card in and then
release it slowly. The card can
now be removed by hand.
3 Cautions
• The memory card may spring out if you remove
your nger immediately after pushing the card in.
• Memory cards may be warm to the touch after being removed from the camera. This is normal and
does not indicate a malfunction.
First Steps
11
Inserting a Memory Card
3 Cautions
• Do not turn the camera o or remove the memory card while the memory card is being formatted or data are being recorded to or
deleted fro m the card. Failure to observe this precaution could damage the card.
• Format memory cards before rst use, and be sure to reformat all memory cards after using them in a computer
or other device. For more information on formatting memory cards, see page 99.
• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD card may not eject
normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly
remove the card.
• Do not a x labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of memory card. Use a card with a class 4 write speed
(4 MB/s) or better when shooting HD movies.
• Formatting a memory card in the camera creates a folder in which pictures are stored. Do not rename or delete
this folder or use a computer or other device to edit, delete, or rename image les. Always use the camera to
delete pictures from memory cards; before editing or renaming les, copy them to a computer and edit or rename the copies, not the originals.
12
Turning the Camera on and O
Shooting Mode
Playback Mode
MM
Shooting Mode
Slide the G switch in the direction shown
below. The lens will extend automatically.
Slide the G switch to turn the camera o .
2 Tip: Switching to Playback Mode
Press the a button to start playback. Press the shutter
button halfway to return to shooting mode.
3 Cautions
• Forcibly preventing the lens from extending could
cause damage or product malfunction.
• Pictures can be a ected by ngerprints and other
marks on the lens. Keep the lens clean.
• The G button does not completely disconnect
the camera from its power supply.
2 Tip: Auto Power O
The camera will turn o automatically if no operations are performed for the length of time selected in the
AUTO POWER OFF menu (see page 101). To turn the camera on, use the G switch or press the a
button for about a second.
Playback Mode
To turn the camera on and begin playback, press
the a button for about a second.
Press the a button again or slide the G
switch to turn the camera o .
2 Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the a button to return to playback.
First Steps
13
Basic Setup
A language-selection dialog is displayed the rst time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 96).
Choose a language.
1
START MENU
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
PORTUGUÊS
SETNO
Set the date and time.
2
DATE / TIME NOT SET
2013
2012
YY. MM. DD
2011
2010
2009
SETNO
1. 1 12 : 00
2 Tip: The Camera Clock
If the batteries are removed for an extended period, the camera clock and battery type will be reset and the language-selection dialog will be displayed when the camera is turned on. If the batteries are left in the camera for
about 10 hours, the battery can be removed for about 24 hours without resetting the clock, language, or battery
type.
1.1 Press the selector up or down to highlight a language.
1.2 Press MENU/OK.
2.1 Press the selector left or right to highlight the year, month, day,
hour, or minute and press up or down to change. To change
AM
the order in which the year, month, and day are displayed, highlight the date format and press the selector up or down.
2.2 Press MENU/OK. A battery type message will be displayed; if the
type di ers from the type inserted in the camera, use the setup
menu
TBATTERY TYPE option (pg. 97)
to specify the correct
type.
14
Loading...
+ 114 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.