FujiFilm 100, 90, Zoom Date 1000 Owner's Manual
OWNER’S MANUAL
2
FEATURES ............................................................................... 2
PART NAMES ........................................................................... 3
QUICK START GUIDE ............................................................. 6
Menus and modes ..................................................................9
Finder .................................................................................... 11
AF Lamp................................................................................12
1. PRELIMINARY STEPS
ATTACHING THE STRAP ...................................................... 14
LOADING THE BATTERY ...................................................... 15
TURNING ON YOUR CAMERA .............................................16
CHECKING YOUR BATTERY ................................................ 17
SETTING THE DATE (YEAR-MONTH-DAY/HOUR-MINUTE) ..
18
SELECTING THE DATE MODE.............................................21
2. USING YOUR CAMERA
LOADING THE CAMERA .......................................................23
USING YOUR CAMERA ......................................................... 27
USING THE AUTO-FOCUS LOCK ........................................ 33
UNLOADING THE FILM OR REMOVING FILM
IN MID-ROLL...........................................................................35
3. ADVANCED TECHNIQUES
SELECTING THE FLASH MODE...........................................39
SELECTING THE SELF-TIMER MODE.................................46
SELECTING THE REMOTE CONTROLLER MODE.............49
SELECTING THE FOCUS MODE..........................................53
MULTI PROGRAM FLASH ..................................................... 57
TROUBLE SHOOTING ........................................................... 59
COMMON SENSE CAMERA CARE ...................................... 61
SPECIFICATIONS ..................................................................62
IMPORTANT SAFETY NOTICE ............................................. 64
FEATURES
• Super EBC Fujinon 28-100mm Auto Focus Zoom Lens
• Large LCD Panel with Back Light
• Multi-Programmed Flash
• Aluminum Body
• Self-Timer and Remote Controller
• Red-Eye Reduction
• Date/Time Imprinting
CONTENTS
The “CE” mark certifies that this product satisfies the
requirements of the EU (European Union) regarding
safety, public health, environment and consumer
protection.(“CE” is the abbreviation of Conformité
Européenne.)
This product is in conformity with Directive 89/336/EEC.
3
2(→p.51)
1 AF (Autofocus) Window
2 Remote Controller
Sensor
3 Shutter Release Button
4 Battery Compartment
Cover
5 Strap Lug
6 Battery cover release
knob
7 Self-Timer/Remote
Controller Lamp
8 Flash
9 Viewfinder Windo w
0 AE Light Sensor
A Super EBC Fujinon Lens/
Lens Cover
1
3(→p.30)
4(→p.15)
5(→p.14)
6(→p.15)
8(→p.39)
9
0
A(→p.16)
7(→p.48,51)
PART NAMES
4
B AF Lamp (green)
C Viewfinder Eye-piece
D Film Leader Mark
E Film Take-up Spool
F Mid-Roll Rewind Button
G Film Confirmation
Window
H Camera Back
I Film Pressure Plate
J Tripod Socket
F(→p.37)
E(→p.25)
D(→p.25)
H(→p .24,36)
I
J
G(→p.24)
C(→p.11)
B(→p.12)
5
K AF Lamp (green)
L Viewfinder Eye-piece
M Camera Back Lock
N Liquid Crystal Display
O Battery Status
P Power Button
Q Zoom Button
R Film Confirmation
Window
S MENU/SET Button
T Four-direction Button
U Exposure Counter
N(→p.9)
M(→p.24,36)
L(→p.11)
K(→p.12)
O(→p.17)
P(→p.16)
Q(→p.29)
S(→p.8)
T(→p.8)
R(→p.24)
U(→p.26)
6
1
2
QUICK START GUIDE
An easy introduction to automatic photography with your FUJIFILM camera.
Press the power button to turn the power on.
☞
, and are displayed on the LCD and the camera is set for automatic mode
photography.
Adjust the zoom.
7
3
4
Compose the picture.
Press the shutter button down completely.
Excellent pictures can be taken with just the operations described from page 27 on.
8
1
2
3
4
How to use the MENU/SET button and four-direction button
1 Selecting the menu and mode
2 Selecting the menu
☞
Make the menu you want to change blink/light.
3 Selecting the mode
☞
The current mode blinks.
4 Setting the mode
☞
The set mode is displayed.
∗
The LCD backlight is green (mode set) when the power is turned on and when a mode has
been set (goes out after 10 seconds).
The LCD backlight is orange (mode selection) while the mode is being selected (goes out after
10 seconds of no operation).
∗
When the LCD is difficult to read at night etc, press any of the , , or buttons to turn the
backlight (green) on.
9
■FLASH (→p.39)
1 Multi program flash mode
2 Red-eye reduction flash
mode
3 Back light compensation
flash mode
4 Flash-off mode
5 Night portrait (slow sync)
mode
D
Menus and modes
32
1
A
5
4
789
0
B
C
EF
G
H
■SELF-TIMER (→p.46,49)
6 Self-timer/Remote control
off mode (normal mode)
7 Self-timer mode (1 shot)
8 Self-timer mode
(2 continuous shots)
9 Self-timer mode
(3 continuous shots)
0 Remote control mode
6
10
■FOCUS (→p.53)
A AF (Auto focus) mode
B Landscape mode
C Macro mode
■DATE (→p.21)
D Year-Month-Day
E Month-Day-Year
F Day-Month-Year
G Day-Hour-Minute
H Nothing printed
∗
Examples shown are for 18:15
on the 26th November 2001.
D
32
1
6
A
5
4
789
0
B
C
EF
G
H
11
A : Framing area
Compose the image within this area.
B : AF (auto-focus) spot
Position this spot over the main subject in your picture.
C : Close-up Frame
When taking close-ups, use these marks as a guide when composing the picture.
(→p.31)
Finder
C
B
A
12
When the shutter button is pressed down halfway, the AF lamp (green) lights or
blinks.
AF Lamp
13
Meaning
Photography is possible. (Focus and exposure settings complete.)
Out of focal range.
Ensure that the subject is at least 0.65 m (0.65 m/2.1 ft. - ∞) from the camera.
∗
The shutter lock operates in the mode. Ensure that the subject is 0.5 - 1.0 m (1.6 - 3.3 ft.) from the camera
Out of focus.
• Ensure that the subject is within the AF frame.
• AF can not focus on the subject. Focus on an object of the same brightness and at the same distance as the subject you want to
photograph and use the AF lock.
∗
The shutter lock operates in the mode.
AF lamp status and meaning
∗
When the shutter button is pressed down halfway.
Status
Lit
Rapid blinking
Slow blinking
14
1. PRELIMINARY STEPS
A TT ACHING THE STRAP
Slip the thin cord on the carrying strap through the strap lug on the side of the
camera leaving a loop. Slide the thick par t of the strap through this loop and pull
tight. Take up any slack to make sure the strap is securely attached to the camera.
Do not use a strap made for cellular phones or similar electronic products. These straps are
usually too light or weak to hold your camera securely. For safety, use only straps designed for
cameras.
1
2
CHINESE
15
LOADING THE BA TTERY
Your camera uses one 3V lithium battery,
type CR2/DL CR2.
To load the battery.
1 Move the battery cover release knob.
2 Open the battery cover.
1
3
2
4
3 Insert the battery following instruction in the diagram on the inside of the battery
cover paying particular attention to the position of the , and . poles of the battery . The battery must be inserted the right wa y or the camer a will not function.
4 When the battery is inserted correctly, close the batter y compar tment cover by
pressing it until it snaps into place.
∗
Do not apply excessive force when opening or closing the battery cover.
∗
One fresh lithium battery should be sufficient for approximately 250 exposures (based on our
test conditions).
∗
When traveling, take extra batteries to provide power for extra exposures. This is particularly
important if you visit areas where fresh batteries may be difficult to obtain.
∗
Check the battery capacity symbol before using your camera. (→p.17)
∗
After changing the batteries, reset the date to assure accurate date/time recording. (→p.18)
16
TURNING ON YOUR CAMERA
Before you can use y our camera, you m ust turn the power on. First press the pow er
supply button which turns on the power. Pressing this button a second time will turn
the power off.
☞
When you turn your camera on, the lens cover will open and the initial display will appear in the
LCD.
☞
When the power is turned on, the camera is set for automatic mode photography. (→p.27)
∗
When you are finished using your camera, turn the power off to conserve your battery. If the
power supply is left on for more than 7 minutes without the camera being used, the camera will
automatically turn itself off.
Before you turn the camera on, make sure that the lens is not blocked to avoid any interference
with the lens extending into its picture taking position.
CHINESE
17
CHECKING Y OUR BA TTER Y
To deter mine the condition of the battery in your camera, turn the power on and
check the battery capacity indicator on the LCD panel.
1 Lit : Battery capacity is OK.
2 Lit : Battery capacity is low. Replace with a new battery.
3
Blinks
: Shutter cannot be released because battery is exhausted. Replace with
a fresh battery.
∗
Check the battery capacity before you start to use your camera.
∗
The battery can be replaced even while there is a partially-exposed film in the camera.
∗
When the battery is replaced immediately after loading a new film, the camera may not recognize that a film has been loaded. If this happens, open and close the camera back. (→p.59)
1
2
3
18
2 Press any of the buttons to the make the DATE menu blink.
☞
The year “ ” blinks and the date setting mode is entered.
1
SETTING THE DA TE
(YEAR-MONTH-DA Y/HOUR-MINUTE)
Setting the date
1 Turn the camera on and press the MENU/SET button.
☞
The LCD lights orange and the menu selection mode is entered.
2
3
4
3 Press the buttons to change the numbers which are blinking.
4 Press the buttons to change the item to be set.
☞
The selected item blinks.
CHINESE
19
5 When the date has been set, press the MENU/SET button.
☞
The LCD changes to green and the date which has been set is displayed.
☞
To set the time (hour or minute) by the radio, press in the MENU/SET button when the time
signal indicates zero.
∗
The year, month, and day will change together with the hour and minute.
5
● You can set:
Year : ’01 to ’31 (2001 to 2031)
Month : 1 to 12 Day : 1 to 31
Time : 0 to 23 hours; 00 to 59 minutes
20
Changing the date
1 Turn the camera on and press the MENU/SET button.
☞
The LCD lights orange and the menu selection mode is entered.
1
2
3
4
2 Press any of the buttons to make the DATE menu blink.
☞
The date section blinks.
3 Hold the MENU/SET button down for 2 seconds or longer.
☞
The “Day” blinks and the date change mode is entered.
4 Using the procedure described in steps 3 to 4 on page 18, set the date with the
buttons.
☞
When the date has been set, press the MENU/SET button.
Loading...