Fuji Film 02000002 User Manual
The Fn (Function) Buttons
The Fn (Function) Buttons
Using the Function Buttons
Using the Function Buttons
The roles played by each of the six function buttons can be selected by pressing and holding the button. The default options are shown below:
Fn1 button Fn2 button Fn3 button
Recording movies (P 44) Bright frame simulation (P 30)
Fn4 button Fn5 button Fn6 button
Film simulation (P 60) White balance (P 61) AF mode (P 66)
50
Metering (P 59)
Using the Function Buttons
Assigning Roles to the Function Buttons
Assigning Roles to the Function Buttons
To assign roles to the function buttons, press and hold the DISP/BACK button until the menu below is
displayed. Select buttons to choose their roles.
• PREVIEW DEPTH OF FIELD
• ISO AUTO SETTING
• SELF-TIMER
• IMAGE SIZE
• IMAGE QUALITY
• DYNAMIC RANGE
• FILM SIMULATION
R To disable the selected button, choose NONE.
R You can also display options for any of the function buttons by pressing and holding the button.
R The roles played by the six function buttons can also be selected using D BUTTON/DIAL SETTING> FUNC-
TION (Fn) SETTING (P 112).
• GRAIN EFFECT
• WHITE BALANCE
• PHOTOMETRY
• AF MODE
• FOCUS AREA
• FLASH MODE
• FLASH COMPENSATION
• SELECT CUSTOM SETTING
• MOVIE MODE
• FACE/EYE DETECTION SETTING
• RAW
• APERTURE SETTING
• WIRELESS COMMUNICATION
• SHUTTER TYPE
FUNCTION (Fn) SETTING
CANCELSET
• PREVIEW EXP./WB IN MANUAL MODE
• PREVIEW PIC. EFFECT
• BRIGHT FRAME SIMULATOR
• BRIGHT FRAME BRIGHTNESS
• NONE
The Fn (Function) Buttons
51
More on Photography and Playback
More on Photography and Playback
Drive Mode
Icon
Drive mode
P
B
STILL IMAGE
—
R
CONTINUOUS
53
O
AE BKT
54
W
ISO BKT
X
FILM SIMULATION BKT
H
WHITE BALANCE BKT
Y
DYNAMIC RANGE BKT
j
MULTIPLE EXPOSURE
56
Y
ADVANCED FILTER
55
Drive Mode
Use the DRIVE (e) button to choose the drive mode.
Press the DRIVE (e) button to display drive
1
mode options.
Press the selector up
2
or down to highlight a
AE BKT
drive mode.
Press the selector left or right to choose a set-
3
ting.
• Burst mode (CONTINUOUS): Choose the frameadvance rate.
• AE/ISO/WB BKT: Choose the bracketing increment.
• ADVANCED FILTER: Choose a lter e ect.
• Other modes: Proceed to Step 4.
Press MENU/OK.
4
Take pictures.
5
Icon
STILL IMAGE
B
CONTINUOUS
R
52
AE BKT
O
ISO BKT
W
FILM SIMULATION BKT
X
WHITE BALANCE BKT
H
DYNAMIC RANGE BKT
Y
MULTIPLE EXPOSURE
j
ADVANCED FILTER
Y
Drive mode
P
—
53
54
56
55
R In burst mode, pictures will be taken while the
shutter button is pressed. Shooting ends when
the button is released, the maximum number of
pictures has been taken, or the memory card is
full.
RR Burst Mode (CONTINUOUS)
Burst Mode (CONTINUOUS)
Focus and Exposure
Capture motion in a series of pictures.
R Frame rate varies with the subject, shutter speed, sensitivity, and focus mode and may slow as more shots are
taken.
R Depending on shooting conditions, the frame rate may drop or the ash may not re.
R Additional time may be required to record pictures when shooting ends.
R If le numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new
folder (P 115).
R Burst shooting may not begin if the space available on the memory card is insu cient.
Focus and Exposure
To vary focus and exposure with each shot, select focus mode C; in other modes, focus and exposure are determined by the rst shot in each series.
Q Selecting 8.0 fps in focus mode C restricts the choice of focus frames (P 70).
Q Exposure and focus tracking performance may vary with aperture, sensitivity, and shooting conditions.
Drive Mode
More on Photography and Playback
53
Loading...