FUJIAN NEWLAND COMMUNICATION SCIENCE TECHNOLOGY ME50N User Manual

ME50N User Manual

LTE Wireless Router

Thanks for choosing ME50N 4G wireless Terminal, please read and

keep the user manual carefully. It is more convenient for you to use our

router.

1、Main Technology Parameters

●Working temps : 0 ℃ -- +50℃

●Relative humidity: 5%--95%

●Working frequency : LTE: Band/4/7/66

●Power supply : input AC :100V~240V，50Hz~60Hz

Output DC: 12V, 1000mA

●Size: 175mm*155mm*75mm

●Weight: 250g

●Rate of uplink and downlink :LTE(Cat 4): DL150Mbps；

UL50Mbps

2、Product Manual

2.1 Product diagram

2.2 Product interface

(1) External ANT interface

(2) WLAN && WPS ON/OFF Switch

(3) SIM Card (4) Reset Button

(5) Phone Port (6) LAN Port

(7) Power Switch (8) DC Power

2.3 Indicator

Type Status Description

SIGNAL

WLAN

POWER

OFF
Yellow
Green
OFF
ON
Flicker

OFF
ON

not connected
Connected the internet, The signal is poor

Connected the internet, Signal is good
WIFI unopened
WIFI is opened and has data transmission

Press WPS key for 4 seconds, then release, the
WPS lights will be flashing. If device has been
connected, WPS light will be off. If device is
always not connected ,the light will just flashing
2min ,then to go out
Power abnormal, the router power off

Power normal, the router power on

3、Quickly Configuration Guide

The router support standard RJ45 cable or WLAN wireless way

to connect computer, Support Windows XP, Windows 7,Windows

8,MAC OS, Linux, Android and so on.

First Step：

(1) Take out the device, insert the SIM card according to the

instructions, and then use the matching power adapter to

supply power to the devices.

(2) Make the computer obtain IP address automatically, once the

computer get IP, input CPE IP address into the browser, press“enter”to

access CPE home page, click “login “in upper right corner to access

login page. You can get CPE default IP address、 username and

password from the nameplate attached at back cover.

Second step：

Go to the “Quick Settings”

(1) SSID configuration, the user can customize the SSID, easy to use

and memory.

(2) WiFi password settings, the user can customize the WiFi encryption

mode, and set their own password to prevent others from stealing the

traffic and to protect the security of the account.

(3) Preview the contents of the configuration, confirm is correct and

click on the “aplicar”.

4、Package Contents

1 x ME50N 4G wireless Terminal 1 x Power Adaptor

1 x LAN Port Cable (RJ45) 1 x ME50N User Manual

1 x External Antenna

5、Precautions

(1) When you remove and insert the SIM card, please ensure the

device without power.

(2) Do not use the equipment in case of lightning weather and

unplug the external antenna and power adapter.

(3) If the device working fine, you’d better not change the

parameter or other function, if you changed it and cannot access

Internet or have poor experience, please press and hold the reset

button for more than 7 seconds to restore the factory settings.

6、Common faults and treatment methods

Common faults Treatment methods

The device is powered on

but the front panel power

light is off.

Computer local connection

is not displayed, cannot

successfully PING IP

address of the device,

cannot open the WEB

page.

The device is working but

cannot access the internet

through the web

Change admin page login

password or SSID

password, but forget

password

Check the line connection is correct,

the outlet is energized, and the power

adapter is consistent with the

nameplate power supply.

Check if the computer's network card

is up and the computer has obtained

the IP address. The computer is best

set to automatically obtain IP (DHCP

need to open the device, the default is

open), if it is manually set, make sure

that the set IP address and the device

in the same network segment.

Set the computer to automatically

obtain the IP address and DNS server

address.

Long press the reset button for more

than 7 seconds to restore the factory

settings, and then from the rear body

nameplate for relevant information.

7、FCC Statement

Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate

the equipment.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference