Fugoo FSNA1 User Manual

Fugoo Bluetooth

Speaker

User
FSNA1

Manual

Contents

In

the

Box

2
Speaker
Charging 3

Power
Connecting

Audio

Speakerphone 4

Using

Customization

R

esetting
Updating your
Optional

Customer
Legal

parts 2

Checking
Charging your

3

Connecting
Pairing
Un-pairing a Bluetooth
Re-pair
Clearing all

playback 4
Adjusting
Playback

Ta k in g a
Voice Response
Adjusting

the

R

emote control buttons 5

R

eplacing

Changing
Turning voice
Change

R

emote control 6
Bike
Clip 6
Strap

notices 7

your battery

speaker 3

3

through

to

another Bluetooth

ing

to

a previously connected

pairings 4

the volume 4

4
call 4

mode 4

the volume 5

remote

the speaker 6

accessories 6

mount 6

6

support 7

control 5

the battery 5

5

jackets 5

prompts on / off 5

tones 5

software 6

level 3

an audio

device 4

cable 3

device 4

device 4

1 1/7/2014

In the box

• Fugoo Bluetooth Speaker

• Remote control (included with some models)

• AC wall charger

• Micro-USB charging cable

• 3.5 mm audio cable

• Accessory pouch

• Quick Setup Guide

• R

emote lanyard

• R

emote wrist strap

(included with some models)

(included with some models)

Fugoo Bluetooth Speaker controls

1

2

3.5 mm AUX input jack For playing music from the headphone

Micro-USB charging

connector / update port

Part

Description

For charging the Fugoo Bluetooth
Speaker, and for updating its software

output of another device

3

microphone For speakerphone function

4

volume down button ( - ) Lowers the volume

5

Action button Pause / Play and speakerphone control.

6

Volume up button ( + ) Raises the volume

7

Power button Turns the Fugoo Bluetooth Speaker On

8

Bluetooth button For pairing with other Bluetooth devices

9

LED indicator Indicates status of the Fugoo Bluetooth

Speaker

2 1/7/2014

Charging your Fugoo Bluetooth Speaker

Checking the battery level

• Press
charge of the battery.

• If voice prompts are enabled, the speaker responds with "Battery is almost full" or

*

another indication of how fully charged the battery is.

LED indicator voice

one blink Battery is full
two blinks Battery medium
three blinks Battery low
four blinks* Battery needs

The LED blinks amber when the battery reaches 5%.

the (Power) button

recharging

briefly. The LED blinks one to fou r times to indicate the

prompt

Charging your speaker

• Connect one end of the Micro-USB charging cable to the speaker and the other end
to a power outlet.

• The LED indicator blinks green during charging.

• The LED indicator glows steady green once the battery is fully charged.

battery level

100%

50%
25%

5%

- correct? red?

Turning on your speaker

•

Press and hold the (Power) button to turn the speaker on or off.

•

When
inactivity. To turn the speaker back on, press the
(volume up) button.

the speaker is running from battery power, it will turn off after 5 minutes of

(Action), – (volume down), or +

Connecting your speaker to smartphones and other devices

You can connect to your Fugoo Bluetooth Speaker either through its AUX input jack, or
through a Bluetooth wireless link. Only one of these inputs can be active at a time.

Connecting through an audio cable to the AUX input

• Connect one end of a 3.5 mm audio cable to your Fugoo Bluetooth Speaker's AUX
input jack, then connect the other end to headphones jack of your audio device.

• The LED glows blue and a voice may say, “Disconnected. Bluetooth off. Connected”

off

the

• Plugging an audio cable into the speaker's AUX input jack turns
wireless link

, to save power and

maximize

battery

life.

Bluetooth

3 1/7/2014