Fugoo COREX-6 User Manual

Fugoo Bluetooth

Speaker
User
CoreX

Manual

-6

Contents

In

the

Box
Spe aker
Charging 3

Power
Connecting

Audio

Speakerphone 4

Using

Custom ization

R

esetting
Updating your
Optional

Custom er
Lega l

parts 2

Checking
Charging your

Connecting
Pairing
Un-pairing a Bluetooth
Re-pair
Clearing all

playback 4
Adjusting
Playback

Taking a
Voice R esponse
Adjusting

the

R

emote control buttons 5

R

eplacing

Changing
Turning voice
Change

R

emote control 6
Bike
Clip 6
Strap

notices 7

your battery

speaker 3

through

to

another Bluetooth

ing

to

a previously connected

pairings 4

the volume 4

call 4

mode 4

the volume 5

remote

tones 5

the speaker 6

accessories 6

mount 6

support 7

control 5

the battery 5

jackets 5

prompts on / off 5

software 6

level 3

an audio

device 4

cable 3

device 4

device 4

2

3
3

4

5

6

1 1/5/2014

In the box

•

Fugoo Bluetooth Speaker

• Remote control (included with some models)

• AC wall charger

• Micro-USB charging cable

• 3.5 mm audio cable

• Accessory pouch

• Quick Setup Guide

• Remote lanyard

• Remote wrist strap

(included with some models)

(included with some models)

Fugoo Bluetooth Speaker controls

Part

1

2

3
4
5

6
7
8

9

Micro-USB charging

connector / update port

3.5 mm AUX input jack For playing music from the headphone

microphone For speakerphone function

volume down button ( - ) Lowers the volume

Action button Pause / Play and speakerphone control.

Volume up button ( + ) Raises the volume

Power button Turns the Fugoo Bluetooth Speaker

Bluetooth button For pairing with other Bluetooth devices

LED indicator Indicates status of the Fugoo Bluetooth

For charging the Fugoo Bluetooth
Speaker, and for updating its software

output of another device

Speaker

Description

2 1/5/2014

Charging your Fugoo Bluetooth Speaker

Checking the battery level

• Press
charge of the battery.

• If voice prom pts are enabled, the speaker responds w ith "Battery is alm ost full" or
another indication of how fully charged the battery is.

LED indicator voice

one blink Battery is full
two blinks Battery medium
three blinks Battery low
four blinks* Battery needs

*

The LED blinks amber when the battery reaches 5%.

the (Power) button

recharging

briefly. The LED blinks one to four times to indicate the

prompt

battery lev

100%

50%
25%

- correct? red?

el

5%

Charging your speaker

• Connect one end of the Micro-USB charging cable to the speaker and the other end
to a pow er outlet.

• The LED indicator blinks green during charging.

• The LED indicator glows steady green once the battery is fully charged.

Turning on your speaker

•

Press and hold the (Power) button to turn the speaker on or off.

•

When
inactivity. To turn the speaker back on, press the (Action), – (volume down), or +
(volume up) button.

the speaker is running from battery power, it will turn off after 5 minutes of

Connecting your speaker to smartphones and other devices

You can connect to your Fugoo Bluetooth Speaker either through its AUX input jack, or
through a Bluetooth wireless link. Only one of these inputs can be active at a time.

Connecting through an audio cable to the AUX input

• Connect one end of a 3.5 mm audio cable to your Fugoo Bluetooth Speaker's AUX
input jack, then connect the other end to headphones jack of your audio device.

• The LED glow s blue and a voice may say, “Disconnected. Bluetooth off. Connected”

• Plugging an audio cable into the speaker's AUX input jack turns
w ir e l e s s li n k, t

o sav e pow er and

maximize

battery

life.

off

the

Bluetooth

3 1/5/2014