FSR TBRT CABLE RETRACTOR Installation

4a.

ALIGN RING-PIN HOLES AND INSERT (2) RING PIN ON
BOTH SIDES OF ASSEMBLY. FOR ADDITIONAL
TAMPER-PROOF INSTALLATION, INSTALL (2) #6-32 x 1/4
LONG PAN HEAD SCREW.

4b.

CENTER ADJUSTABLE HANGER AND LOOSEN
WINGNUT. ALIGN ADJUSTABLE HANGER HOLES
WITH RETRACTOR FLANGE HOLES, ENSURING THE
HANGER IS VERTICAL AS POSSIBLE, AND INSERT
APPROPRIATE-LENGTH CLEVIS PIN. SECURE
CLEVIS PIN WITH HAIR-PIN COTTER.

4c.

LIFT RETRACTOR ASSEMBLY TO TAKE UP ALL
SLACK AND TIGHTEN HANGER WINGNUT TO
ENSURE ASSEMBLY WEIGHT IS CARRIED BY THE
TABLE. HANGER NUT CAN BE TIGHTENED FOR
ADDITIONAL INSTALLATION SECURITY.

(2) RING PIN

BOTH SIDES

(2) #6 PAN HEAD SCREW FOR

TAMPER-PROOF INSTALLATION

BOTH SIDES

CLEVIS PIN

FSR

1a.

ASSEMBLE RETRACTORS & GAP-FILLER BRACKETS
AS REQUIRED ONTO T6 GATHER BRACKET.

RETRACTOR

TBRT-SERIES CABLE RETRACTOR INSTALLATION INSTRUCTIONS

244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: [phone] - Fax: [phone]

T6 GATHER BRACKET

ADJUSTABLE HANGER NUT

LOCATED ON OPPOSITE SIDE

OF WINGNUT

#6 FLATHEAD SCREW

#6 PANHEAD SCREW

GAP-FILLER BRACKET

SECURE CLEVIS

PIN WITH HAIR-PIN

COTTER

(2) #6 FLATHEAD SCREW

43070 LIT1517

1b.

FOR 3 OR FEWER RETRACTORS, INSTALL CHASSIS
SUPPORT BRACKET ONTO RETRACTOR.

2.

ADJUSTABLE HANGER

TABLE

T6 SHROUD

T6 ASSEMBLY

INSTALL ADJUSTABLE HANGER ONTO T6 SHROUD WITH
4" CLEVIS PIN AND SECURE WITH HAIR-PIN COTTER.

4" CLEVIS PIN

3.

SLIDE RETRACTOR ASSEMBLY UP INTO T6 ASSEMBLY.

RING-PIN HOLE

CHASSIS
SUPPORT
BRACKET

(2) #6 FLATHEAD

SCREW

SECURE 4" CLEVIS PIN

WITH HAIR-PIN COTTER

RING-PIN HOLE

RETRACTOR ASSEMBLY

NOTE WINGNUT
LOCATION