FSR SW-DB-2GEXT Installation Instructions Manual

Page 1

SW-DB-2GEXT Extension Cover Installation Instructions

FSR

1. INSTALL SMART-WAY 2-GANG ELECTRICAL BOX (SOLD SEPARATELY, SEE BOX INSTALLATION INSTRUCTIONS) WITHOUT COVER PLATE (EXTENSION COVER WILL NOT WORK WITH SW-DB-1P1D BOX!). END KIT (SOLD SEPARATELY) & RACEWAY BASE EDGE (SOLD SEPARATELY) MUST BE INSTALLED FIRST IF MOUNTING BOX ON RACEWAY BASE END.

2. INSTALL #6-32 NUT COMPLETELY ONTO #6-32 HEX STANDOFF AND INSTALL STANDOFF TO ELECTRICAL BOX.

3. MAKE WIRING CONNECTIONS AS REQUIRED AND INSTALL DECORA UNITS (SOLD SEPARATELY) AND EXTENSION COVER TO ELECTRICAL BOX.

244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: 973.785.4347 - Fax: 973.785.4207

(4) #6-32 x 3/8"-LONG FLAT HEAD SCREW

EXTENSION COVER

RACEWAY BASE

(SOLD SEPARATELY)

DECORATOR STYLE DEVICES (SOLD SEPARATELY)

(4) #6-32 HEX STANDOFF

(4) #6-32 NUT

INSTALL SMART-WAY 2-GANG ELECTRICAL BOX (SOLD SEPARATELY, SEE BOX INSTALLATION INSTRUCTIONS) WITHOUT COVER PLATE

END KIT (SOLD SEPARATELY)

43387 LIT1773

PATENT PENDING

Page 2

SW-DB-3GEXT Extension Cover Installation Instructions

FSR

1. INSTALL SMART-WAY 3-GANG ELECTRICAL BOX (SOLD SEPARATELY, SEE BOX INSTALLATION INSTRUCTIONS) WITHOUT COVER PLATE. END KIT (SOLD SEPARATELY) & RACEWAY BASE EDGE (SOLD SEPARATELY) MUST BE INSTALLED FIRST IF MOUNTING BOX ON RACEWAY BASE END.

2. INSTALL #6-32 NUT COMPLETELY ONTO #6-32 HEX STANDOFF AND INSTALL STANDOFF TO ELECTRICAL BOX.

3. MAKE WIRING CONNECTIONS AS REQUIRED AND INSTALL DECORA UNITS (SOLD SEPARATELY). IF THERE IS A 'LINE VOLTAGE/LOW VOLTAGE' DIFFERENCE ON EITHER SIDE OF THE BOX DIVIDER, ENSURE THE SUPPLIED DIVIDER EXTENDER IS INSTALLED BEFORE PUTTING ON THE EXTENSION COVER.