
SS-USB-CHRG-PS6
Distribution for FSR’s
DC Powered USB Chargers
Power Products Group
SS-USB-CHRG-PS6
DESCRIPTION
DESCRIPTION
The SS-USB-CHRG-PS6 is a remote power
solution for the FSR IT-USB-CHRG,
SS-USB-CHRG and IPS-D717S DC Powered
USB Chargers; It consists of a rack mounted
board to remotely power up to six (6) DC
Powered USB Chargers and a 15 VDC@ 6 A
power supply with AC power cord. The unit
provides an inexpensive means of neatly
distributing USB power from an included single
power supply, eliminating the need for multiple
AC wall adapters and messy overloaded power
strips.
AWG MAXIMUM LENGTH (FT.)
22 60’
20 90’
18 140’
NOTE: Maximum length limits may be doubled if
using only five SS-USB-CHRG chargers or if a
maximum of five will be loaded at the same time.
FEATURES
FEATURES
• 1-RU (1.75”) high, low-voltage distribution board
• Two mounting holes are provided to attach to the
rear rack rails in a rack
• Rear of PCB should be covered (black foam tape
may be used)
• All connections are via captive-screw terminals
• Power supply is included to handle up to 6
remote FSR DC Powered USB Chargers.
• On-Board LED power indicator
• Inexpensive solution for remote USB power
distribution
COMPATIBLE DC CHARGER PLATES
IT-USB-CHRG
· Wall Plate DC to USB charger
Photos and illustrations are not to scale.
43054
SS-USB-CHRG
· Keystone DC to USB charger
IPS-D717S
· IPS DC to USB charger
FSR Inc.
244 Bergen Boulevard, Woodland Park, NJ 07424
Phone: 973.785.4347 · Fax: 973.785.4207
Order Desk: 1-800-332-FSR1
Web: www.fsrinc.com · E-mail: sales@fsrinc.com LIT1483

SPECIFICATIONS
UNIVERSAL
CHARGING
PORT
R1
J1
LD1
J3 J5
+
-
J3
+-+
-
+-+-+-+
-
J2J7J4 J6
FSR
SS-USB-CHRG-PS6
SS-USB-CHRG-PS6
36106
FSR 26890 POWER ADAPTER
15VDC@6A (INCLUDED)
2.812
1.720
.910
1.250
.235
.235
.312 2.500
R1
J1
LD1
J3 J5
+-+
-
+-+-+-+
-
J2J7J4 J6
FSR
SS-USB-CHRG-PS6
36106
(2) .375 x .250
.060
+
-
+
-
+
-
+
-
FSR SS-USB-CHRG SNAP IN, IPS-D717S PLATES
OR IT-USB-CHRG WALL PLATES CAN BE USED
TWO CONDUCTOR HOOK-UP WIRE (INSTALLER
PROVIDED). TWO OHM MAXIMUM ROUND TRIP. SEE
CHART FOR LENGTH VS. GAUGE REQUIREMENTS.
OBSERVE POLARITY AS INDICATED ON THE
SS-USB-CHRG-PS6 AND THE CHARGER PLATES.
POWER
INDICATOR
6’ IEC CORD (INCLUDED)
6’ OUTPUT CORD
WITH CONNECTOR
(INCLUDED)
AWG MAXIMUM LENGTH (FT.)
22 60’
20 90’
18 140’
NOTE: MAXIMUM LENGTH LIMITS MAY BE DOUBLED
IF USING ONLY FIVE SS-USB-CHRG CHARGERS
OR IF A MAXIMUM OF FIVE PORTS WILL BE
IN USE AT THE SAME TIME.
+5 Data-
IPS-D7175S
Data+GND
SPECIFICATIONS
SS-USB-CHRG-PS6
Photos and illustrations are not to scale.
Specifications are subject
to change without notice.
244 Bergen Boulevard, Woodland Park, NJ 07424
Phone: 973.785.4347 · Fax: 973.785.4207
Web: www.fsrinc.com · E-mail: sales@fsrinc.com