FSR PWB-270 User Manual

FSR

PWB-270 / PWB-273-CRST-DM INSTALLATION INSTRUCTIONS

244 Bergen Boulevard, Woodland Park, NJ 07424, Phone: [phone] - Fax: [phone]

COMPONENT MOUNTING DETAIL

WOOD STUD MOUNTING

WALL OPENING: 14-3/8" x 10-1/8"
NOTE: BOX CAN BE ORIENTED IN
ONE OF TWO POSITIONS

(4) #8 x 3/4" WOOD SCREW

UPPER COVER

CRESTRON DM SCALER
(SOLD SEPARATELY)

(4) #6-32 x 1-1/4" LG
PAN HEAD SCREW

BRACKET ASSEMBLY

(4) #6-32 x 1/4" LONG
FLAT HEAD SCREW

LOWER COVER

(4) #6-32 x 3/4" OVAL HEAD SCREW

ENSURE REAR SURFACE OF BOX DOES NOT

EXTEND PAST SURFACE OF WALL STUD

16" STUD CENTERS

(2" x 4" WOOD STUDS SHOWN)

1/2" - 5/8" WALL
THICKNESS

1/2" FROM STUD
TO BOX EDGE

43219 LIT1425A

STEEL STUD MOUNTING

WALL OPENING: 14-3/8" x 10-1/8"
NOTE: BOX CAN BE ORIENTED IN
ONE OF TWO POSITIONS

UPPER COVER

(2) #8 x 3/4" SELF-DRILLING SCREW

(FOR FLAT SIDE OF STUD)

(2) #8 x 2" SELF-DRILLING SCREW

(FOR OPEN SIDE OF STUD)

(4) 1" & 1-1/4" KNOCKOUT

(9) TIE WRAP POINT
TO SECURE WIRES
AND CABLES

SEE ELECTRIC BOX
KNOCKOUT DETAIL

LOWER COVER

ENSURE REAR SURFACE OF BOX DOES NOT

EXTEND PAST SURFACE OF WALL STUD

1/2" - 5/8" WALL
THICKNESS

1/2" FROM STUD
TO BOX EDGE

(4) #6-32 x 3/4" LONG OVAL HEAD SCREW

16" STUD CENTERS

(2" x 4" STEEL STUDS SHOWN)

(UPPER COVER NOT SHOWN)

LOWER COVER

(5) TIE WRAP POINT

TO SECURE WIRES

AND CABLES

(2) ELECTRIC BOX KNOCKOUT

(2) 1" KNOCKOUT

REMOVE FOR INSTA LLATION
OF ELECTRIC BOX

REMOVE FOR INSTALLATION

OF ELECTRIC DEVICE

ELECTRIC BOX KNOCKOUT DETAIL