FSP Group SDA2-650 Service Manual
DAGGER PRO Series
550W / 650W
8
6
3
2
6
C
E
I
Y
D
A
E
R
Introduction
The FSP DAGGER PRO features with standard SFX size and included ATX adapter bracket to help users easily
install an SFX power supply into an ATX, Micro-ATX or Mini-ITX chassis. With this compact size but comes with
powerful output, especially the +12V single-rail offers VGA cards full power individually and to avoid any overloading conditions. Besides, the fully modular and all black cable design save your system an optimal airflow
space and easy to make a cable management for a polished look.
Features
•Compliance with newest SFX12V V3.3
•Efficiency ≧ 90% at typical load
TM
•MIA IC
(Multiple Intelligence Ability) chip set inside
•Semi-fanless design for silent operation
•Quiet and long-lasting 92mm ball bearing fan
•Ribbon cables for the need of enthusiasts
•Powerful single +12V rail design
•Full Japanese electrolytic capacitors
•Intel Latest CPU ready
•Full protections OCP, OVP, SCP, OPP, OTP
12V
Semi-fanless Design
To spin over 20% loading that makes
optimal cooling and reduces noise.
+12V Single Rail Design
Designed for power-intensive VGA cards,
provides strong power to any overloading
condition.
12V
DC – DC Module
3.3V
Providing high efficient , stable power.
5V
SFX to ATX Adapter Bracket
Helps users easily install an SFX power
supply into an ATX, Micro-ATX or Mini-ITX
chassis.
© 2018-2019 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners.
DAGGER PRO Series
550W / 650W
Product Overview
MIA ICTM Chip Set with
DC-DC Module
An integrated power solution
of FSP’s own patented IC
design with DC-DC module
ensures solid power delivery
to your system.
Single +12V rail
Power
100%
VGA
Multi.+12V rail
Power
50%
VGA
Powerful +12V Single Rail
VGA card is a component which needs greedy
and stable power supporting most. The
compact size DAGGER PRO series comes
with a single +12V rail design that offers VGA
cards full power individually and to avoid any
overloading conditions.
100% Japan-made E-Cap
Japan-made electrolytic capacitors
endure over 100
it ensures safety on spare parts for
prolong lifespan and reliability.
© 2018-2019 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners.
o
C degree temperature,
Semi-fanless Design with 92mm Fan
An advanced semi-fanless design will spin over
20% loading that makes optimal cooling and
reduces noise under maximum operation.
DAGGER PRO Series
550W / 650W
Product Overview
SFX to ATX Adapter Bracket
It helps you easily install an SFX
power supply into an ATX, MicroATX or Mini-ITX chassis.
100mm
125mm
63.5mm
650W Only
Supports High-end Motherboard
The DAGGER PRO 650W features
with dual CPU power connectors to
support high-end motherboard and
provide CPU stable power.
2013 ErP/EuP Ready
The total AC power consumption of the
completed system is less than 0.3W in
standby mode.
E
N
E
R
G
Y
G
N
I
V
A
S
Full Modular Design with Ribbon Cable
Neat build and easy installation enhance cooling performance.
© 2018-2019 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners.
Loading...