FSI XM650U User Manual

Monitor User Manual

Updated 08.10.2018

XM Series

XM650U

This manual is based on beta rmware.
Some selections may be unavailable or not work correctly.

E-Mail: Support@FlandersScientic.com

Flanders Scientic, Inc.

6215 Shiloh Crossing

Suite G

Alpharetta, GA. 30005

Phone: [phone]

Fax: [phone]

www.FlandersScientic.com

Contents

TOPIC PAGE(S)

Safety Precautions 3-5

Parts & Their Functions 6-7
Menu 8-14

Dimensional Drawing 15

Return to Table of Contents

2

© 2018 Flanders Scientic, Inc.

Safety Precautions

OLED PANEL BURN IN WARNING

This display has been designed primarily for SDR Mastering / Monitoring applications.
HDR monitoring modes are provided as well and may be useful for short term client
review of HDR material. However, this display is not suggested for HDR mastering or
long term HDR monitoring as prolonged use of these modes can reduce the lifespan
of the display as well as have a negative impact on overall display performance.

Display of static content, overlays, OSD menu or scopes, may cause permanent
BURN IN on the display’s OLED panel.

Length of time required for burn in to develop varies due to many factors including
content and luminance level.

You should avoid displaying static content, especially in HDR mode for extended
periods of time.

To lessen the potential severity of burn in the display will start to dim if a static
image is detected for 2 or more minutes. The display will return to normal operating
luminance when the image is refreshed (see Panel Dimming section of manual for
details).

A DeNoise capability is provided that can help restore panel performance to some
extent, but when possible care should be taken to avoid conditions that may cause
burn-in .

Return to Table of Contents

3

© 2018 Flanders Scientic, Inc.

Safety Precautions

• All operating instructions must be read and understood before the product is operated.

• These safety and operating instructions must be kept in a safe place for future reference.

• All warnings on the product and in the instructions must be observed closely.

• All operating instructions must be followed.

• Do not use attachments or accessories not recommended by the manufacturer. Use of inadequate

attachments may result in serious accidents.

• Do not place heavy objects on the power cord. Route power cord to prevent people from stepping
on or resting objects on the cord. Check to ensure that both outlet and product connection points
are properly seated and secured.

• This product must be operated on a power source as specied on the specication label or product
screening. Always operate the product within the voltage range specied.

• Do not overload AC outlets or extension cords. Overloading can cause re or serious electric shock.

• Never insert an object into the product through vents or openings as this can cause serious electric

shock or damage.

• Do not expose product to water or other liquids as this can lead to electrical shock or permanent
damage.

• Do not attempt to service the product yourself. Removing covers can expose you to high voltage
and other unsafe conditions. Please seek the assistance of a qualied service professional for all
service needs.

• If any of the following occur, unplug the power cord from the AC outlet and consult a qualied service
professional to perform repairs:

• Power cord or plug becomes damaged.

• When any liquid is spilled on or in the product.

• When the product has been exposed to rain or water.

• When the product does not operate properly as described in the instruction manual.

• When the product has been dropped or damaged.

• Keep this product away from heat generating sources such as radiators, heaters, stoves, or other

heat generating products.

• If the product requires replacement parts, make sure that the service person uses replacement
parts specied by the manufacturer, or those equivalent parts having the same characteristics and
performance specications as the original parts. Use of unauthorized parts can result in re, electric
shock, and/or other damage.

• Upon completion of any service or repair work, request that the service technician perform safety
checks to ensure that the product is in proper working order.

• When mounting the product to a wall, ceiling, or within a rack/enclosure, be sure to install the
product according to the instructions of both the mount and monitor manufacturer.

• Unplug the power cord from the AC outlet before cleaning the product.

Return to Table of Contents

4

© 2018 Flanders Scientic, Inc.

Safety Precautions

• For proper screen maintenance please follow the guidelines below to prevent scratches, discoloration,
or other damage to the panel:

• Avoid striking the screen with any object.

• Do not wipe screen hard. Apply only gentle pressure if cleaning.

• Do not wipe the screen with solvents such as alcohol, paint thinner, or benzene as this can

cause permanent damage to the panel.

• Do not spray detergent or other cleaners directly on the monitor or panel.

• Do not write on the panel with any substance or object.

• Do not paste or stick anything to the screen as any adhesive can cause damage to the panel.

• Screen may be cleaned by gently wiping with lint free cloth to remove dust. For more thorough

cleaning use a lint free cloth that has been very lightly dampened with distilled water. Please
dry any excess moisture from the monitor or panel immediately to prevent damage.

• Take care in moving this product as serious injury or death can result from the sudden shifting or
falling of this object.

• The vents and openings in the product’s chassis are designed for ventilation. Do not cover, block,
or otherwise

• obstruct these vents and openings as insufcient ventilation can cause overheating and/or shorten

the life of the product. Do not place the object on a bed, sofa, rug, or other similar surface as this
can result in serious obstruction of ventilation areas. If using in enclosed space make sure to provide
proper ventilation to maintain allowable operating temperature range.

• The panel used in this product contains glass and can cause serious injury if broken. If the unit is
dropped or otherwise damaged take care to avoid possible injury by glass shards.

• Avoid prolonged exposure to direct sunlight as this can cause damage to the panel For proper
chassis maintenance please follow the guidelines below to avoid any potential damage:

• Do not wipe the chassis with solvents such as alcohol, paint thinner, or benzene.

• Do not expose the cabinet to any volatile substances.

• Do not allow prolonged contact with rubber or plastic.

• Apply only gentle pressure to chassis when cleaning.

• To clean use soft, lint free cloth to remove dust. A lightly dampened cloth, as described in the

screen maintenance section, may also be used to clean the chassis.

FCC (Federal Communications Commission)

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interface when the
equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.

Warning: Changes or modications not expressly approved by the manufacturer responsible for compliance void

the user’s authority to operate the equipment.

Return to Table of Contents

5

© 2018 Flanders Scientic, Inc.