Frymaster D20 User Manual

1. HYDRAULIC DIVIDER
D20

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

TABLE OF CONTENTS

SECTION « A » DESCRIPTION PAGE

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A1

Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A2

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3

Maintenance and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A3

For more information, please call our office: . . . . . . . . . . . . . . . . . . . . . . . A4

SECTION « B » DIMENSIONS

D20- FRONT & SIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B1

D20- BACK & SIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B2

SECTION « E » COMPONENT PARTS

D20- COMPONENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E1

SECTION « G » ELECTRIC SCHEMATIC

D20- 208-240V/3PH/50/60Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . G2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D20-A.DOC Rev. 12-2007

A 1

CAUTION

The manufacturer suggests to read this manual carefully.

INTRODUCTION

This equipment is manufactured with first quality material by experienced technicians. Proper
installation and maintenance will guarantee a reliable service for years to come.

A nameplate specifies the model number, serial number, voltage, amperage, frequency and
manufacturing date.

Drawings, electrical diagram and replacement parts numbers are included in this manual.

ATTENTION

DOYON is not responsible for damages to the property or the equipment caused
by personnel who is not certified by known organisations.

A 2

SHIPPING

For your safety, this equipment has been verified by qualified technicians and carefully crated before
shipment. The freight company assumes full responsibility concerning the delivery in good condition
of the equipment in accepting to transport it.

IMPORTANT

RECEPTION OF THE MERCHANDISE

Take care to verify that the received equipment is not damaged before signing the delivery receipt. If
a damage or a lost part is noticed, write it clearly on the receipt. If it is noticed after the carrier has
left, contact immediately the freight company in order that they do their inspection.

We do not assume the responsibility for damages or losses that may occur during transportation.

IN GENERAL

Take off the packaging material with care. Take off all the material used for packing and
accessories.

This equipment can be plugged on any network offering a protection of 15 amps.

INSTALLATION WARNINGS

INSTALLATION AND SERVICE

This equipment must be connected to the utility and electrically grounded in conformity to the
effective local regulations. If these are not established, this equipment must be connected according
to the National Electrical Code (NFPA 70-XX). This equipment has a male plug that meets those
requirements.

A 4

FOR MORE INFORMATION,

PLEASE CONTACT OUR OFFICE:

DOYON EQUIPMENT INC.

1255, rue Principale

Linière, Qc, Canada G0M 1J0

Tel. : [phone]

Canada : 1 [phone]

U.S. : 1 [phone]

FAX : [phone]

Internet: http://www.doyon.qc.ca

E-Mail : [e-mail]