Frontier Digital TM-619 SERIES, TM619H-2 5P, TM619H-2 4P User Manual
TSKTECH.IN
!
This 7 DAY’s Digital Timer Series is
available in 230VAC, with voltage free
output (5PIN) or voltage output (4PIN).!
The Timer Program & Clock Memory is
retained by Replaceable CR2032 or
Rechargeable V80H Lithium ION Battery.!
This Timer Series is accurate to the minute
with either 8 or 18 ON/OFF Events per day!
The 15 combination of Daily-Programs,
leads to great convince to user to choose
desired Days of Week!
The 7 days 24hrs programable timer
switch can automatically switch on and
switch off various kind of equipments at
preset time!
It’s widely used in 7 day programing of
streetlight, neon lights, lamps, water
heat ers, air con d iti o ns, bill board s,
signboards, sprayers, agriculture or
aquarium equipments, etc.!
20AMP@250VAC # TM619H-2 4P!
20AMP@250VAC# TM619H-2 5P!
These are available with replaceable
battery CR2032!
16AMP@250VAC # TM619H-2 4P!
These are available with rechargeable
battery V80H!
A. Functional description of the Button
on Panel!
1. TIMER: Programing Mode
2. MANUAL: !
Select “ON, AUTO, OFF” !
“Cancel Reset Program”
3. CLOCK: !
Clock settings “Day, Hour, Minutes”
Press & Hold for AM/PM
4. DAY: adjust the day of the week
5. HOUR: adjust the hour
6. MIN: adjust the minutes
7. LED: Indicates ON / OFF status
8. RESET: Reset the Timer setting
B. Adjusting the CLOCK!
-
Press and hold the “CLOCK” and the
press “DAY” key, “HOUR” key, “MIN”
key respectively to adjust the clock of
timer to accurate DAY, HOUR, MINUTE.!
-
Press and hold the “CLOCK” key over
3 Sec for “AM&PM”
LCD Screen shall display 00:00 - 23:59
in 24Hour Format.
MULTIPURPOSE 7 DAYS
DIGITAL PROGRAMMABLE TIMER
TM-619- SERIES
GENERAL INFORMATION
DESCRIPTION MODELS TYPES
PROGRAMMING THE TIMER #1
TSKTECH.IN
TSKTECH.IN
TSKTECH.IN
C. Start to programming the TIMER!
1. Press TIMER key. LCD screen shall
show !
2. Press DAY key to select any of the 15
combinations of daily programs. Every
press of DAY key, LCD shall alternate
through the 15 combinations.!
3. Press HOUR, MIN respectively to set
the desired Hour and Minutes for 1-ON
4. Press TIMER key again, the LCD
screen shall show !
5. Press DAY key to select any of the 15
combinations of daily programs. Every
press of DAY key, LCD shall alternate
through the 15 combinations.!
6. Repeat Step 3 to set desired Hour and
Minutes for 1-OFF
!
7. Press TIMER key again, the LCD
screen shall show !
8. Repeat Programing Step 2, 3 & 4 to set
the ON / OFF program-periods (Events)!
# => => # # # !
9. When finished program-setting (events)
press CLOCK. Press Clock after the
number of events but ensure its pressed
after setting the OFF Time.!
D. To Review or Reset the Programs
Press “TIMER” key, on each press the
LCD will display 18-ON and 18-OFF
events. If you want to change any of the
event timer, press MANUAL key and the
follow step 2 & 3.!
E. COUNT DOWN FUNCTION:
In clock mode, Press CLOCK and TIMER
together over 3 Sec for Count down
Function of Timer, LCD screen shall
display # # # !
Press and hold CLOCK key and HOUR,
MIN key respectively to set the count
down time (0:00 to 23:59)!
Press the MANUAL key to start the
countdown. The Timer will ON and OFF
after the set period. Press TIMER to
STOP the countdown.!
F. AUTO TIME DEFLECTION Correction
Weekly.!
In Clock mode, press MANUAL and
TIMER key into auto time deflection
correction mode
Press DAY key to adjust time deflection,
the setting range is +/- 30 Sec. Every
week the timer will adjust the time by the
set sec.!
The drift in the time over a week needs to
be observed with an accurate clock, to
know the drift.!
G. SLEEP MODE
In the clock mode, Press DAY, HOUR
keys over 3 sec the timer will go to sleep
mode and display is shutdown. This
feature to be used when the timer is not
used for a long timer and the battery
CR2032 life is extended. To activate Reset
the timer, Press key.!
Day-Combination should be same for ON & OFF
PROGRAMMING THE TIMER #2
Electrical Installation should only be
carried out by a competent person
(someone who has the necessary
skills, knowledge and experience to
carry out the work safely).
TSKTECH.IN
TSKTECH.IN
TSKTECH.IN
Loading...