Frontier vantage User Manual

Download

VantageTM TV by Frontier® User Guide

Get the most from your VantageTM TV by Frontier® products

Visit Frontier.com for more information

VantageTM TV by Frontier® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

How to Use the Remote Control .............................. 5

Watching Vantage

TV by Frontier® .......................... 6

Using the Set-Top Box Remote Control . . . . . . . . . . . . . . . . . . . . . . . 6

Controlling Live (Real-Time) TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Navigating Through Menus and Screens . . . . . . . . . . . . . . . . . . . . 11

Using Peeks and Guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Filtering Channels in the Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Record Your Favorite Shows with Your DVR .................24

Canceling Scheduled Recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

How to Use Parental Controls ...............................26

On Demand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Pay-Per-View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Access Your TV’s Interactive Features ....................... 31

Vantage

TV by Frontier® Apps ............................. 31

Explore, Entertain and Interact

with Frontier Enabled Apps .................................35

Setting Names for Receivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Vantage

TV by Frontier® on Your Computer . . . . . . . . . . . . . . . . 37

Vantage

TV by Frontier® on Your Smartphone or Tablet . . . . 37

Quick Tips About Your Vantage

TV by Frontier® Service .....38

Visit Frontier.com for more information

VantageTM TV by Frontier® Quick Resolution Guide . . . . . . . . . 39

Resolve Problems with Your TV Service . . . . . . . . . . . . . . . . . . . . . . 39

Change Your TV’s Screen Resolution . . . . . . . . . . . . . . . . . . . . . . . . 40

Program Your Remote to Control Up to Four Devices . . . . . . . . 40

Change Your TV’s Input Selection

to Match Its Video Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Check Device Connections for Your TV . . . . . . . . . . . . . . . . . . . . . . . 42

Check Video Inputs .........................................42

Connecting Your Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Your Important Frontier Information . . . . . . . . . . . . . . . . . . . . . 45

• For quick reference, record your important Frontier information here

Support Questions/Additional Resources . . . . . . . . . . . . . . . . . 46

• Accessibility Support

• Learn more about Frontier Communications products and services at Frontier.com

Visit Frontier.com for more information

How to Use the Remote Control

Control devices

with mode

buttons

Fast-forward in set increments

Go to recorded TV programs

list

Go to Program Info screen

Go to Guide screen

Change channel

Return to previously viewed live TV channel

Access the Options menu

Explore, entertain and interact with Vantage

TV by Frontier

apps

Navigate channels, menus and screens

Record TV with

one click

Replay the last

few seconds of a

program

Go to the

On Demand

library

Return to previous

screen

Go to Main

Menu screen

PiP

browsing

Exit from a menu

screen or return to

live TV

Mute the sound on

your

Edit text on the

Search screen

Your Remote Can Control Up to Four Devices

At the time of installation, your remote was set up to control your HD-ready receiver. The remote is also capable of controlling up to three other devices, such as the TV, DVD player or home theater system. You can access step-by-step instructions on how to program your TV or other devices by pressing MENU on your remote control and scrolling to Help and selecting Remote Control Setup.

Upgrade to our rechargeable Easy Find Remote Control or our Point Anywhere RF Remote Control for even more convenience and cool features. Learn more at Frontier.com.

Vantage

by Frontier

Visit Frontier.com for more information

Note: BLUE CAPITAL LETTERS refer to buttons on the remote control. Black bold letters refer to selections on your TV screen.

Watching Vantage

TV by Frontier®

Your set-top box, network hardware and TV should already be installed by your Frontier Technician.

To turn on your TV:

1. Turn on your TV using the power button on your TV or on your TV remote control. (Unless the technician synced your remote with your television, the POWER button on your set-top box remote control does not turn on the TV.)

2. Press the POWER button on your set-top box remote control to turn on the signal from the set-top box.

The last-watched channel appears on your TV.

Using the Set-Top Box Remote Control

To pair your remote to your TV, press the Setup Button on the remote and hold until the light blinks twice.

Press the Device Key you are trying to program (TV, DVD, AUX).

Press and hold the OK Button until the device turns off.

Release the button and you are done.

Here are some important buttons on the remote control, with descriptions of how you use them. Other buttons are shown and described in later topics.

Note: The following description of set-top box remote control features applies to many but not all Vantage

TV by Frontier® set-top box remote controls. Refer to the documents provided with your set-top box to get detailed information on its remote control.

Visit Frontier.com for more information

• POWER. Turns the signal from the set-top box to the TV on

and off.

This button does not turn the TV itself on and off. Use the TV

remote control or the power button on your TV set to turn the TV on and off.

• CHANNEL/PAGE. Press + or  to move up or down a channel.

Holding a button down continues the movement. After a channel changes, the screen shows the program that is playing now and the Channel peek. The Channel peek contains basic information about the program that is playing (for example, the channel number, channel identifier and title of the program) and disappears after a few seconds. You can also use the channel/page button to scroll up and down one screen at a time through some Vantage

TV by Frontier® screens.

A word about channel selection on your Channel Guide:

You will notice that your channel lineup shows only one channel number for each channel. Although many of the channels in your lineup are broadcast in HD, we only list it once on your channel guide. To watch in HD, simply tune into the channel number on the channel lineup for your location, for example, frontier.com/helpcenter. If your TV is HD ready, the selected channel will be presented in HD when available.

• VOLUME. Use this button on the remote control—not the volume button on the TV or on the TV remote control—to turn volume up and down.

Note: On some TV sets, you may have to use the TV controls

to set the volume near the middle of its range before using the set-top box remote control to control volume.

Visit Frontier.com for more information

• MUTE. Press MUTE to turn the sound off. A mute icon

appears on the screen for a few seconds and then disappears. Press MUTE again to turn sound back on.

• ARROW BUTTONS. Use these buttons to navigate and select

items in Vantage

TV by Frontier® screens. You can also use these arrow buttons while watching TV to bring up and navigate in peeks.

• OK. Activates a selected item in a screen.

• MENU. Gives you quick access to the features of your

video service.

Pressing the MENU button on the remote control displays the Main Menu peek that contains top-level options such as Browse Live TV and On Demand. Using UP ARROW and DOWN

ARROW, you can navigate among the options.

Visit Frontier.com for more information

• GUIDE. Displays the VantageTM TV by Frontier® program guide,

which lists the shows that are on now and will be available during the next two weeks.

• RECORDED TV. Displays all recorded shows currently stored

on your set-top box. You can also schedule recordings from the Recorded TV screen.

• ON DEMAND. Displays a list of videos that you can rent

on demand.

• INFO. Displays the Program Info screen with information

about the program you are watching, a program selected in the program guide or a program selected in a list, such as currently rented videos. The Program Info screen also shows options you can select for that program, such as Record episode or more showtimes.

• BACK. Returns to the most recently viewed VantageTM TV by

Frontier® screen.

• EXIT. Closes the VantageTM TV by Frontier® screen and returns

to full-screen video.

Controlling Live (Real-Time) TV

You control television programs that are currently showing in real-time (called “live TV” in this guide) using playback control buttons to pause, fast-forward and rewind recorded TV.

Visit Frontier.com for more information

To control live TV:

1. Press PAUSE on the set-top box remote control to pause the program for up to 60 minutes. The image freezes. A progress bar shows the following:

• The time at which you paused (shown as a vertical line with

the time above it).

• How much time has elapsed since you paused the program

(shown as the shaded area after pause time).

If you pause longer than the maximum amount of time allowed,

the program automatically begins playing again from the point at which you paused it.

2. Press PLAY on the remote control to resume playing the program from the point at which you paused it. You can also do the following:

• Press FF on the remote control to fast-forward continuously

or press SKIP to jump forward in short segments up to the point at which the program is playing in real-time. Press

FF once, twice, three times or four times to fast-forward at

increasing speeds.

• Press REW to rewind continuously or press REPLAY to

jump backward in short segments. Press REW once, twice, three times or four times to rewind at increasing speeds.

The Progress Bar for Live TV

The progress bar for live TV shows the following:

• The point you are watching in the recorded portion of the program, indicated by a vertical line with the time above it.

• How far you can rewind or fast-forward, indicated by the shaded areas before and after the point in the program that you are currently watching.

• The point at which you would be watching live TV, indicated by the end of the forward shading.

The progress bar disappears after a few seconds. You can

display the progress bar at any time by pressing PLAY or OK on your remote control.

Visit Frontier.com for more information

Navigating Through Menus and Screens

Use the arrows and OK on your remote control to navigate to and select programs and other items on VantageTM TV by Frontier® menus and screens.

To select items in Vantage

TV by Frontier® menus and screens:

1. Use the arrows on your remote control to move the border highlight right, left, up or down.

The border highlight shows your selection.

2. Press OK on your remote control to make your selection—that is, to make that highlighted action occur.

3. Press BACK on your remote control to return to the screen that you were viewing before the current one.

Peek

A peek is a slide-in element that appears at an edge of the TV screen as a result of pressing a set-top box remote control button. Peeks do not interrupt the audio experience, but will narrow the area of the TV screen that can be seen. Only one peek can be visible on the screen at a time—and you can dismiss a peek by pressing EXIT or BACK on the remote control or by waiting a few seconds for the peek to disappear. The figure in step 1 of the previous topic “To select items in Vantage

TV by Frontier® menus and screens” shows a live TV screen with the Main Menu peek element displayed on the left.

Sub-menus and Swim Lanes

From the Main Menu peek, top-level menu items open fullscreen sub-menus that contain secondary options. The horizontal panels on the sub-menu, called swim lanes, contain tiles listing the secondary options. A swim lane can have up to seven visible tiles.

Visit Frontier.com for more information

If there are more than seven secondary options, a View All prompt appears at the end of the swim lane.

If you select the View All prompt, a separate page opens listing all of the secondary options.

Using Peeks and Guides

Using the Main Menu Peek

The Main Menu peek is the vertical menu that is docked to the left edge of the TV screen and provides access to the features of your video service.

To display and use the Main Menu peek:

1. Press MENU on your remote control. The Main Menu peek appears.

2. Use UP ARROW and DOWN ARROW to highlight an item, such as Recorded TV.

3. Press OK to select the item.

The exact contents of each menu are determined by the

service provider.

4. Press MENU, EXIT or BACK to close the Main Menu peek. Alternatively, you can wait a few seconds for the peek to disappear.

Using the Guide

Selecting the Guide Style

Guide switching enables you to rotate through different Guide styles to easily find the programming you want. You can select the primary Guide style and other Guide styles to be included in the rotation. After views are selected, the GUIDE button enables you to rotate through the views and return to full-screen video.

Visit Frontier.com for more information

The list of available Guide styles is:

• Grid Guide. Shows listings for all channels.

• Channel Guide. Shows listings for a particular channel.

• On Now Guide. Enhances your experience of program

discovery, introducing posters and progress bars for On Now programming. On Now Guide also provides access to views of Just Missed and On Next programming and enables you to filter programs that have already aired or have not yet aired. When the On Now Guide is displayed, video remains in the background, but the audio is not affected.

After the last view in the rotation appears, the Guide views

are dismissed, and the display goes to live TV. You can also dismiss Guide views by pressing BACK or EXIT.

To find and watch a current program in the Guide:

1. Press GUIDE on the remote control. The Guide screen appears. High-definition programs are indicated by the HD symbol.

2. Use the following buttons on your remote control to select a program:

• Use CHANNEL/PAGE and UP ARROW and DOWN

ARROW to scroll vertically through the Guide.

• Use RIGHT ARROW and LEFT ARROW to scroll horizontally

through the Guide.

Visit Frontier.com for more information

3. To begin playing the selected program, press OK on your remote control. If the program is currently available, it begins playing. If the program is not available because it is scheduled for a later time, a Program Info screen appears.

4. Use the arrows and OK to select one of the options provided on the Program Info screen (for example, Record episode), or use BACK to return to the Guide.

The options provided on the Program Info screen depend on the type of program selected and when the program is playing.

Using the Program Info Screen

The Program Info screen displays information about a selected program and also enables you to perform various actions related to the program, such as watching or recording it.

To display the Program Info screen for a program:

1. In the Guide, use the arrows on the remote control to select the program, and then press INFO on the remote control.

2. If you are watching in full-screen mode, press INFO while watching the program.

Summary

The Summary option on the horizontal menu bar displays information about the program. The Summary screen also displays options appropriate for the type of program, such as Rent and Watch preview for a video, or Watch, Record episode, Record series and More showtimes for a currently playing live TV program.

Visit Frontier.com for more information

Cast and Crew

The Cast and Crew option on the horizontal menu bar displays search results for cast and crew members of the program. This list is the same list that appears when you search for programs by person.

Audio Language

The Audio Language option on the horizontal menu bar displays the available languages for a particular program. Use the arrows and press OK to select the language.

Using the Browse Peek

The Browse peek slides up from the bottom of the TV screen when you are watching in full-screen mode, enabling you to preview programs on other channels without tuning away from the current channel.

The Browse peek is closely related to the Channel peek, which appears automatically upon channel change.

To display and use the Browse peek to see which programs are playing now or later:

1. Press DOWN ARROW on your remote control to display the Browse peek.

Visit Frontier.com for more information

2. Press UP ARROW or DOWN ARROW to step backward or forward through programs that are currently On Now on other channels, and then press OK to change channels.

For each program, the Browse peek displays the title, a

picture-in-picture (PiP) and relevant information, such as the channel number, a synopsis of the program and how many minutes are left in the program.

3. Press RIGHT ARROW and LEFT ARROW to step forward and backward through the content shown on that channel. For example, on a live TV channel, you can view the Just Missed and On Next programs from the Browse peek.

4. Press OK to tune to the program selected in the Browse peek to open the Program Info screen to find out more about the program.

5. Press EXIT or BACK on the remote control to close the Browse peek. Alternatively, you can wait a few seconds for the peek to disappear.

Visit Frontier.com for more information

Using the Recent Peek

The Recent peek slides down from the top of the TV screen when you are watching in full-screen mode, enabling you to preview and tune to any of the last five channels viewed. The Recent peek is inactive when you are looking at the Guide or another Vantage

TV by Frontier® screen.

To display and use the Channel peek to see which programs are playing now or later:

1. Press UP ARROW on your remote control to display the Recent peek.

The Recent peek displays channel and program title

information, a progress bar and a PiP of the highlighted channel. Alternatively, depending on your remote control, you may be able to press RECENT or LAST to display the Recent peek.

2. Press RIGHT ARROW or LEFT ARROW to step through the previous five channels viewed. If you tuned to less than five channels, only the channels you visited appear in the Recent peek. If you tuned to a channel more than once, it appears as a single entry.

3. Press OK to tune to the program highlighted in the Recent peek.

4. Press BACK, EXIT, RECENT or LAST on the remote control to close the Recent peek. Alternatively, you can wait a few seconds for the peek to disappear.

Using the Channel Peek

The Channel peek slides up from the bottom of the TV screen when you are watching in full-screen mode, enabling you to see some basic information about a channel just after a channel change. The Channel peek is closely related to the Browse peek; except the Channel peek appears only after you change the channel (not on request) and when you select a program from the Guide.

Visit Frontier.com for more information

To display the Channel peek:

1. Press CHANNEL +/ on the remote control to change channels. Alternatively, select a program in the Guide or, while using Restart Anytime, press DOWN ARROW once.

The Channel peek appears.

If you start to browse channels, the Channel peek is replaced

by the Browse peek.

2. Press BACK or EXIT on the remote control to close the Channel peek. Alternatively, you can wait a few seconds for the peek to disappear.

Using the Options Peeks

The Options peek slides out from the right edge of the TV screen enabling you to quickly access settings and filters. There are two types of Options peeks available:

• Viewing Options. This peek appears when you are in full-screen TV mode. The options in this peek pertain to live TV filtering, favorites, closed captions, TV zoom and channel search.

• Guide Options. This peek appears when you are in the Guide. The options in this peek pertain to live TV filtering, jump to day, channel categories, favorites, Guide settings and channel search.

Both versions of the Options peek provide a Live TV Filters option that enables you to select categories and subcategories used in Guide program filtering.

Visit Frontier.com for more information

To display the Options peek:

1. In full-screen TV mode or from the Guide, press OPTIONS on the remote control. Alternatively, in full-screen TV mode, press RIGHT ARROW to display the Options peek. The Options peek appears.

2. Press BACK or EXIT on the remote control to close the Options peek or wait a few seconds for the peek to disappear.

The Options peek also closes when any of the options in the

peek are selected; for example, selecting Edit Favorites makes the Settings: Favorite Channels list screen appear.

Filtering Channels in the Guide

To find the programming you want, there are a number of ways to filter content that appears in Guide views and other areas, such as Channel and Browse peeks. You can filter by channel and by program in the Guide.

Channel Filtering

You can filter channels in any of the following ways:

• Favorite Channels lists. You can customize multiple lists of channels for display in Guide views. While you have a Favorite Channels list selected, Guide views, Channel peeks and Browse peeks only display channels from the selected list.

• Channel categories. Channel categories are pre-defined groupings of channels that help you browse for related content. When you select a channel category, it applies to the current Guide view only and does not affect future Guide views, Channel peeks or Browse peeks.

• Hidden channels. You can hide channels in Guide views using the channel map.

You can use one or more of these filters together. For example, you can apply the subscribed filter to a list of hidden channels. You can then select a favorites list and reorder the channels list. These actions result in a display that shows all subscribed channels that are hidden and are in the favorites list. The channels are displayed in the order set by channel reordering.

Visit Frontier.com for more information

Favorite Channels Lists

A Favorite Channels list is a customized list of channels for display in Guide views. You can abbreviate Guide views to contain only the channels that you choose and also create multiple Favorite Channels lists; for example, a list for each member of the household.

You can access the Favorite Channels list set up from the:

• Settings screen. From the Main Menu, select Settings, go to Television and then select Set Up Favorites.

• Options peek. From the Options peek, select Edit Favorites.

You can select a Favorite Channels list from the:

• Browse Live TV screen. From the Main Menu, go to Browse Live TV, select Favorites and then select the list you want. You see currently configured favorites lists as tiles. If no favorites lists have been configured, then no tiles are displayed, and there are no current lists to choose from. Once you set up a list, the tile that represents your list appears.

• Options peek. From the Options peek, select Favorites Lists, and then select the list you want.

• Favorites Lists. To select an active Favorite Channels List.

• Add to Favorites. To add the currently tuned channel to the

active Favorite Channels list.

• Remove from Favorites. To remove the currently tuned channel from the active Favorite Channels list.

• Edit Favorites. To update the channels in your Favorite Channels lists.

Visit Frontier.com for more information

Channel Categories

You can use categories to access channels that are grouped together by subject matter, genre or content provider.

To find program categories:

1. Press MENU on your remote control, select Browse Live TV and then select Categories.

The Categories screen appears.

Alternatively, open the GUIDE, open the Guide Options peek,

select Channel categories and then select the category you want.

2. Use UP ARROW and DOWN ARROW to highlight a subcategory, and then press OK to select it. A filtered program guide appears.

Note: The service provider determines the exact contents of

each category.

3. Press EXIT to return to full-screen display.

Subscribed Channels

If your provider has enabled this feature, you have the option to view just the channels to which you are currently subscribed, or to view all channels offered by your provider including those to which you are subscribed.

From the MAIN MENU, select Settings, go to Television and then select Subscribed Channel Settings.

Selecting View All shows all channels available from your provider. Selecting View Subscribed shows only channels to which you are subscribed. When done, select Save.

Note: The changes you make here affect all channel lists globally, including your Favorites lists and filtered lists.

Visit Frontier.com for more information

Channel Reordering

You can manually reorder the sort order of individual channels in the channel guide and all lists, including Favorites lists and filtered lists.

To change the order of an individual channel:

1. From the MAIN MENU, select Settings, go to Television.

2. Select Customize Channel Guide.

3. Select Change Order.

4. Press the DOWN ARROW until you highlight the channel you want to reorder.

5. Press the RIGHT ARROW until you select either the up arrow icon or the down arrow icon.

• Selecting an up arrow icon moves the channel up one

position in the channel list.

• Selecting a down arrow icon moves the channel down one

position in the channel list.

• Continue to select the desired arrow icon until the channel

has moved into the position that you want.

6. Select Save.

Visit Frontier.com for more information

The changes you make here affect all channel lists globally, including Favorites lists and filtered lists. Alternatively, you can reorder a channel’s position in the channel list by typing in a new channel position.

To change the order of an individual channel by typing in a number:

1. From the MAIN MENU, select Settings, go to Television.

2. Select Customize Channel Guide.

3. Select Change Order for the left-hand menu.

4. Press the DOWN ARROW until you highlight the channel you want to reorder.

5. Press OK. The Move channel dialog opens.

6. Enter the number of the new position for the channel.

7. Select Move channel.

8. Select Save.

The changes you make affect all channel lists globally, including Favorites lists and filtered lists.

Hidden Channels

You can hide individual channels from appearing globally in all channel lists, including Favorites lists and filtered lists.

To hide a channel:

1. From the MAIN MENU, select Settings, go to Television.

2. Select Customize Channel Guide.

3. Press the DOWN ARROW until you highlight the check mark next to the channel you want to hide.

4. Press OK to deselect the channel. It now appears in the list without a check mark next to it. This means the channel will not appear in any Guide, Favorites list or filtered list of channels.

5. Select Save.

To unhide a channel:

1. From the MAIN MENU, select Settings, go to Television.

2. Select Customize Channel Guide.

Visit Frontier.com for more information

3. Press the DOWN ARROW until you highlight the empty square next to the channel you want to unhide.

4. Press OK to unhide the channel. The channel now has a check mark next to it and will reappear in all Guides, Favorites lists and filtered lists of channels.

5. Select Save.

To reselect all channels:

1. From the MAIN MENU, select Settings, go to Television.

2. Select Customize Channel Guide.

3. Select Check all on the left-hand menu. All channels are now selected with a check mark and will appear in all Guides, Favorites lists and filtered lists of channels.

4. Select Save.

Record Your Favorite Shows with Your DVR

One DVR, one experience, any receiver

The Total-home DVR has up to 1TB storage and the ability to record up to six shows at once, viewable on any TV:*

• Schedule, update or delete your recordings from any room in

your home.

• Pause your recorded show in one room and pick it up where

you left off in another.

• Pause and rewind live TV or recorded shows from any receiver.

• Set Parental Controls for Frontier Movies, Pay-Per-View and

live or recorded shows.

Pause, fast-forward and rewind live TV from any receiver

Your Total-home DVR stores up to 60 minutes of the live TV channel you’re watching, on up to four of your receiverconnected TVs at the same time! (When you change channels, your DVR will begin storing the new program instead.) You can rewind live TV by pressing REW. You can also freeze live TV for up to 60 minutes by pressing PAUSE (press PLAY to restart).

*The number of channels that can be streamed simultaneously is dependent upon the bandwidth to the home and how your home is provisioned. DVR not included with U-basic packages. Models may vary. Total-home DVR functionality is available on up to eight TVs and requires a receiver for each additional TV.

Visit Frontier.com for more information

Record the program you’re watching from any receiver:

1. Press RECORD on your remote control to begin recording the program you’re watching. The Record light on your receiver remains lit until recording stops automatically at the program’s scheduled end time.

2. You can also press STOP to end recording at any time.

3. Press OK to confirm.

Schedule program or series recordings from the Guide from any receiver:

1. Press GUIDE.

2. Use UP/DOWN ARROWS to scroll to the program you want to record.

3. Press RECORD once to record a single show (one red dot appears).

4. Press RECORD twice to record the whole series (three red dots appear).

5. Press RECORD three times to cancel recording.

Search for a show or series you want to record from any receiver:

1. Press MENU, select Live and use the DOWN ARROW to select Search.

2. Press OK.

3. Choose Options to narrow your search, or type the show title (use ARROWS to highlight a letter, then press OK to select it).

4. Highlight the show you want when it appears and press INFO to record a single episode or the whole series.

Watch your recordings from any receiver:

1. Press RECORDED TV and select Browse Recordings to see a list of your recordings.

2. Highlight a show and press OK to see a Program Info screen, then select Play to watch the program.

Now you can watch hit TV shows in more places

Take the Vantage

TV by Frontier® experience with you on your computer, smartphone or tablet with an extensive library of On Demand programs.

Visit Frontier.com for more information

Canceling Scheduled Recordings

You can use the program guide or the Recorded TV screen to cancel a single recording or a series recording.

In the program guide, individually scheduled recordings are marked by a red dot, and series recordings are marked by three overlapping dots.

To cancel a recording from the program guide:

1. In the program guide, use the CHANNEL/PAGE button and arrow buttons on your set-top box remote control to locate and select the program for which you want to cancel recording.

2. Identify the type of program for which you are canceling recording and use the RECORD button accordingly:

• If the program you want to cancel is an individually

scheduled recording (shown by a single red dot), press the

RECORD button on your remote control twice.

The first press changes the program to a series recording

(three overlapping dots), and the second press cancels the recording (the dots disappear).

Note: If the series recording scheduled on the first press

conflicts with previously scheduled recordings, the Recording Conflict screen appears. Select Record this series only when no conflict occurs, and then press OK on the remote control. You are returned to the program guide, where three overlapping red dots are shown in the program guide cell.

Press the RECORD button again to cancel the recording.

• If the program you want to cancel is a series recording

(three overlapping dots), press the RECORD button once.

This cancels the entire series recording, and the dots

disappear from the program guide.

How to Use Parental Controls

Once you have a personal identification number (PIN), you can restrict viewing by TV or movie rating, all adult-only programming, who can rent Vantage

TV by Frontier® Movies

and more.

1. Press MENU, then RIGHT ARROW to Options, then down to Parental Locking. Press OK.

Visit Frontier.com for more information

2. Use the remote control’s number pad to enter your four-digit PIN and press OK (press DELETE to clear an entry). You’ll have to enter your PIN twice. The Parental Locking screen will appear with your locking options.

Be sure to scroll down to the second page if you want to lock adult-only content, titles and posters from the standard channels, Vantage

TV by Frontier® Movies and purchases from

Account Manager.

On Demand

Vantage

TV by Frontier® On Demand

is like having an entertainment superstore in your living room. Watch what you love, whenever you want! You’ll find:

• Vantage

TV by Frontier® Movies: Choose from a huge selection including new releases and titles available the same day as DVD.

• Free shows On Demand: Watch movies, kids’ shows, sports, hit TV shows and more—all for free—based on your subscription package.

• Premium On Demand: Watch hit TV shows from premium providers like HBO,® STARZ® and SHOWTIME,® based on your subscription package.

• Subscription On Demand packages: Get unlimited access to specialty programming—kids’ shows, anime, karaoke and more—for a low monthly fee.

Press ON DEMAND on your remote control to get started.

Tune to Channel 200 to see what’s new On Demand with behind-the-scenes features and movie trailers.

Rent Movies On Demand

Vantage

TV by Frontier® Movies is evolving the way you watch.2 Movies the way they’re meant to be seen. The newest releases up to a month before Netflix.® The best entertainment, no envelopes attached.

Rentals are usually available for 24-hour timeframes, or extended-viewing timeframes up to three days. Many are available in HD. Here’s the fastest way to browse Vantage

TV by Frontier® Movies:

Visit Frontier.com for more information

1. Press ON DEMAND on your remote control, use ARROWS to select VantageTM TV by Frontier® Movies and press OK.

2. In Movies, you can browse through categories like Just In and New Releases, or you can see all available movies at a glance by highlighting All Movies and pressing OK.

3. When you find the movie you want to rent, highlight it and press OK (if parental locks are set, enter your PIN), then select Rent and press OK.

4. Press OK again to confirm and the program will begin.

Note: While browsing, you can highlight a title and press INFO to see details about the program and even rent from the Program Info screen.

Free On Demand programming varies by package subscription. Subscription to

appropriate package is required to access FREE and/or PREMIUM HD On Demand titles.

Customer responsible for applicable On Demand charges and surcharges. Once an On Demand is ordered, it cannot be canceled by remote or customer care. HBO,® Cinemax® and related channels and service marks are the property of Home Box Office, Inc.

Search by title or name:

1. Press the ON DEMAND button on your remote control.

2. Use the DOWN ARROW to select Search and press OK.

3. Use the ARROWS to highlight letters one at a time to spell out

the show title or actor’s name you’re searching for; press OK after highlighting a letter to enter it in your search. (To enter a number, select 123 and press OK to bring up a number keypad. Select ABC and press OK to return to the regular keyboard.)

Note: As you type in letters and numbers, a list of results

appears. The more characters you enter, the more focused your results become.

4. When the program you’re searching for is displayed, highlight

it using the UP/DOWN ARROWS and press OK.

5. A Program Info screen appears showing details about the

program and rental price. Select Rent and press OK. Press

OK again to confirm and the program will begin.

To return to live TV programming, press EXIT TO TV.

Visit Frontier.com for more information

Watch On Demand Programs

Your rentals are available for you to watch at any time during the rental period.

To watch:

1. Press ON DEMAND on your remote control and select My Videos from the main Video On Demand screen.

2. Use the ARROWS to select the video you want and press OK to start watching.

You can switch to another channel at any time while you’re watching On Demand programming. The show will pause automatically and you may return to it at any time (within your rental viewing time period) and resume watching exactly where you stopped it. You can also start over at any time.

To stop watching your On Demand selection before it ends or to continue watching later, press STOP, select Watch Live TV or Recordings on the screen that appears and then press OK.

To resume watching where you left off, select Channel 1 at any time during the rental period. (To start watching again from the beginning, press ON DEMAND to see your My Videos screen and click the title.)

On Demand Billing

Once your On Demand selection is rented, it cannot be canceled using your remote control or by calling Customer Care. You will be billed.

Your On Demand rentals will be automatically added to your monthly Frontier bill. Prices, dates and programming are subject to change.

Note: Adult programming rentals will be listed by studio name if available; otherwise they will be identified as “adult content.”

Set Limits on Who Can Rent or Watch On Demand Shows

Parental locking options let you set limits on who can watch what. See How to use Parental Controls on page 26.

Visit Frontier.com for more information

Using your coupon code is easy:

1. Press the ON DEMAND button on your remote control.

2. Use the DOWN ARROW to select My Offers.

3. Select Enter New Offers On Demand Coupon and press OK.

4. Enter your four- to six-digit coupon code, then use the LEFT

ARROW to select Continue and press OK.

5. If your coupon is currently available, select Redeem Now to rent.

Pay-Per-View

Get a front row seat to one-time-only events! Nothing captures the excitement of live TV better than Pay-Per-View. Unlike Vantage

TV by Frontier® Movies, Pay-Per-View events are shown at scheduled times. You can order Pay-Per-View up to 14 days in advance. Once it’s ordered, an event can’t be canceled.

Channel 100 for Front Row—highlights on upcoming Pay-Per-View events

Channel 101 for Vantage

TV by Frontier® Pay-Per-View schedule

Channel 106 for Pay-Per-View channels Channel 107 for TVN1A Pay-Per-View

How to order Pay-Per-View:

1. Channels 106 and 107. Note: You can also press GUIDE and use the UP/DOWN

ARROWS to select one of the Pay-Per-View channels.

2. Use the RIGHT ARROW to see what’s coming up in the

schedule. Press FF to jump forward 24 hours at a time; press

REW to go back in 24-hour increments.

3. Select the program you want to order and press OK. A

Program Info screen will appear with event time and pricing.

4. Press OK to rent (if parental locks are set, enter your PIN).

Press OK again to confirm your order. Press EXIT TO TV to return to the channel you were watching.

DON’T FORGET! Tune to the event’s channel at the scheduled start time. If you tune in late, you won’t be able to rewind to view the portion you missed.

Visit Frontier.com for more information

Pay-Per-View Billing

Any Pay-Per-View orders you place are automatically added to your monthly Frontier bill. You’ll find them in the “usage charges” section, listed by title with the date of the event and its price.

Note: Once a Pay-Per-View is ordered, it cannot be canceled by remote control or Customer Care. You will be billed and the event will air on your TV set. Event schedules are subject to change. Prices, programming and offers are subject to change.

Set Limits on Who Can Rent or Watch Pay-Per-View

Parental locking options let you set limits on who can watch what.

1. Use ARROWS to select Options and Parental Locking.

2. Select and enter a four-digit PIN.

3. Select what you want to block including purchases, programming and movies by rating.

4. Don’t forget to save your changes.

Access Your TV’s Interactive Features

Two ways to Go Interactive

• Press the GO INTERACTIVE button on your remote control

and find the app that’s right for you. Press OK to launch it and explore.

• Press MENU on your remote control. Then use ARROWS to

select Interactive and Interactive Apps. Press OK.

Add Frontier High-Speed Internet and Frontier Voice digital home phone service to your Vantage

TV by Frontier® service—

they work together.

Caller ID Notifications on TV

With Frontier Voice, you can see who’s calling on your TV screen without changing the channel. Tune to Channel 9900 to manage, view Call History logs or even initiate a call with your remote control.

Caller ID on TV requires subscription to VantageTM TV by Frontier® and Frontier Voice.

VantageTM TV by Frontier® Apps

Vantage

TV by Frontier® Apps let you interact with your TV— and, in most cases, they’re included with your VantageTM TV by Frontier® subscription. We offer lots of seasonal apps and

Visit Frontier.com for more information

we’re continually adding new ones, so check back often to see what’s currently available.

Simply press GO INTERACTIVE on your remote control to explore the extensive choices. They’re easy to enjoy—there’s no need to switch inputs or buy extra equipment. And the few subscription apps can be purchased easily via the Account Manager on-screen app on Channel 9910.

Frontier High-Speed Internet account required for some applications. (Indicated below)

Application Name Description Access

My Multiview My Multiview allows you

to choose your favorite channels and watch four at once!*

GUIDE, My

Multiview

Other Multiviews1:

Kids SD

News SD

Sports SD

Paquete Español

Press MENU on your remote control and use

UP/DOWN ARROWS to

choose My Multiview.

Press INFO on your remote control.

Select Add/Remove channels.

Use UP/DOWN

ARROWS to scroll

through the channels.

Other Multiviews:

Kids - 301

News - 201

Sports - 601

PE - 3001

* A limited number of HD channels are not supported for display within My Multiview.

Channels/content available for viewing in my Multiview are based on TV package and additional programming purchased.

Visit Frontier.com for more information

Application Name Description Access

CNBC App If you have Vantage

TV by Frontier® and High-Speed Internet, you can track your stocks and receive live updates from CNBC. You can also review current news articles and videos and watch CNBC live while you check your personalized stock prices.

218 or GO

INTERACTIVE,

Channel Extras

Weather On Demand

Access the weather whenever you want— view forecasts, videos and radar for any ZIP Code in the U.S.

227 and add your ZIP Code of choice or GO

INTERACTIVE

Social TV (Facebook

)

Follow up to ten Facebook accounts on your TV without missing your show. Update your status, post to your wall, rate what you’re watching and more.

GO INTERACTIVE,

Entertainment

TumbleBooks TV Gather the kids to read

along with animated digital books on TV. TumbleBooks TV provides illustrations and narration for over 140 books for kids ages six to twelve. Try out five to ten highlighted books for free! Unlimited access to the full library is available for only $5/mo.* (not available with U-basic package).

345 or

GO INTERACTIVE,

Entertainment

Visit Frontier.com for more information

Application Name Description Access

VantageTM TV by Frontier® Games

Discover VantageTM TV by Frontier® Games and play all of your favorites. There’s something for everyone. Get unlimited play for just $5/mo.*

Games include:

Blackjack

Play one of the most popular casino games right on your TV. Watch your cards carefully and hope you don’t bust!

WPT

: Texas Hold ’Em

Raise the stakes and take poker to the next level with WPT: Texas Hold ’Em poker. Put your card skills to the test and see if you can come out the big winner!

Deal or No Deal™

Solitaire

and more!

93 or

GO INTERACTIVE,

Entertainment

1. Tune to Vantage

TV by

Frontier

Games on Channel 93 or press GO

INTERACTIVE

on your remote control and select

VantageTM TV by Frontier® Games.

2. Press OK to start Vantage

TV by Frontier

Games.

3. Use your remote control to start playing games or to create a new user profile.

4. Select any game for rules and more information on how to play.

*Access to unlimited game play requires $5/mo. High-Speed Internet account.

Visit Frontier.com for more information

Explore, Entertain and Interact with Frontier Enabled Apps

With Frontier enabled apps, entertainment isn’t limited to one screen—you can watch, control and interact with your TV using your tablet or smartphone. Frontier enabled apps live on your mobile device and work with your connected VantageTM TV by Frontier® receivers. There’s no need to switch inputs or buy extra equipment.

A Frontier High-Speed Internet account is required to connect a supported device to Frontier receivers.

To connect a device to a TV/receiver:

1. Connect your device to your Frontier High-Speed Internet home Wi-Fi.

2. Tune to Channel 9301 and follow these steps:

• Read and accept the terms and conditions.

• Change the name of the receiver (choose preset, or create

a custom name).

• Set the Connection Mode to Default (this will make it easier

to manage guests and apps).

Repeat these steps with any TV you would like to use with Frontier enabled apps.

How to Find Apps:

Press GO INTERACTIVE on your remote control and select Frontier Enabled to see a full list of available apps, details about supported devices and QR codes that you can scan with your device to download apps.

Frontier High-Speed Internet service is required to connect supported devices to receivers.

Visit Frontier.com for more information

Application Name Description

FrontierTV FrontierTV lets you watch TV on your

computer, tablet or smartphone. It's free to Frontier customers who subscribe to Vantage

TV by Frontier®. FrontierTV supports 70+ channels of live TV, including the most popular content providers. Watch Live TV and On Demand shows, browse the programming guide, manage your DVR using our app or download popular shows from the mobile library to watch later on your device.*

*Requires qualifying device, Select Family or higher TV plan and Wi-Fi or data connection. Content may vary by device, TV plan and viewing location. Quality of picture varies by device and data connection. Data charges may apply. High-Speed Internet account required.

Note: For complete details and links to the apps, go to

https://frontier.com/tveverywhere

Setting Names for Receivers

You can customize the name of each TV receiver in your home.

To change the TV receiver name:

1. Press MENU on your set-top box remote control.

2. Press the DOWN ARROW to select Settings on the

MAIN MENU, then press OK.

3. Select Television, then press OK.

4. Select TV Receiver Name, then press OK.

5. Enter a name for the TV receiver by doing one of the following:

Visit Frontier.com for more information

• Select a name already listed, then press OK.

• Press arrow buttons to move to a letter, number or space,

then press OK. Continue until the name is entered. Select Save, then press OK.

6. Select Save, then press OK.

Vantage

TV by Frontier® on Your Computer

• Watch Live Disney, ESPN, CNN and more at home or on the go with Frontier.com online.

• Watch over 10,000 TV shows, movies, sports, music and more on your computer at no extra charge.

• View your TV listings and manage your DVR online.

To get started:

1. Visit Frontier.com.

2. Log on with your Frontier ID (email address) and password.

1TV and High-Speed Internet account required for DVR-related functions.

VantageTM TV by Frontier® on Your Smartphone or Tablet

Enhance your entertainment experience with the free app for your tablet and smartphone. Enjoy live TV channels or access thousands of hit TV shows On Demand! With FrontierTV, you can catch up or keep up with the sports, news and shows you love from wherever you are.

Manage your DVR, browse the guide, watch shows and use your device as a remote control.

• Stream live TV, movies, sports family shows and more.

• Carry your show from room to room and watch on your

mobile device.

• Turn your devices into extra TVs so everyone can watch what they want.

To get started:

1. Download the FrontierTV app from iTunes or Google Play.

2. Log on with your Frontier ID (email address) and password to link to your account.

Visit Frontier.com for more information

Quick Tips About Your VantageTM TV by Frontier® Service

Best ways to locate channels quickly

• Press any ARROW to access your onscreen Picture-in-Picture

browse bar.

• Print a channel lineup guide for your area at Frontier.com.

See what’s hot to watch now

• Press ON DEMAND on your remote control to access

Frontier Movies.

Watch exclusive Vantage

TV by Frontier® channels

• Front Row Channel 100—Learn what’s coming up on

Pay-Per-View.

• Frontier Movies 200—Watch Frontier Movies trailers, interviews and more

• Buzz Channel 300—Go behind the scenes of your favorite TV shows.

• Help Channel 411—Get Vantage

TV by Frontier® service help

• Frontier Showcase Channel 800—Sample Vantage

TV by Frontier® high definition at no additional charge with rich and exotic footage of the world’s most beautiful places.

Easy system setup

You can program your Vantage

TV by Frontier® remote control and set your TV’s screen resolution and Parental Controls using the System Setup Tool:

1. Press MENU on your remote and use ARROWS to select Help.

2. Press OK to select System Setup.

Visit Frontier.com for more information

VANTAGETM TV BY FRONTIER® QUICK RESOLUTION GUIDE

Resolve Problems with Your TV Service

Don’t have picture or sound, but TV and receiver are both turned on?

1. Press TV on your remote control.

2. Press TV/VIDEO to see TV programming.

If you’re still having trouble with your Internet, TV and Voice services, try resetting your TV receiver or residential/wireless Router by unplugging it from the power outlet in the wall. (See below for details for alternate reset if you have different equipment.)

Note: Unplugging the TV receiver or residential/Wi-Fi Router will interrupt any recordings in progress.

If the trouble is with only one TV:

1. Turn off the receiver connected to that TV and unplug it.

2. Wait at least two minutes before plugging the receiver back in. Turn it on and retry what you want to do.

If the trouble is with more than one TV, or with Internet or Voice service:

1. Unplug the residential/Wi-Fi Router from the power source. (See below for alternate reset.)

2. Wait at least two minutes, then plug the residential/Wi-Fi Router back in and retry what you want to do. It may take up to ten minutes for the Router to reset.

Alternate reset: If your service is supported with a Home Network Hub and Power Supply Unit (PSU with battery backup), then you will need to press the Reset button on the left side of the PSU to reset Vantage

TV by Frontier® service. The PSU

may be located in the garage or a closet near an outside wall.

Want more help? Frontier Getting Started has answers all in one place online at Frontier.com/helpcenter. You can also chat live with an agent while getting started, or call 1.800.219.6877 and say, “Vantage

TV by Frontier® Technical Support.”

Visit Frontier.com for more information

Change Your TV’s Screen Resolution

1. Press MENU on the remote control, then use ARROWS to select Options and System Options, then press OK. Select TV Screen Resolution (HD/SD) and press OK.

2. Use UP/DOWN ARROWS to select Standard Definition, Widescreen Standard Definition, 720p High Definition or 1080i High Definition to match your TV’s capability, then press OK.

3. Use ARROWS to select Continue and press OK to access a Test Screen.

4. Select Start Test and press OK, then follow the prompts to verify that you have the correct setting. Once successful, be sure to save your format. You should now see a blue light on your receiver.

Program Your Remote to Control Up to Four Devices

During installation, the STB button was set up to control your Frontier HD-ready receiver. You can also control a TV plus up to two other devices such as a DVD player, stereo receiver or home theater in a box by programming the TV, DVD and AUX mode buttons. Once the devices are programmed, press the corresponding mode key on the remote to control that device.

Note: The instructions on page 6 don’t require you to enter a manufacturer’s device code because most codes are stored in the Vantage

TV by Frontier® remote control’s memory. If you’re unable to add a device, or want to learn about advanced features like reassigning mode buttons, refer to the remote’s manual provided at installation.

How to assign devices to TV-DVD-AUX mode buttons:

1. Power on the device to be programmed.

2. Point the remote control at the selected device.

3. Press and hold the mode key that matches the device you

want to program (TV, DVD or AUX) along with the ENTER key. Hold both keys for one second, then release. The four mode keys on the remote control flash twice to indicate you are in search mode.

Visit Frontier.com for more information

4. Search by pressing the SCAN/FF key repeatedly until the device turns OFF (the selected mode key will flash once for each press of the SCAN/FF key). Pause briefly between each key press to allow your device enough time to respond.

5. Press the POWER button on the remote control to turn the device back on.

Note: If the device does not turn off and you have searched all available codes, the selected mode key will flash eight times. If this happens, please start over.

If the device does not turn on, you may have pressed the

SCAN/FF key too many times. Press the REW/SCAN key

to scan backwards and test the POWER button again.

6. Check VOLUME and MUTE. Do not test using REW/SCAN,

SCAN/FF, FWD or EXIT. If there is any problem with any

of the keys, press the SCAN/FF button and search until you find a code that will operate all the functions properly.

7. Press the ENTER key to save the programming. The appropriate mode key will give a long flash, indicating successful programming.

Note: If the programming is interrupted or inactive for more than 30 seconds, the mode keys will flash eight times. This indicates the remote has left the programming mode and returned to normal operation without saving any changes.

If you have an integrated or combination unit such as TV-DVD, TV-DVD-VCR, etc., each component of the unit may need to be programmed separately by using the mode keys. For instance, for a TV-DVD, search for the device code of TV and program into the TV mode key, then search for the device code of DVD and program into the DVD mode key.

Want more help? Check the remote’s user manual provided at installation, or watch Help On Demand on TV: Press MENU, select Help, then Help On Demand to see all program titles.

Change Your TV’s Input Selection to Match Its Video Source

If you’re unable to see TV programs on your screen, first try pressing the TV/VIDEO button on your remote control to change from Video 1 to Video 2 or Video 3. These separate video inputs (Video 1, Video 2 and Video 3) must match the

Visit Frontier.com for more information

incoming video source—the receiver, DVD player or other device connected to the TV. If this doesn’t solve the problem, depending on how your devices are connected, it may be that the TV’s input selection does not correspond to the input of the VantageTM TV by Frontier® receiver. See three examples of how to connect the HD-ready receiver to your HDTV set on pages 43-44.

Check Device Connections for Your TV

TV screen menus and port configurations vary. Most devices have ports that require one or more of the cables shown below. The manuals for your devices will have specific directions.

To connect your Frontier HD-ready receiver to your HDTV set, the connection is generally HDMI to HDMI (the highest quality video/audio connection). You can also use color-coded component RCA cables (some HDTV sets do not have an HDMI port) that deliver audio/video signals from the receiver and plug into matching audio/video RCA inputs on the back of your HDTV set. If you’ve connected your TV input using Composite (yellow connector), S-Video or Coaxial, you won’t get an HD picture. HD is supported only via HDMI or Component (red/green/blue). The same holds true for Dolby

Digital 5.1 surround sound, which is available only via HDMI or TOS Link (optical). The Baseband (red and white connectors) delivers sound only in stereo.

Check to See if the TV Recognizes Your Video Inputs Correctly

Many newer TVs have an auto-detection system that will automatically detect equipment connected to the various ports on the TV. However, some TVs have to be configured manually.

To change the video input selection manually, press TV/VIDEO on your remote control to locate the video input menu for your specific TV.

Visit Frontier.com for more information

The video input menu screen shows checkboxes next to devices the TV is detecting. This menu must match the inputs on the back of the TV where video components are connected in order to correspond with Video 1, Video 2 or Video 3 on your remote control. Follow the screen prompts to check/uncheck boxes for your devices.

Note: Refer to your TV manufacturer’s guide to resolve issues specifically related to your TV.

Choose One of Three Easy Ways to Connect Your Vantage

TV by Frontier® Receiver to Your TV

Vantage

TV by Frontier® receiver output connector

• HDMI

Some HDTVs have a High-Definition Multimedia Interface

(HDMI) connector that provides the digital and audio connection. This is the easiest connection if your TV has an HDMI input port.

Note: If your HDTV has an input port marked DVI (Digital

Visual Interface), you will need an HDMI-to-DVI adapter and separate component RCA audio connectors.

Visit Frontier.com for more information

• Color-coded component connectors

If your TV doesn’t have an HDMI or DVI input port, you can use color-coded component video cables (Pr, Pb and Y) for HD video signals. For audio, plug red and white RCA connectors into the left/right audio input and output ports.

Vantage

TV by Frontier® receiver output connectors

• S-Video

If your TV has an S-Video port, you can connect your

receiver to your TV using an S-Video cable. For audio, you can use RCA cables or plug a single optical cable into the optical ports.

Watch Help On Demand—Tune to Channel 411

Get more out of your Frontier service: Watch Help On Demand videos about these topics on Channel 411, the Help Channel.

These videos will walk you through how to customize and use your Frontier equipment, record your favorite shows, take advantage of your interactive television or voice services, troubleshoot issues and other features that will allow you to enhance your Vantage

TV by Frontier® experience.

Visit Frontier.com for more information

YOUR IMPORTANT FRONTIER INFORMATION

Record your important Frontier information here for easy reference.

With all your key information in one place, it’s a snap to manage your account and get support when you need it. For your own security, if you need to record account passwords, write them down separately and keep them in a safe place.

General Information

Customer name on account

Billing telephone number

Frontier primary member ID (Frontier email address)

Frontier primary member password

VM PIN #

Frontier password hint, if applicable

Your Frontier services were installed by

Wireless (RESIDENTIAL) Router Information

Manufacturer and model number

Wi-Fi network name (SSID)

Wi-Fi password (required for home Wi-Fi access)

Your Frontier primary member ID allows you to manage your account online. You can view and pay your bill, enroll in paperless billing, sign up for Frontier Auto-Pay, upgrade your account, get updates regarding your Frontier service and so much more.

Upgrade or add services anytime. Visit Frontier.com.

We’re always here to help: Visit Frontier.com or call 1.800.219.6877 and say, “Vantage

TV by Frontier® Technical Support.”

Visit Frontier.com for more information

SUPPORT QUESTIONS/ADDITIONAL RESOURCES

Accessibility Support

Customers with Disabilities Voice Clls: 1.800.288.8303 TTY Calls: 1.877.462.6606

Customer Service

Residential Customers 1.800.921.8101 Business Customers: 1.800.921.8102

Repair Center

Voice Calls: 1.800.921.8104 TTY Calls: 1.877.462.6606

Get answers 24/7 at Frontier.com/helpcenter/contact-us or chat live with a Frontier representative.

Learn more about Frontier Communications products and services at Frontier.com.

Here are other ways you can quickly learn more:

• Tune to video tutorials on Help Channel 411.

• Click Frontier.com/helpcenter for support including live chat.

Take advantage of Frontier’s 24/7 customer support

at Frontier.com/HelpCenter/Contact-Us or for

Residential 1.800.921.8101 and for Business 1.800.921.8102

FTR_002677_VTV_O_100116

Frontier vantage User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual