Fronius Welding Protection Paste Safety data sheet [EN]

Page 1/8

Safety data sheet

according to 1907/2006/EC

Printing date 26.04.2022 Revision: 26.04.2022Version number 1.1 (replaces version 1.0)

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier

Trade name:

Article number:

Welding protection paste

42,0510,0013

1.2 Relevant identified uses of the substance or mixture and uses advised against

Application of the substance / the mixture

Protective paste for burner nozzles

1.3 Details of the supplier of the safety data sheet

Manufacturer/Supplier:
Fronius International GmbH

Fronius Straße 5
A-4642 Sattledt
T: [phone]

Further information obtainable from:

[e-mail]
[e-mail]

1.4 Emergency telephone number:

[phone]
Available:
Mo - Th: 08:00 - 16:00 h (CET)
Fr: 08:00 - 12:00 h (CET)

Call the national emergency number!

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008

The product is not classified, according to the GB CLP regulation.

2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008
Hazard pictograms
Signal word

Void

Hazard statements

Void

Void

Void

2.3 Other hazards
Results of PBT and vPvB assessment
PBT:

No data available.

vPvB:

No data available.

SECTION 3: Composition/information on ingredients

3.2 Mixtures
Description:

Mixture of hydrocarbons.

(Contd. on page 2)

GB

54.0.17

Page 2/8

Safety data sheet

according to 1907/2006/EC

Printing date 26.04.2022 Revision: 26.04.2022Version number 1.1 (replaces version 1.0)

Trade name:

Dangerous components:

Welding protection paste

(Contd. of page 1)

None.

SECTION 4: First aid measures

4.1 Description of first aid measures
General information:

Seek medical treatment in case of complaints.
If unconscious, use a stable lateral position and do not administer anything through mouth.

After inhalation:

Supply fresh air; consult doctor in case of complaints.

After skin contact:

Wash with plenty of soap and water.
Seek medical treatment in case of complaints.

After eye contact:

Rinse opened eye for several minutes under running water.
Remove contact lenses, if present and easy to do. Continue rinsing.
Seek medical treatment.

After swallowing:

Do NOT induce vomiting.
Call a doctor immediately.

4.2 Most important symptoms and effects, both acute and delayed

IF SWALLOWED:
Gastric or intestinal disorders

4.3 Indication of any immediate medical attention and special treatment needed

Depending on the condition of the patients, the doctor must assess the symptoms and the overall general
condition.

SECTION 5: Firefighting measures

5.1 Extinguishing media
Suitable extinguishing agents:

Fire-extinguishing powder
Foam
Carbon dioxide

For safety reasons unsuitable extinguishing agents:

Water

5.2 Special hazards arising from the substance or mixture

Formation of toxic gases is possible during heating or in case of fire.

5.3 Advice for firefighters
Protective equipment:

Wear self-contained respiratory protective device.
Wear fully protective suit.

Additional information

Collect contaminated fire fighting water separately. It must not enter the sewage system.

(Contd. on page 3)

GB

54.0.17

Page 3/8

Safety data sheet

according to 1907/2006/EC

Printing date 26.04.2022 Revision: 26.04.2022Version number 1.1 (replaces version 1.0)

Trade name:

Welding protection paste

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Restricted access to the affected area until cleaning work is completed.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Avoid contact with skin and eyes.
Particular danger of slipping on leaked/spilled product.

6.2 Environmental precautions:

Do not allow to enter sewers/ surface or ground water.

6.3 Methods and material for containment and cleaning up:

Pick up mechanically.
Dispose of the material collected according to regulations.

6.4 Reference to other sections

See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

SECTION 7: Handling and storage

(Contd. of page 2)

7.1 Precautions for safe handling

Ensure good ventilation/exhaustion at the workplace.
Keep receptacles tightly sealed.
Avoid contact with skin and eyes.
Use personal protective equipment as required.
Observe protective measures and safety instructions.

Information about fire - and explosion protection:

Keep ignition sources away - Do not smoke.

7.2 Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:

Store in a cool location.
Store receptacle in a well ventilated area.
Store in dry conditions.
Store in accordance with local/regional/national/international regulations.

Information about storage in one common storage facility:

Store away from oxidising agents.

Further information about storage conditions:

Keep container tightly sealed.
Protect from heat and direct sunlight.

Recommended storage temperature:
Storage class:

7.3 Specific end use(s)

11

No further relevant information available.

room temperature

(Contd. on page 4)

GB

54.0.17