TransTig 1750 Puls
Quick Reference
GB
TIG - Setup
Spot welding time
Tacking
Frequency pulsing
Duty cycle*
Ground current*
Starting current time
End current time
Factory
2nd-Menu
+
Special 4-step mode
High frequency time
Ignition time-out
Arc break watchdog
s/over to main current
or
Main parameters
Electrode diameter
Starting current
Upslope
Main current
Reduced current*
Downslope
Final current
+
Change
parameter(s)
Display software
version
Rod electrode - Setup
Hotstart current
Hot-current time
Dynamic correction
Factory
2nd-Menu
Anti-Stick
Voltage limitation
Gas - Setup
+
Gas pre-flow time
Gas post-flow time at l-min
Gas post-flow time at l-max
Gas purging
or
+
* ... with activated pulse frequency
42,0426,0105,EN 01/2022
* ... 4-step mode
Exit set-up
Fronius International GmbH, www.fronius.com
Text and illustrations were accurate at the time of printing. Subject to change without notice.
Loading...