Page 1/13
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/25/2022 Reviewed on 04/25/2022
* 1
Identification
Product identifier
Trade name:
Article number:
Application of the substance / the mixture
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Fronius International GmbH
Fronius Straße 5
A-4642 Sattledt
T: +43 7242 241 0
Information department:
welding.techsupport@fronius.com
msds.techsupport@fronius.com
Emergency telephone number:
+43 7242 241 0
Available:
Mo - Th: 08:00 - 16:00 h (CET)
Fr: 08:00 - 12:00 h (CET)
Please contact your regional poison center or emergency call!
Welding Torch - Coolant
40,0009,0046 / 40,0009,0075 / 40,0009,0077
Cooling fluid for corresponding Fronius welding systems
2 Hazard(s) identification
Classification of the substance or mixture
Flammable Liquids 3 H226 Flammable liquid and vapor.
Carcinogenicity 1A H350 May cause cancer.
Additional information:
Label elements
GHS label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS02
Signal word
Hazard-determining components of labeling:
ethanol
Hazard statements
Flammable liquid and vapor.
GHS08
Danger
For the wording of the hazard categories, see section 16.
(Contd. on page 2)
US
54.0.17
Page 2/13
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/25/2022 Reviewed on 04/25/2022
Trade name:
May cause cancer.
Precautionary statements
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Keep container tightly closed.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF exposed or concerned: Get medical advice/attention.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 - 4)
0
Welding Torch - Coolant
Health = 0
3
0
Fire = 3
Reactivity = 0
(Contd. of page 1)
HMIS-ratings (scale 0 - 4)
HEALTH
FIRE
REACTIVITY
Other hazards
Results of PBT and vPvB assessment
PBT:
The mixture does not contain PBT substances ≥ 0,1 %.
vPvB:
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:
Dangerous components:
[% (w/w)]
The mixture does not contain vPvB substances ≥ 0,1 %.
*0
Health = *0
Fire = 3
3
Reactivity = 0
0
Mixture of the substances listed below with nonhazardous additions.
(Contd. on page 3)
US
54.0.17
Page 3/13
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/25/2022 Reviewed on 04/25/2022
Trade name:
CAS: 64-17-5 ethanol
Welding Torch - Coolant
Flammable Liquids 2, H225
Carcinogenicity 1A, H350
Eye Irritation 2A, H319
(Contd. of page 2)
10 - ≤ 24%
Specific concentration limit: Eye Irrit. 2; H319: C ≥ 50 %
CAS: 78-93-3 butanone
Flammable Liquids 2, H225
Eye Irritation 2A, H319; Specific Target Organ Toxicity - Single Exposure 3,
<0.25%
H336
4 First-aid measures
Description of first aid measures
General information:
Seek medical treatment in case of complaints.
If unconscious, use a stable lateral position and do not administer anything through mouth.
After inhalation:
Supply fresh air; consult doctor in case of complaints.
After skin contact:
Wash with plenty of water.
Take off contaminated clothing and wash it before reuse.
Seek medical treatment in case of complaints.
After eye contact:
Rinse opened eye for several minutes under running water.
Remove contact lenses, if present and easy to do. Continue rinsing.
Seek medical treatment in case of complaints.
After swallowing:
Rinse out mouth and then drink plenty of water.
Seek medical treatment.
Most important symptoms and effects, both acute and delayed
No further relevant information available.
Indication of any immediate medical attention and special treatment needed
Depending on the condition of the patients, the doctor must assess the symptoms and the overall general
condition.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents:
Water with full jet
Special hazards arising from the substance or mixture
Combustible.
Fumes can combine with air to form an explosive mixture.
In case of fire, the following can be released:
CO
x
(Contd. on page 4)
US
54.0.17
Page 4/13
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/25/2022 Reviewed on 04/25/2022
Trade name:
Welding Torch - Coolant
Advice for firefighters
Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.
Additional information
Cool endangered receptacles with water spray.
6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Restricted access to the affected area until cleaning work is completed.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Avoid contact with skin and eyes.
Do not breathe vapour/spray.
Keep away from ignition sources
Environmental precautions:
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding, inert material (sand, diatomite, acid binders, universal binders).
Ensure adequate ventilation.
Dispose of the collected material according to regulations.
Protective Action Criteria for Chemicals
(Contd. of page 3)
PAC-1:
CAS: 64-17-5 ethanol 1,800 ppm
CAS: 78-93-3 butanone 200 ppm
PAC-2:
CAS: 64-17-5 ethanol 3300* ppm
CAS: 78-93-3 butanone 2700* ppm
PAC-3:
CAS: 64-17-5 ethanol 15000* ppm
CAS: 78-93-3 butanone 4000* ppm
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Keep receptacles tightly sealed.
Avoid contact with skin and eyes.
Avoid breathing mist/vapours/spray.
Use personal protective equipment as required.
Observe protective measures and safety instructions.
(Contd. on page 5)
US
54.0.17
Loading...