Fronius Torch Coolant PIPE Safety data sheet [EN]

Page 1/10

Safety data sheet

according to 1907/2006/EC

Printing date 25.04.2022 Revision: 25.04.2022Version number 1.2 (replaces version 1.1)

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier

Trade name:

Article number:

1.2 Relevant identified uses of the substance or mixture and uses advised against

Application of the substance / the mixture

1.3 Details of the supplier of the safety data sheet

Manufacturer/Supplier:
Fronius International GmbH

Fronius Straße 5
A-4642 Sattledt
T: [phone]

Further information obtainable from:

[e-mail]
[e-mail]

1.4 Emergency telephone number:

[phone]
Available:
Mo - Th: 08:00 - 16:00 h (CET)
Fr: 08:00 - 12:00 h (CET)

Welding Torch - Coolant PIPE

40,0009,0079

Cooling fluid for corresponding Fronius welding systems

Call the national emergency number!

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008

Acute Tox. 4 H302 Harmful if swallowed.

STOT RE 2 H373 May cause damage to the kidneys through prolonged or repeated exposure. Route of

exposure: Oral.

Additional information:

2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008

The product is classified and labelled according to the GB CLP regulation.

Hazard pictograms



GHS07



GHS08

For the wording of the hazard categories, see section 16.

Signal word

54.0.17

Warning

(Contd. on page 2)

GB

Page 2/10

Safety data sheet

according to 1907/2006/EC

Printing date 25.04.2022 Revision: 25.04.2022Version number 1.2 (replaces version 1.1)

Trade name:

Welding Torch - Coolant PIPE

(Contd. of page 1)

Hazard-determining components of labelling:

ethanediol

Hazard statements

H302 Harmful if swallowed.
H373 May cause damage to the kidneys through prolonged or repeated exposure. Route of exposure: Oral.

Precautionary statements

P260 Do not breathe mist/vapours/spray.
P264 Wash thoroughly after handling.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P330 Rinse mouth.
P314 Get medical advice/attention if you feel unwell.
P501 Dispose of contents/container in accordance with local/regional/national/international

regulations.

2.3 Other hazards
Results of PBT and vPvB assessment
PBT:

The mixture does not contain PBT substances ≥ 0,1 %.

vPvB:

The mixture does not contain vPvB substances ≥ 0,1 %.

SECTION 3: Composition/information on ingredients

3.2 Mixtures
Description:

Mixture of substances listed below with nonhazardous additions.

Dangerous components:

[% (w/w)]

CAS: 107-21-1
EINECS: 203-473-3

ethanediol

STOT RE 2, H373



Acute Tox. 4, H302



Index number: 603-027-00-1
Reg.nr.: 01-2119456816-28-XXXX

Additional information:

For the wording of the listed hazard phrases refer to section 16.

SECTION 4: First aid measures

4.1 Description of first aid measures
General information:

Seek medical treatment in case of complaints.
In case of unconsciousness place patient stably in side position for transportation.

After inhalation:

Supply fresh air; consult doctor in case of complaints.

After skin contact:

Wash with plenty of soap and water.
Take off contaminated clothing and wash it before reuse.
Seek medical treatment in case of complaints.

After eye contact:

Rinse opened eye for several minutes under running water.
Remove contact lenses, if present and easy to do. Continue rinsing.
Seek medical treatment in case of complaints.

50 – 60%

(Contd. on page 3)

GB

54.0.17

Page 3/10

Safety data sheet

according to 1907/2006/EC

Printing date 25.04.2022 Revision: 25.04.2022Version number 1.2 (replaces version 1.1)

Trade name:

Welding Torch - Coolant PIPE

(Contd. of page 2)

After swallowing:

Rinse mouth.
Do NOT induce vomiting.
Call a doctor immediately.

4.2 Most important symptoms and effects, both acute and delayed

No further relevant information available.

4.3 Indication of any immediate medical attention and special treatment needed

Depending on the condition of the patients, the doctor must assess the symptoms and the overall general
condition.

SECTION 5: Firefighting measures

5.1 Extinguishing media
Suitable extinguishing agents:

CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

For safety reasons unsuitable extinguishing agents:

Water with full jet

5.2 Special hazards arising from the substance or mixture

During heating or in case of fire poisonous gases are produced.

5.3 Advice for firefighters
Protective equipment:

Wear self-contained respiratory protective device.
Wear fully protective suit.

Additional information

Cool endangered receptacles with water spray.
Do not inhale explosion gases or combustion gases.

SECTION 6: Accidental release measures

6.1 Personal precautions, protective equipment and emergency procedures

Restricted access to the affected area until cleaning work is completed.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Avoid contact with skin and eyes.
Do not breathe vapour/spray.

6.2 Environmental precautions:

Do not allow to enter sewers/ surface or ground water.
Inform respective authorities in case of seepage into water course or sewage system.

6.3 Methods and material for containment and cleaning up:

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.

6.4 Reference to other sections

See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

(Contd. on page 4)

GB

54.0.17