Page 1/11
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/25/2022 Reviewed on 04/25/2022
1 Identification
Product identifier
Trade name:
Article number:
Application of the substance / the mixture
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Fronius International GmbH
Fronius Straße 5
A-4642 Sattledt
T: +43 7242 241 0
Information department:
welding.techsupport@fronius.com
msds.techsupport@fronius.com
Emergency telephone number:
+43 7242 241 0
Available:
Mo - Th: 08:00 - 16:00 h (CET)
Fr: 08:00 - 12:00 h (CET)
Please contact your regional poison center or emergency call!
Welding Torch - Coolant INDOOR
40,0009,0084
Cooling fluid for corresponding Fronius welding systems
2 Hazard(s) identification
Classification of the substance or mixture
Flammable Liquids 4 H227 Combustible liquid.
Carcinogenicity 1A H350 May cause cancer.
Label elements
GHS label elements
The product is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS08
Signal word
Hazard-determining components of labeling:
ethanol
Hazard statements
Combustible liquid.
May cause cancer.
Danger
(Contd. on page 2)
US
54.0.17
Page 2/11
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/25/2022 Reviewed on 04/25/2022
Trade name:
Precautionary statements
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Keep away from flames and hot surfaces. – No smoking.
Wear protective gloves/protective clothing/eye protection/face protection.
IF exposed or concerned: Get medical advice/attention.
In case of fire: Use CO2, powder or water spray to extinguish.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 - 4)
0
HMIS-ratings (scale 0 - 4)
Welding Torch - Coolant INDOOR
Health = 0
2
0
Fire = 2
Reactivity = 0
(Contd. of page 1)
HEALTH
FIRE
REACTIVITY
Other hazards
Results of PBT and vPvB assessment
PBT:
The mixture does not contain PBT substances ≥ 0,1 %.
vPvB:
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description:
Dangerous components:
[% (w/w)]
CAS: 64-17-5 ethanol
The mixture does not contain vPvB substances ≥ 0,1 %.
*0
Health = *0
Fire = 2
2
Reactivity = 0
0
Mixture of the substances listed below with nonhazardous additions.
Flammable Liquids 2, H225
Carcinogenicity 1A, H350
Eye Irritation 2A, H319
Specific concentration limit: Eye Irrit. 2; H319: C ≥ 50 %
1 – < 5%
4 First-aid measures
Description of first aid measures
General information:
Seek medical treatment in case of complaints.
(Contd. on page 3)
US
54.0.17
Page 3/11
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/25/2022 Reviewed on 04/25/2022
Trade name:
Welding Torch - Coolant INDOOR
(Contd. of page 2)
If unconscious, use a stable lateral position and do not administer anything through mouth.
After inhalation:
After skin contact:
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
After eye contact:
Rinse opened eye for several minutes under running water.
Remove contact lenses, if present and easy to do. Continue rinsing.
Seek medical treatment in case of complaints.
After swallowing:
Rinse out mouth and then drink plenty of water.
If symptoms persist consult doctor.
Most important symptoms and effects, both acute and delayed
No further relevant information available.
Indication of any immediate medical attention and special treatment needed
Depending on the condition of the patients, the doctor must assess the symptoms and the overall general
condition.
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
For safety reasons unsuitable extinguishing agents:
Special hazards arising from the substance or mixture
Water with full jet
No further relevant information available.
Advice for firefighters
Protective equipment:
Wear self-contained respiratory protective device.
Wear fully protective suit.
6 Accidental release measures
Personal precautions, protective equipment and emergency procedures
Restricted access to the affected area until cleaning work is completed.
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Avoid contact with skin and eyes.
Avoid breathing mist/vapours/spray.
Environmental precautions:
Do not allow to enter sewers/ surface or ground water.
Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose of the collected material according to regulations.
Protective Action Criteria for Chemicals
PAC-1:
CAS: 64-17-5 ethanol 1,800 ppm
PAC-2:
CAS: 64-17-5 ethanol 3300* ppm
(Contd. on page 4)
US
54.0.17
Page 4/11
Safety Data Sheet
acc. to according to GHS Rev. 8 2019 and OSHA HCS
Printing date 04/25/2022 Reviewed on 04/25/2022
Trade name:
Welding Torch - Coolant INDOOR
(Contd. of page 3)
PAC-3:
CAS: 64-17-5 ethanol 15000* ppm
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Keep receptacles tightly sealed.
Avoid contact with skin and eyes.
Avoid breathing mist/vapours/spray.
Use personal protective equipment as required.
Observe protective measures and safety instructions.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:
Store in a cool location.
Store receptacle in a well ventilated area.
Store in accordance with local/regional/national/international regulations.
Information about storage in one common storage facility:
Further information about storage conditions:
Recommended storage temperature:
Storage class:
Specific end use(s)
10
No further relevant information available.
room temperature
Keep receptacle tightly sealed.
Not required.
* 8
Exposure controls/personal protection
Control parameters
Components with limit values that require monitoring at the workplace:
CAS: 64-17-5 ethanol
PEL Long-term value: 1900 mg/m³, 1000 ppm
REL Long-term value: 1900 mg/m³, 1000 ppm
TLV Short-term value: 1000 ppm
A3
Regulatory information
PEL: Guide to Occupational Exposure Values (OSHA PELs)
REL: Guide to Occupational Exposure Values (NIOSH RELs)
TLV: Guide to Occupational Exposure Values (TLV)
Additional information:
54.0.17
The lists that were valid during the creation were used as basis.
(Contd. on page 5)
US
Loading...