/
Perfect Welding / Solar Energy / Perfect Charging
TIG CLADDING TORCHES
TTHW/TTW
/ Workpiece inner diameter
25/35/45/76/125/150 mm (1/1.4/1.8/3/4.9/5.9 in)
/ FROM Ø 25 MM (1 IN)
/ WATERCOOLED
/ TTHW machine torches are mainly used for mechanized overlay welding. The robust design provides a stable torch
movement. Work pieces from inner diameter 25 mm (1 in) can be welded with the smallest torch. All torches are
prepared for water cooling, which allows longer duty cycles.
/ TTW machine torches are used for joint and overlay welding.
TTHW5000M Ø125
/ The TTHW5000M Ø125 is the most powerful TTHW single
torch allowing welding currents up to 400 A. The minimum
required inner work piece diameter is 125 mm (4.9 in). Vari-
ous extensions provide a wide range of use. An optional Twin
upgrade offers an additional wire feed. Depending on the ap-
plication different working lengths are available
1,0/1,5/1,8/2,0 m (39.4/59.1/70.9/78.7 in).
ACCessories
/ exTensions 15/25/38 MM (0.6/1/1.5 in)
HW-READY
FeATures
/ PoWerFuL 400 A
/ TorCH HeAD 0-90°
/ WATer CooLing sysTeM
/ HoTWire reADy
/ roBusT AnD MoDuLAr Design
/ 100% DuTy CyCLe
/ oPTion TWin
/ exTensions WiTH eLBoW 30/64/124 MM (1.2/2.5/4.9 in)
/ Those Extensions are exclusively used with ETR systems
for extending the diameter
range.
/ TorCH HeAD Fixing 0°/30°/45°/60°/90°/uni
/ The notched torch head can
be locked in different angle
with a locking pin. The UNI
torch head allows locking of
all angle and stepless swivelling.
/ TWin – ADDiTionAL Wire FeeD
/ Option Twin provides an additional wire feed.
Ø min. 125 mm
(4.9 in)
Working length max. 2000
mm (78.7 in)
TeCHniCAL DATA
TTHW5000M Ø125
Inner work piece diameter from 125 mm (4.9 in)
Welding current max. 400 A
Wire diameter 1,0/1,2/1,6 mm (0.039/0,047/0.063 in)
Electrode diameter
Flow rate water cooling system min. 1,0 l/min
WL (working length)
A
B (xing sleeve) 50 mm (2 in)
C 44 mm (1.7 in)
D 34 mm (1.3 in)
A
BDC
1,6/2,4/3,2/4,0 mm
(0.063/0.094/0.126/0.157 in)
1000/1500/1800/2000 mm
(39.4/59.1/70.9/78.7 in)
1440/1940/2240/2518 mm
(56.7/76.4/88.2/99.1 in)
WL
TTHW4000M Ø76
/ The TTHW4000M Ø76 allows welding currents up to 350 A.
The minimum required inner work piece diameter is 76 mm
(3 in). Depending on the application different working lengths
are available 1,0/1,5/1,8 m (39.4/59.1/70.9 in).
ACCessories
/ exTensions 15 MM (0.6 in)
HW-READY
FeATures
/ PoWerFuL 350 A
/ TorCH HeAD 0-90°
/ WATer CooLing sysTeM
/ HoTWire reADy
/ roBusT AnD MoDuLAr Design
/ 100% DuTy CyCLe
/ exTensions WiTH eLBoW 30/64/124 MM (1.2/2.5/4.9 in)
/ Those Extensions are exclusively used with ETR systems
for extending the diameter
range.
/ TorCH HeAD Fixing 0°/30°/45°/60°/90°/uni
/ The notched torch head can
be locked in different angle
with a locking pin. The UNI
torch head allows locking of
all angle and stepless swivelling.
Ø min. 76 mm
(3 in)
working length max.
1800 mm (70.9 in)
TeCHniCAL DATA
TTHW4000M Ø76
Inner work piece diameter from 76 mm (3 in)
Welding current max. 350 A
Wire diameter 1,0/1,2/1,6 mm (0.039/0,047/0.063 in)
Electrode diameter 1,6/2,4/3,2 mm (0.063/0.094/0.126 in)
Flow rate water cooling system min. 1,0 l/min
WL (working length)
A
B (xing sleeve) 50 mm (2 in)
C 44 mm (1.7 in)
D 34 mm (1.3 in)
BDC
1000/1500/1800 mm
1440/1940/2240 mm
A
WL
(39.4/59.1/70.9 in)
(56.7/76.4/88.2 in)
Loading...